David J. Corr
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
David J. Corr has a total of 78 co-authors. Here are the top co-authors by number of shared publications:
Surendra P. Shah
26 shared publications- Shiho Kawashima
Columbia University
9 shared publications - Pengkun Hou
School of Materials Science and Engineering, University of Jinan, Jinan 250022, China
5 shared publications Deyu Kong
4 shared publications- Lori Graham-Brady
Department of Civil and Systems Engineering, Johns Hopkins University 1 , Baltimore, Maryland 21218
4 shared publications - Jian Ouyang
Hainan Univ
3 shared publications
Latest Publications
- 1 August 2019
- Published by Springer Nature in Journal of Wuhan University of Technology-Mater. Sci. Ed.
- Vol. 34 (4) , 893-899
Mechanical Properties of Micro-regions in Cement-based Material based on the PeakForce QNM Mode of AFM
- 1 August 2019
- Published by Springer Nature in Journal of Wuhan University of Technology-Mater. Sci. Ed.
- Vol. 34 (4) , 893-899
Mechanical Properties of Micro-regions in Cement-based Material based on the PeakForce QNM Mode of AFM
- 8 May 2019
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2673 (9) , 365-376
Comparative Study of Predictive Analysis Methods to Estimate Bridge Response
Monitoring bridge performance is crucial to ensure safety and allocate resources in a cost-effective manner. This paper aims to reduce the gap between researchers and practitioners by showing how predictive analytics can be employed in the process of distilling operational information out of bridge monitoring data. Furthermore, it has the goal to aid infrastructure owners and managers in evaluating bridge performance over time and making data-driven decisions to prolong the life of the structure. To achieve this goal, the paper presents a comparative study of three predictive analysis models to estimate bridge response to heavy trucks: multilinear regression, artificial neural network, and regression tree. Following this comparison, an alternative strategy, based on the analysis of influential observations, is proposed. This approach brings together predictive power with other important capabilities such as explanatory capabilities and interpretability. The test bed structure is a short-span highway bridge which was monitored for 3 years using weigh-in-motion (traffic data) and structural health monitoring (bridge data) systems.
- 8 May 2019
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2673 (9) , 365-376
Comparative Study of Predictive Analysis Methods to Estimate Bridge Response
Monitoring bridge performance is crucial to ensure safety and allocate resources in a cost-effective manner. This paper aims to reduce the gap between researchers and practitioners by showing how predictive analytics can be employed in the process of distilling operational information out of bridge monitoring data. Furthermore, it has the goal to aid infrastructure owners and managers in evaluating bridge performance over time and making data-driven decisions to prolong the life of the structure. To achieve this goal, the paper presents a comparative study of three predictive analysis models to estimate bridge response to heavy trucks: multilinear regression, artificial neural network, and regression tree. Following this comparison, an alternative strategy, based on the analysis of influential observations, is proposed. This approach brings together predictive power with other important capabilities such as explanatory capabilities and interpretability. The test bed structure is a short-span highway bridge which was monitored for 3 years using weigh-in-motion (traffic data) and structural health monitoring (bridge data) systems.
- 1 May 2019
- Published by Elsevier in Cement and Concrete Composites
- Vol. 99, 130-139
Characterization of the interfacial transition zone of CNF-Reinforced cementitious composites
- 1 May 2019
- Published by Elsevier in Cement and Concrete Composites
- Vol. 99, 130-139
Characterization of the interfacial transition zone of CNF-Reinforced cementitious composites
- 1 February 2019
- Published by Elsevier in Construction and Building Materials
- Vol. 198, 106-119
Effect of graphene oxide on the hydration and microstructure of fly ash-cement system
- 1 February 2019
- Published by Elsevier in Construction and Building Materials
- Vol. 198, 106-119
Effect of graphene oxide on the hydration and microstructure of fly ash-cement system
- 11 January 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (4) , 045061
Effects of nanosilica on cement grain/C–S–H gel interfacial properties quantified by modulus mapping and nanoscratch
The modification effects of nanosilica, a widely used nanomaterial, on the cement grain/C-S-H gel interface of cement-based material at early ages are investigated. The mechanical properties, morphology, and chemical composition of the interface at nano-size are explored by quantitative modulus mapping based on scanning probe microscopy (SPM) and tribological nanoscratch coupled with scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS), for the interface in the form of an ultra-thin layer requires high spatial resolution techniques. The interface width as determined by the analysis on the variation of storage modulus and coefficient of friction (COF) is around 200 nm, which is irrelevant to the nanosilica addition; however, the incorporation of nanosilica improves the nanomechanical performance of the interface significantly. The densification of the interfacial region by nanosilica, which is mainly attributed to the pore refinement, is confirmed by morphological characterization. It has been proven by EDS analysis that Ca/Si ratio provides evidence for the location of the interface and the modification effects by nanosilica.
- 11 January 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (4) , 045061
Effects of nanosilica on cement grain/C–S–H gel interfacial properties quantified by modulus mapping and nanoscratch
The modification effects of nanosilica, a widely used nanomaterial, on the cement grain/C-S-H gel interface of cement-based material at early ages are investigated. The mechanical properties, morphology, and chemical composition of the interface at nano-size are explored by quantitative modulus mapping based on scanning probe microscopy (SPM) and tribological nanoscratch coupled with scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS), for the interface in the form of an ultra-thin layer requires high spatial resolution techniques. The interface width as determined by the analysis on the variation of storage modulus and coefficient of friction (COF) is around 200 nm, which is irrelevant to the nanosilica addition; however, the incorporation of nanosilica improves the nanomechanical performance of the interface significantly. The densification of the interfacial region by nanosilica, which is mainly attributed to the pore refinement, is confirmed by morphological characterization. It has been proven by EDS analysis that Ca/Si ratio provides evidence for the location of the interface and the modification effects by nanosilica.
- 1 May 2018
- Published by Elsevier in Cement and Concrete Research
- Vol. 107, 49-63
Effect of interfacial transition zone on the Young's modulus of carbon nanofiber reinforced cement concrete
- 1 May 2018
- Published by Elsevier in Cement and Concrete Research
- Vol. 107, 49-63
Effect of interfacial transition zone on the Young's modulus of carbon nanofiber reinforced cement concrete
- 13 April 2018
- Published by Emerald Publishing in Advances in Cement Research
- Vol. 31 (8) , 353-361
FTIR study on early-age hydration of carbon nanotubes-modified cement-based materials
In this paper, the hydration process of Portland cement at early age was characterised by Fourier transform infrared spectroscopy (FTIR); the results showed that FTIR is a simple and rapid research method in operation, which can reflect the basic variation in the primary cement hydration products. As the hydration reaction proceeded, the peak value corresponding to silicon–oxygen (Si–O) vibrations in the FTIR spectrum shifted from low wavenumbers to high wavenumbers, which not only reflected the polymerisation process of silicon–oxygen tetrahedrons in the calcium–silicate–hydrate gel, but also the hydration reaction speed of cement paste at this stage. This was confirmed by experiment on samples with added superplasticiser. The shifting characteristics of the absorption peaks in the range 800–1025 cm−1 for samples at the ages of 8–12 h were comprehensively investigated in this study. The research results showed that the shifting speed of the characteristic peak for the blank sample was exactly the same as that for the sample reinforced with carbon nanotubes (CNTs). Therefore, the addition of CNT materials into Portland cement did not influence the hydration reaction at the early age. This conclusion was verified by the thermometry test for hydration temperature.
- 13 April 2018
- Published by Emerald Publishing in Advances in Cement Research
- Vol. 31 (8) , 353-361
FTIR study on early-age hydration of carbon nanotubes-modified cement-based materials
In this paper, the hydration process of Portland cement at early age was characterised by Fourier transform infrared spectroscopy (FTIR); the results showed that FTIR is a simple and rapid research method in operation, which can reflect the basic variation in the primary cement hydration products. As the hydration reaction proceeded, the peak value corresponding to silicon–oxygen (Si–O) vibrations in the FTIR spectrum shifted from low wavenumbers to high wavenumbers, which not only reflected the polymerisation process of silicon–oxygen tetrahedrons in the calcium–silicate–hydrate gel, but also the hydration reaction speed of cement paste at this stage. This was confirmed by experiment on samples with added superplasticiser. The shifting characteristics of the absorption peaks in the range 800–1025 cm−1 for samples at the ages of 8–12 h were comprehensively investigated in this study. The research results showed that the shifting speed of the characteristic peak for the blank sample was exactly the same as that for the sample reinforced with carbon nanotubes (CNTs). Therefore, the addition of CNT materials into Portland cement did not influence the hydration reaction at the early age. This conclusion was verified by the thermometry test for hydration temperature.
- 1 March 2018
- Published by Elsevier in Cement and Concrete Composites
- Vol. 87, 98-109
Whether do nano-particles act as nucleation sites for C-S-H gel growth during cement hydration?
- 1 March 2018
- Published by Elsevier in Cement and Concrete Composites
- Vol. 87, 98-109
Whether do nano-particles act as nucleation sites for C-S-H gel growth during cement hydration?