Rachel M. Novick
Research Subjects
Rachel M. Novick has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Andrew D. Monnot
Cardno ChemRisk, San Francisco, CA, USA
2 shared publications - Dennis J. Paustenbach
Cardno ChemRisk, Jackson, WY 83001, USA
2 shared publications - Derek A. Drechsel
Cardno ChemRisk, Boulder, CO 80301, USA
2 shared publications - Ernest S. Fung
Cardno ChemRisk, Aliso Viejo, CA, USA
2 shared publications - Kevin M. Towle
Cardno ChemRisk, San Francisco, CA, USA
2 shared publications - Cayla Poteete
Cardno ChemRisk, Aliso Viejo, CA 92656, USA
1 shared publication
Latest Publications
- Open Access
Screening-Level Safety Assessment of Personal Care Product Constituents Using Publicly Available Data
Organizations recommend evaluating individual ingredients when assessing the safety of personal care or cosmetic products. The goal of this study was to present a screening-level safety assessment methodology to evaluate the safety of a product by identifying individual ingredients, determining their frequency of use in on-market products, and examining published safe-level-of-use information for each ingredient. As a case study, we evaluated WEN by Chaz Dean (WCD) cleansing conditioners since there have been claims of adverse health effects associated with product use. We evaluated 30 ingredients in three on-market WCD cleansing conditioners. We then analyzed the National Library of Medicine’s Household Products Database and the Environmental Working Group’s (EWG) Skin Deep Cosmetic Database, two of the largest publicly available databases, for other on-market personal care and cosmetic products that contained these ingredients. Safe-level-of-use information for each ingredient was obtained by reviewing peer-reviewed literature, the Food and Drug Administration’s (FDA) generally recognized as safe (GRAS) database, available Cosmetic Ingredient Review (CIR) publications, and available product safety publications. The results of this analysis showed that more than 20,000 personal care and cosmetic products contained one or more of the evaluated ingredients used in WCD cleaning conditioners. Published safety information was available for 21 of the 30 evaluated ingredients: seven identified ingredients were designated as GRAS by the FDA and 16 ingredients had safe-level-of-use information available from the CIR. This study presents a screening-level safety assessment methodology that can serve as an initial screening tool to evaluate the safety of an ingredient intended for use in personal care and cosmetic products before a product is launched onto the market. This study provides evidence that the evaluated WCD cleansing conditioner ingredients are commonly used in other personal care and cosmetic products, and ingredients with available safety information are generally considered safe for the intended use. The scope of this analysis is limited to frequency of use information and available toxicological data. Additional testing including in silico, in vitro, and clinical studies may be needed to evaluate the potential toxicity of an ingredient.
Open AccessScreening-Level Safety Assessment of Personal Care Product Constituents Using Publicly Available Data
Organizations recommend evaluating individual ingredients when assessing the safety of personal care or cosmetic products. The goal of this study was to present a screening-level safety assessment methodology to evaluate the safety of a product by identifying individual ingredients, determining their frequency of use in on-market products, and examining published safe-level-of-use information for each ingredient. As a case study, we evaluated WEN by Chaz Dean (WCD) cleansing conditioners since there have been claims of adverse health effects associated with product use. We evaluated 30 ingredients in three on-market WCD cleansing conditioners. We then analyzed the National Library of Medicine’s Household Products Database and the Environmental Working Group’s (EWG) Skin Deep Cosmetic Database, two of the largest publicly available databases, for other on-market personal care and cosmetic products that contained these ingredients. Safe-level-of-use information for each ingredient was obtained by reviewing peer-reviewed literature, the Food and Drug Administration’s (FDA) generally recognized as safe (GRAS) database, available Cosmetic Ingredient Review (CIR) publications, and available product safety publications. The results of this analysis showed that more than 20,000 personal care and cosmetic products contained one or more of the evaluated ingredients used in WCD cleaning conditioners. Published safety information was available for 21 of the 30 evaluated ingredients: seven identified ingredients were designated as GRAS by the FDA and 16 ingredients had safe-level-of-use information available from the CIR. This study presents a screening-level safety assessment methodology that can serve as an initial screening tool to evaluate the safety of an ingredient intended for use in personal care and cosmetic products before a product is launched onto the market. This study provides evidence that the evaluated WCD cleansing conditioner ingredients are commonly used in other personal care and cosmetic products, and ingredients with available safety information are generally considered safe for the intended use. The scope of this analysis is limited to frequency of use information and available toxicological data. Additional testing including in silico, in vitro, and clinical studies may be needed to evaluate the potential toxicity of an ingredient.
- Open Access
Chemical Stability Analysis of Hair Cleansing Conditioners under High-Heat Conditions Experienced during Hair Styling Processes
Chemical stability is a key component of ensuring that a cosmetic product is safe for consumer use. The objective of this study was to evaluate the chemical stability of commercially available hair cleansing conditioners subjected to high heat stresses from the styling processes of blow drying or straightening. Two hair cleansing conditioners were subjected to temperatures of 60 °C and 185 °C to simulate the use of a blow dryer or flatiron hair straightener, respectively and analyzed via Gas Chromatography-Mass Spectrometry (GC-MS), High-Performance Liquid Chromatography-UV (HPLC) and Fourier-Transform Infrared Spectroscopy (FT-IR) to capture a chemical profile of the samples. The resulting spectra from matched heated and unheated samples were compared to identify any changes in chemical composition. Overall, no differences in the spectra were observed between the heated and unheated samples at both temperatures evaluated. Specifically, no new peaks were observed during analysis, indicating that no degradation products were formed. In addition, all chemicals identified during GC-MS analysis were known listed ingredients of the products. In summary, no measurable changes in chemical composition were observed in the hair cleansing conditioner samples under high-heat stress conditions. The presented analytical methods can serve as an initial screening tool to evaluate the chemical stability of a cosmetic product under conditions of anticipated use.
Open AccessChemical Stability Analysis of Hair Cleansing Conditioners under High-Heat Conditions Experienced during Hair Styling Processes
Chemical stability is a key component of ensuring that a cosmetic product is safe for consumer use. The objective of this study was to evaluate the chemical stability of commercially available hair cleansing conditioners subjected to high heat stresses from the styling processes of blow drying or straightening. Two hair cleansing conditioners were subjected to temperatures of 60 °C and 185 °C to simulate the use of a blow dryer or flatiron hair straightener, respectively and analyzed via Gas Chromatography-Mass Spectrometry (GC-MS), High-Performance Liquid Chromatography-UV (HPLC) and Fourier-Transform Infrared Spectroscopy (FT-IR) to capture a chemical profile of the samples. The resulting spectra from matched heated and unheated samples were compared to identify any changes in chemical composition. Overall, no differences in the spectra were observed between the heated and unheated samples at both temperatures evaluated. Specifically, no new peaks were observed during analysis, indicating that no degradation products were formed. In addition, all chemicals identified during GC-MS analysis were known listed ingredients of the products. In summary, no measurable changes in chemical composition were observed in the hair cleansing conditioner samples under high-heat stress conditions. The presented analytical methods can serve as an initial screening tool to evaluate the chemical stability of a cosmetic product under conditions of anticipated use.
- 5 April 2015
- Published by Wiley in Photodermatology, Photoimmunology & Photomedicine
- Vol. 31 (4) , 212-223
Factors that influence sunscreen application thickness and potential preservative exposure
Summary: Background/Purpose: Studies have shown that individuals apply less than the 2 mg/cm2 lotion sunscreen needed to achieve the labeled SPF. However, there is little information regarding the application of spray and stick sunscreens. The objectives of this study were to measure the amount of sunscreen applied to skin by different application methods, to examine the relationship between application and demographic factors, and to evaluate the potential for sensitization from the preservative methylisothiazolinone (MI) in lotion sunscreens.Methods: Fifty‐two participants applied lotion, spray, and stick sunscreen and answered a questionnaire. Lotion sunscreens were tested for MI content, and a margin of safety for the induction of skin sensitization was calculated.Results: The geometric means for the application thickness of lotion, spray, and stick sunscreens were 1.1, 1.6, and 0.35 mg/cm2, respectively. Several factors influenced sunscreen application thickness, including age and skin type. The MI concentration in tested sunscreen lotions ranged from 8.1).Conclusions: In this study, sunscreen users applied different amounts of sunscreen depending on the application method, affording different levels of sun protection. Typical use of the sunscreens is not likely to result in MI sensitization.
- 5 April 2015
- Published by Wiley in Photodermatology, Photoimmunology & Photomedicine
- Vol. 31 (4) , 212-223
Factors that influence sunscreen application thickness and potential preservative exposure
Summary: Background/Purpose: Studies have shown that individuals apply less than the 2 mg/cm2 lotion sunscreen needed to achieve the labeled SPF. However, there is little information regarding the application of spray and stick sunscreens. The objectives of this study were to measure the amount of sunscreen applied to skin by different application methods, to examine the relationship between application and demographic factors, and to evaluate the potential for sensitization from the preservative methylisothiazolinone (MI) in lotion sunscreens.Methods: Fifty‐two participants applied lotion, spray, and stick sunscreen and answered a questionnaire. Lotion sunscreens were tested for MI content, and a margin of safety for the induction of skin sensitization was calculated.Results: The geometric means for the application thickness of lotion, spray, and stick sunscreens were 1.1, 1.6, and 0.35 mg/cm2, respectively. Several factors influenced sunscreen application thickness, including age and skin type. The MI concentration in tested sunscreen lotions ranged from 8.1).Conclusions: In this study, sunscreen users applied different amounts of sunscreen depending on the application method, affording different levels of sun protection. Typical use of the sunscreens is not likely to result in MI sensitization.
- 18 July 2013
- Published by Taylor & Francis in Journal of Toxicology and Environmental Health, Part A
- Vol. 76 (14) , 883-893
The Effect of Clothing Care Activities on Textile Formaldehyde Content
Textiles are commonly treated with formaldehyde-based residues that may potentially induce allergic contact dermatitis in sensitive individuals. This study examined the initial formaldehyde content in clothing and resulting changes due to care activities. Twenty clothing articles were examined and 17 of them did not have detectable levels of formaldehyde. One shirt contained a formaldehyde concentration of 3172 ppm, and two pairs of pants had formaldehyde concentrations of 1391 ppm and 86 ppm. The two highest results represent formaldehyde levels that are up to 40-fold greater than international textile regulations. The two items with the greatest formaldehyde content were washed and dried in a manner similar to that used by consumers, including hand and machine washing in hot or cold water followed by air or machine drying. The washing and drying procedures reduced formaldehyde levels to between 26 and 72% of untreated controls. Differences in the temperature or type of washing and drying did not result in a clear trend in the subsequent formaldehyde content. In addition, samples were hot ironed, which did not affect the formaldehyde content as significantly. Understanding the formaldehyde content in clothing and its potential reduction through care activities may be useful for manufacturers and formaldehyde-sensitive individuals.
- 18 July 2013
- Published by Taylor & Francis in Journal of Toxicology and Environmental Health, Part A
- Vol. 76 (14) , 883-893
The Effect of Clothing Care Activities on Textile Formaldehyde Content
Textiles are commonly treated with formaldehyde-based residues that may potentially induce allergic contact dermatitis in sensitive individuals. This study examined the initial formaldehyde content in clothing and resulting changes due to care activities. Twenty clothing articles were examined and 17 of them did not have detectable levels of formaldehyde. One shirt contained a formaldehyde concentration of 3172 ppm, and two pairs of pants had formaldehyde concentrations of 1391 ppm and 86 ppm. The two highest results represent formaldehyde levels that are up to 40-fold greater than international textile regulations. The two items with the greatest formaldehyde content were washed and dried in a manner similar to that used by consumers, including hand and machine washing in hot or cold water followed by air or machine drying. The washing and drying procedures reduced formaldehyde levels to between 26 and 72% of untreated controls. Differences in the temperature or type of washing and drying did not result in a clear trend in the subsequent formaldehyde content. In addition, samples were hot ironed, which did not affect the formaldehyde content as significantly. Understanding the formaldehyde content in clothing and its potential reduction through care activities may be useful for manufacturers and formaldehyde-sensitive individuals.