Byron Ho
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Byron Ho has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Tsu-Jae King Liu
Department of Electrical Engineering and Computer Sciences, University of California, Berkeley, CA, USA
3 shared publicationsBich-Yen Nguyen
SOITEC, Grenoble, France
1 shared publicationBingxi Wood
Applied Materials, Inc., Santa Clara, USA
1 shared publicationCarlos Mazure
SOITEC, Grenoble, France
1 shared publicationChorng-Ping Chang
Applied Materials, Inc., Santa Clara, CA, USA
1 shared publicationDonovan Lee
Department of Electrical Engineering and Computer Sciences, University of California, Berkeley, CA, USA
1 shared publication
Latest Publications
- 11 December 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 60 (1) , 153-158
Fabrication of $\hbox{Si}_{1 - x}\hbox{Ge}_{x}/\hbox{Si}$ pMOSFETs Using Corrugated Substrates for Improved $I_{\rm ON}$ and Reduced Layout-Width DependenceSegmented-channel Si1-xGex/Si p-channel MOSFETs are fabricated using a conventional process, starting with corrugated Si1-xGex/Sisubstrates. As compared with the control devices fabricated using the same process but starting with a noncorrugated Si1-xGex/Si substrate, the segmented-channel MOSFETs show better layout efficiency (30% higher ION for IOFF = 10 nA per micrometer layout width) due to enhanced hole mobility and dramatically reduced dependence of performance on layout width due to the geometrical regularity of the channel region.
- 11 December 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 60 (1) , 153-158
Fabrication of $\hbox{Si}_{1 - x}\hbox{Ge}_{x}/\hbox{Si}$ pMOSFETs Using Corrugated Substrates for Improved $I_{\rm ON}$ and Reduced Layout-Width DependenceSegmented-channel Si1-xGex/Si p-channel MOSFETs are fabricated using a conventional process, starting with corrugated Si1-xGex/Sisubstrates. As compared with the control devices fabricated using the same process but starting with a noncorrugated Si1-xGex/Si substrate, the segmented-channel MOSFETs show better layout efficiency (30% higher ION for IOFF = 10 nA per micrometer layout width) due to enhanced hole mobility and dramatically reduced dependence of performance on layout width due to the geometrical regularity of the channel region.
- 19 April 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 59 (6) , 1629-1635
Planar GeOI TFET Performance Improvement With Back Biasing
Reverse back biasing of a planar germanium-on-insulator tunneling field-effect transistor provides for significant improvement in ION/IOFF, by over an order of magnitude for 0.25 V operating voltage. Optimization of the gate-to-source overlap and source doping gradient is key to maximizing the benefit of back biasing.
- 19 April 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 59 (6) , 1629-1635
Planar GeOI TFET Performance Improvement With Back Biasing
Reverse back biasing of a planar germanium-on-insulator tunneling field-effect transistor provides for significant improvement in ION/IOFF, by over an order of magnitude for 0.25 V operating voltage. Optimization of the gate-to-source overlap and source doping gradient is key to maximizing the benefit of back biasing.
- 13 September 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 19 (5) , 1260-1263
Electrical Characterization of Etch Rate for Micro- and Nano-Scale Gap Formation
The capability to accurately characterize lateral etch rate is needed for the manufacture of micro/nano-electro-mechanical devices which incorporate air-gaps. Optical microscopy can be used to monitor the etch-front and to detect whether a structure has been completely undercut (“released”), but not if the gap thickness is too small, e.g., less than 10 nm. In this paper, an electrical method of lateral-etch end-point detection is presented. By electrically testing cantilever beams of differing widths, the lateral etch rate can be determined. The accuracy of this method is verified via correlation with optical interferometry (R = 0.998) for gap thicknesses down to 70 nm. This new electrical characterization method is shown to be applicable to gap thicknesses as small as 4 nm.
- 13 September 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 19 (5) , 1260-1263
Electrical Characterization of Etch Rate for Micro- and Nano-Scale Gap Formation
The capability to accurately characterize lateral etch rate is needed for the manufacture of micro/nano-electro-mechanical devices which incorporate air-gaps. Optical microscopy can be used to monitor the etch-front and to detect whether a structure has been completely undercut (“released”), but not if the gap thickness is too small, e.g., less than 10 nm. In this paper, an electrical method of lateral-etch end-point detection is presented. By electrically testing cantilever beams of differing widths, the lateral etch rate can be determined. The accuracy of this method is verified via correlation with optical interferometry (R = 0.998) for gap thicknesses down to 70 nm. This new electrical characterization method is shown to be applicable to gap thicknesses as small as 4 nm.
- 1 January 2010
- Published by Springer Nature in MRS Proceedings
- Vol. 1252
Study of Germanium Epitaxial Recrystallization on Bulk-Si Substrates
LPCVD Ge films are deposited onto bulk Si substrates and subjected to either a rapid thermal anneal (RTA) or furnace anneal (FA) at a temperature that is higher than the melting point of Ge in an attempt to induce epitaxial recrystallization. Spiking into the Si and voids in the Ge film are observed after the anneal. This is attributed to defect-assisted Ge diffusion into the Si substrate caused by strain at the Ge-Si interface. Simple diffusion theory using published diffusivity values predicts diffusion depths similar to the spiking depths observed by scanning electron microscopy and transmission electron microscopy. Approaches to reduce the strain at the interface are explored. It is found that the quasi-equilibrium nature of FA reduces spiking and that there is an area dependence. Grazing-incidence x-ray diffraction analysis suggests that this technique for epitaxial recrystallization does not result in single-crystalline Ge.
- 1 January 2010
- Published by Springer Nature in MRS Proceedings
- Vol. 1252
Study of Germanium Epitaxial Recrystallization on Bulk-Si Substrates
LPCVD Ge films are deposited onto bulk Si substrates and subjected to either a rapid thermal anneal (RTA) or furnace anneal (FA) at a temperature that is higher than the melting point of Ge in an attempt to induce epitaxial recrystallization. Spiking into the Si and voids in the Ge film are observed after the anneal. This is attributed to defect-assisted Ge diffusion into the Si substrate caused by strain at the Ge-Si interface. Simple diffusion theory using published diffusivity values predicts diffusion depths similar to the spiking depths observed by scanning electron microscopy and transmission electron microscopy. Approaches to reduce the strain at the interface are explored. It is found that the quasi-equilibrium nature of FA reduces spiking and that there is an area dependence. Grazing-incidence x-ray diffraction analysis suggests that this technique for epitaxial recrystallization does not result in single-crystalline Ge.