Haeng Muk Cho
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Haeng Muk Cho has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Fangyuan Zheng
Department of Mechanical Engineering, Kongju National University, Cheonan 31080, Republic of Korea
8 shared publications - Ramozon Khujamberdiev
Department of Mechanical Engineering, Kongju National University, Cheonan 31080, Republic of Korea
8 shared publications - Iqbal Mahmud
Department of Mechanical Engineering, Mawlana Bhashani Science & Technology University, Tangail 1902, Bangladesh
4 shared publications - Adhirath Mandal
Department of Mechanical Engineering, Graphic Era Deemed to be University, Dehradun 248002, Uttarakhand, India
3 shared publications - Keunsang Lee
Department of Mechanical Engineering, Kongju National University, Cheonan 31080, Republic of Korea
3 shared publications - Arti Aniqa Tabassum
Department of Mechanical Engineering, Kongju National University, Cheonan 31080, Republic of Korea
2 shared publications
Latest Publications
- Open Access
Performance and Emission Optimization of Palm Biodiesel Fuels with Dual Nanoparticle Additives Using Gaussian Process Regression and Multi-Criteria Decision Analysis
This study employed a Gaussian Process Regression model combined with the Combinative Distance-Based Assessment method to analyze and optimize the performance and emission characteristics of a diesel engine operating with different fuel blends under various load conditions. The results indicated that increasing engine load generally improved brake thermal efficiency while reducing fuel consumption. Compared with conventional diesel fuel, palm biodiesel blends exhibited relatively higher fuel consumption and increased exhaust emissions under certain operating conditions. The incorporation of nanoparticle additives enhanced the combustion process, resulting in improved engine performance and reduced emissions. Among the tested fuels, the blend containing magnesium oxide nanoparticles exhibited the best overall performance across the investigated load range and showed greater potential for reducing incomplete-combustion emissions. The developed machine learning model accurately predicted engine performance and emission parameters and demonstrated strong generalization capability. Furthermore, the multi-criteria decision-making analysis enabled the identification of promising fuel–operating condition combinations based on multiple performance and emission indicators. Experimental validation demonstrated good agreement between the predicted and measured results, confirming the reliability of the proposed approach. The findings suggest that integrating machine learning techniques with multi-criteria decision-making methods provides an effective framework for fuel formulation optimization, engine performance enhancement, and emission reduction.
Open AccessPerformance and Emission Optimization of Palm Biodiesel Fuels with Dual Nanoparticle Additives Using Gaussian Process Regression and Multi-Criteria Decision Analysis
This study employed a Gaussian Process Regression model combined with the Combinative Distance-Based Assessment method to analyze and optimize the performance and emission characteristics of a diesel engine operating with different fuel blends under various load conditions. The results indicated that increasing engine load generally improved brake thermal efficiency while reducing fuel consumption. Compared with conventional diesel fuel, palm biodiesel blends exhibited relatively higher fuel consumption and increased exhaust emissions under certain operating conditions. The incorporation of nanoparticle additives enhanced the combustion process, resulting in improved engine performance and reduced emissions. Among the tested fuels, the blend containing magnesium oxide nanoparticles exhibited the best overall performance across the investigated load range and showed greater potential for reducing incomplete-combustion emissions. The developed machine learning model accurately predicted engine performance and emission parameters and demonstrated strong generalization capability. Furthermore, the multi-criteria decision-making analysis enabled the identification of promising fuel–operating condition combinations based on multiple performance and emission indicators. Experimental validation demonstrated good agreement between the predicted and measured results, confirming the reliability of the proposed approach. The findings suggest that integrating machine learning techniques with multi-criteria decision-making methods provides an effective framework for fuel formulation optimization, engine performance enhancement, and emission reduction.
- Open Access
The Effects of Biosyngas and Biogas on the Operation of Dual-Fuel Diesel Engines: A Review
To address the dual challenges of fossil fuel depletion and environmental pollution, developing clean, renewable alternative fuels is an urgent need. Biomass gas, including biomass syngas and biogas, offers significant potential as an internal combustion engine alternative fuel due to its widespread availability and carbon-neutral properties. This review summarizes research on biomass gas application in dual-fuel diesel engines. Firstly, biosyngas and biogas production methods, characteristics, and purification needs are detailed, highlighting gas composition variability as a key factor impacting engine performance. Secondly, dual-fuel diesel engine operating modes and their integration with advanced low-temperature combustion technologies are analyzed. The review focuses on how biomass gas affects combustion characteristics, engine performance, and emissions. Results indicate dual-fuel mode effectively reduces diesel consumption, emissions, while its carbon-neutrality lowers life-cycle CO2 emissions and generally suppresses NOx formation. However, challenges include potential BTE reduction and increased CO and HC emissions at low loads. Future research should prioritize gas quality standardization, intelligent combustion system optimization, and full-chain techno-economic evaluation to advance this technology. Overall, this review concludes that dual-fuel operation with biomass gases can achieve high diesel substitution rates, significantly reducing NOx and particulate matter emissions. However, challenges such as decreased brake thermal efficiency and increased CO and HC emissions under low-load conditions remain. Future efforts should focus on gas composition standardization, intelligent combustion control, and system-level optimization.
Open AccessThe Effects of Biosyngas and Biogas on the Operation of Dual-Fuel Diesel Engines: A Review
To address the dual challenges of fossil fuel depletion and environmental pollution, developing clean, renewable alternative fuels is an urgent need. Biomass gas, including biomass syngas and biogas, offers significant potential as an internal combustion engine alternative fuel due to its widespread availability and carbon-neutral properties. This review summarizes research on biomass gas application in dual-fuel diesel engines. Firstly, biosyngas and biogas production methods, characteristics, and purification needs are detailed, highlighting gas composition variability as a key factor impacting engine performance. Secondly, dual-fuel diesel engine operating modes and their integration with advanced low-temperature combustion technologies are analyzed. The review focuses on how biomass gas affects combustion characteristics, engine performance, and emissions. Results indicate dual-fuel mode effectively reduces diesel consumption, emissions, while its carbon-neutrality lowers life-cycle CO2 emissions and generally suppresses NOx formation. However, challenges include potential BTE reduction and increased CO and HC emissions at low loads. Future research should prioritize gas quality standardization, intelligent combustion system optimization, and full-chain techno-economic evaluation to advance this technology. Overall, this review concludes that dual-fuel operation with biomass gases can achieve high diesel substitution rates, significantly reducing NOx and particulate matter emissions. However, challenges such as decreased brake thermal efficiency and increased CO and HC emissions under low-load conditions remain. Future efforts should focus on gas composition standardization, intelligent combustion control, and system-level optimization.
- Open Access
A Study on the Performance and Emission Characteristics of Cotton and Waste Lard Biodiesel on a CI Engine
In this study, cottonseed oil biodiesel and waste lard biodiesel were produced through a transesterification process and blended with conventional diesel at different ratios (B10 and B20). The performance and emission characteristics of these fuels were systematically evaluated in a single-cylinder, four-stroke, water-cooled diesel engine operating at speeds of 1000–1800 rpm under a constant 50% load. The physicochemical properties of the fuels were analyzed, and engine parameters including brake-specific fuel consumption (BSFC), brake thermal efficiency (BTE), exhaust gas temperature (EGT), and emissions of carbon monoxide (CO), hydrocarbon (HC), carbon dioxide (CO2), and nitrogen oxides (NOx) were measured. The results demonstrated that, compared with diesel, biodiesel blends significantly reduced CO, HC, and CO2 emissions. At 1800 rpm, the LB20 blend showed reductions of 31.03% in CO, 47.06% in HCs, and 19.14% in CO2 relative to diesel. These reductions are mainly attributed to the higher oxygen content and lower hydrogen-to-carbon ratio of biodiesel, which promote more complete combustion. However, all biodiesel blends exhibited higher NOx emissions than diesel, with the increase being more pronounced at higher blend ratios. At 1800 rpm, the LB20 blend recorded the highest NOx emissions, which were 20.63% higher than those of diesel under the same condition. In terms of performance, biodiesel blends showed higher BSFC and lower BTE compared with diesel, mainly due to their lower calorific value and higher viscosity. The lowest BTE and the highest BSFC were both observed with the LB20 blend, at 22.64% and 358.11 g/kWh, respectively.
Open AccessA Study on the Performance and Emission Characteristics of Cotton and Waste Lard Biodiesel on a CI Engine
In this study, cottonseed oil biodiesel and waste lard biodiesel were produced through a transesterification process and blended with conventional diesel at different ratios (B10 and B20). The performance and emission characteristics of these fuels were systematically evaluated in a single-cylinder, four-stroke, water-cooled diesel engine operating at speeds of 1000–1800 rpm under a constant 50% load. The physicochemical properties of the fuels were analyzed, and engine parameters including brake-specific fuel consumption (BSFC), brake thermal efficiency (BTE), exhaust gas temperature (EGT), and emissions of carbon monoxide (CO), hydrocarbon (HC), carbon dioxide (CO2), and nitrogen oxides (NOx) were measured. The results demonstrated that, compared with diesel, biodiesel blends significantly reduced CO, HC, and CO2 emissions. At 1800 rpm, the LB20 blend showed reductions of 31.03% in CO, 47.06% in HCs, and 19.14% in CO2 relative to diesel. These reductions are mainly attributed to the higher oxygen content and lower hydrogen-to-carbon ratio of biodiesel, which promote more complete combustion. However, all biodiesel blends exhibited higher NOx emissions than diesel, with the increase being more pronounced at higher blend ratios. At 1800 rpm, the LB20 blend recorded the highest NOx emissions, which were 20.63% higher than those of diesel under the same condition. In terms of performance, biodiesel blends showed higher BSFC and lower BTE compared with diesel, mainly due to their lower calorific value and higher viscosity. The lowest BTE and the highest BSFC were both observed with the LB20 blend, at 22.64% and 358.11 g/kWh, respectively.
- Open Access
- 24 September 2025
- Published by Polish Scientific Society of Combustion Engines in Combustion Engines
- Vol. 204  (1) , 81-87
The influence of biogas injector location on air-biogas mixture homogeneity in a dual-fuel compression-ignition engine
This paper deals with the dual-fuel supply of a compression-ignition engine fuelled with diesel oil and biogas. The aim was to investigate the influence of the location of biogas injectors in the engine intake manifold on the selected characteristics of the air-biogas mixture introduced into the cylinders. A 3D scanning of geometrically complex elements was used as part of the development of a detailed 3D model of the engine intake system. A simulation of the fluid flow was performed for several variants of biogas injector location. The boundary conditions for the simulation were determined experimentally in the engine dynamometer test cell. The obtained results were analysed in terms of the homogeneity of the air-biogas mixture formed in the intake manifold. Finally, the optimal location of the injector was identified. The conclusions from the study provide guidance for the implementation of biogas injection solutions in compression-ignition engines operating in dual-fuel mode.
- 24 September 2025
- Published by Polish Scientific Society of Combustion Engines in Combustion Engines
- Vol. 204  (1) , 81-87
Open AccessThe influence of biogas injector location on air-biogas mixture homogeneity in a dual-fuel compression-ignition engine
This paper deals with the dual-fuel supply of a compression-ignition engine fuelled with diesel oil and biogas. The aim was to investigate the influence of the location of biogas injectors in the engine intake manifold on the selected characteristics of the air-biogas mixture introduced into the cylinders. A 3D scanning of geometrically complex elements was used as part of the development of a detailed 3D model of the engine intake system. A simulation of the fluid flow was performed for several variants of biogas injector location. The boundary conditions for the simulation were determined experimentally in the engine dynamometer test cell. The obtained results were analysed in terms of the homogeneity of the air-biogas mixture formed in the intake manifold. Finally, the optimal location of the injector was identified. The conclusions from the study provide guidance for the implementation of biogas injection solutions in compression-ignition engines operating in dual-fuel mode.
- Open Access
Hybrid Fuels for CI Engines with Biofuel Hydrogen Ammonia and Synthetic Fuel Blends
The transition to sustainable energy systems necessitates the development of cleaner fuel alternatives for compression ignition (CI) engines, which continue to play a vital role in transportation and power generation. This study explores the potential of hybrid fuel blends comprising biofuels, hydrogen, ammonia, and synthetic fuels to enhance engine performance while minimizing environmental impact. By reviewing recent advancements, the paper analyzes the combustion characteristics, emissions behavior, and feasibility of various fuel combinations. Biofuel–hydrogen blends improve flame speed and reduce carbon emissions, while ammonia offers zero-carbon combustion when paired with more reactive fuels, like biodiesel or hydrogen. Synthetic fuels, particularly those derived from renewable sources, provide high-quality combustion with low particulate emissions. Hybridization strategies leverage the strengths of each component fuel, resulting in synergistic effects that enhance thermal efficiency, reduce greenhouse gas emissions, and support the continued use of CI engines in a carbon-constrained future. The findings indicate that with proper optimization of fuel formulations and engine technologies, hybrid fuels can play a key role in achieving sustainability goals and reducing fossil fuel dependency.
Open AccessHybrid Fuels for CI Engines with Biofuel Hydrogen Ammonia and Synthetic Fuel Blends
The transition to sustainable energy systems necessitates the development of cleaner fuel alternatives for compression ignition (CI) engines, which continue to play a vital role in transportation and power generation. This study explores the potential of hybrid fuel blends comprising biofuels, hydrogen, ammonia, and synthetic fuels to enhance engine performance while minimizing environmental impact. By reviewing recent advancements, the paper analyzes the combustion characteristics, emissions behavior, and feasibility of various fuel combinations. Biofuel–hydrogen blends improve flame speed and reduce carbon emissions, while ammonia offers zero-carbon combustion when paired with more reactive fuels, like biodiesel or hydrogen. Synthetic fuels, particularly those derived from renewable sources, provide high-quality combustion with low particulate emissions. Hybridization strategies leverage the strengths of each component fuel, resulting in synergistic effects that enhance thermal efficiency, reduce greenhouse gas emissions, and support the continued use of CI engines in a carbon-constrained future. The findings indicate that with proper optimization of fuel formulations and engine technologies, hybrid fuels can play a key role in achieving sustainability goals and reducing fossil fuel dependency.
- Top Cited PapersOpen Access
Study on Biodiesel Production: Feedstock Evolution, Catalyst Selection, and Influencing Factors Analysis
As fossil fuel depletion and environmental pollution become increasingly severe, biodiesel has emerged as a promising renewable alternative to conventional diesel due to its biodegradability, low sulfur emissions, and high combustion efficiency. This paper provides a comprehensive review of the evolution of biodiesel feedstocks, major production technologies, and key factors influencing production efficiency and fuel quality. It traces the development of feedstocks from first-generation edible oils, second-generation non-edible oils and waste fats, to third-generation microalgal oils and fourth-generation biofuels based on synthetic biology, with a comparative analysis of their respective advantages and limitations. Various production technologies such as transesterification, direct esterification, supercritical alcohol methods, and enzyme-catalyzed transesterification are examined in terms of reaction mechanisms, process conditions, and applicability. The effects of critical process parameters including the alcohol-to-oil molar ratio, reaction time, and temperature on biodiesel yield and quality are discussed in detail. Particular attention is given to the role of catalysts, including both homogeneous and heterogeneous types, in enhancing conversion efficiency. In addition, life cycle assessment (LCA) is briefly considered to evaluate the environmental impact and sustainability of biodiesel production. This review serves as a valuable reference for improving biodiesel production technologies, advancing sustainable feedstock development, and promoting the commercial application of biodiesel.
Top Cited PapersOpen AccessStudy on Biodiesel Production: Feedstock Evolution, Catalyst Selection, and Influencing Factors Analysis
As fossil fuel depletion and environmental pollution become increasingly severe, biodiesel has emerged as a promising renewable alternative to conventional diesel due to its biodegradability, low sulfur emissions, and high combustion efficiency. This paper provides a comprehensive review of the evolution of biodiesel feedstocks, major production technologies, and key factors influencing production efficiency and fuel quality. It traces the development of feedstocks from first-generation edible oils, second-generation non-edible oils and waste fats, to third-generation microalgal oils and fourth-generation biofuels based on synthetic biology, with a comparative analysis of their respective advantages and limitations. Various production technologies such as transesterification, direct esterification, supercritical alcohol methods, and enzyme-catalyzed transesterification are examined in terms of reaction mechanisms, process conditions, and applicability. The effects of critical process parameters including the alcohol-to-oil molar ratio, reaction time, and temperature on biodiesel yield and quality are discussed in detail. Particular attention is given to the role of catalysts, including both homogeneous and heterogeneous types, in enhancing conversion efficiency. In addition, life cycle assessment (LCA) is briefly considered to evaluate the environmental impact and sustainability of biodiesel production. This review serves as a valuable reference for improving biodiesel production technologies, advancing sustainable feedstock development, and promoting the commercial application of biodiesel.
- Open Access
Synthesis and Characterization of Nanoparticles in Transforming Biodiesel into a Sustainable Fuel
Biodiesel is a promising alternative to fossil fuels, offering environmental benefits but facing challenges such as low energy density, poor oxidative stability, and high emissions. Nanotechnology has emerged as a solution, with nanoparticles improving biodiesel properties. This review examines the synthesis, characterization, and application of metal-based, carbon-based, and hybrid nanomaterials in biodiesel. Notable enhancements include an 18% increase in brake thermal efficiency with aluminum oxide and a 20% reduction in NOx emissions with cerium oxide. Hybrid nanoparticles, like graphene oxide with carbon nanotubes, have achieved a 25% decrease in hydrocarbon emissions. Despite these advancements, concerns regarding nanoparticle toxicity, environmental impact, and stability remain. Future research should focus on eco-friendly synthesis, integration with second-generation biodiesel, and multifunctional hybrid nanomaterials. This review highlights the potential of nanotechnology in enhancing biodiesel performance, paving the way for cleaner and more efficient energy solutions.
Open AccessSynthesis and Characterization of Nanoparticles in Transforming Biodiesel into a Sustainable Fuel
Biodiesel is a promising alternative to fossil fuels, offering environmental benefits but facing challenges such as low energy density, poor oxidative stability, and high emissions. Nanotechnology has emerged as a solution, with nanoparticles improving biodiesel properties. This review examines the synthesis, characterization, and application of metal-based, carbon-based, and hybrid nanomaterials in biodiesel. Notable enhancements include an 18% increase in brake thermal efficiency with aluminum oxide and a 20% reduction in NOx emissions with cerium oxide. Hybrid nanoparticles, like graphene oxide with carbon nanotubes, have achieved a 25% decrease in hydrocarbon emissions. Despite these advancements, concerns regarding nanoparticle toxicity, environmental impact, and stability remain. Future research should focus on eco-friendly synthesis, integration with second-generation biodiesel, and multifunctional hybrid nanomaterials. This review highlights the potential of nanotechnology in enhancing biodiesel performance, paving the way for cleaner and more efficient energy solutions.
- Open Access
Numerical Analysis of Diesel Engine Combustion and Performance with Single-Component Surrogate Fuel
Compression ignition engines are widely recognized for their reliability and efficiency, remaining essential for transportation and power generation despite the transition toward sustainable energy solutions. This study employs ANSYS Forte to analyze the combustion and performance characteristics of a direct-injection, single-cylinder, four-stroke engine fueled with an n-heptane-based diesel surrogate. The investigation considers varying SOI timings (−32.5°, −27.5°, −22.5°, and −17.5° BTDC) and EGR rates (0%, 15%, 30%, 45%, and 60%). The simulation incorporates the RNG k-ε turbulence model, the power-law combustion model, and the KH-RT spray breakup model. The results indicate that the optimal peak pressure and temperature occur at an SOI of −22.5° BTDC with 0% EGR. Advancing SOI enhances oxidation, reducing NOx and CO emissions but increasing UHC due to delayed fuel–air mixing. Higher EGR rates lower in-cylinder pressure, temperature, HRR, and NOx emissions while elevating CO and UHC levels due to oxygen depletion and incomplete combustion. These findings highlight the trade-offs between combustion efficiency and emissions, emphasizing the need for optimized SOI and EGR strategies to achieve balanced engine performance.
Open AccessNumerical Analysis of Diesel Engine Combustion and Performance with Single-Component Surrogate Fuel
Compression ignition engines are widely recognized for their reliability and efficiency, remaining essential for transportation and power generation despite the transition toward sustainable energy solutions. This study employs ANSYS Forte to analyze the combustion and performance characteristics of a direct-injection, single-cylinder, four-stroke engine fueled with an n-heptane-based diesel surrogate. The investigation considers varying SOI timings (−32.5°, −27.5°, −22.5°, and −17.5° BTDC) and EGR rates (0%, 15%, 30%, 45%, and 60%). The simulation incorporates the RNG k-ε turbulence model, the power-law combustion model, and the KH-RT spray breakup model. The results indicate that the optimal peak pressure and temperature occur at an SOI of −22.5° BTDC with 0% EGR. Advancing SOI enhances oxidation, reducing NOx and CO emissions but increasing UHC due to delayed fuel–air mixing. Higher EGR rates lower in-cylinder pressure, temperature, HRR, and NOx emissions while elevating CO and UHC levels due to oxygen depletion and incomplete combustion. These findings highlight the trade-offs between combustion efficiency and emissions, emphasizing the need for optimized SOI and EGR strategies to achieve balanced engine performance.