Feng Gao
Feng Gao has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
Jiangying Qu
Faculty of Chemistry and Chemical Engineering, Liaoning Normal University, Dalian, China
6 shared publicationsGuanghua Shao
Faculty of Chemistry and Chemical Engineering, Liaoning Normal University, Dalian, China
3 shared publications- Jieshan Qiu
State Key Laboratory of Chemical Resource Engineering, College of Chemical Engineering, Beijing University of Chemical Technology, Beijing, China
3 shared publications Lin Shi
3 shared publicationsSiyuan Lv
3 shared publicationsZongbin Zhao
Carbon Research Laboratory
3 shared publications
Latest Publications
- Open Access
- 7 January 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (2) , 264
KxCo1.5−0.5xFe(CN)6/rGO with Dual−Active Sodium Ion Storage Site as Superior Anode for Sodium Ion Battery
The unique and open large frame structures of prussian blue analogues (PBA) enables it for accommodating a large number of cations (Na+, K+, Ca2+, etc.), thus, PBA are considered as promising electrode materials for the rechargeable battery. However, due to the chemical composition, there are still many alkaline metal ions in the gap within the framework, which puts multivalent metals in PBA in a low valence state and affects the sodium storage performance. To improve the valence of metal ions in PBA materials, precursors prepared by co−precipitation method and hydrothermal method are used to synthesis KxCo1.5−0.5xFe(CN)6 through further chemical oxidation. Through the introducing of reduced graphene oxide (rGO) with excellent conductivity by a simple physical mixing method, the cycle stability and rate performance of the PBA material can be further improved. The K0.5Co1.2Fe(CN)6·2H2O/rGO anode prepared with 2 h hydrothermal time and further chemical oxidation, named as KCoHCP−H2−EK/rGO, exhibits a super electrochemical performance, delivering initial charge/discharge capacities of 846.7/1445.0 mAh·g−1, and a capacity retention of 58.2% after 100 cycles at a current density of 100 mA·g−1. The KCoHCP−H2−EK/rGO outstanding electrochemical behaviors are attributed to the unique dual−active site structure properties and the improved surface conductance of materials by rGO components.
- 7 January 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (2) , 264
Open AccessKxCo1.5−0.5xFe(CN)6/rGO with Dual−Active Sodium Ion Storage Site as Superior Anode for Sodium Ion Battery
The unique and open large frame structures of prussian blue analogues (PBA) enables it for accommodating a large number of cations (Na+, K+, Ca2+, etc.), thus, PBA are considered as promising electrode materials for the rechargeable battery. However, due to the chemical composition, there are still many alkaline metal ions in the gap within the framework, which puts multivalent metals in PBA in a low valence state and affects the sodium storage performance. To improve the valence of metal ions in PBA materials, precursors prepared by co−precipitation method and hydrothermal method are used to synthesis KxCo1.5−0.5xFe(CN)6 through further chemical oxidation. Through the introducing of reduced graphene oxide (rGO) with excellent conductivity by a simple physical mixing method, the cycle stability and rate performance of the PBA material can be further improved. The K0.5Co1.2Fe(CN)6·2H2O/rGO anode prepared with 2 h hydrothermal time and further chemical oxidation, named as KCoHCP−H2−EK/rGO, exhibits a super electrochemical performance, delivering initial charge/discharge capacities of 846.7/1445.0 mAh·g−1, and a capacity retention of 58.2% after 100 cycles at a current density of 100 mA·g−1. The KCoHCP−H2−EK/rGO outstanding electrochemical behaviors are attributed to the unique dual−active site structure properties and the improved surface conductance of materials by rGO components.
- 15 February 2022
- Published by IOP Publishing in Nanotechnology
- Vol. 33 (19) , 195402
Resistance matching materials nanoarchitectonics for better performances in water evaporation-driven generators
The improvement of electricity production for water evaporation-driven generators (WEGs) remains a challenge. Herein, two types of WEGs were designed to study the resistance matching for improving the electricity production using the method of nanoarchitectonics. One type of reduced graphene oxide/carbon nanotube (RGO/CNT) WEG was constructed using RGO with adjustable resistances as working material and CNTs with fixed resistance as electrode material. The other type of graphene oxide (GO)/RGO WEG was constructed using RGO with adjustable resistance as electrode material and GO with fixed resistance was used as working material. The open circuit voltage of RGO/CNT increased from 15 to 56 mV and then decreased to 22 mV with increasing RGO resistance. The short circuit current of RGO/CNT also first increased and then decreased. The performance of GO/RGO was similar with that of RGO/CNT. Typically, the RGO/CNT and GO/RGO WEG showed the highest performance when the working material to electrode material resistance ratio was 2272 and 2365, respectively. It showed that the best resistance ratio of working material to electrode material was in the range of 2000–2500, which helped to improve about 2–5 times of electricity efficiency in the WEG. The present work provides a new direction for optimizing performance of WEGs.
- 15 February 2022
- Published by IOP Publishing in Nanotechnology
- Vol. 33 (19) , 195402
Resistance matching materials nanoarchitectonics for better performances in water evaporation-driven generators
The improvement of electricity production for water evaporation-driven generators (WEGs) remains a challenge. Herein, two types of WEGs were designed to study the resistance matching for improving the electricity production using the method of nanoarchitectonics. One type of reduced graphene oxide/carbon nanotube (RGO/CNT) WEG was constructed using RGO with adjustable resistances as working material and CNTs with fixed resistance as electrode material. The other type of graphene oxide (GO)/RGO WEG was constructed using RGO with adjustable resistance as electrode material and GO with fixed resistance was used as working material. The open circuit voltage of RGO/CNT increased from 15 to 56 mV and then decreased to 22 mV with increasing RGO resistance. The short circuit current of RGO/CNT also first increased and then decreased. The performance of GO/RGO was similar with that of RGO/CNT. Typically, the RGO/CNT and GO/RGO WEG showed the highest performance when the working material to electrode material resistance ratio was 2272 and 2365, respectively. It showed that the best resistance ratio of working material to electrode material was in the range of 2000–2500, which helped to improve about 2–5 times of electricity efficiency in the WEG. The present work provides a new direction for optimizing performance of WEGs.
- 19 September 2016
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 4 (41) , 16219-16224
Efficient synthesis of graphene/sulfur nanocomposites with high sulfur content and their application as cathodes for Li–S batteries
(1) A dual-oxidation strategy of H 2 S by H 2 O 2 and GO is designed to synthesize a graphene/sulfur composite with a high sulfur content. (2) The sulfur content of GS/S nanocomposites can be tailored in the range of 40–80 wt%. (3) The GS/S-70 possesses a high reversible capacity of 651 mA h g −1 and 85% of capacity retention after 100 cycles.
- 19 September 2016
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 4 (41) , 16219-16224
Efficient synthesis of graphene/sulfur nanocomposites with high sulfur content and their application as cathodes for Li–S batteries
(1) A dual-oxidation strategy of H 2 S by H 2 O 2 and GO is designed to synthesize a graphene/sulfur composite with a high sulfur content. (2) The sulfur content of GS/S nanocomposites can be tailored in the range of 40–80 wt%. (3) The GS/S-70 possesses a high reversible capacity of 651 mA h g −1 and 85% of capacity retention after 100 cycles.
- 7 April 2016
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 4 (19) , 7445-7452
Self-templating synthesis of nitrogen-decorated hierarchical porous carbon from shrimp shell for supercapacitors
Nitrogen-doped hierarchical porous carbon for a supercapacitor electrode was prepared from shrimp shell using its intrinsic mineral scaffold (CaCO3) as the self-template combined with KOH activation.
- 7 April 2016
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 4 (19) , 7445-7452
Self-templating synthesis of nitrogen-decorated hierarchical porous carbon from shrimp shell for supercapacitors
Nitrogen-doped hierarchical porous carbon for a supercapacitor electrode was prepared from shrimp shell using its intrinsic mineral scaffold (CaCO3) as the self-template combined with KOH activation.
- 1 February 2016
- Published by Elsevier in Electrochimica Acta
- Vol. 190, 1134-1141
Nitrogen-doped activated carbon derived from prawn shells for high-performance supercapacitors
- 1 February 2016
- Published by Elsevier in Electrochimica Acta
- Vol. 190, 1134-1141
Nitrogen-doped activated carbon derived from prawn shells for high-performance supercapacitors
- 1 February 2015
- Published by Elsevier in Electrochimica Acta
- Vol. 155, 201-208
Tailoring of porous and nitrogen-rich carbons derived from hydrochar for high-performance supercapacitor electrodes
- 1 February 2015
- Published by Elsevier in Electrochimica Acta
- Vol. 155, 201-208
Tailoring of porous and nitrogen-rich carbons derived from hydrochar for high-performance supercapacitor electrodes
- 1 January 2015
- Published by Elsevier in Applied Catalysis B: Environment and Energy
- Vol. 162, 268-274
In situ fabrication of Mn3O4 decorated graphene oxide as a synergistic catalyst for degradation of methylene blue
- 1 January 2015
- Published by Elsevier in Applied Catalysis B: Environment and Energy
- Vol. 162, 268-274
In situ fabrication of Mn3O4 decorated graphene oxide as a synergistic catalyst for degradation of methylene blue