Arsen Pavic
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Arsen Pavic has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Ante Bandalović
Clinical Department of Traumatology, University Hospital Split, Split, Croatia
2 shared publications - Fabijan Cukelj
Clinical Department of Traumatology, University Hospital Split, Split, Croatia
2 shared publications Josip Knežević
2 shared publicationsMarko Ostojić
2 shared publicationsBore Bakota
1 shared publicationFabijan Cukelj
1 shared publication
Latest Publications
- 1 December 2014
- p. 370-5
Computer representation of osteosynthesis stability in locking plates used for the treatment of osteoporotic proximal humerus fractures.
Proximal humerus fractures are represented as 4-5% of all fractures, with incidence notably growing with age. Since surgical internal fixation in treatment of proximal humeral fractures is used, fractures of osteoporotic bone and choice of plate for their osteosynthesis represent particular problem. The aim of the study was to test two locking plates: Philos plate with locking screws with determinated direction, and Arthrex plate with poliaxial locking screws, using the finite element method. This study used version 6.10 of Abaqus FEA software package for simulation and fine element analysis of Philos and Artrex plates attached to the osteotomy models of proximal humerus with fracture gap at 0°, 10° and 20° in four types of static load: abduction, adduction, axial compression and flexion. Simulation results of loads in abduction, adduction, axial loads and flexion, were described with the total bone displacement (U) and maximum bone displacement in the fracture gap (Uf). When examining the Philos plate in axial load on the bone with fracture gap angle from 0°, 10° and 20° no significant differences between the results for the displacements were observed. Therefore, results for other loads are related to total displacements of the bone only at the angle of 0°. Given that the results of the total bone displacement and maximum bone displacement in the fracture gap with Artrex plate were mostly higher, for comparison with the results of bone displacement in Philos plate it was taken that total bone displacement and maximum displacement in the fracture gap in Artrex plate represent 100% of the total displacement. Philos plate showed 60.71% for abduction, 76.07% for adduction, 102.24% for axial loads and 79.59% for flexion of total bone displacement in Artrex plate, and 60.48% for abduction, 76.07% for adduction, 96.05% for axial load and 79.96% for flexion of maximum displacement in the fracture gap in Artrex plate. Osteosynthesis for osteoporotic fractures of proximal humerus with Philos plate in computer simulation proved to be more stable than with Arthrex plate.
- 1 December 2014
- p. 370-5
Computer representation of osteosynthesis stability in locking plates used for the treatment of osteoporotic proximal humerus fractures.
Proximal humerus fractures are represented as 4-5% of all fractures, with incidence notably growing with age. Since surgical internal fixation in treatment of proximal humeral fractures is used, fractures of osteoporotic bone and choice of plate for their osteosynthesis represent particular problem. The aim of the study was to test two locking plates: Philos plate with locking screws with determinated direction, and Arthrex plate with poliaxial locking screws, using the finite element method. This study used version 6.10 of Abaqus FEA software package for simulation and fine element analysis of Philos and Artrex plates attached to the osteotomy models of proximal humerus with fracture gap at 0°, 10° and 20° in four types of static load: abduction, adduction, axial compression and flexion. Simulation results of loads in abduction, adduction, axial loads and flexion, were described with the total bone displacement (U) and maximum bone displacement in the fracture gap (Uf). When examining the Philos plate in axial load on the bone with fracture gap angle from 0°, 10° and 20° no significant differences between the results for the displacements were observed. Therefore, results for other loads are related to total displacements of the bone only at the angle of 0°. Given that the results of the total bone displacement and maximum bone displacement in the fracture gap with Artrex plate were mostly higher, for comparison with the results of bone displacement in Philos plate it was taken that total bone displacement and maximum displacement in the fracture gap in Artrex plate represent 100% of the total displacement. Philos plate showed 60.71% for abduction, 76.07% for adduction, 102.24% for axial loads and 79.59% for flexion of total bone displacement in Artrex plate, and 60.48% for abduction, 76.07% for adduction, 96.05% for axial load and 79.96% for flexion of maximum displacement in the fracture gap in Artrex plate. Osteosynthesis for osteoporotic fractures of proximal humerus with Philos plate in computer simulation proved to be more stable than with Arthrex plate.
- 1 December 2014
- p. 376-81
The Results of Internal Fixation of Proximal Humeral Osteoporotic Fractures with PHILOS Locking Plate.
In the last fifty years since plate and screw osteosynthesis has been implemented in fracture treatment, osteosporotic bone fractures were observed as a special problem. Due to special histologic, anatomic, physical and biomehanic properties of osteoporotic changed bone the laws of biomechanics suggest that stable osteosynthesis for osteoporotic bone is necessary to increase the contact surface of metallic implants and bone and the stability of the screw-plate-bone compound. There are numerous surgical techniques and methods for treatment of osteoporotic proximal humeral fractures. Every surgical procedure has to establish anatomical reduction and stable fixation that will enable early mobilisation. The aim of this study was to present results of internal fixation of proximal humeral osteoporotic fractures with PHILOS locking plate. Between 2007 and 2012, a total of 67 patients older than 65 years with closed proximal humerus fractures underwent surgical treatment with PHILOS plate system (Synthes, Switzerland). 42 patients were operated with deltopectoral approach and 25 with deltoid split approach. After a mean follow up period of 14.68 (6-28) months functional and radiologic results were assessed. We noted 9 postoperative complications related to surgical technique (1 intraarticular screw placement, 1 displacement in major tuberculum fragment, 1 displacement in major tuberculum fragment along with oblique placement of the plate, 2 cases of inadequate reduction, 1 case of humeral head avascular necrosis, varus humeral head fixation in 3 cases). None of the patients developed superficial or deep surgical infection. There was no nonunions. In the final evaluation, the Constant shoulder score was 91.75 (72-100). In this study PHILOS locking plate showed good applicability, respecting bone biologic properties because of negligible interference with blood supply of the humeral head. There was no requirement to shape the plate enabling stabilization at constant angles as clear benefit of this plate. All that enables early mobilisation, and no implant insufficiency resulting in satisfactory treatment results and high Constant shoulder scores.
- 1 December 2014
- p. 376-81
The Results of Internal Fixation of Proximal Humeral Osteoporotic Fractures with PHILOS Locking Plate.
In the last fifty years since plate and screw osteosynthesis has been implemented in fracture treatment, osteosporotic bone fractures were observed as a special problem. Due to special histologic, anatomic, physical and biomehanic properties of osteoporotic changed bone the laws of biomechanics suggest that stable osteosynthesis for osteoporotic bone is necessary to increase the contact surface of metallic implants and bone and the stability of the screw-plate-bone compound. There are numerous surgical techniques and methods for treatment of osteoporotic proximal humeral fractures. Every surgical procedure has to establish anatomical reduction and stable fixation that will enable early mobilisation. The aim of this study was to present results of internal fixation of proximal humeral osteoporotic fractures with PHILOS locking plate. Between 2007 and 2012, a total of 67 patients older than 65 years with closed proximal humerus fractures underwent surgical treatment with PHILOS plate system (Synthes, Switzerland). 42 patients were operated with deltopectoral approach and 25 with deltoid split approach. After a mean follow up period of 14.68 (6-28) months functional and radiologic results were assessed. We noted 9 postoperative complications related to surgical technique (1 intraarticular screw placement, 1 displacement in major tuberculum fragment, 1 displacement in major tuberculum fragment along with oblique placement of the plate, 2 cases of inadequate reduction, 1 case of humeral head avascular necrosis, varus humeral head fixation in 3 cases). None of the patients developed superficial or deep surgical infection. There was no nonunions. In the final evaluation, the Constant shoulder score was 91.75 (72-100). In this study PHILOS locking plate showed good applicability, respecting bone biologic properties because of negligible interference with blood supply of the humeral head. There was no requirement to shape the plate enabling stabilization at constant angles as clear benefit of this plate. All that enables early mobilisation, and no implant insufficiency resulting in satisfactory treatment results and high Constant shoulder scores.