FSFabio Akiyoshi Suinaga

Fabio Akiyoshi Suinaga

*This is an algorithmically generated author record based on publicly available information.

Fabio Akiyoshi Suinaga has a total of 52 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Low-cost lettuce phenotyping platforms powered by generative AI: development, validation, and methodological democratization for climate-just Brazilian Lettuce Crops

    by Mariana Rodrigues Fontenelle, Ítalo Moraes Rocha Guedes, Fábio Akiyoshi Suinaga, Juscimar da Silva, Marcos Brandão Braga, Samuel Cordeiro Vítor Martins, Carlos Eduardo Pacheco Lima

    In this context, low-cost digital technologies capable of democratizing access to technical and scientific tools are essential to enhance the resilience and adaptive capacity of vegetable production systems. This study aimed to develop and validate low-cost lettuce phenotyping platforms powered by generative artificial intelligence (AI), focusing on thermal physiological disorders, using Prompt Engineering and Prompt Chaining as core methodologies. The framework comprised: (i) compilation and mapping of climate information and thermal risk/severity for lettuce in Brazil; (ii) identification of key physiological disorders expected under GCC scenarios based on Lima et al. (2024) and a systematic literature review; (iii) design of an analytical pipeline using Prompt Engineering and Prompt Chaining for generative Ais; and (iv) extraction of Python scripts and generation of SHA-256 hash codes in Visual Studio Code (VSC), followed by validation through comparison between AI-generated reports and the reference results of Lima et al. (2024). The resulting set of scripts reproduced, with high consistency, the patterns reported in the benchmark study and were made publicly available under FAIR principles. These results represent an important tool to accelerate the development of technological solutions for increasing resilience and climate adaptation in Brazilian lettuce production, while remaining replicable and adaptable via open-source code to other regions of the world.

  • Open Access

    Yield Adaptability and Stability in Chickpea Based on AMMI, Eberhart and Russell’s, Lin and Binns’s, and WAASB Models

    by Osmar Artiaga, Carlos Roberto Spehar, Nathalia Ramos Queiroz, Giovani Olegário Silva, Fabio Akiyoshi Suinaga, Warley Marcos Nascimento

    Chickpeas are a pulse crop that originated in Eurasia and are a source of protein for many people. The objective of this research is to select stable, high-yielding chickpea genotypes using uni- and multivariate methods of adaptability and stability analysis. Fifteen genotypes were tested in the 2020 and 2021 agricultural years. The experimental design was a completely randomized block design with three replications. The collected data were yield (kg/ha) values, and the stability analyses were performed using Eberhart and Russell’s, Lin and Binns’s modified by Carneiro’s, additive main effects and multiplicative interaction (AMMI), and weighted average of absolute scores (WAASB) methods. The average sum of ranks (ASR) was then calculated by ranking genotypes according to their yield and stability indices. The AMMI analysis of variance showed significant effects (p < 0.05) for environments, genotypes, and the interaction between genotypes and environments. From AMMI, the first three principal components (PCs) had significant effects, and the cumulative variance on the PC1 and PC2 axes was 86%. FLIP02-23C, FLIP03-109C, and Jamu 96 had the lowest ASR, indicating that these genotypes are the most stable and productive chickpea genotypes. According to AMMI2, genotypes FLIP03-109C, FLIP03-35C, FLIP02-23C, and FLIP06-155C could be adapted to irrigated environments.


  • Open Access

    Thermal severity on brazilian lettuce crops under two global climate change scenarios

    by Carlos Eduardo Pacheco Lima, Mariana Rodrigues Fontenelle, Marcos Brandão Braga, Fábio Akiyoshi Suinaga, Ítalo Moraes Rocha Guedes, Juscimar da Silva

    Lettuce (Lactuca sativa L.) is one of the most produced and consumed vegetables in Brazil. As a crop of Mediterranean origin and therefore adapted to cool and/or mild climates, it is strongly affected by high temperatures. Morphophysiological disorders such as premature bolting and tipburn are examples of these impacts. Such problems are expected to worsen under projected scenarios of global warming and climate change. Therefore, this study aimed to assess the vulnerability of Brazilian lettuce production to two global climate change scenarios (RCP 4.5 and RCP 8.5) throughout the 21st century, using the regional climate model ETA-HadGEM2-ES, as well as the impacts of what we defined here as the Thermal Severity Index, calculated by summing the vulnerability indices of mean temperature and maximum temperature. Projections of mean temperature (Tmean) and maximum temperature (Tmax) were analyzed for the four seasons of the year, generating thematic maps of climate vulnerability and the Thermal Severity Index (IS), which integrates both variables. The results indicate a generalized warming trend, more pronounced under the RCP 8.5 scenario, with significant impacts on lettuce production, especially in the Central-West, Northeast, and Northern regions. Impacts will be greatest during summer and spring. By the end of the century, in both scenarios, almost the entire country, across all seasons, will present high to very high IS values. Only the Southern region and parts of mountainous areas showed high suitability for lettuce cultivation. The urgent adoption of climate change adaptation strategies and improvements in production system resilience is therefore necessary. As lettuce cultivation is highly associated with family farming—largely neglected in current climate change actions, this also becomes a matter of climate justice.


  • Sweet corn genotypes and ear insect infestations cultivated under different weed management regimes

    by Marcos V. Zanon, Ana C. A. Araújo, Ana P. Perotto, Patrícia J. Santos, Fábio A. Suinaga, Jorge B. Torres, Cristina S. Bastos


  • Open Access

    Stability Evaluation for Heat Tolerance in Lettuce: Implications and Recommendations

    by Maryanne C. Pereira, Nara O. S. Souza, Warley M. Nascimento, Giovani O. da Silva, Caroline R. da Silva, Fabio A. Suinaga

    Lettuce is an important cool-temperature crop, and its principal abiotic stress is low heat tolerance. Lettuce production has become more challenging in the context of global warming changes. Hence, the main objective of this research was to investigate the relationship between stability and lettuce heat tolerance. Field and greenhouse trials were run in 2015 (summer) and 2016 (fall and spring). The environments were composed of a combination of season and place (field, glass, and plastic greenhouse), and the assessed genotypes were BRS Leila and Mediterrânea, Elisa, Everglades, Simpson, and Vanda. Statistical analysis showed a significant effect (p < 0.05) of environments (E), genotypes (G), and the GEI. BRS Leila, Elisa, and BRS Mediterrânea showed the greatest means to the first anthesis in suitable environments (milder temperatures). Among these cultivars, BRS Mediterrânea was the most stable and adapted to hot environments. The environmental conditions studied in this research, mainly high temperatures, could become a reality in many lettuce-producing areas. Therefore, the results can help indicate and develop lettuce varieties with greater heat tolerance.


  • Open Access

    Associational Resistance Using Wild and Commercial Tomato Genotypes Employed in the Management of Tomato Virus Vectors

    by Donald Manigat, Karolayne L. Campos, Joyce S. dos Santos, Catiane O. Souza, Jorge B. Torres, Fábio A. Suinaga, Cristina S. Bastos

    Some of the key pests of tomatoes are virus vectors, such as whiteflies, green peach aphids, and thrips, mainly because there is a lack of full resistance to the transmitted viruses. Alternatives to reduce this problem include the use of a push-and-pull strategy. Hence, this work assessed the association between Solanum habrochaites PI 1344117, used as a companion plant, and commercial tomato varieties over tomato virus vectors and the yield quality and quantity. Field and greenhouse trials were run during the 2015, 2016, 2018, and 2019 seasons. The treatments were BRS Tospodoro and BRS Tyão cultivated as monocrops and associated with PI-134417. The number of these insects was assessed by directly counting ten plants per plot and using captures on yellow sticky traps settled in the center of the plots. The yield and the number of irregularly ripening fruits (a symptom caused by whiteflies) were also measured. Both commercial cultivars gained from the protective effect of PI 134417, expressed by the significant reduction in the virus vectors on the plants. It was also noticed that there was a reduction in the number of irregularly ripening fruits, improving the fruit quality. These results encourage the use of wild and commercial tomato genotypes in association with implementing strategies to control tomato virus vectors, reducing the need to rely only on a chemical control.

  • Open Access

    Planting Date of Cotton in the Brazilian Cerrado Drives Boll Weevil (Coleoptera: Curculionidae) Infestation

    by Patrícia J. Santos, Antônio M. Dias, Karolayne L. Campos, Ana C. A. Araújo, Andréa A. S. Oliveira, Fábio A. Suinaga, Jorge B. Torres, Cristina S. Bastos

    Although the boll weevil (BW), Anthonomus grandis grandis (Coleoptera: Curculionidae) has been attributed to the significant losses caused to cotton yield in the Americas, the categorization as a quarentenary pest in places where it is still not occurring has increased its relevance worldwide. In areas where it is widespread, pest suppression relies on many broad-spectrum insecticide applications. However, other control tactics are sought. Considering that early-flowering cultivars escape from boll weevil infestation, we investigated if three different planting dates (November, December, and January) could alter the plant life cycle, allowing the plants to escape from boll weevil infestation. Field trials were run in two seasons (2014/2015 and 2017/2018), and variables (days required to reach each flowering stage, fruiting plant structures—undamaged and damaged by the BW, and totals—number of boll weevils on plants and that had emerged from fallen structures on the ground) were assessed over 29 and 33 weeks, respectively. Based on the number of days required to initiate and terminate the flowering stage, the time to reach the economic threshold (ET), the number of undamaged, damaged, and the total reproductive structures, we concluded that planting dates in December for the Central Cerrado of Brazil should be preferred over the other two tested dates. Cultivations run at this planting date, anticipating the flowering period initiation and termination, reduced infested flowering structures, and delayed the decision making to control the pest, when compared to the other two planting dates.


  • Open Access

    Chemical desiccants for anticipation of harvest and quality improvement of chickpea seeds

    by Isaac L de Almeida, Welinton F Vieira, Nara Os Souza, Fábio A Suinaga, Renato F Amabile, Marcelo Fagioli

    Desiccating herbicides can promote uniformity of maturation, and early harvest and provide improvements in the physical, physiological, and sanitary seeds quality. The objective of this work was to evaluate the use of herbicides in early harvest and in the physiological quality of chickpea seeds. The experimental design was of randomized blocks with four replications, considering a complete factorial design with one control (no application) + two factors (four herbicides x three different doses): glufosinate-ammonium (200, 400 and 500 g a.i./ha); diquat (200, 400 and 500 g a.i./ha); carfentrazoneethyl (15, 30 and 37.5 g a.i./ha) and saflufenacil (49, 98 and 122.5 g a.i./ha). Saflufenacil (49 g a.i./ha) showed the lowest harvest anticipation (4 days) and a low percentage of vigor (50.25%). Glufosinate (400 g a.i./ha), was the most promising as it increased germination to 83.75% and vigor to 78.25%, in addition to promoting the anticipation of harvest by up to 17 days, while the normal cycle of the crop, observed in the control, was 154 days.


  • Open Access

    Characterization of lettuce genotypes for resistance to root-knot nematodes (Meloidogyne spp.)

    by Jadir B Pinheiro, Giovani Olegário da Silva, Danielle Biscaia, Amanda G Macedo, Fábio A Suinaga

    Among the control methods available, the nematicides are not recommended, because the lettuce is a leafy vegetable with very short vegetative cycle, furthermore, do not exist nematicides registered for this crop. The crop rotation is often rejected by producers, because they need to earn income in small areas in an intensive way (Dutra et al., 2003). Therefore, the use of resistant cultivars is considered ideal to control nematodes (Oliveira et al., 2015; Wilcken et al., 2005). The genetic resistance of cultivars Salinas 88 (Carvalho Filho et al., 2007) and Grand Rapids (Gomes et al., 2000) to M. incognita, is assumed to be due to dominant genes with additive action to resistance, which facilitates obtaining resistant materials in breeding. However, are scarce in the literature informations about the levels of resistance of the main lettuce cultivars currently used in the country. Thus, the characterization of the resistance level of cultivars, besides being important for research, it is also important as information for the productive sector, that can choose the most resistant cultivars for their cultivation.


  • Open Access

    Research Article A RAPD-PCR-based genetic diversity analysis of Helicoverpa armigera and H. zea populations in Brazil.

    by H M Lopes, C S Bastos, L S Boiteux, J Foresti, F A Suinaga

    Helicoverpa armigera is the most significant pest of agriculture in Asia, Europe, Africa, and Australasia, causing damage to crops greater than US$2 billion annually and until 2013 it was not detected in Brazil. Helicoverpa zea is restricted to the American continent and is important to corn and a secondary pest of cotton and tomatoes. The wide range of crops exploited by H. armigera (mainly cotton, soybeans, chickpea, and corn), the possible mating between these species can promote population shifts, that could be assessed by RAPD-PCR technique. Therefore, the aim of this study was to determine the genetic diversity of H. armigera and H. zea populations by RAPD-PCR analysis. The most important result was the clustering of one H. armigera population in a group predominantly formed by H. zea. It could indicate a possible occurrence of an interspecific cross between these species. This is a concern to Brazilian agriculture due to the possibility of selection of hybrids well adapted to the American environment, which would be inherited from H. zea. The other noxious fact is the possible development of new biotypes resistant to insectides or Bt toxins expressed in transgenic crops, came from H. armigera gene pool.