Lukáš Dvořák
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lukáš Dvořák has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Arthur Merkel
MemBrain s. r. o. (Membrane Innovation Centre), Pod Vinicí 87, 471 27 Stráž pod Ralskem, Czech Republic
3 shared publications - Ladislav Čopák
MemBrain s. r. o. (Membrane Innovation Centre), Pod Vinicí 87, 471 27 Stráž pod Ralskem, Czech Republic
3 shared publications - Daniel V. Golubenko
Kurnakov Institute of General and Inorganic Chemistry, Russian Academy of Sciences, Moscow, Russia
2 shared publications Hadi Taghavian
Institute for Nanomaterials, Advanced Technologies and Innovation, Technical University of Liberec, Liberec 1, Czech Republic
2 shared publicationsJan Dolina
Institute for Nanomaterials, Advanced Technologies and Innovation, Technical University of Liberec, 461 17 Liberec, Czech Republic
2 shared publications- Libor Šeda
MemBrain s. r. o. (Membrane Innovation Centre), Pod Vinicí 87, 471 27 Stráž pod Ralskem, Czech Republic
2 shared publications
Latest Publications
- Open Access
- 22 July 2023
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-16
Advanced (bio)fouling resistant surface modification of PTFE hollow-fiber membranes for water treatment
Membrane surface treatment to modify anti-(bio)fouling resistivity plays a key role in membrane technology. This paper reports on the successful use of air-stimulated surface polymerization of dopamine hydrochloride incorporated ZnO nanoparticles (ZnO NPs) for impeding the intrinsic hydrophobicity and low anti-(bio)fouling resistivity of polytetrafluoroethylene (PTFE) hollow-fiber membranes (HFMs). The study involved the use of pristine and polydopamine (Pdopa) coated PTFE HFMs, both with and without the presence of an air supply and added ZnO NPs. Zeta potential measurements were performed to evaluate the dispersion stability of ZnO NPs prior to immobilization, while morphological characterization and time-dependency of the Pdopa growth layer were illustrated through scanning electron microscopy. Pdopa surface polymerization and ZnO NPs immobilization were confirmed using FT-IR and EDX spectroscopy. Transformation of the PTFE HFM surface features to superhydrophilic was demonstrated through water contact angle analysis and the stability of immobilized ZnO NPs assessed by ICP analysis. Anti-fouling criteria and (bio)fouling resistivity performance of the surface-modified membranes were assessed through flux recovery determination of bovine serum albumin in dead-end filtration as well as dynamic-contact-condition microbial evaluation against Staphylococcus spp. and Escherichia coli, respectively. The filtration recovery ratio and antimicrobial results suggested promising surface modification impacts on the anti-fouling properties of PTFE HFM. As such, the method represents the first successful use of air-stimulated Pdopa coating incorporating ZnO NPs to induce superhydrophilic PTFE HFM surface modification. Such a method can be extended to the other membranes associated with water treatment processes.
- 22 July 2023
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-16
Open AccessAdvanced (bio)fouling resistant surface modification of PTFE hollow-fiber membranes for water treatment
Membrane surface treatment to modify anti-(bio)fouling resistivity plays a key role in membrane technology. This paper reports on the successful use of air-stimulated surface polymerization of dopamine hydrochloride incorporated ZnO nanoparticles (ZnO NPs) for impeding the intrinsic hydrophobicity and low anti-(bio)fouling resistivity of polytetrafluoroethylene (PTFE) hollow-fiber membranes (HFMs). The study involved the use of pristine and polydopamine (Pdopa) coated PTFE HFMs, both with and without the presence of an air supply and added ZnO NPs. Zeta potential measurements were performed to evaluate the dispersion stability of ZnO NPs prior to immobilization, while morphological characterization and time-dependency of the Pdopa growth layer were illustrated through scanning electron microscopy. Pdopa surface polymerization and ZnO NPs immobilization were confirmed using FT-IR and EDX spectroscopy. Transformation of the PTFE HFM surface features to superhydrophilic was demonstrated through water contact angle analysis and the stability of immobilized ZnO NPs assessed by ICP analysis. Anti-fouling criteria and (bio)fouling resistivity performance of the surface-modified membranes were assessed through flux recovery determination of bovine serum albumin in dead-end filtration as well as dynamic-contact-condition microbial evaluation against Staphylococcus spp. and Escherichia coli, respectively. The filtration recovery ratio and antimicrobial results suggested promising surface modification impacts on the anti-fouling properties of PTFE HFM. As such, the method represents the first successful use of air-stimulated Pdopa coating incorporating ZnO NPs to induce superhydrophilic PTFE HFM surface modification. Such a method can be extended to the other membranes associated with water treatment processes.
- Open Access
- 22 May 2023
- Published by Springer Nature in Research Square
Advanced (bio)fouling resistant surface modification of PTFE hollow-fiber membranes for water treatment
Membrane surface treatment to modify anti-(bio)fouling resistivity plays a key role in membrane technology. This paper reports on the successful use of air-stimulated surface polymerization of dopamine hydrochloride incorporated ZnO nanoparticles (ZnO NPs) for impeding the intrinsic hydrophobicity and low anti-(bio)fouling resistivity of polytetrafluoroethylene (PTFE) hollow-fiber membranes (HFM), using pristine and polydopamine (Pdopa) coated PTFE HFMs with and without an air supply and added ZnO NPs. Zeta potential measurements were performed to evaluate the dispersion stability of ZnO NPs prior to immobilization, while morphological characterization and time-dependency of the Pdopa growth layer were illustrated through scanning electron microscopy. Pdopa surface polymerization and ZnO NPs immobilization were confirmed using FT-IR and EDX spectroscopy. Transformation of the PTFE HFM surface features to superhydrophilic was demonstrated through water contact angle analysis, and the stability of immobilized ZnO NPs assessed by ICP analysis. Anti-fouling criteria and biofouling resistivity performance of the surface-modified membranes were assessed through flux recovery determination of bovine serum albumin dead-end filtration and dynamic-contact-condition microbial evaluation against Staphylococcus spp. and Escherichia coli., respectively. The filtration recovery ratio and antimicrobial activity results suggested promising surface modification impacts on the anti-fouling properties of PTFE HFM. As such, the method represents the first successful use of air-stimulated Pdopa coating incorporating ZnO NPs to induce superhydrophilic PTFE HFM surface modification. Such a method can be extended to the other membranes associated with water treatment processes.
- 22 May 2023
- Published by Springer Nature in Research Square
Open AccessAdvanced (bio)fouling resistant surface modification of PTFE hollow-fiber membranes for water treatment
Membrane surface treatment to modify anti-(bio)fouling resistivity plays a key role in membrane technology. This paper reports on the successful use of air-stimulated surface polymerization of dopamine hydrochloride incorporated ZnO nanoparticles (ZnO NPs) for impeding the intrinsic hydrophobicity and low anti-(bio)fouling resistivity of polytetrafluoroethylene (PTFE) hollow-fiber membranes (HFM), using pristine and polydopamine (Pdopa) coated PTFE HFMs with and without an air supply and added ZnO NPs. Zeta potential measurements were performed to evaluate the dispersion stability of ZnO NPs prior to immobilization, while morphological characterization and time-dependency of the Pdopa growth layer were illustrated through scanning electron microscopy. Pdopa surface polymerization and ZnO NPs immobilization were confirmed using FT-IR and EDX spectroscopy. Transformation of the PTFE HFM surface features to superhydrophilic was demonstrated through water contact angle analysis, and the stability of immobilized ZnO NPs assessed by ICP analysis. Anti-fouling criteria and biofouling resistivity performance of the surface-modified membranes were assessed through flux recovery determination of bovine serum albumin dead-end filtration and dynamic-contact-condition microbial evaluation against Staphylococcus spp. and Escherichia coli., respectively. The filtration recovery ratio and antimicrobial activity results suggested promising surface modification impacts on the anti-fouling properties of PTFE HFM. As such, the method represents the first successful use of air-stimulated Pdopa coating incorporating ZnO NPs to induce superhydrophilic PTFE HFM surface modification. Such a method can be extended to the other membranes associated with water treatment processes.
- Open Access
Lactose Mother Liquor Stream Valorisation Using an Effective Electrodialytic Process
The integrated electrodialysis (ED) process supports valorisation of a lactose-rich side stream from the dairy industry, creating an important source of milk sugar used in various branches of the industry. This work focuses on the optimization of the downstream processes before the crystallization of lactose. The process line includes a pre-treatment and desalination by ED of the industrial waste solution of the lactose mother liquor (LML). The LML was diluted to 25% total solids to overcome hydraulic issues with the ED desalination process. Two different levels of electrical conductivity reduction (70% and 90%) of the LML solutions were applied to decrease the mineral components and organic acids of the LML samples. The ED performance parameters such as ash transfer rate (J), the specific capacity (CF) of the ED and specific electric energy consumption (E) were determined and the influence of the LML solution on the monopolar ion-exchange membranes has been investigated. A higher degree of desalination is associated with higher electric energy consumption (by 50%) and lower specific capacity (by 40%). A noticeable decrease (by 12.8%) in the resistance of the anion exchange membranes was measured after the trials whereas the resistance of the cation exchange membranes remained practically unchanged. Any deposition of the alkaline earth metals on the membrane surface was not observed.
Open AccessLactose Mother Liquor Stream Valorisation Using an Effective Electrodialytic Process
The integrated electrodialysis (ED) process supports valorisation of a lactose-rich side stream from the dairy industry, creating an important source of milk sugar used in various branches of the industry. This work focuses on the optimization of the downstream processes before the crystallization of lactose. The process line includes a pre-treatment and desalination by ED of the industrial waste solution of the lactose mother liquor (LML). The LML was diluted to 25% total solids to overcome hydraulic issues with the ED desalination process. Two different levels of electrical conductivity reduction (70% and 90%) of the LML solutions were applied to decrease the mineral components and organic acids of the LML samples. The ED performance parameters such as ash transfer rate (J), the specific capacity (CF) of the ED and specific electric energy consumption (E) were determined and the influence of the LML solution on the monopolar ion-exchange membranes has been investigated. A higher degree of desalination is associated with higher electric energy consumption (by 50%) and lower specific capacity (by 40%). A noticeable decrease (by 12.8%) in the resistance of the anion exchange membranes was measured after the trials whereas the resistance of the cation exchange membranes remained practically unchanged. Any deposition of the alkaline earth metals on the membrane surface was not observed.
- Open Access
- 1 June 2022
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 23 (11) , 6212
Recovery of Hydrochloric Acid from Industrial Wastewater by Diffusion Dialysis Using a Spiral-Wound Module
In the present study, the possibility of using a spiral-wound diffusion dialysis module was studied for the separation of hydrochloric acid and Zn2+, Ni2+, Cr3+, and Fe2+ salts. Diffusion dialysis recovered 68% of free HCl from the spent pickling solution contaminated with heavy-metal-ion salts. A higher volumetric flowrate of the stripping medium recovered a more significant portion of free acid, namely, 77%. Transition metals (Fe, Ni, Cr) apart from Zn were rejected by >85%. Low retention of Zn (35%) relates to the diffusion of negatively charged chloro complexes through the anion-exchange membrane. The mechanical and transport properties of dialysis FAD-PET membrane under accelerated degradation conditions was investigated. Long-term tests coupled with the economic study have verified that diffusion dialysis is a suitable method for the treatment of spent acids, the salts of which are well soluble in water. Calculations predict significant annual OPEX savings, approximately up to 58%, favouring diffusion dialysis for implementation into wastewater management.
- 1 June 2022
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 23 (11) , 6212
Open AccessRecovery of Hydrochloric Acid from Industrial Wastewater by Diffusion Dialysis Using a Spiral-Wound Module
In the present study, the possibility of using a spiral-wound diffusion dialysis module was studied for the separation of hydrochloric acid and Zn2+, Ni2+, Cr3+, and Fe2+ salts. Diffusion dialysis recovered 68% of free HCl from the spent pickling solution contaminated with heavy-metal-ion salts. A higher volumetric flowrate of the stripping medium recovered a more significant portion of free acid, namely, 77%. Transition metals (Fe, Ni, Cr) apart from Zn were rejected by >85%. Low retention of Zn (35%) relates to the diffusion of negatively charged chloro complexes through the anion-exchange membrane. The mechanical and transport properties of dialysis FAD-PET membrane under accelerated degradation conditions was investigated. Long-term tests coupled with the economic study have verified that diffusion dialysis is a suitable method for the treatment of spent acids, the salts of which are well soluble in water. Calculations predict significant annual OPEX savings, approximately up to 58%, favouring diffusion dialysis for implementation into wastewater management.
- Open Access
Chemical Cleaning Process of Polymeric Nanofibrous Membranes
Membrane fouling is one of the most significant issues to overcome in membrane-based technologies as it causes a decrease in the membrane flux and increases operational costs. This study investigates the effect of common chemical cleaning agents on polymeric nanofibrous membranes (PNM) prepared by polyvinylidene fluoride (PVDF), polyacrylonitrile (PAN), and polyamide 6 (PA6) nanofibers. Common alkaline and acid membrane cleaners were selected as the chemical cleaning agents. Membrane surface morphology was investigated. The PAN PNM were selected and fouled by engine oil and then cleaned by the different chemical cleaning agents at various ratios. The SEM results indicated that the use of chemical agents had some effects on the surface of the nanofibrous membranes. Moreover, alkaline cleaning of the fouled membrane using the Triton X 100 surfactant showed a two to five times higher flux recovery than without using a surfactant. Among the tested chemical agents, the highest flux recovery rate was obtained by a binary solution of 5% sodium hydroxide + Triton for alkaline cleaning, and an individual solution of 1% citric acid for acidic cleaning. The results presented here provide one of the first investigations into the chemical cleaning of nanofiber membranes.
Open AccessChemical Cleaning Process of Polymeric Nanofibrous Membranes
Membrane fouling is one of the most significant issues to overcome in membrane-based technologies as it causes a decrease in the membrane flux and increases operational costs. This study investigates the effect of common chemical cleaning agents on polymeric nanofibrous membranes (PNM) prepared by polyvinylidene fluoride (PVDF), polyacrylonitrile (PAN), and polyamide 6 (PA6) nanofibers. Common alkaline and acid membrane cleaners were selected as the chemical cleaning agents. Membrane surface morphology was investigated. The PAN PNM were selected and fouled by engine oil and then cleaned by the different chemical cleaning agents at various ratios. The SEM results indicated that the use of chemical agents had some effects on the surface of the nanofibrous membranes. Moreover, alkaline cleaning of the fouled membrane using the Triton X 100 surfactant showed a two to five times higher flux recovery than without using a surfactant. Among the tested chemical agents, the highest flux recovery rate was obtained by a binary solution of 5% sodium hydroxide + Triton for alkaline cleaning, and an individual solution of 1% citric acid for acidic cleaning. The results presented here provide one of the first investigations into the chemical cleaning of nanofiber membranes.
- Open Access
- 30 October 2021
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 22 (21) , 11819
Recovery of Spent Sulphuric Acid by Diffusion Dialysis Using a Spiral Wound Module
In this study, we assess the effects of volumetric flow and feed temperature on the performance of a spiral-wound module for the recovery of free acid using diffusion dialysis. Performance was evaluated using a set of equations based on mass balance under steady-state conditions that describe the free acid yield, rejection factors of metal ions and stream purity, along with chemical analysis of the outlet streams. The results indicated that an increase in the volumetric flow rate of water increased free acid yield from 88% to 93%, but decreased Cu2+ and Fe2+ ion rejection from 95% to 90% and 91% to 86%, respectively. Increasing feed temperature up to 40 °C resulted in an increase in acid flux of 9%, and a reduction in Cu2+ and Fe2+ ion rejection by 2–3%. Following diffusion dialysis, the only evidence of membrane degradation was a slight drop in permselectivity and an increase in diffusion acid and salt permeability. Results obtained from the laboratory tests used in a basic economic study showed that the payback time of the membrane-based regeneration unit is approximately one year.
- 30 October 2021
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 22 (21) , 11819
Open AccessRecovery of Spent Sulphuric Acid by Diffusion Dialysis Using a Spiral Wound Module
In this study, we assess the effects of volumetric flow and feed temperature on the performance of a spiral-wound module for the recovery of free acid using diffusion dialysis. Performance was evaluated using a set of equations based on mass balance under steady-state conditions that describe the free acid yield, rejection factors of metal ions and stream purity, along with chemical analysis of the outlet streams. The results indicated that an increase in the volumetric flow rate of water increased free acid yield from 88% to 93%, but decreased Cu2+ and Fe2+ ion rejection from 95% to 90% and 91% to 86%, respectively. Increasing feed temperature up to 40 °C resulted in an increase in acid flux of 9%, and a reduction in Cu2+ and Fe2+ ion rejection by 2–3%. Following diffusion dialysis, the only evidence of membrane degradation was a slight drop in permselectivity and an increase in diffusion acid and salt permeability. Results obtained from the laboratory tests used in a basic economic study showed that the payback time of the membrane-based regeneration unit is approximately one year.
- 1 August 2021
- Published by Elsevier in Science of The Total Environment
- Vol. 780, 146518
Application of nanofiber carriers for sampling of microbial biomass from contaminated groundwater
- 1 August 2021
- Published by Elsevier in Science of The Total Environment
- Vol. 780, 146518
Application of nanofiber carriers for sampling of microbial biomass from contaminated groundwater
- Open Access
- 18 April 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (26) , 14552-14560
Modification of a hollow-fibre polyethersulfone membrane using silver nanoparticles formed in situ for biofouling prevention
Biofouling represents a serious problem limiting the widespread application of membrane technology. Therefore, the aim of this study was to develop and verify a new modification method based on the in situ formation of silver nanoparticles and their incorporation into a membrane polymer to prevent biofouling. The modification method consisted of soaking a commercial hollow-fibre polyethersulfone membrane in a solution of silver ions, diffusion of ions into the membrane polymer, and their reduction using ascorbic acid. Such a modified membrane displayed a lower tendency towards biofouling, exhibiting an about 15% higher permeability compared to an unmodified membrane when filtering actual wastewater treatment plant effluent. The modification also led to the formation of stable silver nanoparticles (mostly in the range of 25–50 nm) homogenously distributed on the surface of the hollow-fibres. This resulted in higher surface hydrophilicity (the water contact angle decreased from 91° to 86°) contributing to the biofouling prevention. The modified membrane also showed high stability, as only 2.1% of the total silver leached after 8 h of filtration. Moreover, no changes in the original membrane cross-section structure or separation properties were observed. Besides the improved antibiofouling properties of the modified membrane, the main advantage of the developed method is its simplicity, short reaction time, absence of high energy-consuming initiation, and the possibility to apply it on site, thus even with commercial membrane modules. It will increase the application potential of membranes in the field of wastewater treatment.
- 18 April 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (26) , 14552-14560
Open AccessModification of a hollow-fibre polyethersulfone membrane using silver nanoparticles formed in situ for biofouling prevention
Biofouling represents a serious problem limiting the widespread application of membrane technology. Therefore, the aim of this study was to develop and verify a new modification method based on the in situ formation of silver nanoparticles and their incorporation into a membrane polymer to prevent biofouling. The modification method consisted of soaking a commercial hollow-fibre polyethersulfone membrane in a solution of silver ions, diffusion of ions into the membrane polymer, and their reduction using ascorbic acid. Such a modified membrane displayed a lower tendency towards biofouling, exhibiting an about 15% higher permeability compared to an unmodified membrane when filtering actual wastewater treatment plant effluent. The modification also led to the formation of stable silver nanoparticles (mostly in the range of 25–50 nm) homogenously distributed on the surface of the hollow-fibres. This resulted in higher surface hydrophilicity (the water contact angle decreased from 91° to 86°) contributing to the biofouling prevention. The modified membrane also showed high stability, as only 2.1% of the total silver leached after 8 h of filtration. Moreover, no changes in the original membrane cross-section structure or separation properties were observed. Besides the improved antibiofouling properties of the modified membrane, the main advantage of the developed method is its simplicity, short reaction time, absence of high energy-consuming initiation, and the possibility to apply it on site, thus even with commercial membrane modules. It will increase the application potential of membranes in the field of wastewater treatment.
- 1 April 2017
- Published by Elsevier in Bioresource Technology
- Vol. 229, 180-189
Performance of an anaerobic membrane bioreactor for pharmaceutical wastewater treatment
- 1 April 2017
- Published by Elsevier in Bioresource Technology
- Vol. 229, 180-189
Performance of an anaerobic membrane bioreactor for pharmaceutical wastewater treatment
- 1 August 2016
- Published by Elsevier in Chemosphere
- Vol. 157, 276-285
Dynamics of organohalide-respiring bacteria and their genes following in-situ chemical oxidation of chlorinated ethenes and biostimulation
- 1 August 2016
- Published by Elsevier in Chemosphere
- Vol. 157, 276-285
Dynamics of organohalide-respiring bacteria and their genes following in-situ chemical oxidation of chlorinated ethenes and biostimulation