Mohammad Tawhid Kawser
Mohammad Tawhid Kawser has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Rashed Hasan Ratul
Department of Electrical and Electronic Engineering Islamic University of Technology (IUT) Dhaka Bangladesh
2 shared publications Samiur Rahman
2 shared publicationsAadnan Farhad
Islamic University of Technology,Department of Electrical and Electronic Engineering,Gazipur,Bangladesh
1 shared publication- Abdullah Alavi
Metropolitan University,Department of Computer Science and Engineering,Sylhet,Bangladesh
1 shared publication Atiqul Haque
Islamic Univ Technol, Dept Elect & Elect Engn, Gazipur, Bangladesh
1 shared publication- Hwang-Cheng Wang
National Ilan University
1 shared publication
Latest Publications
- 30 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Hybrid PSOCSA-Driven Power Allocation for Capacity and Spectral Efficiency Optimization in Spatially Correlated MIMO Systems
In this paper, we propose a novel hybrid opti-mization framework for maximizing the capacity and spectral efficiency of MIMO systems with spatially correlated antennas under Rayleigh fading channels. The system model incorporates Doppler shift to account for mobility and applies a power allocation scheme optimized using a Hybrid Particle Swarm Opti-mization and Chameleon Swarm Algorithm (PSOCSA). Singular Value Decomposition (SVD) is employed to efficiently decompose the MIMO channel into independent sub-channels, with power allocated to maximize the system capacity. Detailed mathematical formulations of the channel capacity, incorporating both antenna correlation and Doppler effects, are provided. Comparative analysis demonstrates that the proposed PSOCSA algorithm significantly outperforms other state-of-the-art algorithms, such as Whale Optimization(WOA), Particle Swarm Optimization (PSO), Chameleon Swarm Algorithm (CSA), Harris Hawks Op-timization (HHO), and Sine Cosine Algorithm (SCA) in terms of both computational efficiency and capacity maximization across various MIMO configurations (4×4, 8×8, 16×16, 64×64). Our results indicate that PSOCSA achieves superior performance with the lowest computational time and higher stability, making it a promising approach for real-time optimization and enhancement of the efficiency of MIMO systems in next-generation wireless networks.
- 30 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Hybrid PSOCSA-Driven Power Allocation for Capacity and Spectral Efficiency Optimization in Spatially Correlated MIMO Systems
In this paper, we propose a novel hybrid opti-mization framework for maximizing the capacity and spectral efficiency of MIMO systems with spatially correlated antennas under Rayleigh fading channels. The system model incorporates Doppler shift to account for mobility and applies a power allocation scheme optimized using a Hybrid Particle Swarm Opti-mization and Chameleon Swarm Algorithm (PSOCSA). Singular Value Decomposition (SVD) is employed to efficiently decompose the MIMO channel into independent sub-channels, with power allocated to maximize the system capacity. Detailed mathematical formulations of the channel capacity, incorporating both antenna correlation and Doppler effects, are provided. Comparative analysis demonstrates that the proposed PSOCSA algorithm significantly outperforms other state-of-the-art algorithms, such as Whale Optimization(WOA), Particle Swarm Optimization (PSO), Chameleon Swarm Algorithm (CSA), Harris Hawks Op-timization (HHO), and Sine Cosine Algorithm (SCA) in terms of both computational efficiency and capacity maximization across various MIMO configurations (4×4, 8×8, 16×16, 64×64). Our results indicate that PSOCSA achieves superior performance with the lowest computational time and higher stability, making it a promising approach for real-time optimization and enhancement of the efficiency of MIMO systems in next-generation wireless networks.
- Open Access
- 26 December 2023
- Published by MDPI AG in Foundations
- Vol. 4 (1) , 14-31
The Potential Impact of a High-Frequency Telecommunication Network on Cognitive Functions: A Review
The latest cellular technology, known as 5G-NR, is intended to significantly speed up and improve the effectiveness of wireless systems. A revolution in the telecom industry has been sparked by the widespread use of and increased reliance on cellular communication technology. Moreover, 5G and B5G technologies are expected to utilize an even higher-frequency range to achieve faster data transmission and lower latency communication. Consequently, while transmitting signals across various types of equipment and infrastructure, the general public is exposed to much higher frequencies of electromagnetic radiation. The increasing need for 5G NR base stations (gNodeB) has heightened public anxiety over potential negative health impacts. This study reviews recent research on the effects of electromagnetic waves on humans, particularly focusing on how these effects influence cognitive functions. Most research to date has not found significant differences in cognitive performance due to ubiquitous mobile communications. However, current research has largely been limited to 4G technologies, and the health effects of exposure to 5G user equipment (UE) and base stations in higher-frequency bands remain unexplored. If subsequent research suggests that exposure to high-frequency wireless networks significantly impacts cognitive functions, the deployment and acceptance of these technologies may face challenges and constraints. Therefore, such investigations are crucial for determining whether next-generation technologies pose no risk to individuals.
- 26 December 2023
- Published by MDPI AG in Foundations
- Vol. 4 (1) , 14-31
Open AccessThe Potential Impact of a High-Frequency Telecommunication Network on Cognitive Functions: A Review
The latest cellular technology, known as 5G-NR, is intended to significantly speed up and improve the effectiveness of wireless systems. A revolution in the telecom industry has been sparked by the widespread use of and increased reliance on cellular communication technology. Moreover, 5G and B5G technologies are expected to utilize an even higher-frequency range to achieve faster data transmission and lower latency communication. Consequently, while transmitting signals across various types of equipment and infrastructure, the general public is exposed to much higher frequencies of electromagnetic radiation. The increasing need for 5G NR base stations (gNodeB) has heightened public anxiety over potential negative health impacts. This study reviews recent research on the effects of electromagnetic waves on humans, particularly focusing on how these effects influence cognitive functions. Most research to date has not found significant differences in cognitive performance due to ubiquitous mobile communications. However, current research has largely been limited to 4G technologies, and the health effects of exposure to 5G user equipment (UE) and base stations in higher-frequency bands remain unexplored. If subsequent research suggests that exposure to high-frequency wireless networks significantly impacts cognitive functions, the deployment and acceptance of these technologies may face challenges and constraints. Therefore, such investigations are crucial for determining whether next-generation technologies pose no risk to individuals.
- 15 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Performance Comparison of DPS in NOMA for Different MIMO Antenna Configurations
The demand for an ever-increasing data rate and the growing number of users means that newer multiple-access technologies need to be developed. The paper considers how multiple input and multiple output (MIMO) systems can be implemented with non-orthogonal multiple access (NOMA) to determine the performance shift for dynamic power allocation schemes (DPS). Dynamic power allocation scheme is considered due to the wireless medium’s volatile nature. Monte-Carlo simulation has been used in this study and log-normal shadowing has been used as the path loss model. Rayleigh fading channel is considered for non-line of sight communication. The goal is to find the average spectral efficiency and outage probability for this setup for a range of antenna configurations from $2 \times 1$ to $4 \times 4$ and observe the variation across different antenna numbers. Both the near and the far users’ performance has been investigated. The findings show that although there is a definite pattern in MIMO for the far users, there is no such pattern for the near users. For a single antenna system, the near user performs better in average spectral efficiency up to a designated power level, after which MIMO takes over. For the far user, MIMO always outperforms the single antenna system. Also, several MIMO configurations are simulated to find the best-performing antenna system. The results conclude that as the transmitted power increases, the MIMO systems with the greater number of antennas perform better. However, this is not the case for the lower power level.- 15 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Performance Comparison of DPS in NOMA for Different MIMO Antenna Configurations
The demand for an ever-increasing data rate and the growing number of users means that newer multiple-access technologies need to be developed. The paper considers how multiple input and multiple output (MIMO) systems can be implemented with non-orthogonal multiple access (NOMA) to determine the performance shift for dynamic power allocation schemes (DPS). Dynamic power allocation scheme is considered due to the wireless medium’s volatile nature. Monte-Carlo simulation has been used in this study and log-normal shadowing has been used as the path loss model. Rayleigh fading channel is considered for non-line of sight communication. The goal is to find the average spectral efficiency and outage probability for this setup for a range of antenna configurations from $2 \times 1$ to $4 \times 4$ and observe the variation across different antenna numbers. Both the near and the far users’ performance has been investigated. The findings show that although there is a definite pattern in MIMO for the far users, there is no such pattern for the near users. For a single antenna system, the near user performs better in average spectral efficiency up to a designated power level, after which MIMO takes over. For the far user, MIMO always outperforms the single antenna system. Also, several MIMO configurations are simulated to find the best-performing antenna system. The results conclude that as the transmitted power increases, the MIMO systems with the greater number of antennas perform better. However, this is not the case for the lower power level.- Open Access
Performance Comparison Between VoLTE and non-VoLTE Voice Calls During Mobility in Commercial Deployment: A Drive Test-Based Analysis
The optimization of network performance is vital for the delivery of services using standard cellular technologies for mobile communications. Call setup delay and User Equipment (UE) battery savings significantly influence network performance. Improving these factors is vital for ensuring optimal service delivery. In comparison to traditional circuit-switched voice calls, VoLTE (Voice over LTE) technology offers faster call setup durations and better battery-saving performance. To validate these claims, a drive test was carried out using the XCAL drive test tool to collect real-time network parameter details in VoLTE and non-VoLTE voice calls. The findings highlight the analysis of real-time network characteristics, such as the call setup delay calculation, battery-saving performance, and DRX mechanism. The study contributes to the understanding of network optimization strategies and provides insights for enhancing the quality of service (QoS) in mobile communication networks. Examining VoLTE and non-VoLTE operations, this research highlights the substantial energy savings obtained by VoLTE. Specifically, VoLTE saves approximately 60.76% of energy before the Service Request and approximately 38.97% of energy after the Service Request. Moreover, VoLTE to VoLTE calls have a 72.6% faster call setup delay than non-VoLTE-based LTE to LTE calls, because of fewer signaling messages required. Furthermore, as compared to non-VoLTE to non-VoLTE calls, VoLTE to non-VoLTE calls offer an 18.6% faster call setup delay. These results showcase the performance advantages of VoLTE and reinforce its potential for offering better services in wireless communication networks.
Open AccessPerformance Comparison Between VoLTE and non-VoLTE Voice Calls During Mobility in Commercial Deployment: A Drive Test-Based Analysis
The optimization of network performance is vital for the delivery of services using standard cellular technologies for mobile communications. Call setup delay and User Equipment (UE) battery savings significantly influence network performance. Improving these factors is vital for ensuring optimal service delivery. In comparison to traditional circuit-switched voice calls, VoLTE (Voice over LTE) technology offers faster call setup durations and better battery-saving performance. To validate these claims, a drive test was carried out using the XCAL drive test tool to collect real-time network parameter details in VoLTE and non-VoLTE voice calls. The findings highlight the analysis of real-time network characteristics, such as the call setup delay calculation, battery-saving performance, and DRX mechanism. The study contributes to the understanding of network optimization strategies and provides insights for enhancing the quality of service (QoS) in mobile communication networks. Examining VoLTE and non-VoLTE operations, this research highlights the substantial energy savings obtained by VoLTE. Specifically, VoLTE saves approximately 60.76% of energy before the Service Request and approximately 38.97% of energy after the Service Request. Moreover, VoLTE to VoLTE calls have a 72.6% faster call setup delay than non-VoLTE-based LTE to LTE calls, because of fewer signaling messages required. Furthermore, as compared to non-VoLTE to non-VoLTE calls, VoLTE to non-VoLTE calls offer an 18.6% faster call setup delay. These results showcase the performance advantages of VoLTE and reinforce its potential for offering better services in wireless communication networks.
- 20 July 2023
- Published by Polish Academy of Sciences Chancellery in International Journal of Electronics and Telecommunications
- Vol. 69 (1) , 147-153
Quick Handover in 5G for High Speed Railways and Highways Using Forward Handover and PN Sequence Detection
- 20 July 2023
- Published by Polish Academy of Sciences Chancellery in International Journal of Electronics and Telecommunications
- Vol. 69 (1) , 147-153
Quick Handover in 5G for High Speed Railways and Highways Using Forward Handover and PN Sequence Detection