Hiroshi Suto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Hiroshi Suto has a total of 65 co-authors. Here are the top co-authors by number of shared publications:
- Akihiko Kuze
Japan Aerospace Exploration Agency, Tsukuba-city, Ibaraki, Japan
11 shared publications Kei Shiomi
Japan Aerospace Exploration Agency
5 shared publications- Kei Shiomi
Japan Aerospace Exploration Agency, Tsukuba, Ibaraki, Japan
5 shared publications Fumie Kataoka
4 shared publications- Fumie Kataoka
Remote Sensing Technology Center of Japan, Tsukuba, Japan
4 shared publications Tomohiro Oda
4 shared publications
Latest Publications
- Open Access
- 1 August 2026
- Published by IOP Publishing in Environmental Research Communications
- Vol. 8 (8) , 085015
On the utility of simultaneous CO 2 and CO observations from GOSAT-2: examining global urban emissions and their socioeconomic characteristics
Urban areas are major sources of greenhouse gas (GHG) and air pollutant emissions. Given their substantial potential for mitigation, urban emissions need to be accurately monitored in a timely manner. Satellite observations have proven to be a practical approach -and an independent, objective verification support tool- for monitoring emissions from urban areas worldwide. In particular, the combined use of co-emitted GHG and air pollutant data, such as Carbon Dioxide (CO 2 ) and Carbon Monoxide (CO), can help characterize combustion type and efficiency across different countries and regions, as well as monitor changes in response to economic development and/or mitigation policy measures. This study examines the utility of space-based GHG and air quality (AQ) data collected by the Greenhouse Gases Observing Satellite-2 (GOSAT-2, 2018-present) for studying urban emissions. GOSAT-2 uniquely collects GHG and CO data simultaneously, enabling co-emitted gas analysis without requiring co-located satellite data. In particular, this study uses partial column CO 2 data and total column CO data retrieved for 2018–2021. We estimate concentration enhancements of CO 2 and CO over 65 urban areas worldwide (population > 1 million) and examine their relationships. We find that the CO 2 –CO relationship is well represented by the Modified Environmental Kuznets Curve, which describes the link between AQ and economic development. We also examine CO/CO 2 ratios calculated using GOSAT-2 data and the Emissions Database for Global Atmospheric Research (EDGAR) inventory. Urban areas in Southeast Asia and Africa regions show large discrepancies (>40%) between ratios from GOSAT-2 and EDGAR, which might be attributable to biofuel use that is poorly represented in inventories. These findings suggest that simultaneous CO 2 and CO observations could help monitor emissions in regions with less robust bottom-up estimates. Such observations also provide a top–down, independent assessment of emission inventories and progress toward sustainable development goals.
- 1 August 2026
- Published by IOP Publishing in Environmental Research Communications
- Vol. 8 (8) , 085015
Open AccessOn the utility of simultaneous CO 2 and CO observations from GOSAT-2: examining global urban emissions and their socioeconomic characteristics
Urban areas are major sources of greenhouse gas (GHG) and air pollutant emissions. Given their substantial potential for mitigation, urban emissions need to be accurately monitored in a timely manner. Satellite observations have proven to be a practical approach -and an independent, objective verification support tool- for monitoring emissions from urban areas worldwide. In particular, the combined use of co-emitted GHG and air pollutant data, such as Carbon Dioxide (CO 2 ) and Carbon Monoxide (CO), can help characterize combustion type and efficiency across different countries and regions, as well as monitor changes in response to economic development and/or mitigation policy measures. This study examines the utility of space-based GHG and air quality (AQ) data collected by the Greenhouse Gases Observing Satellite-2 (GOSAT-2, 2018-present) for studying urban emissions. GOSAT-2 uniquely collects GHG and CO data simultaneously, enabling co-emitted gas analysis without requiring co-located satellite data. In particular, this study uses partial column CO 2 data and total column CO data retrieved for 2018–2021. We estimate concentration enhancements of CO 2 and CO over 65 urban areas worldwide (population > 1 million) and examine their relationships. We find that the CO 2 –CO relationship is well represented by the Modified Environmental Kuznets Curve, which describes the link between AQ and economic development. We also examine CO/CO 2 ratios calculated using GOSAT-2 data and the Emissions Database for Global Atmospheric Research (EDGAR) inventory. Urban areas in Southeast Asia and Africa regions show large discrepancies (>40%) between ratios from GOSAT-2 and EDGAR, which might be attributable to biofuel use that is poorly represented in inventories. These findings suggest that simultaneous CO 2 and CO observations could help monitor emissions in regions with less robust bottom-up estimates. Such observations also provide a top–down, independent assessment of emission inventories and progress toward sustainable development goals.
- Open Access
- 24 March 2026
- Published by Elsevier in SSRN Electronic Journal
Evaluating JAXA/GOSAT two-layer XCO2 with aircraft measurements and OCO-2 MIP simulations
The Japan Aerospace Exploration Agency (JAXA) has developed a novel partial column CO2 (XCO2) dataset from Japan’s Greenhouse Gases Observing Satellite (GOSAT) that partitions XCO2 into contributions from the lower troposphere (surface to ~4 km a.g.l.) and upper troposphere (~4 km to ~12 km a.g.l.). Evaluating this two-layer product is essential for its application in studies of atmospheric CO2 distributions and surface fluxes. Here, we assess the JAXA/GOSAT two-layer XCO2 using aircraft measurements from ACT-America, ATom, NOAA aircraft profiling network, and other available datasets, along with global model ensembles from the OCO-2 Model Intercomparison Project (MIP). GOSAT XCO2 generally agrees well with aircraft measurements in zonal means for both tropospheric layers, demonstrating its ability to capture large-scale vertical CO2 structures. A notable low bias of up to 10 ppm is identified in northern high latitudes (50°–80°N). Over northern midlatitudes, particularly North America where aircraft coverage is most extensive, GOSAT shows better agreement with observations in lower-tropospheric XCO2 than the OCO-2 MIP simulations, suggesting potential biases in model surface fluxes and/or transport. Significant differences between GOSAT and OCO-2 MIP are found in both layers over the Amazon (2–10 ppm), southern China (0–8 ppm), India (5–8 ppm), tropical Africa (2–10 ppm), and the Arctic (>10 ppm). However, limited aircraft data in these regions constrain independent validation. Our findings demonstrate that the GOSAT two-layer XCO2 provides a valuable constraint for identifying possible biases in CO2 fluxes and vertical mixing in current global models and has potential to improve surface CO2 flux inversions.
- 24 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessEvaluating JAXA/GOSAT two-layer XCO2 with aircraft measurements and OCO-2 MIP simulations
The Japan Aerospace Exploration Agency (JAXA) has developed a novel partial column CO2 (XCO2) dataset from Japan’s Greenhouse Gases Observing Satellite (GOSAT) that partitions XCO2 into contributions from the lower troposphere (surface to ~4 km a.g.l.) and upper troposphere (~4 km to ~12 km a.g.l.). Evaluating this two-layer product is essential for its application in studies of atmospheric CO2 distributions and surface fluxes. Here, we assess the JAXA/GOSAT two-layer XCO2 using aircraft measurements from ACT-America, ATom, NOAA aircraft profiling network, and other available datasets, along with global model ensembles from the OCO-2 Model Intercomparison Project (MIP). GOSAT XCO2 generally agrees well with aircraft measurements in zonal means for both tropospheric layers, demonstrating its ability to capture large-scale vertical CO2 structures. A notable low bias of up to 10 ppm is identified in northern high latitudes (50°–80°N). Over northern midlatitudes, particularly North America where aircraft coverage is most extensive, GOSAT shows better agreement with observations in lower-tropospheric XCO2 than the OCO-2 MIP simulations, suggesting potential biases in model surface fluxes and/or transport. Significant differences between GOSAT and OCO-2 MIP are found in both layers over the Amazon (2–10 ppm), southern China (0–8 ppm), India (5–8 ppm), tropical Africa (2–10 ppm), and the Arctic (>10 ppm). However, limited aircraft data in these regions constrain independent validation. Our findings demonstrate that the GOSAT two-layer XCO2 provides a valuable constraint for identifying possible biases in CO2 fluxes and vertical mixing in current global models and has potential to improve surface CO2 flux inversions.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Evaluating the JAXA GOSAT CO2 retrieval product using NASA CO2 retrieval products and NOAA Carbon Tracker
Space-based Greenhouse Gas (GHG) observations done by Japan’s Greenhouse Gas Observing Satellite (GOSAT) and NASA’s Orbiting Carbon Observatory (OCO) missions have collected long term and spatially dense CO2 data globally. The satellite GHG data have contributed to the monitoring of global CO2 concentrations and the detection of their regional and local changes. Given the high stake of the climate and environment applications, the evaluation of the space-based GHG data is a critical task. Space-based GHG data are often compared to data collected at ~ 30 Total Carbon Column Observing Network (TCCON) sites for examining potential biases and errors. Bias-correction methods are often developed based on the comparison to the TCCON data. While satellite GHG data products often show good agreement with TCCON data, we still see regional disagreements among different GHG data. We argue that the TCCON-based evaluation is powerful, but limited, and thus further evaluations of satellite GHG products are necessary. Recently, JAXA developed a new GOSAT GHG product named JAXA/GHG product. Our retrieval product includes total and partial column concentration values of CO2, CH4, H2O as well as solar-induced chlorophyll fluorescence (SIF). The JAXA/GHG GOSAT CO2 product is compared to NASA’s Atmospheric Carbon Observations from Space (ACOS)-GOSAT L2 full physics retrieval data, NASA’s OCO-2 satellite-based L2 full physics retrieval data, as well as simulated CO2 from the Carbon Tracker global atmospheric inversion system developed by NOAA Global Monitoring Laboratory. Our XCO2 comparisons with other satellite products show regional discrepancies over the Pacific Ocean, central Africa, south-east Asia (land), and Amazon areas. The results suggest that these discrepancies could be attributable to retrieved surface pressure and aerosol properties. We also compare near surface and upper tropospheric partial CO2 retrieved values to Carbon Tracker simulated values. These comparisons show the systematic positive discrepancy (~2-3 ppm) in JAXA’s near surface (surface to ~ 4km) CO2 concentration over the oceans against Carbon Tracker.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessEvaluating the JAXA GOSAT CO2 retrieval product using NASA CO2 retrieval products and NOAA Carbon Tracker
Space-based Greenhouse Gas (GHG) observations done by Japan’s Greenhouse Gas Observing Satellite (GOSAT) and NASA’s Orbiting Carbon Observatory (OCO) missions have collected long term and spatially dense CO2 data globally. The satellite GHG data have contributed to the monitoring of global CO2 concentrations and the detection of their regional and local changes. Given the high stake of the climate and environment applications, the evaluation of the space-based GHG data is a critical task. Space-based GHG data are often compared to data collected at ~ 30 Total Carbon Column Observing Network (TCCON) sites for examining potential biases and errors. Bias-correction methods are often developed based on the comparison to the TCCON data. While satellite GHG data products often show good agreement with TCCON data, we still see regional disagreements among different GHG data. We argue that the TCCON-based evaluation is powerful, but limited, and thus further evaluations of satellite GHG products are necessary. Recently, JAXA developed a new GOSAT GHG product named JAXA/GHG product. Our retrieval product includes total and partial column concentration values of CO2, CH4, H2O as well as solar-induced chlorophyll fluorescence (SIF). The JAXA/GHG GOSAT CO2 product is compared to NASA’s Atmospheric Carbon Observations from Space (ACOS)-GOSAT L2 full physics retrieval data, NASA’s OCO-2 satellite-based L2 full physics retrieval data, as well as simulated CO2 from the Carbon Tracker global atmospheric inversion system developed by NOAA Global Monitoring Laboratory. Our XCO2 comparisons with other satellite products show regional discrepancies over the Pacific Ocean, central Africa, south-east Asia (land), and Amazon areas. The results suggest that these discrepancies could be attributable to retrieved surface pressure and aerosol properties. We also compare near surface and upper tropospheric partial CO2 retrieved values to Carbon Tracker simulated values. These comparisons show the systematic positive discrepancy (~2-3 ppm) in JAXA’s near surface (surface to ~ 4km) CO2 concentration over the oceans against Carbon Tracker.
- Open Access
- 16 August 2024
- Published by Springer Nature in Carbon Balance and Management
- Vol. 19 (1) , 1-17
The Greenhouse gas Observations of Biospheric and Local Emissions from the Upper sky (GOBLEU): a mission overview, instrument description, and results from the first flight
Background: The Greenhouse gas Observations of Biospheric and Local Emissions from the Upper sky (GOBLEU) is a new joint project by Japan Aerospace Exploration Agency (JAXA) and ANA HOLDING INC. (ANAHD), which operates ANA flights. GOBLEU aims to visualizes our climate mitigation effort progress in support of subnational climate mitigation by collecting greenhouse gas (GHG) data as well as relevant data for emissions (nitrous dioxide, NO2) and removals (Solar-Induced Fluorescence, SIF) from regular passenger flights. We developed a luggage-sized instrument based on the space remote-sensing techniques that JAXA has developed for Japan’s Greenhouse gas Observing SATellite (GOSAT). The instrument can be conveniently installed on a coach-class passenger seat without modifying the seat or the aircraft. Results: The first GOBLEU observation was made on the flight from the Tokyo Haneda Airport to the Fukuoka Airport, with only the NO2 module activated. The collected high-spatial-resolution NO2 data were compared to that from the TROPOspheric Monitoring Instrument (TROPOMI) satellite and surface NO2 data from ground-based air quality monitoring stations. While GOBLEU and TROPOMI data shared the major concentration patterns largely driven by cities and large point sources, regardless of different observation times, we found fine-scale concentration pattern differences, which might be an indication of potential room for GOBLEU to bring in new emission information and thus is worth further examination. We also characterized the levels of NO2 spatial correlation that change over time. The quickly degrading correlation level of GOBLEU and TROPOMI suggests a potentially significant impact of the time difference between CO2 and NO2 as an emission marker and, thus, the significance of co-located observations planned by future space missions. Conclusions: GOBLEU proposes aircraft-based, cost-effective, frequent monitoring of greenhouse emissions by GOBLEU instruments carried on regular passenger aircraft. Theoretically, the GOBLEU instrument can be installed and operated in most commercially used passenger aircraft without modifications. JAXA and ANAHD wish to promote the observation technique by expanding the observation coverage and partnership to other countries by enhancing international cooperation under the Paris Agreement.
- 16 August 2024
- Published by Springer Nature in Carbon Balance and Management
- Vol. 19 (1) , 1-17
Open AccessThe Greenhouse gas Observations of Biospheric and Local Emissions from the Upper sky (GOBLEU): a mission overview, instrument description, and results from the first flight
Background: The Greenhouse gas Observations of Biospheric and Local Emissions from the Upper sky (GOBLEU) is a new joint project by Japan Aerospace Exploration Agency (JAXA) and ANA HOLDING INC. (ANAHD), which operates ANA flights. GOBLEU aims to visualizes our climate mitigation effort progress in support of subnational climate mitigation by collecting greenhouse gas (GHG) data as well as relevant data for emissions (nitrous dioxide, NO2) and removals (Solar-Induced Fluorescence, SIF) from regular passenger flights. We developed a luggage-sized instrument based on the space remote-sensing techniques that JAXA has developed for Japan’s Greenhouse gas Observing SATellite (GOSAT). The instrument can be conveniently installed on a coach-class passenger seat without modifying the seat or the aircraft. Results: The first GOBLEU observation was made on the flight from the Tokyo Haneda Airport to the Fukuoka Airport, with only the NO2 module activated. The collected high-spatial-resolution NO2 data were compared to that from the TROPOspheric Monitoring Instrument (TROPOMI) satellite and surface NO2 data from ground-based air quality monitoring stations. While GOBLEU and TROPOMI data shared the major concentration patterns largely driven by cities and large point sources, regardless of different observation times, we found fine-scale concentration pattern differences, which might be an indication of potential room for GOBLEU to bring in new emission information and thus is worth further examination. We also characterized the levels of NO2 spatial correlation that change over time. The quickly degrading correlation level of GOBLEU and TROPOMI suggests a potentially significant impact of the time difference between CO2 and NO2 as an emission marker and, thus, the significance of co-located observations planned by future space missions. Conclusions: GOBLEU proposes aircraft-based, cost-effective, frequent monitoring of greenhouse emissions by GOBLEU instruments carried on regular passenger aircraft. Theoretically, the GOBLEU instrument can be installed and operated in most commercially used passenger aircraft without modifications. JAXA and ANAHD wish to promote the observation technique by expanding the observation coverage and partnership to other countries by enhancing international cooperation under the Paris Agreement.
- Open Access
- 22 September 2022
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 15 (18) , 5399-5413
Updated spectral radiance calibration on TIR bands for TANSO-FTS-2 onboard GOSAT-2
The Thermal and Near-Infrared Sensor for Carbon Observation Fourier-Transform Spectrometer-2 (TANSO-FTS-2) onboard the Japanese Greenhouse Gases Observing SATellite-2 (GOSAT-2) observes a wide spectral region of the atmosphere, from the ShortWave-InfraRed (SWIR) to the longwave Thermal InfraRed radiation (TIR) with 0.2 cm−1 spectral sampling, and the corresponding spectral resolution (full width at half maximum, FWHM) of TIR region is less than 0.27 cm−1. TANSO-FTS-2 has operated nominally since February 2019, and the atmospheric radiance spectra it has acquired have been released to the public. This paper describes an updated model for spectral radiance calibration and its validation. The model applies to the version v210210 TIR products of TANSO-FTS-2 and integrates polarization sensitivity correction for the internal optics and the pointing mirror thermal emission. These correction parameters are characterized by an optimization that depends on the difference between the spectral radiance of TANSO-FTS-2 and coincident nadir observation data from the Infrared Atmospheric Sounding Interferometer (IASI) on METOP-B. To validate the updated spectral radiance product against other satellite products, temporally and spatially coincident observation points were considered for the simultaneous nadir overpass (SNO) from February 2019 to March 2021 from the Atmospheric Infrared Sounder (AIRS) on Aqua, IASI on METOP-B, and TANSO-FTS on GOSAT. The agreement of brightness temperatures between TANSO-FTS-2 and AIRS and IASI was better than 0.3 K (1σ) from 180 to 330 K for the 680 cm−1 CO2 spectral range. The brightness temperatures between TANSO-FTS-2 and TANSO-FTS of version v230231, which implemented a new polarization reflectivity of the pointing mirror and was released in June 2021, generally agree from 220 to 320 K. However, there is a discrepancy at lower brightness temperatures, pronounced for CO2 spectral ranges at high latitudes. To characterize the spectral radiance bias for along-track and cross-track angles, a 2-orthogonal simultaneous off-nadir overpass (2O-SONO) is now done for TANSO-FTS-2 and IASI, TANSO-FTS-2 and AIRS, and TANSO-FTS-2 and TANSO-FTS. The 2O-SONO comparison results indicate that the TIR product for TANSO-FTS-2 has a bias that exceeds 0.5 K in the CO2 spectral range for scenes with forward and backward viewing angles greater than 20∘. These multi-satellite sensor and multi-angle comparison results suggest that the calibration of spectral radiance for TANSO-FTS-2 TIR, version v210210, is superior to that of the previous version in its consistency of multi-satellite sensor data. In addition, the paper identifies the remaining challenging issues in current TIR products.
- 22 September 2022
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 15 (18) , 5399-5413
Open AccessUpdated spectral radiance calibration on TIR bands for TANSO-FTS-2 onboard GOSAT-2
The Thermal and Near-Infrared Sensor for Carbon Observation Fourier-Transform Spectrometer-2 (TANSO-FTS-2) onboard the Japanese Greenhouse Gases Observing SATellite-2 (GOSAT-2) observes a wide spectral region of the atmosphere, from the ShortWave-InfraRed (SWIR) to the longwave Thermal InfraRed radiation (TIR) with 0.2 cm−1 spectral sampling, and the corresponding spectral resolution (full width at half maximum, FWHM) of TIR region is less than 0.27 cm−1. TANSO-FTS-2 has operated nominally since February 2019, and the atmospheric radiance spectra it has acquired have been released to the public. This paper describes an updated model for spectral radiance calibration and its validation. The model applies to the version v210210 TIR products of TANSO-FTS-2 and integrates polarization sensitivity correction for the internal optics and the pointing mirror thermal emission. These correction parameters are characterized by an optimization that depends on the difference between the spectral radiance of TANSO-FTS-2 and coincident nadir observation data from the Infrared Atmospheric Sounding Interferometer (IASI) on METOP-B. To validate the updated spectral radiance product against other satellite products, temporally and spatially coincident observation points were considered for the simultaneous nadir overpass (SNO) from February 2019 to March 2021 from the Atmospheric Infrared Sounder (AIRS) on Aqua, IASI on METOP-B, and TANSO-FTS on GOSAT. The agreement of brightness temperatures between TANSO-FTS-2 and AIRS and IASI was better than 0.3 K (1σ) from 180 to 330 K for the 680 cm−1 CO2 spectral range. The brightness temperatures between TANSO-FTS-2 and TANSO-FTS of version v230231, which implemented a new polarization reflectivity of the pointing mirror and was released in June 2021, generally agree from 220 to 320 K. However, there is a discrepancy at lower brightness temperatures, pronounced for CO2 spectral ranges at high latitudes. To characterize the spectral radiance bias for along-track and cross-track angles, a 2-orthogonal simultaneous off-nadir overpass (2O-SONO) is now done for TANSO-FTS-2 and IASI, TANSO-FTS-2 and AIRS, and TANSO-FTS-2 and TANSO-FTS. The 2O-SONO comparison results indicate that the TIR product for TANSO-FTS-2 has a bias that exceeds 0.5 K in the CO2 spectral range for scenes with forward and backward viewing angles greater than 20∘. These multi-satellite sensor and multi-angle comparison results suggest that the calibration of spectral radiance for TANSO-FTS-2 TIR, version v210210, is superior to that of the previous version in its consistency of multi-satellite sensor data. In addition, the paper identifies the remaining challenging issues in current TIR products.
- Top Cited PapersOpen Access
- 12 March 2021
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 14 (3) , 2013-2039
Thermal and near-infrared sensor for carbon observation Fourier transform spectrometer-2 (TANSO-FTS-2) on the Greenhouse gases Observing SATellite-2 (GOSAT-2) during its first year in orbit
The Japanese Greenhouse gases Observing SATellite-2 (GOSAT-2), in orbit since 29 October 2018, follows up the GOSAT mission, itself in orbit since 23 January 2009. GOSAT-2 monitors carbon dioxide and methane in order to increase our understanding of the global carbon cycle. It simultaneously measures carbon monoxide emitted from fossil fuel combustion and biomass burning and permits identification of the amount of combustion-related carbon. To do this, the satellite utilizes the Thermal and Near Infrared Sensor for Carbon Observation Fourier-Transform Spectrometer-2 (TANSO-FTS-2). This spectrometer detects gas absorption spectra of solar radiation reflected from the Earth's surface in the shortwave-infrared (SWIR) region as well as the emitted thermal infrared radiation (TIR) from the ground and the atmosphere. TANSO-FTS-2 can measure the oxygen A band (0.76 µm), weak and strong CO2 bands (1.6 and 2.0 µm), weak and strong CH4 bands (1.6 and 2.3 µm), a weak CO band (2.3 µm), a mid-wave TIR band (5.5–8.4 µm), and a long-wave TIR band (8.4–14.3 µm) with 0.2 cm−1 spectral sampling intervals. TANSO-FTS-2 is equipped with a solar diffuser target, a monochromatic light source, and a blackbody for spectral radiance calibration. These calibration sources permit characterization of time-dependent instrument changes in orbit. The onboard-recalibrated instrumental parameters are considered in operational level-1 processing and released as TANSO-FTS-2 level-1 version 102102 products, which were officially released on 25 May 2020. This paper provides an overview of the TANSO-FTS-2 instrument, the level-1 processing, and the first-year in-orbit performance. To validate the spectral radiance calibration during the first year of operation, the spectral radiance of the version 102102 product is compared at temporally coincident and spatially collocated points from February 2019 to March 2020 with TANSO-FTS on GOSAT for SWIR and with AIRS on Aqua and IASI on METOP-B for TIR. The spectral radiances measured by TANSO-FTS and TANSO-FTS-2 agree within 2 % of the averaged bias and 0.5 % standard deviation for SWIR bands. The agreement of brightness temperature between TANSO-FTS-2 and AIRS–IASI is better than 1 K in the range from 220 to 320 K. GOSAT-2 not only provides seamless global CO2 and CH4 observation but also observes local emissions and uptake with an additional CO channel, fully customized sampling patterns, higher signal-to-noise ratios, and wider pointing angles than GOSAT.
- 12 March 2021
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 14 (3) , 2013-2039
Top Cited PapersOpen AccessThermal and near-infrared sensor for carbon observation Fourier transform spectrometer-2 (TANSO-FTS-2) on the Greenhouse gases Observing SATellite-2 (GOSAT-2) during its first year in orbit
The Japanese Greenhouse gases Observing SATellite-2 (GOSAT-2), in orbit since 29 October 2018, follows up the GOSAT mission, itself in orbit since 23 January 2009. GOSAT-2 monitors carbon dioxide and methane in order to increase our understanding of the global carbon cycle. It simultaneously measures carbon monoxide emitted from fossil fuel combustion and biomass burning and permits identification of the amount of combustion-related carbon. To do this, the satellite utilizes the Thermal and Near Infrared Sensor for Carbon Observation Fourier-Transform Spectrometer-2 (TANSO-FTS-2). This spectrometer detects gas absorption spectra of solar radiation reflected from the Earth's surface in the shortwave-infrared (SWIR) region as well as the emitted thermal infrared radiation (TIR) from the ground and the atmosphere. TANSO-FTS-2 can measure the oxygen A band (0.76 µm), weak and strong CO2 bands (1.6 and 2.0 µm), weak and strong CH4 bands (1.6 and 2.3 µm), a weak CO band (2.3 µm), a mid-wave TIR band (5.5–8.4 µm), and a long-wave TIR band (8.4–14.3 µm) with 0.2 cm−1 spectral sampling intervals. TANSO-FTS-2 is equipped with a solar diffuser target, a monochromatic light source, and a blackbody for spectral radiance calibration. These calibration sources permit characterization of time-dependent instrument changes in orbit. The onboard-recalibrated instrumental parameters are considered in operational level-1 processing and released as TANSO-FTS-2 level-1 version 102102 products, which were officially released on 25 May 2020. This paper provides an overview of the TANSO-FTS-2 instrument, the level-1 processing, and the first-year in-orbit performance. To validate the spectral radiance calibration during the first year of operation, the spectral radiance of the version 102102 product is compared at temporally coincident and spatially collocated points from February 2019 to March 2020 with TANSO-FTS on GOSAT for SWIR and with AIRS on Aqua and IASI on METOP-B for TIR. The spectral radiances measured by TANSO-FTS and TANSO-FTS-2 agree within 2 % of the averaged bias and 0.5 % standard deviation for SWIR bands. The agreement of brightness temperature between TANSO-FTS-2 and AIRS–IASI is better than 1 K in the range from 220 to 320 K. GOSAT-2 not only provides seamless global CO2 and CH4 observation but also observes local emissions and uptake with an additional CO channel, fully customized sampling patterns, higher signal-to-noise ratios, and wider pointing angles than GOSAT.
- Open Access
- 4 March 2021
- Published by Copernicus GmbH
Monitoring the nations’ climate mitigation progress using multi-species observations from Japanese passenger aircrafts
The greenhouse gas (GHG) emissions from cities account for more than 70% of the global emissions. Over the past decades, GHG-dedicated space-based instruments, such as Japan’s Greenhouse gases Observing SATellite (GOSAT) (2009-), GOSAT-2 (2018-), NASA’s Orbiting Carbon Observatory-2 (OCO-2) (2014-), and OCO-3 (2019-), have collected the increased amount of the GHG data on the global scale, especially over urban areas. Such data have provided new opportunities to explore ways to study urban emissions, and they will also play a key role in monitoring the progress of subnational climate mitigation efforts towards the Paris Climate Agreement goal.Here we present the first high-resolution multi-species (CO2 and NO2) observations from Japanese passenger aircrafts, which should further enhance our ability to quantify GHG emissions in combination with data collected from existing ground-based stations and satellites. Our multi-species observations should also provide direct technical and scientific implications to the planned future space missions, such as Japan’s Global Observing SATellite for Greenhouse gases and Water cycle (GOSAT-GW) and ESA’s CO2 Monitoring Mission (CO2M), which also plan to measure CO2 and NO2 with a special focus on monitoring GHG emissions.We designed and developed a carry-on luggage sized imaging spectrometer to collect high-resolution (a few handed m to a few thousand m) CO2 and NO2 concentration data during domestic passenger flights. We conducted our first observation during the flight between Tokyo and Fukuoka in October 2020. The two-hour flight allowed us to collect sounding data ranging from 130°E to 140°E in longitude and 33.5°N to 36°N in latitude. The data were being collected every 0.5 sec in nominal and were created up to 5M soundings during the single flight. The obtained data depicted spatial patterns of CO2and NO2 concentrations over the cities and industrial areas, with some notable differences from ones seen from existing satellite observations. We compared our data to other data, such as emission inventories, and satellite observations of CO2, NO2, and nighttime lights, in order to further characterize the observed spatial gradient and patterns.In our presentation, we will also discuss the unique utility of our new aircraft observation and its potential contribution to GHG emission monitoring and the upcoming Global Stocktakes (GST) with an expanded observation coverage and frequency.
- 4 March 2021
- Published by Copernicus GmbH
Open AccessMonitoring the nations’ climate mitigation progress using multi-species observations from Japanese passenger aircrafts
The greenhouse gas (GHG) emissions from cities account for more than 70% of the global emissions. Over the past decades, GHG-dedicated space-based instruments, such as Japan’s Greenhouse gases Observing SATellite (GOSAT) (2009-), GOSAT-2 (2018-), NASA’s Orbiting Carbon Observatory-2 (OCO-2) (2014-), and OCO-3 (2019-), have collected the increased amount of the GHG data on the global scale, especially over urban areas. Such data have provided new opportunities to explore ways to study urban emissions, and they will also play a key role in monitoring the progress of subnational climate mitigation efforts towards the Paris Climate Agreement goal.Here we present the first high-resolution multi-species (CO2 and NO2) observations from Japanese passenger aircrafts, which should further enhance our ability to quantify GHG emissions in combination with data collected from existing ground-based stations and satellites. Our multi-species observations should also provide direct technical and scientific implications to the planned future space missions, such as Japan’s Global Observing SATellite for Greenhouse gases and Water cycle (GOSAT-GW) and ESA’s CO2 Monitoring Mission (CO2M), which also plan to measure CO2 and NO2 with a special focus on monitoring GHG emissions.We designed and developed a carry-on luggage sized imaging spectrometer to collect high-resolution (a few handed m to a few thousand m) CO2 and NO2 concentration data during domestic passenger flights. We conducted our first observation during the flight between Tokyo and Fukuoka in October 2020. The two-hour flight allowed us to collect sounding data ranging from 130°E to 140°E in longitude and 33.5°N to 36°N in latitude. The data were being collected every 0.5 sec in nominal and were created up to 5M soundings during the single flight. The obtained data depicted spatial patterns of CO2and NO2 concentrations over the cities and industrial areas, with some notable differences from ones seen from existing satellite observations. We compared our data to other data, such as emission inventories, and satellite observations of CO2, NO2, and nighttime lights, in order to further characterize the observed spatial gradient and patterns.In our presentation, we will also discuss the unique utility of our new aircraft observation and its potential contribution to GHG emission monitoring and the upcoming Global Stocktakes (GST) with an expanded observation coverage and frequency.
- Open Access
- 13 January 2020
- Published by MDPI AG in Remote Sensing
- Vol. 12 (2) , 267
Detection of Methane Emission from a Local Source Using GOSAT Target Observations
Emissions of atmospheric methane (CH4), which greatly contributes to radiative forcing, have larger uncertainties than those for carbon dioxide (CO2). The Thermal And Near-infrared Sensor for carbon Observation Fourier-Transform Spectrometer (TANSO-FTS) onboard the Greenhouse gases Observing SATellite (GOSAT) launched in 2009 has demonstrated global grid observations of the total column density of CO2 and CH4 from space, and thus reduced uncertainty in the global flux estimation. In this paper, we present a case study on local CH4 emission detection from a single-point source using an available series of GOSAT data. By modifying the grid observation pattern, the pointing mechanism of TANSO-FTS targets a natural gas leak point at Aliso Canyon in Southern California, where the clear-sky frequency is high. To enhance local emission estimates, we retrieved CO2 and CH4 partial column-averaged dry-air mole fractions of the lower troposphere (XCO2 (LT) and XCH4 (LT)) by simultaneous use of both sunlight reflected from Earth’s surface and thermal emissions from the atmosphere. The time-series data of Aliso Canyon showed a large enhancement that decreased with time after its initial blowout, compared with reference point data and filtered with wind direction simulated by the Weather Research and Forecasting (WRF) model.
- 13 January 2020
- Published by MDPI AG in Remote Sensing
- Vol. 12 (2) , 267
Open AccessDetection of Methane Emission from a Local Source Using GOSAT Target Observations
Emissions of atmospheric methane (CH4), which greatly contributes to radiative forcing, have larger uncertainties than those for carbon dioxide (CO2). The Thermal And Near-infrared Sensor for carbon Observation Fourier-Transform Spectrometer (TANSO-FTS) onboard the Greenhouse gases Observing SATellite (GOSAT) launched in 2009 has demonstrated global grid observations of the total column density of CO2 and CH4 from space, and thus reduced uncertainty in the global flux estimation. In this paper, we present a case study on local CH4 emission detection from a single-point source using an available series of GOSAT data. By modifying the grid observation pattern, the pointing mechanism of TANSO-FTS targets a natural gas leak point at Aliso Canyon in Southern California, where the clear-sky frequency is high. To enhance local emission estimates, we retrieved CO2 and CH4 partial column-averaged dry-air mole fractions of the lower troposphere (XCO2 (LT) and XCH4 (LT)) by simultaneous use of both sunlight reflected from Earth’s surface and thermal emissions from the atmosphere. The time-series data of Aliso Canyon showed a large enhancement that decreased with time after its initial blowout, compared with reference point data and filtered with wind direction simulated by the Weather Research and Forecasting (WRF) model.
- Open Access
- 19 December 2019
- Published by Wiley in ESS Open Archive
Estimation of anthropogenic GHG emission rate for different sources in Japanese megacity by using airborne imaging-spectrometer suites
In almost Japanese megacities, various CO2 and CH4 emission source like industrial activity (power plant, landfills, gas factory, water processing plants), and agricultural activity (rice cultivation, pig farm) are concentrated within a few tens kilometers region. In order to estimate CO2 and CH4 emission rate for above various different sources, we newly developed airborne Imaging-spectrometer suites which consist of NIR spectrometer for O2-A band measurement and SWIR spectrometer for CO2/CH4 measurement. We also developed quick algorithm based on nonlinear fitting of synthetic spectrum to observation spectrum by optimization of column density of CO2 / CH4 and instrumental characteristic parameter simultaneously. The algorithm takes less than 20 second per 1 retrieval by using laptop computer, and we will challenge further acceleration by more than tens of times in order to realize real-time observation. For the first flight, we selected the eastern part of the Nagoya urban area, in which there are large CO2 emission sources, including a coal power plant and the transportation sector, and possible CH4 sources from agriculture, energy manufacturing, and waste that are geographically mixed. The results of observing the Hekinan power plant (coal-fired power generation) over Aichi Prefecture on Feb. 16, 2018 are shown in Figure 1. At the Hekinan Power Station, enhancement of CO2 column-averaged mole fractions are observed, and it can be seen that the high concentration area extends toward the downwind side. The accuracy of column density calculated by the quick algorithm will be validated with ground observation data. We estimated emission rate of CO2 of Hekinan Power plant.
- 19 December 2019
- Published by Wiley in ESS Open Archive
Open AccessEstimation of anthropogenic GHG emission rate for different sources in Japanese megacity by using airborne imaging-spectrometer suites
In almost Japanese megacities, various CO2 and CH4 emission source like industrial activity (power plant, landfills, gas factory, water processing plants), and agricultural activity (rice cultivation, pig farm) are concentrated within a few tens kilometers region. In order to estimate CO2 and CH4 emission rate for above various different sources, we newly developed airborne Imaging-spectrometer suites which consist of NIR spectrometer for O2-A band measurement and SWIR spectrometer for CO2/CH4 measurement. We also developed quick algorithm based on nonlinear fitting of synthetic spectrum to observation spectrum by optimization of column density of CO2 / CH4 and instrumental characteristic parameter simultaneously. The algorithm takes less than 20 second per 1 retrieval by using laptop computer, and we will challenge further acceleration by more than tens of times in order to realize real-time observation. For the first flight, we selected the eastern part of the Nagoya urban area, in which there are large CO2 emission sources, including a coal power plant and the transportation sector, and possible CH4 sources from agriculture, energy manufacturing, and waste that are geographically mixed. The results of observing the Hekinan power plant (coal-fired power generation) over Aichi Prefecture on Feb. 16, 2018 are shown in Figure 1. At the Hekinan Power Station, enhancement of CO2 column-averaged mole fractions are observed, and it can be seen that the high concentration area extends toward the downwind side. The accuracy of column density calculated by the quick algorithm will be validated with ground observation data. We estimated emission rate of CO2 of Hekinan Power plant.
- Open Access
- 11 November 2017
- Published by MDPI AG in Remote Sensing
- Vol. 9 (11) , 1158
The Cross-Calibration of Spectral Radiances and Cross-Validation of CO2 Estimates from GOSAT and OCO-2
The Greenhouse gases Observing SATellite (GOSAT) launched in January 2009 has provided radiance spectra with a Fourier Transform Spectrometer for more than eight years. The Orbiting Carbon Observatory 2 (OCO-2) launched in July 2014, collects radiance spectra using an imaging grating spectrometer. Both sensors observe sunlight reflected from Earth’s surface and retrieve atmospheric carbon dioxide (CO2) concentrations, but use different spectrometer technologies, observing geometries, and ground track repeat cycles. To demonstrate the effectiveness of satellite remote sensing for CO2 monitoring, the GOSAT and OCO-2 teams have worked together pre- and post-launch to cross-calibrate the instruments and cross-validate their retrieval algorithms and products. In this work, we first compare observed radiance spectra within three narrow bands centered at 0.76, 1.60 and 2.06 µm, at temporally coincident and spatially collocated points from September 2014 to March 2017. We reconciled the differences in observation footprints size, viewing geometry and associated differences in surface bidirectional reflectance distribution function (BRDF). We conclude that the spectral radiances measured by the two instruments agree within 5% for all bands. Second, we estimated mean bias and standard deviation of column-averaged CO2 dry air mole fraction (XCO2) retrieved from GOSAT and OCO-2 from September 2014 to May 2016. GOSAT retrievals used Build 7.3 (V7.3) of the Atmospheric CO2 Observations from Space (ACOS) algorithm while OCO-2 retrievals used Version 7 of the OCO-2 retrieval algorithm. The mean biases and standard deviations are −0.57 ± 3.33 ppm over land with high gain, −0.17 ± 1.48 ppm over ocean with high gain and −0.19 ± 2.79 ppm over land with medium gain. Finally, our study is complemented with an analysis of error sources: retrieved surface pressure (Psurf), aerosol optical depth (AOD), BRDF and surface albedo inhomogeneity. We found no change in XCO2 bias or standard deviation with time, demonstrating that both instruments are well calibrated.
- 11 November 2017
- Published by MDPI AG in Remote Sensing
- Vol. 9 (11) , 1158
Open AccessThe Cross-Calibration of Spectral Radiances and Cross-Validation of CO2 Estimates from GOSAT and OCO-2
The Greenhouse gases Observing SATellite (GOSAT) launched in January 2009 has provided radiance spectra with a Fourier Transform Spectrometer for more than eight years. The Orbiting Carbon Observatory 2 (OCO-2) launched in July 2014, collects radiance spectra using an imaging grating spectrometer. Both sensors observe sunlight reflected from Earth’s surface and retrieve atmospheric carbon dioxide (CO2) concentrations, but use different spectrometer technologies, observing geometries, and ground track repeat cycles. To demonstrate the effectiveness of satellite remote sensing for CO2 monitoring, the GOSAT and OCO-2 teams have worked together pre- and post-launch to cross-calibrate the instruments and cross-validate their retrieval algorithms and products. In this work, we first compare observed radiance spectra within three narrow bands centered at 0.76, 1.60 and 2.06 µm, at temporally coincident and spatially collocated points from September 2014 to March 2017. We reconciled the differences in observation footprints size, viewing geometry and associated differences in surface bidirectional reflectance distribution function (BRDF). We conclude that the spectral radiances measured by the two instruments agree within 5% for all bands. Second, we estimated mean bias and standard deviation of column-averaged CO2 dry air mole fraction (XCO2) retrieved from GOSAT and OCO-2 from September 2014 to May 2016. GOSAT retrievals used Build 7.3 (V7.3) of the Atmospheric CO2 Observations from Space (ACOS) algorithm while OCO-2 retrievals used Version 7 of the OCO-2 retrieval algorithm. The mean biases and standard deviations are −0.57 ± 3.33 ppm over land with high gain, −0.17 ± 1.48 ppm over ocean with high gain and −0.19 ± 2.79 ppm over land with medium gain. Finally, our study is complemented with an analysis of error sources: retrieved surface pressure (Psurf), aerosol optical depth (AOD), BRDF and surface albedo inhomogeneity. We found no change in XCO2 bias or standard deviation with time, demonstrating that both instruments are well calibrated.