Kazuomi Sugamoto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kazuomi Sugamoto has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Hideki Yoshikawa
Department of Orthopaedic Surgery, Osaka University, Osaka, 565-0871, Japan
7 shared publications - Tsuyoshi Murase
Department of Orthopaedic Surgery, Bell Land General Hospital, Sakai, Osaka, Japan
5 shared publications - Kunihiro Oka
The University of Osaka, Graduate school of Medicine
4 shared publications - Hisao Moritomo
Department of Orthopaedics, Osaka University Graduate School of Medicine, Osaka, Japan
3 shared publications - Tetsuya Tomita
T. Tomita, MD, Graduate School of Health Science, Morinomiya University of Medical Science, Osaka, Japan
3 shared publications - Hiroyuki Tanaka
Department of Sports Medical Science, Graduate School of Medicine, Osaka University, Suita, Osaka, Japan
2 shared publications
Latest Publications
- Open Access
- 17 February 2020
- Published by Springer Nature in BMC Musculoskeletal Disorders
- Vol. 21 (1) , 1-8
Semi-constrained posterior stabilized total knee arthroplasty reproduces natural deep knee bending kinematics
Background: The Flexible Nichidai Knee Posterior Stabilized (FNK-PS) system was designed to provide relatively high varus-valgus stabilities without the stem extensions to patients with severe knee joint disorders. This is a combination of a large tibial post and high femoral cam adapted to a PS system. The aim of our study was to analyze the in vivo two-dimensional/three-dimensional registration kinematics of the FNK PS-total knee arthroplasty (TKA) system during deep knee bending.Methods: Nineteen knees from 15 total knee arthroplasty (TKA) patients who were able to squat with enough knee flexion were selected. During deep knee bending under weight bearing (WB) and non-weight bearing (NWB) conditions, we quantified range of motion, axial rotation, femoral anteroposterior translation, and post-cam engagement angle.Results: The maximum-flexion was significantly different between the two conditions. The mean axial femoral external rotation was 4.8° and 6.2° under WB and NWB conditions, respectively, at 120° flexion. Anteroposterior translation based on bicondylar posterior roll-back patterns was noted with increasing knee flexion. Both the medial and lateral femoral aspects were significantly more posterior during early to mid-flexion. Initial post-cam engagement occurred significantly earlier during flexion under NWB than under WB conditions. Under WB, the timing of the post-cam engagement correlated with the maximum flexion .Conclusions: The kinematics of the semi-constrained PS system reproducibly exhibited a mild external rotation with smooth posterior roll-back. This was assisted by the engagement of the large tibial post and high femoral cam during the early phase of flexion.
- 17 February 2020
- Published by Springer Nature in BMC Musculoskeletal Disorders
- Vol. 21 (1) , 1-8
Open AccessSemi-constrained posterior stabilized total knee arthroplasty reproduces natural deep knee bending kinematics
Background: The Flexible Nichidai Knee Posterior Stabilized (FNK-PS) system was designed to provide relatively high varus-valgus stabilities without the stem extensions to patients with severe knee joint disorders. This is a combination of a large tibial post and high femoral cam adapted to a PS system. The aim of our study was to analyze the in vivo two-dimensional/three-dimensional registration kinematics of the FNK PS-total knee arthroplasty (TKA) system during deep knee bending.Methods: Nineteen knees from 15 total knee arthroplasty (TKA) patients who were able to squat with enough knee flexion were selected. During deep knee bending under weight bearing (WB) and non-weight bearing (NWB) conditions, we quantified range of motion, axial rotation, femoral anteroposterior translation, and post-cam engagement angle.Results: The maximum-flexion was significantly different between the two conditions. The mean axial femoral external rotation was 4.8° and 6.2° under WB and NWB conditions, respectively, at 120° flexion. Anteroposterior translation based on bicondylar posterior roll-back patterns was noted with increasing knee flexion. Both the medial and lateral femoral aspects were significantly more posterior during early to mid-flexion. Initial post-cam engagement occurred significantly earlier during flexion under NWB than under WB conditions. Under WB, the timing of the post-cam engagement correlated with the maximum flexion .Conclusions: The kinematics of the semi-constrained PS system reproducibly exhibited a mild external rotation with smooth posterior roll-back. This was assisted by the engagement of the large tibial post and high femoral cam during the early phase of flexion.
- 1 August 2019
- Published by Elsevier in Osteoarthritis and Cartilage
- Vol. 27 (8) , 1152-1162
Cartilage wear patterns in severe osteoarthritis of the trapeziometacarpal joint: a quantitative analysis
- 1 August 2019
- Published by Elsevier in Osteoarthritis and Cartilage
- Vol. 27 (8) , 1152-1162
Cartilage wear patterns in severe osteoarthritis of the trapeziometacarpal joint: a quantitative analysis
- 1 January 2018
- Published by Elsevier in Osteoarthritis and Cartilage
- Vol. 26 (1) , 72-83
Altered bone density and stress distribution patterns in long-standing cubitus varus deformity and their effect during early osteoarthritis of the elbow
- 1 January 2018
- Published by Elsevier in Osteoarthritis and Cartilage
- Vol. 26 (1) , 72-83
Altered bone density and stress distribution patterns in long-standing cubitus varus deformity and their effect during early osteoarthritis of the elbow
- Open Access
- 16 November 2017
- Published by Springer Nature in BMC Musculoskeletal Disorders
- Vol. 18 (1) , 1-8
Differences in vertebral morphology around the apical vertebrae between neuromuscular scoliosis and idiopathic scoliosis in skeletally immature patients: a three-dimensional morphometric analysis
Recent morphological analyses of vertebrae in patients with scoliosis have revealed three-dimensional (3D) deformities in the vertebral bodies. However, it remains controversial whether these deformities are secondary changes caused by asymmetrical vertebral loading or primary changes caused by aberrant asymmetrical vertebral growth. Furthermore, the difference in vertebral morphology between scoliosis with different pathogeneses remains unclear. This study was aimed to investigate the difference in the coronal asymmetry of vertebral bodies between neuromuscular scoliosis (NS) in Duchenne muscular dystrophy (DMD) and idiopathic scoliosis (IS) using in vivo 3D analysis. Twelve male skeletally immature patients with NS in DMD and 13 female skeletally immature patients with IS who underwent corrective fusion at our institution were included retrospectively. 3D bone models of the apical and adjacent upper and lower vertebrae in the major curve in the NS patients and in the main and compensatory curves in the IS patients were constructed using an image processing workstation. The heights of the concave and convex sides of the vertebral bodies were measured at the anterior, middle, and posterior and the concave-to-convex vertebral height ratios (VHR) were calculated. The mean VHRs (anterior/middle/posterior) for the main curve for IS (0.897 ± 0.072/0.832 ± 0.086/0.883 ± 0.059) were significantly smaller than those for NS (0.970 ± 0.048/0.934 ± 0.081/0.958 ± 0.043) in all three parts (p < 0.001). Those of the compensatory curve in IS (0.968 ± 0.045/0.942 ± 0.067/0.967 ± 0.046) did not differ significantly from the NS values in any part. When compared to the wedging of the vertebral bodies around apical vertebrae in the major curve in NS, which was caused by asymmetric loading, the wedge deformities in both the main and compensatory curves in IS were more severe than would be expected. Our results indicated that morphometric characteristics of vertebral bodies differed according to the pathogenesis of scoliosis and that the pathology of the wedging of vertebral bodies in IS could not be a result only of asymmetric loading to the vertebral bodies.
- 16 November 2017
- Published by Springer Nature in BMC Musculoskeletal Disorders
- Vol. 18 (1) , 1-8
Open AccessDifferences in vertebral morphology around the apical vertebrae between neuromuscular scoliosis and idiopathic scoliosis in skeletally immature patients: a three-dimensional morphometric analysis
Recent morphological analyses of vertebrae in patients with scoliosis have revealed three-dimensional (3D) deformities in the vertebral bodies. However, it remains controversial whether these deformities are secondary changes caused by asymmetrical vertebral loading or primary changes caused by aberrant asymmetrical vertebral growth. Furthermore, the difference in vertebral morphology between scoliosis with different pathogeneses remains unclear. This study was aimed to investigate the difference in the coronal asymmetry of vertebral bodies between neuromuscular scoliosis (NS) in Duchenne muscular dystrophy (DMD) and idiopathic scoliosis (IS) using in vivo 3D analysis. Twelve male skeletally immature patients with NS in DMD and 13 female skeletally immature patients with IS who underwent corrective fusion at our institution were included retrospectively. 3D bone models of the apical and adjacent upper and lower vertebrae in the major curve in the NS patients and in the main and compensatory curves in the IS patients were constructed using an image processing workstation. The heights of the concave and convex sides of the vertebral bodies were measured at the anterior, middle, and posterior and the concave-to-convex vertebral height ratios (VHR) were calculated. The mean VHRs (anterior/middle/posterior) for the main curve for IS (0.897 ± 0.072/0.832 ± 0.086/0.883 ± 0.059) were significantly smaller than those for NS (0.970 ± 0.048/0.934 ± 0.081/0.958 ± 0.043) in all three parts (p < 0.001). Those of the compensatory curve in IS (0.968 ± 0.045/0.942 ± 0.067/0.967 ± 0.046) did not differ significantly from the NS values in any part. When compared to the wedging of the vertebral bodies around apical vertebrae in the major curve in NS, which was caused by asymmetric loading, the wedge deformities in both the main and compensatory curves in IS were more severe than would be expected. Our results indicated that morphometric characteristics of vertebral bodies differed according to the pathogenesis of scoliosis and that the pathology of the wedging of vertebral bodies in IS could not be a result only of asymmetric loading to the vertebral bodies.
- Open Access
- 12 October 2016
- Published by Springer Nature in BMC Musculoskeletal Disorders
- Vol. 17 (1) , 424
Plasticity of vertebral wedge deformities in skeletally immature patients with adolescent idiopathic scoliosis after posterior corrective surgery
Vertebral bodies in patients with adolescent idiopathic scoliosis (AIS) usually have frontal wedge deformities. However, the plasticity of the deformed vertebrae in skeletally immature patients is unknown. The purpose of our study was to clarify the plasticity of vertebral deformities in skeletally immature patients with AIS by using in vivo three-dimensional (3D) analysis. Ten female patients with AIS (mean age, 12.2 years; three patients, Lenke type 1; five patients, type 2; two patients, type 5) who underwent posterior fusion and whose Risser grade was ≤3 at surgery were included. Using computed tomography images (0.625-mm slice thickness) obtained 1 week and 1 year postoperatively, a total of seventy-three 3D bone models of vertebrae was made. The 3D bone models were made between the upper and lower end vertebrae within the main thoracic curve for patients with Lenke types 1 and 2 scoliosis, whereas they were made within the thoracolumbar/lumbar curve in patients with Lenke type 5 scoliosis. The height of the concave and convex sides in the anterior, middle and posterior parts of the vertebral bodies was measured using the original digital viewer, and the vertebral height ratio (VHR: concave/convex) was calculated. VHRs at 1 week and 1 year postoperatively were compared using the Wilcoxson signed-rank test. Differences were considered statistically significant at p < 0.05. VHR of the end vertebrae (n = 20) did not change postoperatively for any parts of the vertebral bodies. VHR of the vertebrae in the apical region (n = 28) also remained unchanged postoperatively. In contrast, VHR of the other vertebrae (n = 25) increased significantly in the anterior part postoperatively (from 0.938 to 0.961, p = 0.006). The wedge deformity of vertebral bodies showed a reshaping potential towards a symmetrical configuration in the region other than end and apex, although no plasticity of the vertebrae was observed in the apical region even in skeletally immature patients with AIS.
- 12 October 2016
- Published by Springer Nature in BMC Musculoskeletal Disorders
- Vol. 17 (1) , 424
Open AccessPlasticity of vertebral wedge deformities in skeletally immature patients with adolescent idiopathic scoliosis after posterior corrective surgery
Vertebral bodies in patients with adolescent idiopathic scoliosis (AIS) usually have frontal wedge deformities. However, the plasticity of the deformed vertebrae in skeletally immature patients is unknown. The purpose of our study was to clarify the plasticity of vertebral deformities in skeletally immature patients with AIS by using in vivo three-dimensional (3D) analysis. Ten female patients with AIS (mean age, 12.2 years; three patients, Lenke type 1; five patients, type 2; two patients, type 5) who underwent posterior fusion and whose Risser grade was ≤3 at surgery were included. Using computed tomography images (0.625-mm slice thickness) obtained 1 week and 1 year postoperatively, a total of seventy-three 3D bone models of vertebrae was made. The 3D bone models were made between the upper and lower end vertebrae within the main thoracic curve for patients with Lenke types 1 and 2 scoliosis, whereas they were made within the thoracolumbar/lumbar curve in patients with Lenke type 5 scoliosis. The height of the concave and convex sides in the anterior, middle and posterior parts of the vertebral bodies was measured using the original digital viewer, and the vertebral height ratio (VHR: concave/convex) was calculated. VHRs at 1 week and 1 year postoperatively were compared using the Wilcoxson signed-rank test. Differences were considered statistically significant at p < 0.05. VHR of the end vertebrae (n = 20) did not change postoperatively for any parts of the vertebral bodies. VHR of the vertebrae in the apical region (n = 28) also remained unchanged postoperatively. In contrast, VHR of the other vertebrae (n = 25) increased significantly in the anterior part postoperatively (from 0.938 to 0.961, p = 0.006). The wedge deformity of vertebral bodies showed a reshaping potential towards a symmetrical configuration in the region other than end and apex, although no plasticity of the vertebrae was observed in the apical region even in skeletally immature patients with AIS.
- 16 December 2015
- Published by Springer Nature
- p. 295-305
Primary and Revision Total Ankle Arthroplasty in Japan
- 16 December 2015
- Published by Springer Nature
- p. 295-305
Primary and Revision Total Ankle Arthroplasty in Japan
- 1 June 2014
- Published by Elsevier in Journal of Shoulder and Elbow Surgery
- Vol. 23 (6) , 888-894
Effect of Bankart repair on the loss of range of motion and the instability of the shoulder joint for recurrent anterior shoulder dislocation
- 1 June 2014
- Published by Elsevier in Journal of Shoulder and Elbow Surgery
- Vol. 23 (6) , 888-894
Effect of Bankart repair on the loss of range of motion and the instability of the shoulder joint for recurrent anterior shoulder dislocation
- 26 December 2012
- Published by Wolters Kluwer Health in JBJS Essential Surgical Techniques
- Vol. 2 (4) , e24
Three-Dimensional Corrective Osteotomy for Malunited Diaphyseal Forearm Fractures Using Custom-Made Surgical Guides Based on Computer Simulation
Three-dimensional corrective osteotomy with use of custom-made surgical guides based on computer simulation can provide a good outcome for patients with a malunited diaphyseal forearm fracture. Obtain CT data of both forearms, and create computer models of the bones from CT data. Evaluate the 3D deformity by comparing the affected bone with the mirror image of the contralateral, normal bone. Simulate the 3D corrective osteotomy on the basis of information obtained from the deformity evaluation. Design custom-made surgical guides to reproduce the preoperative simulation during the actual surgery. Manufacture custom-made surgical guides to reproduce the preoperative simulation during the actual surgery. Perform the osteotomy using the custom-made osteotomy guides and achieve anatomical correction using the reduction guides. In our series of twenty patients, the average radiographic deformity angle preoperatively was 21° (range, 12° to 35°) compared with that of the normal arm; this improved to 1° (range, 0° to 4°) postoperatively. IndicationsContraindicationsPitfalls & Challenges.
- 26 December 2012
- Published by Wolters Kluwer Health in JBJS Essential Surgical Techniques
- Vol. 2 (4) , e24
Three-Dimensional Corrective Osteotomy for Malunited Diaphyseal Forearm Fractures Using Custom-Made Surgical Guides Based on Computer Simulation
Three-dimensional corrective osteotomy with use of custom-made surgical guides based on computer simulation can provide a good outcome for patients with a malunited diaphyseal forearm fracture. Obtain CT data of both forearms, and create computer models of the bones from CT data. Evaluate the 3D deformity by comparing the affected bone with the mirror image of the contralateral, normal bone. Simulate the 3D corrective osteotomy on the basis of information obtained from the deformity evaluation. Design custom-made surgical guides to reproduce the preoperative simulation during the actual surgery. Manufacture custom-made surgical guides to reproduce the preoperative simulation during the actual surgery. Perform the osteotomy using the custom-made osteotomy guides and achieve anatomical correction using the reduction guides. In our series of twenty patients, the average radiographic deformity angle preoperatively was 21° (range, 12° to 35°) compared with that of the normal arm; this improved to 1° (range, 0° to 4°) postoperatively. IndicationsContraindicationsPitfalls & Challenges.