LGLotfi Grine

Lotfi Grine

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lotfi Grine has a total of 1 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Prediction of Leak Rates Through Porous Gaskets at High Temperature

    by Lotfi Grine, Abdel-Hakim Bouzid

    The ability of a gasket to maintain tightness under different operating conditions has been studied extensively in recent years. However, most of the research studies conducted on leakage predictions was performed at room temperature. The aim of this work is to predict leakage through gaskets taking into account the effect of the temperature on the fluid properties and gasket internal structural characteristics. The analytical model of slip flow regime to evaluate the mass leak rates through a porous gasket developed by Grine and Bouzid (2011, “Correlation of Gaseous Mass Leak Rates Through Micro and Nano-Porous Gaskets,” ASME J. Pressure Vessel Technol.) was used in this study. The results from the model were validated and compared with the experimental data obtained from tests conducted on the Universal Gasket Rig with two different gases (helium and nitrogen). The leak rates measured are in the range of 1 to 0.0001 mg/s, which are measurable using the pressure rise technique. As a second objective, the influence of the gasket displacements caused by stress and temperature on the flow leakage was studied. A relationship between displacement or void thickness and leakage is clearly demonstrated. The slip flow regime model is capable of predicting leakage at temperature with reasonable accuracy.


  • Liquid Leak Predictions in Micro- and Nanoporous Gaskets

    by Lotfi Grine, Abdel-Hakim Bouzid

    In recent years, quite few experimental and theoretical studies have been conducted to predict gas leak rate through gaskets. However, a very limited work is done on liquid leak rates through gaskets. The slip flow model is used to predict liquid flow through porous gaskets based on measurements of gas flow at different pressures. In fact, an extrapolation of the porosity parameter approach (Grine, L., and Bouzid, A., 2009, “Correlation of Gaseous Mass Leak Rates Through Micro and Nano-Porous Gaskets,” ASME Paper No. PVP2009-77205) used to correlate leak rates between different gases is used to predict liquid leak rates. In the present article, an analytical-computational methodology based on the number and pore size to predict liquid micro- and nanoflows in the slip flow regime through gaskets is presented. The formulation is based on the Navier–Stokes equations associated with slip boundary condition at the wall. The mass leak rates through a gasket considered as a porous media under various experimental conditions of fluid media, pressure, and gasket stress were conducted on a special gasket test rig. Gaseous and liquid leaks are measured and comparisons with the analytical predictions are made.


  • Correlation of Gaseous Mass Leak Rates Through Micro- and Nanoporous Gaskets

    by Lotfi Grine, Abdel-Hakim Bouzid

    The present work deals with the theoretical and experimental studies of gaseous flow through tight gaskets. The paper presents an innovative approach to accurately predict and correlate leak rates of several gases through nanoporous gaskets. The new approach is based on the calculation of the gasket porosity parameters (D and N) using a model based on a first order slip flow regime. The model assumes the flow to be continuum but employs a slip boundary condition on the leak path wall. Experimental measured gas flow rates were performed on gaskets with a microscopic flow rate range and isothermal steady conditions. The flow rate is accurately measured using multigas mass spectrometers. The gasket porosity parameters used in the developed leakage rate formula were experimentally obtained for a reference gas (helium) for each stress level. In the presence of the statistical properties of a porous gasket, the leak rates for different gases can be predicted with reasonable accuracy. It was found that the approach that considers the slip flow with the first order combined to the molecular flow covers the prediction of flow rates at the microscopy level and down to 10−8 mg/s very well. Tightness hardening is the result of the saturation of the gasket combined porosity parameters or the equivalent thickness of the void layer.