Hui-Wen Cheng
Research Subjects
Hui-Wen Cheng has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
Yiming Li
Department of Electrical Engineering, National Chiao Tung University, Hsinchu 300, Taiwan
5 shared publications- Chih-Hong Hwang
National Chiao Tung University
1 shared publication - Edward Yi Chang
Department of Materials Science and Engineering National Yang Ming Chiao Tung University Hsinchu 300 Taiwan
1 shared publication - Fu-Liang Yang
Research Center for Applied Sciences, Academia Sinica, Taipei City, Taiwan, ROC.
1 shared publication - Hsuan-Ming Huang
National Chiao Tung University
1 shared publication - Hung-Ming Chen
Taiwan Semiconductor Manufacturing Company
1 shared publication
Latest Publications
- Open Access
- 23 March 2012
- Published by Springer Nature in Discover Nano
- Vol. 7 (1) , 196
3D simulation of morphological effect on reflectance of Si3N4 sub-wavelength structures for silicon solar cells
In this study, we investigate the reflectance property of the cylinder, right circular cone, and square pyramid shapes of silicon nitride (Si3N4) subwavelength structure (SWS) with respect to different designing parameters. In terms of three critical factors, the reflectance for physical characteristics of wavelength dependence, the reflected power density for real power reflection applied on solar cell, and the normalized reflectance (reflected power density/incident power density) for real reflectance applied on solar cell, a full three-dimensional finite element simulation is performed and discussed for the aforementioned three morphologies. The result of this study shows that the pyramid shape of SWS possesses the best reflectance property in the optical region from 400 to 1000 nm which is useful for silicon solar cell applications.
- 23 March 2012
- Published by Springer Nature in Discover Nano
- Vol. 7 (1) , 196
Open Access3D simulation of morphological effect on reflectance of Si3N4 sub-wavelength structures for silicon solar cells
In this study, we investigate the reflectance property of the cylinder, right circular cone, and square pyramid shapes of silicon nitride (Si3N4) subwavelength structure (SWS) with respect to different designing parameters. In terms of three critical factors, the reflectance for physical characteristics of wavelength dependence, the reflected power density for real power reflection applied on solar cell, and the normalized reflectance (reflected power density/incident power density) for real reflectance applied on solar cell, a full three-dimensional finite element simulation is performed and discussed for the aforementioned three morphologies. The result of this study shows that the pyramid shape of SWS possesses the best reflectance property in the optical region from 400 to 1000 nm which is useful for silicon solar cell applications.
- 1 June 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
3D finite element simulation of morphological effect on reflectance of Si3N4 sub-wavelength structures for silicon solar cells
In this work, three-dimensional (3D) study on the reflectance spectrum of silicon nitride (Si3N4) sub-wavelength structure (SWS) is conducted using finite element analysis. With proper boundary conditions, the morphological effect on reflectance property of cylinder-, right circular cone, and square pyramid-shape Si 3 N 4 SWS is discussed.
- 1 June 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
3D finite element simulation of morphological effect on reflectance of Si3N4 sub-wavelength structures for silicon solar cells
In this work, three-dimensional (3D) study on the reflectance spectrum of silicon nitride (Si3N4) sub-wavelength structure (SWS) is conducted using finite element analysis. With proper boundary conditions, the morphological effect on reflectance property of cylinder-, right circular cone, and square pyramid-shape Si 3 N 4 SWS is discussed.
- 1 April 2011
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 50 (4) , 04DC22
Nanosized-Metal-Grain-Induced Characteristic Fluctuation in 16 nm Complementary Metal–Oxide–Semiconductor Devices and Digital Circuits
In this work, we investigate the effect of random work functions (WKs) resulting from the nanosized grains of a metal gate on 16 nm metal–oxide–semiconductor field-effect transistor (MOSFET) devices and circuits. The random number and position of nanosized metal grains induce rather different random WKs on a MOSFET gate, which cannot be modeled using an averaged WK; thus, we consider each WK of the metal gate, according to the size of partitioned grains, in three-dimensional device simulation. The results of this study indicate that the random-WK-induced threshold voltage fluctuation of N- and P-MOSFETs are about 1.5 and 1.6 times higher than the results calculated by the recently reported averaged WK fluctuation method. This is because even if the devices have similar threshold voltages, they may exhibit quite different combinations of WKs owing to the random position of nanosized metal grains on the devices' gate. Coupled device-circuit simulation is further adopted to explore the timing fluctuations of complementary metal–oxide–semiconductor (CMOS) inverter circuits. The random position of nanosized metal grains results in 10 and 12% variations in the timing fluctuation and power consumption of the CMOS inverter circuit.
- 1 April 2011
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 50 (4) , 04DC22
Nanosized-Metal-Grain-Induced Characteristic Fluctuation in 16 nm Complementary Metal–Oxide–Semiconductor Devices and Digital Circuits
In this work, we investigate the effect of random work functions (WKs) resulting from the nanosized grains of a metal gate on 16 nm metal–oxide–semiconductor field-effect transistor (MOSFET) devices and circuits. The random number and position of nanosized metal grains induce rather different random WKs on a MOSFET gate, which cannot be modeled using an averaged WK; thus, we consider each WK of the metal gate, according to the size of partitioned grains, in three-dimensional device simulation. The results of this study indicate that the random-WK-induced threshold voltage fluctuation of N- and P-MOSFETs are about 1.5 and 1.6 times higher than the results calculated by the recently reported averaged WK fluctuation method. This is because even if the devices have similar threshold voltages, they may exhibit quite different combinations of WKs owing to the random position of nanosized metal grains on the devices' gate. Coupled device-circuit simulation is further adopted to explore the timing fluctuations of complementary metal–oxide–semiconductor (CMOS) inverter circuits. The random position of nanosized metal grains results in 10 and 12% variations in the timing fluctuation and power consumption of the CMOS inverter circuit.
- 1 May 2010
- Published by Elsevier in Microelectronics Reliability
- Vol. 50 (5) , 699-703
Optimization on configuration of surface conduction electron-emitters
- 1 May 2010
- Published by Elsevier in Microelectronics Reliability
- Vol. 50 (5) , 699-703
Optimization on configuration of surface conduction electron-emitters
- 27 October 2009
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 24 (11)
Electrical characteristics dependence on the channel fin aspect ratio of multi-fin field effect transistors
- 27 October 2009
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 24 (11)
Electrical characteristics dependence on the channel fin aspect ratio of multi-fin field effect transistors
- 10 June 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 8 (6) , 671-677
Optimal Configuration of Hydrogen-Embrittlement-Fabricated Nanogaps for Surface-Conduction Electron-Emitter Display
Application of nanogaps for electron sources is fascinating in surface-conduction electron-emitter display. In contrast to rather complicated fabrication processes of the focused ion beam technique for the extremely narrow fissure, nanogaps fabricated by hydrogen embrittlement (HE) have thus been proposed as novel surface-conduction electron emitters due to their low turn-on voltage, high emission current, high focus capability, and high emission efficiency. In this paper, we theoretically investigate effects of the separation width and the tilted angle of the nanogaps fabricated by HE method on the field emission efficiency using a 3-D finite-difference time-domain particle-in-cell simulation technique. The structure with a large tilted angle may result in a high emitted current, but the collected current on the anode is suppressed due to the strong local field around the tip. A small structure prevents the emitted electrons from spreading out, and thus, no current could be collected by the anode. Also, the structure with a wide (or a narrow) separation of gap weakens (or enhances) the field around the tip and reduces the collected electrons. For better emission efficiency and focus capability, the separation width and the tilted angle of the examined structure could vary from 57 to 117 nm and 30deg to 60deg, respectively.
- 10 June 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 8 (6) , 671-677
Optimal Configuration of Hydrogen-Embrittlement-Fabricated Nanogaps for Surface-Conduction Electron-Emitter Display
Application of nanogaps for electron sources is fascinating in surface-conduction electron-emitter display. In contrast to rather complicated fabrication processes of the focused ion beam technique for the extremely narrow fissure, nanogaps fabricated by hydrogen embrittlement (HE) have thus been proposed as novel surface-conduction electron emitters due to their low turn-on voltage, high emission current, high focus capability, and high emission efficiency. In this paper, we theoretically investigate effects of the separation width and the tilted angle of the nanogaps fabricated by HE method on the field emission efficiency using a 3-D finite-difference time-domain particle-in-cell simulation technique. The structure with a large tilted angle may result in a high emitted current, but the collected current on the anode is suppressed due to the strong local field around the tip. A small structure prevents the emitted electrons from spreading out, and thus, no current could be collected by the anode. Also, the structure with a wide (or a narrow) separation of gap weakens (or enhances) the field around the tip and reduces the collected electrons. For better emission efficiency and focus capability, the separation width and the tilted angle of the examined structure could vary from 57 to 117 nm and 30deg to 60deg, respectively.
- 17 November 2007
- Published by Springer Nature
- p. 365-368
Characteristic Fluctuation Dependence on Discrete Dopant for 16nm SOI FinFETs at Different Temperature
- 17 November 2007
- Published by Springer Nature
- p. 365-368
Characteristic Fluctuation Dependence on Discrete Dopant for 16nm SOI FinFETs at Different Temperature