Qinghai Song
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qinghai Song has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
Zhiyuan Gu
State Key Laboratory on Tunable laser Technology Ministry of Industry and Information Technology Key Lab of Micro‐Nano Optoelectronic Information System Shenzhen Graduate School Harbin Institute of Technology Shenzhen 518055 China
30 shared publications- Shumin Xiao
State Key Laboratory on Tunable laser Technology Ministry of Industry and Information Technology Key Lab of Micro‐Nano Optoelectronic Information System Shenzhen Graduate School Harbin Institute of Technology Shenzhen 518055 China
25 shared publications Kaiyang Wang
State Key Laboratory on Tunable laser Technology, Ministry of Industry and Information Technology Key Lab of Micro-Nano Optoelectronic Information System, Shenzhen Graduate School, Harbin Institute of Technology, Shenzhen, 518055, China
22 shared publicationsShuai Liu
State Key Laboratory on Tunable laser Technology Ministry of Industry and Information Technology Key Lab of Micro‐Nano Optoelectronic Information System Shenzhen Graduate School Harbin Institute of Technology Shenzhen 518055 China
21 shared publicationsWenzhao Sun
State Key Laboratory on Tunable laser Technology Ministry of Industry and Information Technology Key Lab of Micro‐Nano Optoelectronic Information System Shenzhen Graduate School Harbin Institute of Technology Shenzhen 518055 China
21 shared publications- Nan Zhang
MOE Key Laboratory for Nonequilibrium Synthesis and Modulation of Condensed Matter, School of Physics, National Innovation Platform (Center) for Industry-Education Integration of Energy Storage Technology, Xi’an Jiaotong University, Xi’an, P. R. China
17 shared publications
Latest Publications
- 21 August 2017
- Published by Wiley in Advanced Optical Materials
- Vol. 5 (20)
Enhancing the Magnetic Resonance via Strong Coupling in Optical Metamaterials
Due to the lack of symmetry between electric and magnetic charges, the magnetic effect in optical materials is usually very weak. Recently, Fano type magnetic resonances have been proposed and experimentally realized by packaging the metallic nanoparticles into metamolecules. However, the corresponding experiments are hard to be realized and the enhancements of magnetic fields are relatively low. Here, a simple way is demonstrated experimentally to generate magnetic plasmon polaritons (MPPs) in optical metamaterials. By changing the period of the nanostructures, strong coupling between the magnetic resonance and the propagating surface plasmon polaritons (SPPs) with a Rabi‐splitting around 190 meV has also been observed. Interestingly, the hybrid modes around the avoided resonance crossing points are found to be mixtures of MPPs and SPPs. Consequently, the typical long‐lived SPPs are also well localized within the dielectric spacer layer and give an enhancement in magnetic field around 500 times. In addition, the dependence of MPPs has also been observed on the refractive index with a sensitivity around 470 nm RIU−1, which is very close to the typical reports of electric resonances in plasmonic nanostructures. This research shall pave a new way to the developments of magnetic light sources and magnetic sensing.
- 21 August 2017
- Published by Wiley in Advanced Optical Materials
- Vol. 5 (20)
Enhancing the Magnetic Resonance via Strong Coupling in Optical Metamaterials
Due to the lack of symmetry between electric and magnetic charges, the magnetic effect in optical materials is usually very weak. Recently, Fano type magnetic resonances have been proposed and experimentally realized by packaging the metallic nanoparticles into metamolecules. However, the corresponding experiments are hard to be realized and the enhancements of magnetic fields are relatively low. Here, a simple way is demonstrated experimentally to generate magnetic plasmon polaritons (MPPs) in optical metamaterials. By changing the period of the nanostructures, strong coupling between the magnetic resonance and the propagating surface plasmon polaritons (SPPs) with a Rabi‐splitting around 190 meV has also been observed. Interestingly, the hybrid modes around the avoided resonance crossing points are found to be mixtures of MPPs and SPPs. Consequently, the typical long‐lived SPPs are also well localized within the dielectric spacer layer and give an enhancement in magnetic field around 500 times. In addition, the dependence of MPPs has also been observed on the refractive index with a sensitivity around 470 nm RIU−1, which is very close to the typical reports of electric resonances in plasmonic nanostructures. This research shall pave a new way to the developments of magnetic light sources and magnetic sensing.
- 18 April 2017
- Published by Wiley in Advanced Materials Technologies
- Vol. 2 (6)
Chip‐Scale Mass Manufacturable High‐Q Silicon Microdisks
High‐Q silicon microdisks are fundamental building blocks for on‐chip photonic systems and have been well developed in past decades. However, the practical applications of high‐Q silicon microdisks are facing a dilemma. The high‐Q silicon microdisks are realized with electron‐beam lithography and are hard to be massively fabricated. The standard photolithography usually generates microdisks with rough surfaces and cannot produce high Q resonators. This study addresses this challenge and reports a novel approach to fabricate chip‐scale high‐Q silicon microdisks with standard photolithography and an isotropic etching. While standard photolithography generates microscale roughness on the cavity boundary, these experimental results show that the following isotropic etching process can effectively smooth them. The ultimate surface roughness is even comparable to the microdisks that are fabricated with E‐beam lithography. Consequently, the cavity Q factors are dramatically improved from a few thousand to more than a million. Compared with the conventional approach, this new technique is particularly intriguing. It can produce chip‐scale high‐Q silicon microdisks simultaneously for the first time. This research is a key step for mass fabrication of high‐Q silicon microdisks, and it can boost the advances of silicon microdisks in a number of important applications, such as optical sensing, quantum optics, and integrated optical elements.
- 18 April 2017
- Published by Wiley in Advanced Materials Technologies
- Vol. 2 (6)
Chip‐Scale Mass Manufacturable High‐Q Silicon Microdisks
High‐Q silicon microdisks are fundamental building blocks for on‐chip photonic systems and have been well developed in past decades. However, the practical applications of high‐Q silicon microdisks are facing a dilemma. The high‐Q silicon microdisks are realized with electron‐beam lithography and are hard to be massively fabricated. The standard photolithography usually generates microdisks with rough surfaces and cannot produce high Q resonators. This study addresses this challenge and reports a novel approach to fabricate chip‐scale high‐Q silicon microdisks with standard photolithography and an isotropic etching. While standard photolithography generates microscale roughness on the cavity boundary, these experimental results show that the following isotropic etching process can effectively smooth them. The ultimate surface roughness is even comparable to the microdisks that are fabricated with E‐beam lithography. Consequently, the cavity Q factors are dramatically improved from a few thousand to more than a million. Compared with the conventional approach, this new technique is particularly intriguing. It can produce chip‐scale high‐Q silicon microdisks simultaneously for the first time. This research is a key step for mass fabrication of high‐Q silicon microdisks, and it can boost the advances of silicon microdisks in a number of important applications, such as optical sensing, quantum optics, and integrated optical elements.
- 13 April 2017
- Published by Wiley in Advanced Optical Materials
- Vol. 5 (11)
Solution‐Phase Synthesis of Cesium Lead Halide Perovskite Microrods for High‐Quality Microlasers and Photodetectors
Recently, due to broad wavelength tunability and high material stability, cesium lead halide perovskite nanorods have been intensively studied as potential candidates for microlasers and photodetectors. However, the current CsPbX3 perovskite nanorods can only support low quality (Q) Fabry–Perot lasers and the response time of CsPbX3 nanorod photodetector is extremely long. Here, CsPbBr3 microrods with larger cross‐sectional sizes and almost uniform aspect ratio are successfully synthesized with a solution processed one‐step precipitation method and their applications in microlasers and photodetectors are reported. Due to the larger cross‐sectional size, whispering‐gallery‐mode lasers can be formed in the transverse plane of CsPbBr3 microrod under both of one‐photon and two‐photon excitation. The highest Q factor can reach around 7000. Besides, the synthesized CsPbBr3 perovskite lasers have shown much better photostability and thermal stability. The single‐crystalline CsPbBr3 microrods also provide a stable platform for photodetectors. The rise and decay time of CsPbBr3 microrod based photodetectors are around 8 ms, which are almost two orders of magnitude smaller than the previously reported CsPbX3 microrod photodetector. Such findings can pave new route on all‐inorganic CsPbX3 based optoelectronic devices.
- 13 April 2017
- Published by Wiley in Advanced Optical Materials
- Vol. 5 (11)
Solution‐Phase Synthesis of Cesium Lead Halide Perovskite Microrods for High‐Quality Microlasers and Photodetectors
Recently, due to broad wavelength tunability and high material stability, cesium lead halide perovskite nanorods have been intensively studied as potential candidates for microlasers and photodetectors. However, the current CsPbX3 perovskite nanorods can only support low quality (Q) Fabry–Perot lasers and the response time of CsPbX3 nanorod photodetector is extremely long. Here, CsPbBr3 microrods with larger cross‐sectional sizes and almost uniform aspect ratio are successfully synthesized with a solution processed one‐step precipitation method and their applications in microlasers and photodetectors are reported. Due to the larger cross‐sectional size, whispering‐gallery‐mode lasers can be formed in the transverse plane of CsPbBr3 microrod under both of one‐photon and two‐photon excitation. The highest Q factor can reach around 7000. Besides, the synthesized CsPbBr3 perovskite lasers have shown much better photostability and thermal stability. The single‐crystalline CsPbBr3 microrods also provide a stable platform for photodetectors. The rise and decay time of CsPbBr3 microrod based photodetectors are around 8 ms, which are almost two orders of magnitude smaller than the previously reported CsPbX3 microrod photodetector. Such findings can pave new route on all‐inorganic CsPbX3 based optoelectronic devices.
- Open Access
- 28 March 2017
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , 45391
Room temperature three-photon pumped CH3NH3PbBr3 perovskite microlasers
Hybrid lead halide perovskites have made great strides in next-generation light-harvesting and light emitting devices. Recently, they have also shown great potentials in nonlinear optical materials. Two-photon absorption and two-photon light emission have been thoroughly studied in past two years. However, the three-photon processes are rarely explored, especially for the laser emissions. Here we synthesized high quality CH3NH3PbBr3 perovskite microstructures with solution processed precipitation method and studied their optical properties. When the microstructures are pumped with intense 1240 nm lasers, we have observed clear optical limit effect and the band-to-band photoluminescence at 540 nm. By increasing the pumping density, whispering-gallery-mode based microlasers have been achieved from CH3NH3PbBr3 perovskite microplate and microrod for the first time. This work demonstrates the potentials of hybrid lead halide perovskites in nonlinear photonic devices.
- 28 March 2017
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , 45391
Open AccessRoom temperature three-photon pumped CH3NH3PbBr3 perovskite microlasers
Hybrid lead halide perovskites have made great strides in next-generation light-harvesting and light emitting devices. Recently, they have also shown great potentials in nonlinear optical materials. Two-photon absorption and two-photon light emission have been thoroughly studied in past two years. However, the three-photon processes are rarely explored, especially for the laser emissions. Here we synthesized high quality CH3NH3PbBr3 perovskite microstructures with solution processed precipitation method and studied their optical properties. When the microstructures are pumped with intense 1240 nm lasers, we have observed clear optical limit effect and the band-to-band photoluminescence at 540 nm. By increasing the pumping density, whispering-gallery-mode based microlasers have been achieved from CH3NH3PbBr3 perovskite microplate and microrod for the first time. This work demonstrates the potentials of hybrid lead halide perovskites in nonlinear photonic devices.
- 15 February 2017
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 4 (3) , 649-656
Lead Halide Perovskite Nanoribbon Based Uniform Nanolaser Array on Plasmonic Grating
- 15 February 2017
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 4 (3) , 649-656
Lead Halide Perovskite Nanoribbon Based Uniform Nanolaser Array on Plasmonic Grating
- 13 February 2017
- Published by Wiley in Advanced Materials
- Vol. 29 (15)
Highly Reproducible Organometallic Halide Perovskite Microdevices based on Top‐Down Lithography
Highly reproducible organometallic-halide-perovskite-based devices are fabricated by a manufacturing process, which is demonstrated. Various shapes that are hard to synthesize directly are fabricated, and many unique properties are achieved.The fabrication procedure is utilized to create a photodetector and the detection sensitivity is significantly improved. The results will bring revolutionary advancement to the future of lead-halide-perovskite-based optoelectronic devices.
- 13 February 2017
- Published by Wiley in Advanced Materials
- Vol. 29 (15)
Highly Reproducible Organometallic Halide Perovskite Microdevices based on Top‐Down Lithography
Highly reproducible organometallic-halide-perovskite-based devices are fabricated by a manufacturing process, which is demonstrated. Various shapes that are hard to synthesize directly are fabricated, and many unique properties are achieved.The fabrication procedure is utilized to create a photodetector and the detection sensitivity is significantly improved. The results will bring revolutionary advancement to the future of lead-halide-perovskite-based optoelectronic devices.
- 1 January 2017
- Published by Optica Publishing Group
- No. 15,p. AM1B.3
Highly Reproducible- Organometallic Halide Perovskite Microdevices Based on Top-Down Lithography
Herein we fabricate highly reproducible-organometallic-halide-perovskite based devices, various device shapes that are hard to directly synthesize, unique properties and an improved photodetector have been successfully achieved. The advances will shed light on the practical applications.
- 1 January 2017
- Published by Optica Publishing Group
- No. 15,p. AM1B.3
Highly Reproducible- Organometallic Halide Perovskite Microdevices Based on Top-Down Lithography
Herein we fabricate highly reproducible-organometallic-halide-perovskite based devices, various device shapes that are hard to directly synthesize, unique properties and an improved photodetector have been successfully achieved. The advances will shed light on the practical applications.
- 19 December 2016
- Published by Wiley in Advanced Optical Materials
- Vol. 5 (3)
Single Crystal Microrod Based Homonuclear Photonic Molecule Lasers
Homonuclear photonic molecules are essential platforms to tailor and manipulate light in micro‐ and nanoscales. While photonic molecule microlasers have been widely explored in the past two decades, the unavoidable fabrication deviations make their resonant units hard to be identical and, thus, the corresponding practical applications are hindered by the experimental realization. Herein, the authors experimentally demonstrate a novel and effective approach to achieve homonuclear photonic molecule lasers with the synthesized single crystalline CH3NH3PbBr3 perovskite microwires. A single crystalline microwire is cut into two segments that are placed shoulder by shoulder in proximity. Due to their naturally flat facets and uniformity, the transverse whispering‐gallery‐mode lasers in two parts are almost the same and can naturally couple each other via evanescent waves. Consequently, bonding and antibonding modes are successfully achieved in many similar systems without applying any external controls. All of these experimental observations are consistent with the photonic molecule theory and are confirmed with numerical calculations. This research can be applied to all bottom‐up synthesized microwires and, thus, will open a new avenue of bottom‐up synthesized microrods to quantum optics and photonic circuits.
- 19 December 2016
- Published by Wiley in Advanced Optical Materials
- Vol. 5 (3)
Single Crystal Microrod Based Homonuclear Photonic Molecule Lasers
Homonuclear photonic molecules are essential platforms to tailor and manipulate light in micro‐ and nanoscales. While photonic molecule microlasers have been widely explored in the past two decades, the unavoidable fabrication deviations make their resonant units hard to be identical and, thus, the corresponding practical applications are hindered by the experimental realization. Herein, the authors experimentally demonstrate a novel and effective approach to achieve homonuclear photonic molecule lasers with the synthesized single crystalline CH3NH3PbBr3 perovskite microwires. A single crystalline microwire is cut into two segments that are placed shoulder by shoulder in proximity. Due to their naturally flat facets and uniformity, the transverse whispering‐gallery‐mode lasers in two parts are almost the same and can naturally couple each other via evanescent waves. Consequently, bonding and antibonding modes are successfully achieved in many similar systems without applying any external controls. All of these experimental observations are consistent with the photonic molecule theory and are confirmed with numerical calculations. This research can be applied to all bottom‐up synthesized microwires and, thus, will open a new avenue of bottom‐up synthesized microrods to quantum optics and photonic circuits.
- Open Access
- 13 December 2016
- Published by Springer Nature in Scientific Reports
- Vol. 6 (1) , 38964
Coupling the normal incident light into waveguide modes of DBR mirrors via a diffraction grating
Here we numerically and experimentally demonstrate the conversion of normally incident light into the guiding modes of distributed Bragg reflector (DBRs) mirror. By fabricating a gold grating onto a 7.5 pairs TiO2/SiO2 DBR mirror, a series of asymmetrical resonances have been formed at the bandgap range of the DBR mirror. The detailed numerical calculations show that these Fano resonances are attributed to the coupling of incident waves into guiding modes of the DBR mirror. Compared with the other resonances, this coupling mechanism can be simply realized and it has also been revealed to be quite robust to the environmental changes, making the conversion between propagating waves and guiding waves to be practically interesting for many applications.
- 13 December 2016
- Published by Springer Nature in Scientific Reports
- Vol. 6 (1) , 38964
Open AccessCoupling the normal incident light into waveguide modes of DBR mirrors via a diffraction grating
Here we numerically and experimentally demonstrate the conversion of normally incident light into the guiding modes of distributed Bragg reflector (DBRs) mirror. By fabricating a gold grating onto a 7.5 pairs TiO2/SiO2 DBR mirror, a series of asymmetrical resonances have been formed at the bandgap range of the DBR mirror. The detailed numerical calculations show that these Fano resonances are attributed to the coupling of incident waves into guiding modes of the DBR mirror. Compared with the other resonances, this coupling mechanism can be simply realized and it has also been revealed to be quite robust to the environmental changes, making the conversion between propagating waves and guiding waves to be practically interesting for many applications.
- 30 September 2016
- Published by Wiley in Advanced Materials
- Vol. 28 (46) , 10165-10169
The Role of Excitons on Light Amplification in Lead Halide Perovskites
The role of excitons on the amplifications of lead halide perovskites has been explored. Unlike the photoluminescence, the intensity of amplified spontaneous emission is partially suppressed at low temperature. The detailed analysis and experiments show that the inhibition is attributed to the existence of exciton and a quantitative model has been built to explain the experimental observations.
- 30 September 2016
- Published by Wiley in Advanced Materials
- Vol. 28 (46) , 10165-10169
The Role of Excitons on Light Amplification in Lead Halide Perovskites
The role of excitons on the amplifications of lead halide perovskites has been explored. Unlike the photoluminescence, the intensity of amplified spontaneous emission is partially suppressed at low temperature. The detailed analysis and experiments show that the inhibition is attributed to the existence of exciton and a quantitative model has been built to explain the experimental observations.