Jianwei Lu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Interests
Jianwei Lu has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
Ping Jiang
Hefei University of Technology
8 shared publicationsBofu Wu
School of Automotive and Transportation Engineering, Hefei University of Technology, Anhui, China
5 shared publicationsLei Shi
School of Automotive and Transportation Engineering, Hefei University of Technology, Hefei, China
5 shared publicationsYingjie Zhu
School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China
5 shared publicationsHeng Wei
School of Automotive and Transportation Engineering, Hefei University of Technology, Hefei, China
4 shared publications- Jialin Li
School of Automotive and Transportation Engineering, Hefei University of Technology, Hefei, China
4 shared publications
Latest Publications
- 30 September 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Loosening mechanisms and preload prediction of chassis threaded fasteners under transient loads
The operational reliability of automotive systems relies heavily on the structural integrity of chassis threaded fasteners. However, under dynamic road impacts, these fasteners frequently experience severe preload loss, leading to joint failures and structural degradation. This paper proposes a systematic framework to predict fastener loosening under vehicular conditions. First, analytical boundaries for frictional slip and localized plastic yielding are established. Next, a detailed finite element analysis (FEA) is conducted to uncover the loosening mechanisms. Results show that under a 1 g axial transient impact, stress concentrations propagate from the first to the second and third engaged threads within 8 ms. Furthermore, single transverse impacts induce a relative residual nut rotation of up to 15 mrad, triggering a combined degradation mode of rotational slip and cumulative plastic deformation. Based on these mechanisms, a nonlinear dynamic model is developed. This model directly links external accelerations to internal energy dissipation, enabling the cycle by cycle prediction of the residual clamping force. Finally, the framework is applied to a representative M12 Grade 8.8 chassis assembly using 1600 s measured road spectra cycles from the Dingyuan proving ground. The engineering evaluation reveals a strict tradeoff effect regarding the initial preload: while excessively high preloads suppress macroscopic slip, they exacerbate root plasticity, causing the clamping force to drop by over 20% prematurely. An optimal initial preload of 20 kN is identified, which balances frictional resistance and plastic damage, ensuring the clamping force remains above 80% of its initial value over the 5000 h design life. This study provides a strong theoretical basis and practical guidelines for the anti-loosening design of critical chassis components.
- 30 September 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Loosening mechanisms and preload prediction of chassis threaded fasteners under transient loads
The operational reliability of automotive systems relies heavily on the structural integrity of chassis threaded fasteners. However, under dynamic road impacts, these fasteners frequently experience severe preload loss, leading to joint failures and structural degradation. This paper proposes a systematic framework to predict fastener loosening under vehicular conditions. First, analytical boundaries for frictional slip and localized plastic yielding are established. Next, a detailed finite element analysis (FEA) is conducted to uncover the loosening mechanisms. Results show that under a 1 g axial transient impact, stress concentrations propagate from the first to the second and third engaged threads within 8 ms. Furthermore, single transverse impacts induce a relative residual nut rotation of up to 15 mrad, triggering a combined degradation mode of rotational slip and cumulative plastic deformation. Based on these mechanisms, a nonlinear dynamic model is developed. This model directly links external accelerations to internal energy dissipation, enabling the cycle by cycle prediction of the residual clamping force. Finally, the framework is applied to a representative M12 Grade 8.8 chassis assembly using 1600 s measured road spectra cycles from the Dingyuan proving ground. The engineering evaluation reveals a strict tradeoff effect regarding the initial preload: while excessively high preloads suppress macroscopic slip, they exacerbate root plasticity, causing the clamping force to drop by over 20% prematurely. An optimal initial preload of 20 kN is identified, which balances frictional resistance and plastic damage, ensuring the clamping force remains above 80% of its initial value over the 5000 h design life. This study provides a strong theoretical basis and practical guidelines for the anti-loosening design of critical chassis components.
- 3 August 2026
- Published by Springer Nature in Meccanica
- Vol. 61 (4) , 104
Separating dynamic friction characteristics from the brush tire model considering Stribeck effect
- 3 August 2026
- Published by Springer Nature in Meccanica
- Vol. 61 (4) , 104
Separating dynamic friction characteristics from the brush tire model considering Stribeck effect
- 21 July 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
Preload driven degradation model and life prediction of automotive PEM fuel cell stacks
Bolted joints are critical for maintaining the sealing and internal contact pressure of automotive proton exchange membrane fuel cell (PEMFC) stacks. However, existing durability models typically assume static mechanical boundary conditions, neglecting the dynamic decay of clamping force induced by road excitation and its cascading impact on electrochemical performance. To bridge this gap, this study proposes a novel comprehensive degradation framework that explicitly couples vehicle-level vibration, fastener loosening dynamics, and functional layer damage mechanisms. Unlike traditional approaches, a system-level PEMFC model is integrated with a mixed fastener loosening model accounting for both frictional rotational slip and accumulated plastic deformation under real-world proving ground road spectra. The time-varying clamping force is mapped to the stress evolution within the stack, driving physics-based damage accumulation in the gas diffusion layer (GDL), membrane (PEM), and catalyst layer (CL). Numerical results reveal a non-linear sensitivity of stack life to preload: insufficient preload triggers rapid rotational loosening. In contrast, excessive preload accelerates thread plasticity, creating a mechanistic trade-off that defines a narrow optimal design window. Crucially, the study quantifies that moderate preload loss can lead to significant power capability reduction before any structural failure occurs. This work provides a pioneering quantitative tool for automotive engineers to optimize stack assembly strategies and predict on-board durability by linking chassis vibration directly to electrochemical aging.
- 21 July 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
Preload driven degradation model and life prediction of automotive PEM fuel cell stacks
Bolted joints are critical for maintaining the sealing and internal contact pressure of automotive proton exchange membrane fuel cell (PEMFC) stacks. However, existing durability models typically assume static mechanical boundary conditions, neglecting the dynamic decay of clamping force induced by road excitation and its cascading impact on electrochemical performance. To bridge this gap, this study proposes a novel comprehensive degradation framework that explicitly couples vehicle-level vibration, fastener loosening dynamics, and functional layer damage mechanisms. Unlike traditional approaches, a system-level PEMFC model is integrated with a mixed fastener loosening model accounting for both frictional rotational slip and accumulated plastic deformation under real-world proving ground road spectra. The time-varying clamping force is mapped to the stress evolution within the stack, driving physics-based damage accumulation in the gas diffusion layer (GDL), membrane (PEM), and catalyst layer (CL). Numerical results reveal a non-linear sensitivity of stack life to preload: insufficient preload triggers rapid rotational loosening. In contrast, excessive preload accelerates thread plasticity, creating a mechanistic trade-off that defines a narrow optimal design window. Crucially, the study quantifies that moderate preload loss can lead to significant power capability reduction before any structural failure occurs. This work provides a pioneering quantitative tool for automotive engineers to optimize stack assembly strategies and predict on-board durability by linking chassis vibration directly to electrochemical aging.
- 27 May 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Mechanistic insights into contact fatigue of helical gears under cyclic loading: Impact of center distance error in eccentric load and uniform load scenarios
The fatigue life of helical gear transmission systems is highly sensitive to critical geometric parameters, particularly center distance error (CDE). This study employs a combined approach of theoretical analysis and numerical simulation to systematically investigate the impact of CDE on the fatigue life of helical gears under cyclic operating conditions, along with its causal mechanisms. A rigid-flexible coupling finite element model based on eccentric load (EL) and uniform load (UL) configuration was established to analyze the influence mechanism of CDE on fatigue life. The results show that the life of the gear decreases with the increase of the center distance. The mechanism analysis determines the dynamic impact, bearing capacity, and oil film thickness (OFT) that the CDE affects the fatigue life, and then affects the contact stress. These findings provide important insights for the reliability-driven design and precision installation control of helical gear systems, and are of great significance for optimizing the performance of helical gear transmission systems in applications.
- 27 May 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Mechanistic insights into contact fatigue of helical gears under cyclic loading: Impact of center distance error in eccentric load and uniform load scenarios
The fatigue life of helical gear transmission systems is highly sensitive to critical geometric parameters, particularly center distance error (CDE). This study employs a combined approach of theoretical analysis and numerical simulation to systematically investigate the impact of CDE on the fatigue life of helical gears under cyclic operating conditions, along with its causal mechanisms. A rigid-flexible coupling finite element model based on eccentric load (EL) and uniform load (UL) configuration was established to analyze the influence mechanism of CDE on fatigue life. The results show that the life of the gear decreases with the increase of the center distance. The mechanism analysis determines the dynamic impact, bearing capacity, and oil film thickness (OFT) that the CDE affects the fatigue life, and then affects the contact stress. These findings provide important insights for the reliability-driven design and precision installation control of helical gear systems, and are of great significance for optimizing the performance of helical gear transmission systems in applications.
- 19 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. PP (00189545) , 1-14
State-Feedback Control of Vehicle Lateral Motion Subjected to Hybrid Time-Delays in the Loop: Stability and Gain-Optimization
Vehicle stability control (VSC) plays a central role both in the current traffic safety and in the way toward autonomy. Multiple types of time delays inevitably appear within the control loop affecting the performance and even the stability of the system. These delays can be classified as discrete and continuous ones, which together result in the so-called hybrid delay effect. A vehicle model is introduced with transient and combined tire slip properties to accurately reflect the dynamics and maneuverability of a vehicle negotiating cornering. A semi-discretization (SD) method for the hybrid delay condition is proposed, which presents stability charts in the parameter space of control gains. The charts are validated by means of the analytical delay-averaging (DA) method developed for limited cases of continuous delay. By introducing the decay rate of settling as the optimization goal, the stable domain is further divided into regions characterized by the degrees of robustness against state perturbations. Optimal conditions are analyzed for various delay hybridizations, with results validated through simulations using the mechanical model of a vehicle experimentally identified. Cases with multiple hybrid delays reveal that control performance depends fundamentally on the ratio of hybrid delays rather than on an averaged delay alone. Finally, gain-tuning strategies for different delay hybridizations are presented.
- 19 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. PP (00189545) , 1-14
State-Feedback Control of Vehicle Lateral Motion Subjected to Hybrid Time-Delays in the Loop: Stability and Gain-Optimization
Vehicle stability control (VSC) plays a central role both in the current traffic safety and in the way toward autonomy. Multiple types of time delays inevitably appear within the control loop affecting the performance and even the stability of the system. These delays can be classified as discrete and continuous ones, which together result in the so-called hybrid delay effect. A vehicle model is introduced with transient and combined tire slip properties to accurately reflect the dynamics and maneuverability of a vehicle negotiating cornering. A semi-discretization (SD) method for the hybrid delay condition is proposed, which presents stability charts in the parameter space of control gains. The charts are validated by means of the analytical delay-averaging (DA) method developed for limited cases of continuous delay. By introducing the decay rate of settling as the optimization goal, the stable domain is further divided into regions characterized by the degrees of robustness against state perturbations. Optimal conditions are analyzed for various delay hybridizations, with results validated through simulations using the mechanical model of a vehicle experimentally identified. Cases with multiple hybrid delays reveal that control performance depends fundamentally on the ratio of hybrid delays rather than on an averaged delay alone. Finally, gain-tuning strategies for different delay hybridizations are presented.
- 9 April 2026
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 40 (4) , 2439-2448
Dynamic analysis and suppression strategy of vehicle shimmy system with suspension rubber bushings
- 9 April 2026
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 40 (4) , 2439-2448
Dynamic analysis and suppression strategy of vehicle shimmy system with suspension rubber bushings
- Open Access
- 1 January 2026
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 62 (8) , 60-70
Transient Dynamic Response Characteristics of Tires at μ-step Road Boundaries and Modeling
- 1 January 2026
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 62 (8) , 60-70
Open AccessTransient Dynamic Response Characteristics of Tires at μ-step Road Boundaries and Modeling
- 28 October 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 240 (9) , 6141-6151
Dynamic modeling and behavior analysis of vehicle shimmy system considering the rubber bushing
Vehicle shimmy is a harmful vibration phenomenon that significantly affects vehicle stability and safety. Unlike previous studies that typically neglected the influence of suspension rubber bushings, this paper focuses on the rubber bushing at the connection between the suspension damper and the vehicle body, and systematically investigates its effect on the dynamic response of a vehicle shimmy system. A seven-degree-of-freedom (DOF) shimmy model is first established based on Lagrangian theory. The nonlinear system is then linearized to analyze the stability characteristics under variations in the axial stiffness of the rubber bushing. Furthermore, numerical simulations are conducted to examine the dynamic responses and bifurcation behavior of the nonlinear shimmy system under different parameter conditions. The results reveal that increasing the axial stiffness of the rubber bushing reduces both the unstable speed range and the steady-state shimmy amplitude. In summary, increasing the stiffness of rubber bushings offers a cost-effective and practically viable approach to suppress vehicle shimmy, providing both theoretical insights and practical guidance for the early-stage design and optimization of anti-shimmy strategies.
- 28 October 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 240 (9) , 6141-6151
Dynamic modeling and behavior analysis of vehicle shimmy system considering the rubber bushing
Vehicle shimmy is a harmful vibration phenomenon that significantly affects vehicle stability and safety. Unlike previous studies that typically neglected the influence of suspension rubber bushings, this paper focuses on the rubber bushing at the connection between the suspension damper and the vehicle body, and systematically investigates its effect on the dynamic response of a vehicle shimmy system. A seven-degree-of-freedom (DOF) shimmy model is first established based on Lagrangian theory. The nonlinear system is then linearized to analyze the stability characteristics under variations in the axial stiffness of the rubber bushing. Furthermore, numerical simulations are conducted to examine the dynamic responses and bifurcation behavior of the nonlinear shimmy system under different parameter conditions. The results reveal that increasing the axial stiffness of the rubber bushing reduces both the unstable speed range and the steady-state shimmy amplitude. In summary, increasing the stiffness of rubber bushings offers a cost-effective and practically viable approach to suppress vehicle shimmy, providing both theoretical insights and practical guidance for the early-stage design and optimization of anti-shimmy strategies.
- 28 October 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 240 (9) , 5990-6001
Load spectrum editing for automotive fasteners based on bolt critical load
The durability of threaded fasteners is critical to chassis reliability. Conventional load spectrum editing often retains low-amplitude, high-cycle loads that extend test time without affecting preload. This study introduces an accelerated editing method that integrates the bolt critical load threshold with the S-transform to account for the loosening mechanism of fasteners. Road load data were collected under representative driving conditions, and the proposed method was used to remove non-damaging segments while preserving fatigue-relevant features. Simulation results show that the edited spectrum significantly shortens test duration while maintaining consistency with the original in statistical parameters, spectral distribution, and fatigue damage. The method improves testing efficiency and provides practical value for automotive durability evaluation, product development, and quality assurance.
- 28 October 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 240 (9) , 5990-6001
Load spectrum editing for automotive fasteners based on bolt critical load
The durability of threaded fasteners is critical to chassis reliability. Conventional load spectrum editing often retains low-amplitude, high-cycle loads that extend test time without affecting preload. This study introduces an accelerated editing method that integrates the bolt critical load threshold with the S-transform to account for the loosening mechanism of fasteners. Road load data were collected under representative driving conditions, and the proposed method was used to remove non-damaging segments while preserving fatigue-relevant features. Simulation results show that the edited spectrum significantly shortens test duration while maintaining consistency with the original in statistical parameters, spectral distribution, and fatigue damage. The method improves testing efficiency and provides practical value for automotive durability evaluation, product development, and quality assurance.
- 29 September 2025
- Published by Springer Nature in Journal of Failure Analysis and Prevention
- Vol. 25 (5) , 2399-2414
Critical Load Analysis and Life Prediction of Threaded Fasteners in Automotive Chassis Subjected to Random Vibration
- 29 September 2025
- Published by Springer Nature in Journal of Failure Analysis and Prevention
- Vol. 25 (5) , 2399-2414
Critical Load Analysis and Life Prediction of Threaded Fasteners in Automotive Chassis Subjected to Random Vibration