Can Fang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Can Fang has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Ling Yu
Key Laboratory of Luminescence Analysis and Molecular Sensing, Ministry of Education, Institute for Clean Energy and Advanced Materials, School of Materials and Energy, Southwest University, Chongqing 400715, China
6 shared publications - Yujun Wang
College of Computer and Information Science, Southwest University, Chongqing 400715, China
3 shared publications - Feng Chen
Key Laboratory of Luminescent and Real-Time Analytical Chemistry (Southwest University), Ministry of Education, Institute for Clean Energy and Advanced Materials, Faculty of Materials and Energy, Southwest University, Chongqing 400715, China
2 shared publications Gang Chen
Institute for Clean Energy & Advanced Materials, School of Materials & Energy, Southwest University, Chongqing 400715, China
2 shared publications- Guohui Liu
College of Computer and Information Science, Southwest University, Chongqing 400715, China
2 shared publications Hui Hui Chai
Institute for Clean Energy & Advanced Materials, School of Materials & Energy, Southwest University, Chongqing 400715, China
2 shared publications
Latest Publications
- Open Access
FHQ-RRT*: An Improved Path Planning Algorithm for Mobile Robots to Acquire High-Quality Paths Faster
The Rapidly-exploring Random Tree Star (RRT*) algorithm, widely utilized for path planning, faces challenges, such as slow acquisition of feasible paths and high path costs. To address this issue, this paper presents an improved algorithm based on RRT* that can obtain high-quality paths faster, termed Faster High-Quality RRT*(FHQ-RRT*). The proposed algorithm enhances the exploration efficiency and path quality of mobile robots through three key innovations: First, a dynamic sparse sampling strategy that adaptively adjusts the sampling density according to the growth rate of the random tree, thereby increasing the algorithm’s growth speed while maintaining adaptability to complex environments. Second, a new node creation method that combines the bisection method, triangle inequality, and the concept of KeyPoints to reduce the cost of creating new nodes. Third, a focused rewiring strategy that restricts the rewiring operation to valuable regions, thereby improving rewiring efficiency. The performance of FHQ-RRT* was validated in four simulation maps and compared with other algorithms. In all validated maps, FHQ-RRT* consistently achieved the lowest path cost. Regarding time cost, FHQ-RRT* reduced the planning time by over 40% in the circular-obstacle map, 77% in the simple maze map, 56% in the complex maze map, and 50% in the narrow map. The simulation results show that FHQ-RRT* can rapidly generate high-quality paths faster than other algorithms.
Open AccessFHQ-RRT*: An Improved Path Planning Algorithm for Mobile Robots to Acquire High-Quality Paths Faster
The Rapidly-exploring Random Tree Star (RRT*) algorithm, widely utilized for path planning, faces challenges, such as slow acquisition of feasible paths and high path costs. To address this issue, this paper presents an improved algorithm based on RRT* that can obtain high-quality paths faster, termed Faster High-Quality RRT*(FHQ-RRT*). The proposed algorithm enhances the exploration efficiency and path quality of mobile robots through three key innovations: First, a dynamic sparse sampling strategy that adaptively adjusts the sampling density according to the growth rate of the random tree, thereby increasing the algorithm’s growth speed while maintaining adaptability to complex environments. Second, a new node creation method that combines the bisection method, triangle inequality, and the concept of KeyPoints to reduce the cost of creating new nodes. Third, a focused rewiring strategy that restricts the rewiring operation to valuable regions, thereby improving rewiring efficiency. The performance of FHQ-RRT* was validated in four simulation maps and compared with other algorithms. In all validated maps, FHQ-RRT* consistently achieved the lowest path cost. Regarding time cost, FHQ-RRT* reduced the planning time by over 40% in the circular-obstacle map, 77% in the simple maze map, 56% in the complex maze map, and 50% in the narrow map. The simulation results show that FHQ-RRT* can rapidly generate high-quality paths faster than other algorithms.
- 5 January 2025
- Published by Elsevier in Measurement
- Vol. 245
A mirror-assisted imaging device enables side-view observation of microscale changes at interface without modifying the microscope
- 5 January 2025
- Published by Elsevier in Measurement
- Vol. 245
A mirror-assisted imaging device enables side-view observation of microscale changes at interface without modifying the microscope
- Open Access
Improved RRT* Path-Planning Algorithm Based on the Clothoid Curve for a Mobile Robot Under Kinematic Constraints
In this paper, we propose an algorithm based on the Rapidly-exploring Random Trees* (RRT*) algorithm for the path planning of mobile robots under kinematic constraints, aiming to generate efficient and smooth paths quickly. Compared to other algorithms, the main contributions of our proposed algorithm are as follows: First, we introduce a bidirectional expansion strategy that quickly identifies a direct path to the goal point in a short time. Second, a node reconnection strategy is used to eliminate unnecessary nodes, thereby reducing the path length and saving memory. Third, a path deformation strategy based on the Clothoid curve is devised to enhance obstacle avoidance and path-planning capability, ensuring collision-free paths that comply with the kinematic constraints of mobile robots. Simulation results demonstrate that our algorithm is simpler, more computationally efficient, expedites pathfinding, achieves higher success rates, and produces smoother paths compared to existing algorithms.
Open AccessImproved RRT* Path-Planning Algorithm Based on the Clothoid Curve for a Mobile Robot Under Kinematic Constraints
In this paper, we propose an algorithm based on the Rapidly-exploring Random Trees* (RRT*) algorithm for the path planning of mobile robots under kinematic constraints, aiming to generate efficient and smooth paths quickly. Compared to other algorithms, the main contributions of our proposed algorithm are as follows: First, we introduce a bidirectional expansion strategy that quickly identifies a direct path to the goal point in a short time. Second, a node reconnection strategy is used to eliminate unnecessary nodes, thereby reducing the path length and saving memory. Third, a path deformation strategy based on the Clothoid curve is devised to enhance obstacle avoidance and path-planning capability, ensuring collision-free paths that comply with the kinematic constraints of mobile robots. Simulation results demonstrate that our algorithm is simpler, more computationally efficient, expedites pathfinding, achieves higher success rates, and produces smoother paths compared to existing algorithms.
- 16 July 2020
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 12 (33) , 4166-4171
A smartphone-supported portable micro-spectroscopy/imaging system to characterize morphology and spectra of samples at the microscale
A novel portable smartphone-based micro-spectroscopy/imaging system comprising a mini wireless spectrometer as an optical sensor and a compact homemade microscope to precisely acquire the spectra and image of micron-scale regions.
- 16 July 2020
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 12 (33) , 4166-4171
A smartphone-supported portable micro-spectroscopy/imaging system to characterize morphology and spectra of samples at the microscale
A novel portable smartphone-based micro-spectroscopy/imaging system comprising a mini wireless spectrometer as an optical sensor and a compact homemade microscope to precisely acquire the spectra and image of micron-scale regions.
- Open Access
Hydrophilic Porous Polydimethysiloxane Sponge as a Novel 3D Matrix Mimicking Heterogeneous Pores in Soil for Plant Cultivation
In this work, a citric acid monohydrate (CAM)-templated polydimethylsiloxane (PDMS) sponge was proposed to mimic heterogeneous pore structures in the soil for plant cultivation. The porosity of the PDMS sponges was tuned by adjusting the CAM template. The water intake capability of the sponge was improved by (3-Aminopropyl) triethoxysilane (APTES) functionalization. The pore size and pore distribution were characterized by SEM and micro-computed tomography (micro-CT). The effect of pore structures on Oryzasativa (O. sativa) growth was investigated. Also, a 3D multi-layer PDMS sponge assembling was proposed to mimic the heterogeneous pore distribution at the different soil depth. The different growth rates of O. sativa and Nicotiana tabacum L. (N. tabacum) seeds on porous PDMS sponge indicated the impact of physical obstacles (pores) and chemical (water content) conditions on plant development. It is anticipated that this PDMS sponge could serve as a 3D matrix to mimic soil and provide a new idea for plant cultivation.
Open AccessHydrophilic Porous Polydimethysiloxane Sponge as a Novel 3D Matrix Mimicking Heterogeneous Pores in Soil for Plant Cultivation
In this work, a citric acid monohydrate (CAM)-templated polydimethylsiloxane (PDMS) sponge was proposed to mimic heterogeneous pore structures in the soil for plant cultivation. The porosity of the PDMS sponges was tuned by adjusting the CAM template. The water intake capability of the sponge was improved by (3-Aminopropyl) triethoxysilane (APTES) functionalization. The pore size and pore distribution were characterized by SEM and micro-computed tomography (micro-CT). The effect of pore structures on Oryzasativa (O. sativa) growth was investigated. Also, a 3D multi-layer PDMS sponge assembling was proposed to mimic the heterogeneous pore distribution at the different soil depth. The different growth rates of O. sativa and Nicotiana tabacum L. (N. tabacum) seeds on porous PDMS sponge indicated the impact of physical obstacles (pores) and chemical (water content) conditions on plant development. It is anticipated that this PDMS sponge could serve as a 3D matrix to mimic soil and provide a new idea for plant cultivation.
- Open Access
- 17 December 2019
- Published by MDPI AG in Micromachines
- Vol. 10 (12) , 884
A Foldable Chip Array for the Continuous Investigation of Seed Germination and the Subsequent Root Development of Seedlings
Seed germination and seedling root development are important indicators of plant development. This work designed and fabricated a foldable microfluidic chip array for conducting nondestructive and continuous evaluation of seed germination and subsequent seedling development in situ. Each plant chamber has two functional units: seed germination part and root-growth part. The root-growth parts are themselves connected to a single channel designed to provide a uniform culture medium for plant growth. The individual chips are connected into an array using elastic hinges that facilitate the folding and unfolding of the array to accommodate different viewing purposes. In the folded state, the seed germination chambers form a closely spaced array platform to facilitate the comparison of seed germination and plant development characteristics. Unfolding the array facilitates a clear examination of root development within the root-growth parts. The observation window of an individual chip facilitates either the direct examination of the developing seedling (e.g., stems and leaves) or the use of a microscope for examining microscale features (e.g., root tips and root hairs). The potential of the proposed foldable chip array as a new cultivation platform for botanic studies is demonstrated by examining the seed germination and seedling development of tobacco (Nicotiana tabacum) under different cultivation conditions.
- 17 December 2019
- Published by MDPI AG in Micromachines
- Vol. 10 (12) , 884
Open AccessA Foldable Chip Array for the Continuous Investigation of Seed Germination and the Subsequent Root Development of Seedlings
Seed germination and seedling root development are important indicators of plant development. This work designed and fabricated a foldable microfluidic chip array for conducting nondestructive and continuous evaluation of seed germination and subsequent seedling development in situ. Each plant chamber has two functional units: seed germination part and root-growth part. The root-growth parts are themselves connected to a single channel designed to provide a uniform culture medium for plant growth. The individual chips are connected into an array using elastic hinges that facilitate the folding and unfolding of the array to accommodate different viewing purposes. In the folded state, the seed germination chambers form a closely spaced array platform to facilitate the comparison of seed germination and plant development characteristics. Unfolding the array facilitates a clear examination of root development within the root-growth parts. The observation window of an individual chip facilitates either the direct examination of the developing seedling (e.g., stems and leaves) or the use of a microscope for examining microscale features (e.g., root tips and root hairs). The potential of the proposed foldable chip array as a new cultivation platform for botanic studies is demonstrated by examining the seed germination and seedling development of tobacco (Nicotiana tabacum) under different cultivation conditions.
- Open Access
- 4 September 2018
- Published by Optica Publishing Group in Biomedical Optics Express
- Vol. 9 (10) , 4604-4612
Smartphone supported backlight illumination and image acquisition for microfluidic-based point-of-care testing
A smartphone-based image analysis system is advantageous for point-of-care testing applications. However, the processes of observation and image recording rely heavily on an external attachment that includes additional light sources. Moreover, microfluidic point-of-care devices are highly miniaturized, and can be clearly observed only under magnification. To address these issues, the present work proposes a novel imaging box for converting the built-in light source of a smartphone into uniform backlight illumination to avoid interference arising from reflections. A multi-piece orthoscopic lens is embedded in the imaging box to enable the imaging of micro-sized samples. As such, the colorimetric signal of a microchannel with a width as small as 25 µm can be faithfully recorded. Protein concentration quantification based on the bicinchoninic acid assay method was demonstrated with the proposed smartphone/imaging box system from an analysis of colorimetric signals. In addition, a microfluidic chip for conducting ABO blood typing was fabricated, and the microscopic imaging of induced blood coagulation can be clearly observed in a 3 µL sample using the proposed system. These results highlight the potential for adopting smartphone-based analysis systems in point-of-care testing applications.
- 4 September 2018
- Published by Optica Publishing Group in Biomedical Optics Express
- Vol. 9 (10) , 4604-4612
Open AccessSmartphone supported backlight illumination and image acquisition for microfluidic-based point-of-care testing
A smartphone-based image analysis system is advantageous for point-of-care testing applications. However, the processes of observation and image recording rely heavily on an external attachment that includes additional light sources. Moreover, microfluidic point-of-care devices are highly miniaturized, and can be clearly observed only under magnification. To address these issues, the present work proposes a novel imaging box for converting the built-in light source of a smartphone into uniform backlight illumination to avoid interference arising from reflections. A multi-piece orthoscopic lens is embedded in the imaging box to enable the imaging of micro-sized samples. As such, the colorimetric signal of a microchannel with a width as small as 25 µm can be faithfully recorded. Protein concentration quantification based on the bicinchoninic acid assay method was demonstrated with the proposed smartphone/imaging box system from an analysis of colorimetric signals. In addition, a microfluidic chip for conducting ABO blood typing was fabricated, and the microscopic imaging of induced blood coagulation can be clearly observed in a 3 µL sample using the proposed system. These results highlight the potential for adopting smartphone-based analysis systems in point-of-care testing applications.
- Open Access
- 9 April 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 160, 06006
Novel Design of a Biaxial and Four-Wheeled Robot Capable of Steering
The paper presents a biaxial and four-wheeled robot, mainly composed of two axle, two circular wheels and two three-leaved wheels. By analyzing the difference between the velocity of the circular wheel and three-leaved wheel in same axle, the steering principle of the difference velocity is proved. The three-leaved wheels are installed by a complementary phase method to ensure the stability of the robot walking. Through the steering principle, the control method of robot’s forward, backward, turn left and turn right is designed. A large number of experimental results show that the robot has the characteristics of high steering efficiency, simple mechanical structure and easy to control.
- 9 April 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 160, 06006
Open AccessNovel Design of a Biaxial and Four-Wheeled Robot Capable of Steering
The paper presents a biaxial and four-wheeled robot, mainly composed of two axle, two circular wheels and two three-leaved wheels. By analyzing the difference between the velocity of the circular wheel and three-leaved wheel in same axle, the steering principle of the difference velocity is proved. The three-leaved wheels are installed by a complementary phase method to ensure the stability of the robot walking. Through the steering principle, the control method of robot’s forward, backward, turn left and turn right is designed. A large number of experimental results show that the robot has the characteristics of high steering efficiency, simple mechanical structure and easy to control.
- 30 March 2017
- Published by Springer Nature in Microfluidics and Nanofluidics
- Vol. 21 (4) , 1-8
Integration of paper and micropipette tip to build a “sample-in, answer-out” point-of-care device
- 30 March 2017
- Published by Springer Nature in Microfluidics and Nanofluidics
- Vol. 21 (4) , 1-8
Integration of paper and micropipette tip to build a “sample-in, answer-out” point-of-care device
- 28 September 2015
- Published by Springer Nature in Multimedia Tools and Applications
- Vol. 75 (9) , 5147-5160
Light source imitation by using galvanometer scanner and spot light
- 28 September 2015
- Published by Springer Nature in Multimedia Tools and Applications
- Vol. 75 (9) , 5147-5160
Light source imitation by using galvanometer scanner and spot light