AIAnastasiia Iziumova

Anastasiia Iziumova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Anastasiia Iziumova has a total of 74 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Increasing the wear resistance of rolling bearings by laser shock peening

    by Anastasia Iziumova, Marat Bronovets, Pavel Bukovskiy, Irina Goryacheva, Aleksei Vshivkov, Elena Gachegova, Rustam Sabirov, Oleg Plekhov

    Rolling bearings are among the most common components, used in virtually all branches of industry—from bicycles to space stations, including industrial and machinery equipment, automobiles, aircraft, rockets, and household appliances. Residual stresses and surface quality play a significant role in enhancing the tribological characteristics of friction pairs. Laser shock peening (LSP) is a promising method for residual stresses design, allowing for their magnitude and depth to be varied over a wide range. This study involved the LSP of friction pairs made from high-chromium bearing steel grade AISI 440-С (95Х18Ш in Russia). The results demonstrate significant improvements in tribological characteristics under both dry and boundary friction conditions. LSP led to a change in the wear mechanism, which in turn reduces wear.

  • Assessment of the critical distance magnitude after laser shock peening

    by Igor Kudryashev, Anastasia Iziumova, Mariia Bartolomei, Aleksei Vshivkov, Mikhail Ugolnikov, Alena Vedernikova, Oleg Plekhov

  • Residual stress field investigation of notched TC4 specimens after laser shock peening

    by Mariia Bartolomei, Anastasia Iziumova, Aleksei Vshivkov, Elena Gachegova, Oleg Plekhov, Denis Davydov


  • Open Access

    Comparative analysis of methods for measuring residual stresses in a nickel alloy after laser shock peening

    by Е. А. Gachegova, I. M. Vinogradov, А. Yu. Iziumovа, A. N. Vshivkov, М. L. Bartolomei, I. S. Kudryashev, О. А. Plekhov, S. V. Zherebtsov

    The aim of this study is to evaluate the correlation of residual stress profiles obtained by the method of X-ray diffraction with layer removal and the hole-drilling method and to validate the numerical model of the residual stress formation process in Inconel 718 nickel alloy plates after laser shock peening. Three laser shock peening modes, differing in power density and the number of processing layers, are used to generate residual stress fields of different depths and magnitudes. It has been found that a direct quantitative comparison of these methods is incorrect due to differences in their physical principles. It is shown that the hole-drilling method is more indicative of the effect of the processing modes on residual stress profiles since it is sensitive to the plastic strain induced by intense laser shock loading. Based on the experimental data obtained by this method, the numerical model has been validated. It has been proved that a single set of model parameters provides an adequate prediction of residual stress fields when the laser shock peening process parameters are varied.

  • Open Access

    Acoustic-Emission Features of Fatigue Crack Propagation in TC4 Titanium Alloy after Laser Shock Peening

    by A. Yu Iziumova, A. N Vshivkov, V. A Mubassarova, I. A Panteleev, M. V Ugolnikov, A. V Ilyinykh, O. A Plekhov, Изюмова А. Ю, Ильиных А. В, Плехов О. А

    The study aims at describing characteristic features of acoustic emission (AE) signals during fatigue crack development in the residual stress field pre-created by laser shock peening (LSP). This method consists in the formation of the residual stress field by high-power short-pulse laser impact and generation of the elastic-plastic wave in the material. As a result of such impact, the material structure in the surface layer undergoes changes that affect not only the possibilities of fatigue crack initiation and development, but also the AE characteristics in the process of cyclic deformation. In the course of work, a series of samples from titanium alloy TC4 were subjected to LSP in the stress concentrator zone in order to retard fatigue crack initiation and development. Further, the treated specimens were tested under cyclic deformation conditions to demonstrate the effectiveness of the selected LSP mode. The crack length was measured by the electric potential drop method. AE signals were recorded on the investigated specimens during testing. On the basis of the experimental data obtained, cluster analysis of AE signals was carried out. The AE data were clearly divided into two clusters, which may indicate the presence of two dominant sources of AE signals, qualitatively reflecting the two predominant fracture mechanisms. It has been shown that the value of the cumulative energy of the AE signals in each of the clusters is significantly higher in the post-LSP samples compared to the base samples before the moment of crack growth. Thus, as a result of LSP, significant changes in the evolution of AE signals during cyclic deformation of titanium alloy TC4 specimens with a lateral semicircular notch are observed. This indirectly indicates that LSP affects the structural characteristics of the material, creating a residual stress field and extending the fatigue life of the specimens.


  • Studying the structure and mechanical behavior of acrylonitrile-butadiene-styrene samples after laser hardening

    by Perm National Research Polytechnic University, I. V. Vindokurov, M. A. Tashkinov, V. A. Mubassarova, I. A. Panteleev, O. A. Plekhov, A. Yu. Iziumova, A. N. Vshivkov

    Improving the fatigue and strength properties of structural materials involves various surface processing methods. Laser shock peening (LSP), typically applied to the surfaces of metal components and structures, is one of the widely used approaches. This study explores the potential application of LSP to non-metallic composite materials produced via fused deposition modeling. The research examines the physical mechanisms and fundamental principles of LSP, along with its effects on the microstructure and mechanical properties of composite products. The structure of the composite samples before and after LSP was analyzed by X-ray computed microtomography. Tensile tests were conducted on samples treated with LSP, and different absorbing layers were compared, namely aluminum foil, PVC tape, and gold coating. The results have shown that the mechanical properties of the LSP-treated samples, regardless of the absorbing layer used, differ only slightly from each other and from the untreated samples.

  • Crack Propagation Under Residual Stress Field Induced by Laser Shock Peening

    by A. N. Vshivkov, A. Yu. Iziumova, E. A. Gachegova, M. L. Bartolomei, O. A. Plekhov, M. V. Ugolnikov, A. V. Ilinykh, V. E. Wildemann


  • Structural and Fatigue Features of Ti64 Alloy after Different Laser Shock Peening

    by A. N. Vshivkov, A. Yu. Iziumova, E. A. Gachegova, O. A. Plekhov


  • Development of an Energy-Based Experimental Method for Estimation of Fatigue Crack Evolution in Titanium Alloys

    by A. Yu. Iziumova, A. N. Vshivkov, O. A. Plekhov

    This paper presents an experimental study of energy dissipation caused by fatigue crack growth in Grade 2 titanium and titanium alloys Ti-1.1Al-0.9Mn and Ti-4.6Al-1.77V using the original heat flux method. It is shown that significant structural changes occur in the material under plastic deformation, leading to internal energy evolution. As is known, a large part of the deformation energy is dissipated as heat. The developed method allows high-accuracy measurements of the heat flux caused by plastic zone development at the crack tip directly in the fatigue experiment. Simultaneous measurements of the crack length and displacements in the stress concentration zone allow estimating the energy balance of the tested specimens. Analysis of the obtained data confirms that the stored strain energy reflecting the structural state of the material can be used as a fracture criterion. Based on the heat flux data, a kinetic equation is derived for predicting the rate of fatigue crack growth under Paris’s law by the energy dissipation rate.


  • Open Access

    X-RAY COMPUTED TOMOGRAPHY CHARACTERIZATION OF 3D-PRINTED ACRYLONITRILE BUTADIENE STYRENE AND POLYETHERETHERKETONE COMPOSITES SUBJECTED TO LASER SHOCK PEENING

    by V. A. Mubassarova, I. A. Panteleev, O. A. Plekhov, A. Yu. Iziumova, A. N. Vshivkov, I. V. Vindokurov, M. A. Tashkinov, Изюмова А. Ю.

    The paper deals with X-ray computed tomography results of a polyetheretherketone (PEEK) and a short carbon fibre reinforced by acrylonitrile butadiene styrene (ABS+CF). Individual carbon fibres and 3D printing defects (consolidated structures of interconnected fibres and densified resin clumps) are detected on an initial microstructure of the ABS+CF composite. The carbon fibres and the consolidated structures are densely packed with uniform sub-horizontal locations throughout in a sample volume. In the PEEK samples, the process-induced defects during the composite manufacturing process are visualised as tubular structures of a densified resin with internal voids. Significant changes in the structure of both composites are observed after five times pulsed laser shock peening. In case of a single pulse exposure and a surface treatment, no microstructural changes occur. In a test mode without a protective layer, a material evaporation to a depth of 0.3 mm and a structural degradation of the PEEK samples takes place, while the process-induced interlayer voids do not close. A single consolidated area with a porous spongy structure occurs due to melting of the carbon fibres in the ABS+CF composite. The results show that the laser shock peening has a significant effect on the surface microstructure. It is therefore necessary to carry out further experiments to select the optimum laser shock peening parameters and a protective layer material to eliminate the process-induced defects and improve the strength properties of the composites.