XZXining Zhang

Xining Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xining Zhang has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Fabrication and Actuation of Cu-Ionic Polymer Metal Composite

    by Liang Yang, Dongsheng Zhang, Xining Zhang, Aifen Tian

    In this study, Cu-Ionic polymer metal composites (Cu-IPMC) were fabricated using the electroless plating method. The properties of Cu-IPMC in terms of morphology, water loss rate, adhesive force, surface resistance, displacements, and tip forces were evaluated under direct current voltage. In order to understand the relationship between lengths and actuation properties, we developed two static models of displacements and tip forces. The deposited Cu layer is uniform and smooth and contains about 90% by weight of copper, according to the energy-dispersive X-ray spectroscopy (EDS) analysis data obtained. The electrodes adhere well (level of 5B) on the membrane, to ensure a better conductivity and improve the actuation performance. The penetration depth of needle-like electrodes can reach up to around 70 μm, and the structure shows concise without complex branches, to speed up the actuation. Overall the maximum displacement increased as the voltage increased. The applied voltage for the maximum force output is 8–9 V. The root mean square error (RMSE) and determination coefficient (DC) of the displacement and force models are 1.66 and 1.23, 0.96 and 0.86, respectively.


  • An Online Active Balancing Method Using Magnetorheological Effect of Magnetic Fluid

    by Xining Zhang, Xinrui Xia, Zhou Xiang, Yanan You, Bing Li

    The improvement of machining efficiency and precision puts forward new requirements for the balancing performance of machine tool spindle. Work piece quality can be effectively improved by implementing the active balance on the spindle. In this paper, a new active balancing method using magnetorheological (MR) effect of magnetic fluid is proposed. The mechanism of forming compensation mass by changing the distribution of magnetic fluid under local magnetic field is expounded. Experiments are carried out to verify the feasibility of the proposed method. Profile lines of magnetic fluid surface shape at different positions are measured with linear laser projection measurement method in experiments. Three-dimensional (3D) surface shape of the magnetic fluid is reconstructed by the synthesis of the measured profile lines. Experiments demonstrate that mass center of the magnetic fluid increases with the strength of magnetic field. Thus, the feasibility of the proposed method is verified experimentally. In order to weaken the vibration of machine tool spindle using this method, a balancing device is designed, which includes magnetic fluid chambers and three conjugated C-type electromagnets arranged at 120 deg intervals. For each electromagnet, the relationship among compensation mass (the corresponding balancing mass), excitation current, and rotation speed is established. Also, the performance of the balancing device is further proved in experiments conducted on the experimental platform. The imbalance vibration amplitude of the test spindle decreased by an average of 87.9% indicates that the proposed active balancing method in this paper is promising.


  • New Active Online Balancing Method for Grinding Wheel Using Liquid Injection and Free Dripping

    by Xining Zhang, Xu Liu, Huan Zhao

    Grinding is a vital method in machining techniques and an effective way to process materials such as hardened steels and silicon wafers. However, as the running time increases, the unbalance of grinding wheels produce a severe vibration and noise of grinding machines because of the uneven shedding of abrasive particles and the uneven adsorption of coolant, which has a severe and direct impact on the accuracy and quality of parts. Online balancing is an important and necessary technique to reduce the unbalance causing by these factors and adjust the time-varying balance condition of the grinding wheel. A new active online balancing method using liquid injection and free dripping is proposed in this paper. The proposed online balancing method possesses a continuous balancing ability and the problem of losing balancing ability for the active online balancing method using liquid injection is solved effectively because some chambers are full of liquid. The residual liquid contained in the balancing chambers is utilized as a compensation mass for reducing rotor unbalance, where the rotor phase is proposed herein as a target for determining the machine unbalance. A new balancing device with a controllable injection and free dripping structure is successfully designed. The relationship between the mass of liquid in the balancing chamber and the centrifugal force produced by liquid is identified. The performance of the proposed method is verified by the balancing experiments and the results of these experiments show that the vibration of unbalance response is reduced by 87.3% at 2700 r/min.


  • Fractional Proportional Integral Control for Pneumatic Position Servo Systems

    by Cao Junyi, Cao Binggang, Zhang Xining, Wen Guangrui

    A novel fractional PIalpha control strategy for pneumatic position servo system is presented in order to solve its strong non-linearity and low natural frequency problem. To demonstrate their better control characteristics, the fractional order control experiments under various conditions, which include step position signal, sine position signal with different frequency and amplitude, variety load etc, are carried out along with a detailed comparative analysis with traditional control. The results show the effectiveness of the proposed scheme and verify their fine control performance for pneumatic position servo system with the nonlinearity and parameter uncertainty.