Himanshu Thapliyal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Himanshu Thapliyal has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- M. B. Srinivas
Center for VLSI and Embedded System Technologies International Institute of Information Technology Hyderabad-500019 India
7 shared publications - Achutavarrier Prasad Vinod
School of Computer Engineering, Nanyang Technological University, Singapore
5 shared publications - Hamid Reza Arabnia
School of Computing, University of Georgia, Athens, GA 30602, USA, USA
4 shared publications - Mark Zwolinski
University of Southampton
2 shared publications - Saurabh Kotiyal1 shared publication
Latest Publications
- 1 May 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 02714302,p. 1085-1088
Designing Efficient Online Testable Reversible Adders With New Reversible Gate
Reversible logic is emerging as a promising computing paradigm having its applications in low power VLSI design, quantum computing, nanotechnology and optical computing. In this paper, a new 4 times 4 reversible gate termed `OTG' (online testable gate) is proposed suitable for online testability in reversible logic circuits. OTG can also work singly as a reversible full adder with a bare minimum of two garbage outputs. OTG is shown better than the recently proposed R1 gate (introduced for providing online testability in reversible logic circuits), in terms of computation complexity. The proposed reversible gate is combined with the existing 4 times 4 Feynman gate to design online testable reversible adders such as ripple carry adder, carry skip adder and BCD adder. The efficient reversible design of two pair rail checker is also shown in this paper. The testable reversible circuits proposed in this work are shown to be better than the recently proposed testable designs in terms of number of reversible gates, garbage outputs and unit delay
- 1 May 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 02714302,p. 1085-1088
Designing Efficient Online Testable Reversible Adders With New Reversible Gate
Reversible logic is emerging as a promising computing paradigm having its applications in low power VLSI design, quantum computing, nanotechnology and optical computing. In this paper, a new 4 times 4 reversible gate termed `OTG' (online testable gate) is proposed suitable for online testability in reversible logic circuits. OTG can also work singly as a reversible full adder with a bare minimum of two garbage outputs. OTG is shown better than the recently proposed R1 gate (introduced for providing online testability in reversible logic circuits), in terms of computation complexity. The proposed reversible gate is combined with the existing 4 times 4 Feynman gate to design online testable reversible adders such as ripple carry adder, carry skip adder and BCD adder. The efficient reversible design of two pair rail checker is also shown in this paper. The testable reversible circuits proposed in this work are shown to be better than the recently proposed testable designs in terms of number of reversible gates, garbage outputs and unit delay
- 1 May 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 02714302,p. 625-628
Design of Reversible Sequential Elements With Feasibility of Transistor Implementation
This paper presents the novel designs of reversible sequential circuits (latches and flip flops). The proposed reversible latches and flip flops are designed from reversible Fredkin, Feynman and Toffoli gates. Two new reversible gates called modified Fredkin gate (MFG) and modified Toffoli gate (MTG) are also proposed to design the optimized implementations. The proposed designs are better than the recently proposed ones in terms of number of reversible gates and garbage outputs. In order to reach towards the goal of transistor implementations of proposed reversible sequential circuits, transistor implementation of the existing Feynman gate, Fredkin gate, Toffoli gates as well as the proposed MTG and MFG are also proposed. The proposed transistor implementations are completely reversible in nature, i.e., suitable for both the forward and backward computation.
- 1 May 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 02714302,p. 625-628
Design of Reversible Sequential Elements With Feasibility of Transistor Implementation
This paper presents the novel designs of reversible sequential circuits (latches and flip flops). The proposed reversible latches and flip flops are designed from reversible Fredkin, Feynman and Toffoli gates. Two new reversible gates called modified Fredkin gate (MFG) and modified Toffoli gate (MTG) are also proposed to design the optimized implementations. The proposed designs are better than the recently proposed ones in terms of number of reversible gates and garbage outputs. In order to reach towards the goal of transistor implementations of proposed reversible sequential circuits, transistor implementation of the existing Feynman gate, Fredkin gate, Toffoli gates as well as the proposed MTG and MFG are also proposed. The proposed transistor implementations are completely reversible in nature, i.e., suitable for both the forward and backward computation.
- 1 December 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 418-421
Transistor Realization of Reversible TSG Gate and Reversible Adder Architectures
Reversible logic is emerging as a promising technology with applications in design of low power arithmetic and data path units for digital signal processing (DSP), quantum computing, nanotechnology, and optical computing. In this paper, the transistor realization of a new 4*4 reversible gate called "TSG" gate is presented. The proposed TSG gate has the ability to operate as a reversible full adder i.e. reversible full adder is implemented using a single gate. The transistor realizations of 1-bit reversible full adder, reversible ripple carry adder and reversible carry skip adder are also presented. In order to have the reduced transistor overhead of reversible carry skip adder, its modified design has been proposed. We also demonstrate a method to minimize the overhead in transistor implementation of reversible arithmetic units. The transistor implementation of reversible arithmetic circuits presented in this paper finds extensive applications in computationally intensive DSP tasks
- 1 December 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 418-421
Transistor Realization of Reversible TSG Gate and Reversible Adder Architectures
Reversible logic is emerging as a promising technology with applications in design of low power arithmetic and data path units for digital signal processing (DSP), quantum computing, nanotechnology, and optical computing. In this paper, the transistor realization of a new 4*4 reversible gate called "TSG" gate is presented. The proposed TSG gate has the ability to operate as a reversible full adder i.e. reversible full adder is implemented using a single gate. The transistor realizations of 1-bit reversible full adder, reversible ripple carry adder and reversible carry skip adder are also presented. In order to have the reduced transistor overhead of reversible carry skip adder, its modified design has been proposed. We also demonstrate a method to minimize the overhead in transistor implementation of reversible arithmetic units. The transistor implementation of reversible arithmetic circuits presented in this paper finds extensive applications in computationally intensive DSP tasks
- Open Access
Combined Integer and Floating Point Multiplication Architecture(CIFM) for FPGAs and Its Reversible Logic Implementation
In this paper, the authors propose the idea of a combined integer and floating point multiplier(CIFM) for FPGAs. The authors propose the replacement of existing 18x18 dedicated multipliers in FPGAs with dedicated 24x24 multipliers designed with small 4x4 bit multipliers. It is also proposed that for every dedicated 24x24 bit multiplier block designed with 4x4 bit multipliers, four redundant 4x4 multiplier should be provided to enforce the feature of self repairability (to recover from the faults). In the proposed CIFM reconfigurability at run time is also provided resulting in low power. The major source of motivation for providing the dedicated 24x24 bit multiplier stems from the fact that single precision floating point multiplier requires 24x24 bit integer multiplier for mantissa multiplication. A reconfigurable, self-repairable 24x24 bit multiplier (implemented with 4x4 bit multiply modules) will ideally suit this purpose, making FPGAs more suitable for integer as well floating point operations. A dedicated 4x4 bit multiplier is also proposed in this paper. Moreover, in the recent years, reversible logic has emerged as a promising technology having its applications in low power CMOS, quantum computing, nanotechnology, and optical computing. It is not possible to realize quantum computing without reversible logic. Thus, this paper also paper provides the reversible logic implementation of the proposed CIFM. The reversible CIFM designed and proposed here will form the basis of the completely reversible FPGAs.
Open AccessCombined Integer and Floating Point Multiplication Architecture(CIFM) for FPGAs and Its Reversible Logic Implementation
In this paper, the authors propose the idea of a combined integer and floating point multiplier(CIFM) for FPGAs. The authors propose the replacement of existing 18x18 dedicated multipliers in FPGAs with dedicated 24x24 multipliers designed with small 4x4 bit multipliers. It is also proposed that for every dedicated 24x24 bit multiplier block designed with 4x4 bit multipliers, four redundant 4x4 multiplier should be provided to enforce the feature of self repairability (to recover from the faults). In the proposed CIFM reconfigurability at run time is also provided resulting in low power. The major source of motivation for providing the dedicated 24x24 bit multiplier stems from the fact that single precision floating point multiplier requires 24x24 bit integer multiplier for mantissa multiplication. A reconfigurable, self-repairable 24x24 bit multiplier (implemented with 4x4 bit multiply modules) will ideally suit this purpose, making FPGAs more suitable for integer as well floating point operations. A dedicated 4x4 bit multiplier is also proposed in this paper. Moreover, in the recent years, reversible logic has emerged as a promising technology having its applications in low power CMOS, quantum computing, nanotechnology, and optical computing. It is not possible to realize quantum computing without reversible logic. Thus, this paper also paper provides the reversible logic implementation of the proposed CIFM. The reversible CIFM designed and proposed here will form the basis of the completely reversible FPGAs.
- Open Access
Reversible Logic to Cryptographic Hardware: A New Paradigm
Differential Power Analysis (DPA) presents a major challenge to mathematically-secure cryptographic protocols. Attackers can break the encryption by measuring the energy consumed in the working digital circuit. To prevent this type of attack, this paper proposes the use of reversible logic for designing the ALU of a cryptosystem. Ideally, reversible circuits dissipate zero energy. Thus, it would be of great significance to apply reversible logic to designing secure cryptosystems. As far as is known, this is the first attempt to apply reversible logic to developing secure cryptosystems. In a prototype of a reversible ALU for a crypto-processor, reversible designs of adders and Montgomery multipliers are presented. The reversible designs of a carry propagate adder, four-to-two and five-to-two carry save adders are presented using a reversible TSG gate. One of the important properties of the TSG gate is that it can work singly as a reversible full adder. In order to design the reversible Montgomery multiplier, novel reversible sequential circuits are also proposed which are integrated with the proposed adders to design a reversible modulo multiplier. It is intended that this paper will provide a starting point for developing cryptosystems secure against DPA attacks.
Open AccessReversible Logic to Cryptographic Hardware: A New Paradigm
Differential Power Analysis (DPA) presents a major challenge to mathematically-secure cryptographic protocols. Attackers can break the encryption by measuring the energy consumed in the working digital circuit. To prevent this type of attack, this paper proposes the use of reversible logic for designing the ALU of a cryptosystem. Ideally, reversible circuits dissipate zero energy. Thus, it would be of great significance to apply reversible logic to designing secure cryptosystems. As far as is known, this is the first attempt to apply reversible logic to developing secure cryptosystems. In a prototype of a reversible ALU for a crypto-processor, reversible designs of adders and Montgomery multipliers are presented. The reversible designs of a carry propagate adder, four-to-two and five-to-two carry save adders are presented using a reversible TSG gate. One of the important properties of the TSG gate is that it can work singly as a reversible full adder. In order to design the reversible Montgomery multiplier, novel reversible sequential circuits are also proposed which are integrated with the proposed adders to design a reversible modulo multiplier. It is intended that this paper will provide a starting point for developing cryptosystems secure against DPA attacks.
- Open Access
Reduced Area Low Power High Throughput BCD Adders for IEEE 754r Format
IEEE 754r is the ongoing revision to the IEEE 754 floating point standard and a major enhancement to the standard is the addition of decimal format. Firstly, this paper proposes novel two transistor AND and OR gates. The proposed AND gate has no power supply, thus it can be referred as the Powerless AND gate. Similarly, the proposed two transistor OR gate has no ground and can be referred as Groundless OR. Secondly for IEEE 754r format, two novel BCD adders called carry skip and carry look-ahead BCD adders are also proposed in this paper. In order to design the carry look-ahead BCD adder, a novel 4 bit carry look-ahead adder called NCLA is proposed which forms the basic building block of the proposed carry look-ahead BCD adder. Finally, the proposed two transistors AND and OR gates are used to provide the optimized small area low power high throughput circuitries of the proposed BCD adders.
Open AccessReduced Area Low Power High Throughput BCD Adders for IEEE 754r Format
IEEE 754r is the ongoing revision to the IEEE 754 floating point standard and a major enhancement to the standard is the addition of decimal format. Firstly, this paper proposes novel two transistor AND and OR gates. The proposed AND gate has no power supply, thus it can be referred as the Powerless AND gate. Similarly, the proposed two transistor OR gate has no ground and can be referred as Groundless OR. Secondly for IEEE 754r format, two novel BCD adders called carry skip and carry look-ahead BCD adders are also proposed in this paper. In order to design the carry look-ahead BCD adder, a novel 4 bit carry look-ahead adder called NCLA is proposed which forms the basic building block of the proposed carry look-ahead BCD adder. Finally, the proposed two transistors AND and OR gates are used to provide the optimized small area low power high throughput circuitries of the proposed BCD adders.
- Open Access
Reversible Programmable Logic Array (RPLA) using Fredkin & Feynman Gates for Industrial Electronics and Applications
In recent years, reversible logic has emerged as a promising computing paradigm having application in low power CMOS, quantum computing, nanotechnology, and optical computing. The classical set of gates such as AND, OR, and EXOR are not reversible. In this paper, the authors have proposed reversible programmable logic array (RPLA) architecture using reversible Fredkin and Feynman gates. The proposed RPLA has n inputs and m outputs and can realize m functions of n variables. In order to demonstrate the design of RPLA, a 3 input RPLA is designed which can perform any 28 functions using the combination of 8 min terms (23). Furthermore, the application of the designed 3 input RPLA is shown by implementing the full adder and full subtractor functions through it.
Open AccessReversible Programmable Logic Array (RPLA) using Fredkin & Feynman Gates for Industrial Electronics and Applications
In recent years, reversible logic has emerged as a promising computing paradigm having application in low power CMOS, quantum computing, nanotechnology, and optical computing. The classical set of gates such as AND, OR, and EXOR are not reversible. In this paper, the authors have proposed reversible programmable logic array (RPLA) architecture using reversible Fredkin and Feynman gates. The proposed RPLA has n inputs and m outputs and can realize m functions of n variables. In order to demonstrate the design of RPLA, a 3 input RPLA is designed which can perform any 28 functions using the combination of 8 min terms (23). Furthermore, the application of the designed 3 input RPLA is shown by implementing the full adder and full subtractor functions through it.
- Open Access
Novel Reversible TSG Gate and Its Application for Designing Components of Primitive Reversible/Quantum ALU
In recent years, reversible logic has emerged as a promising computing paradigm having application in low power CMOS, quantum computing, nanotechnology, and optical computing. The classical set of gates such as AND, OR, and EXOR are not reversible. This paper utilizes a new 4 * 4 reversible gate called TSG gate to build the components of a primitive reversible/quantum ALU. The most significant aspect of the TSG gate is that it can work singly as a reversible full adder, that is reversible full adder can now be implemented with a single gate only. A Novel reversible 4:2 compressor is also designed from the TSG gate which is later used to design a novel 8x8 reversible Wallace tree multiplier. It is proved that the adder, 4:2 compressor and multiplier architectures designed using the TSG gate are better than their counterparts available in literature, in terms of number of reversible gates and garbage outputs. This is perhaps, the first attempt to design a reversible 4:2 compressor and a reversible Wallace tree multiplier as far as existing literature and our knowledge is concerned. Thus, this paper provides an initial threshold to build more complex systems which can execute complicated operations using reversible logic.
Open AccessNovel Reversible TSG Gate and Its Application for Designing Components of Primitive Reversible/Quantum ALU
In recent years, reversible logic has emerged as a promising computing paradigm having application in low power CMOS, quantum computing, nanotechnology, and optical computing. The classical set of gates such as AND, OR, and EXOR are not reversible. This paper utilizes a new 4 * 4 reversible gate called TSG gate to build the components of a primitive reversible/quantum ALU. The most significant aspect of the TSG gate is that it can work singly as a reversible full adder, that is reversible full adder can now be implemented with a single gate only. A Novel reversible 4:2 compressor is also designed from the TSG gate which is later used to design a novel 8x8 reversible Wallace tree multiplier. It is proved that the adder, 4:2 compressor and multiplier architectures designed using the TSG gate are better than their counterparts available in literature, in terms of number of reversible gates and garbage outputs. This is perhaps, the first attempt to design a reversible 4:2 compressor and a reversible Wallace tree multiplier as far as existing literature and our knowledge is concerned. Thus, this paper provides an initial threshold to build more complex systems which can execute complicated operations using reversible logic.
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Midwest Symposium on Circuits and Systems (mwscas)
- Vol. 1, 342-346
Reversible Logic to Cryptographic Hardware: A New Paradigm
Differential Power Analysis (DPA) presents a major challenge to mathematically-secure cryptographic protocols. Attackers can break the encryption by measuring the energy consumed in the working digital circuit. To prevent this type of attack, this paper proposes the use of reversible logic for designing the ALU of a cryptosystem. Ideally, reversible circuits dissipate zero energy. Thus, it would be of great significance to apply reversible logic to designing secure cryptosystems. As far as is known, this is the first attempt to apply reversible logic to developing secure cryptosystems. In a prototype of a reversible ALU for a crypto-processor, reversible designs of adders and Montgomery multipliers are presented. The reversible designs of a carry propagate adder, four-to-two and five-to-two carry save adders are presented using a reversible TSG gate. One of the important properties of the TSG gate is that it can work singly as a reversible full adder. In order to design the reversible Montgomery multiplier, novel reversible sequential circuits are also proposed which are integrated with the proposed adders to design a reversible modulo multiplier. It is intended that this paper will provide a starting point for developing cryptosystems secure against DPA attacks.
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Midwest Symposium on Circuits and Systems (mwscas)
- Vol. 1, 342-346
Reversible Logic to Cryptographic Hardware: A New Paradigm
Differential Power Analysis (DPA) presents a major challenge to mathematically-secure cryptographic protocols. Attackers can break the encryption by measuring the energy consumed in the working digital circuit. To prevent this type of attack, this paper proposes the use of reversible logic for designing the ALU of a cryptosystem. Ideally, reversible circuits dissipate zero energy. Thus, it would be of great significance to apply reversible logic to designing secure cryptosystems. As far as is known, this is the first attempt to apply reversible logic to developing secure cryptosystems. In a prototype of a reversible ALU for a crypto-processor, reversible designs of adders and Montgomery multipliers are presented. The reversible designs of a carry propagate adder, four-to-two and five-to-two carry save adders are presented using a reversible TSG gate. One of the important properties of the TSG gate is that it can work singly as a reversible full adder. In order to design the reversible Montgomery multiplier, novel reversible sequential circuits are also proposed which are integrated with the proposed adders to design a reversible modulo multiplier. It is intended that this paper will provide a starting point for developing cryptosystems secure against DPA attacks.
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Midwest Symposium on Circuits and Systems (mwscas)
- Vol. 2, 438-442
Combined Integer and Floating Point Multiplication Architecture(CIFM) for FPGAs and Its Reversible Logic Implementation
In this paper, the authors propose the idea of a combined integer and floating point multiplier (CIFM) for FPGAs. The authors propose the replacement of existing 18times18 dedicated multipliers in FPGAs with dedicated 24times24 multipliers designed with small 4times4 bit multipliers. It is also proposed that for every dedicated 24times24 bit multiplier block designed with 4times4 bit multipliers, four redundant 4times4 multiplier should be provided to enforce the feature of self repairability (to recover from the faults). In the proposed CIFM reconfigurability at run time is also provided resulting in low power. The major source of motivation for providing the dedicated 24times24 bit multiplier stems from the fact that single precision floating point multiplier requires 24times24 bit integer multiplier for mantissa multiplication. A reconfigurable, self-repairable 24times24 bit multiplier (implemented with 4times4 bit multiply modules) will ideally suit this purpose, making FPGAs more suitable for integer as well floating point operations. A dedicated 4times4 bit multiplier is also proposed in this paper. Moreover, in the recent years, reversible logic has emerged as a promising technology having its applications in low power CMOS, quantum computing, nanotechnology, and optical computing. It is not possible to realize quantum computing without reversible logic. Thus, this paper also paper provides the reversible logic implementation of the proposed CIFM. The reversible CIFM designed and proposed here will form the basis of the completely reversible FPGAs.
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Midwest Symposium on Circuits and Systems (mwscas)
- Vol. 2, 438-442
Combined Integer and Floating Point Multiplication Architecture(CIFM) for FPGAs and Its Reversible Logic Implementation
In this paper, the authors propose the idea of a combined integer and floating point multiplier (CIFM) for FPGAs. The authors propose the replacement of existing 18times18 dedicated multipliers in FPGAs with dedicated 24times24 multipliers designed with small 4times4 bit multipliers. It is also proposed that for every dedicated 24times24 bit multiplier block designed with 4times4 bit multipliers, four redundant 4times4 multiplier should be provided to enforce the feature of self repairability (to recover from the faults). In the proposed CIFM reconfigurability at run time is also provided resulting in low power. The major source of motivation for providing the dedicated 24times24 bit multiplier stems from the fact that single precision floating point multiplier requires 24times24 bit integer multiplier for mantissa multiplication. A reconfigurable, self-repairable 24times24 bit multiplier (implemented with 4times4 bit multiply modules) will ideally suit this purpose, making FPGAs more suitable for integer as well floating point operations. A dedicated 4times4 bit multiplier is also proposed in this paper. Moreover, in the recent years, reversible logic has emerged as a promising technology having its applications in low power CMOS, quantum computing, nanotechnology, and optical computing. It is not possible to realize quantum computing without reversible logic. Thus, this paper also paper provides the reversible logic implementation of the proposed CIFM. The reversible CIFM designed and proposed here will form the basis of the completely reversible FPGAs.