YAYeliz Asci

Yeliz Asci

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yeliz Asci has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comparative study of the removal of nickel(II) and chromium(VI) heavy metals from metal plating wastewater by two nanofiltration membranes

    by Gizem Basaran, Duygu Kavak, Nadir Dizge, Yeliz Asci, Musa Solener, Bahar Ozbey

    The treatment of aviation industry metal plating wastewater containing Ni2+ and Cr6+ by nanofiltration was investigated in this study. Two commercial membranes (NF90 and NF270) and two membrane filtration systems (dead end and cross flow) were used. The effects of both the transmembrane pressure (10, 20, and 30 bar) and the feed pH (3.5, 7, and 10) on the membrane performance were analyzed. The rejection of both nickel and chromium ions increased with increasing pH but did not considerably change by the pressure difference for both membranes. The optimum conditions were found to be at 30 bar with a pH of 10 for both the NF90 and NF270 membranes. Under optimum conditions for the NF90 membrane, the rejection values of Ni2+ and Cr6+ were found to be 99.2 and 96.5%, respectively. For the NF270 membrane, the rejection values of Ni2+ and Cr6+ were 98.7 and 95.7%, respectively.


  • Open Access

    Sorption of cobalt(II) from an aqueous medium using Amberlite 200C and Dowex 88 resins: Equilibrium and kinetic studies

    by Y. Aşçı, Ş. Kaya

    Cobalt is a toxic heavy metal found in various industrial wastewaters. In this study, the sorption mechanisms of Co(II) onto Amberlite 200C and Dowex 88 resins were investigated using batch reactors. The removal of Co(II) was examined by varying experimental conditions, such as the solution pH, sorbent dose, and temperature. The most effective pH range for cobalt removal was pH 4–8 for both resins. Langmuir, Freundlich, Redlich–Peterson, and Temkin models were applied to describe equilibrium isotherms. The sorption of Co(II) on the resins followed pseudo-second-order kinetics, and thermodynamic data indicated an endothermic and spontaneous process. ΔG° decreased with increasing temperature, indicating that the sorption process of Co(II) on both resins was more favorable at high temperatures. Desorption studies were conducted using various reagents. For both resins, the maximum percent of metal ion desorption was reached when 2 M H2SO4 was used as the reagent.


  • Open Access

    Removal of cobalt ions from water by ion-exchange method

    by Yeliz Aşçı, Şefika Kaya

    In the present work, the removal of Co(II) ions from aqueous solutions using an ion-exchange resin (Lewatit MonoPlus SP 112) was investigated. For this purpose, batch adsorption studies were carried out with various parameters such as pH and contact time. The Langmuir and Freundlich isotherm models were applied to analyze the experimental data. The best interpretation for the experimental data was given by the Langmuir isotherm and the maximum adsorption capacity was found to be 21.93 mg/g. The kinetic data were tested using pseudo-first-order, pseudo-second-order, liquid film diffusion, and intraparticle diffusion kinetic models. In addition, diffusion models were applied to explore the rate-determining step in cobalt diffusion behavior. The numerical values of the different rate constants, correlation coefficients, and effective diffusion coefficients as well as activation energy were determined. Data clarified that the adsorption process followed pseudo-second order reaction-base kinetic model. The magnitudes of the effective particle diffusion coefficient indicated that cobalt adsorption on resin was not controlled by film diffusion and pore diffusion and the chemical sorption was the rate-limiting step. The activation energy Ea confirmed that the nature of the adsorption was chemical sorption. The desorption studies were carried out using various reagents. The maximum percent desorption of the adsorbed metal ions were obtained, when 2 M HCl and 2 M H2SO4 was used as the reagent.


  • Open Access

    Decolorization of Direct Orange 26 by heterogeneous Fenton oxidation

    by Y. Aşçı

    In this work, the decolorization of Direct Orange 26 (DO26) was conducted using Fe(III)-sepiolite catalyst in the presence of hydrogen peroxide (H2O2) in a batch process. The catalyst was prepared by ion exchange. All experiments were performed on a laboratory-scale setup. The effects of different parameters such as solution pH, catalyst concentration, initial concentration of H2O2 and DO26, stirring speed on the decolorization efficiency of the process were studied. The best reaction conditions were found to be an initial pH of 2.0 when the concentration of catalyst was 1.5 g/L with [H2O2]o of 35 mM, [DO26]o of 40 mg/L, and a stirring speed of 250 rpm at a temperature of 25°C. Under optimal conditions, a 98% decolorization efficiency of DO26 was achieved within 60 min of the reaction. The kinetics of decolorization of DO26 followed second-order reaction kinetics. Stability and reuse of the catalyst were also tested. This catalyst successfully overcomes the two problems faced by the heterogeneous Fenton process. The catalyst is reusable and the high effectivity of the catalyst in a wide range of pH.


  • Open Access

    Adsorption of Zn(II) onto Turkish soil: equilibrium, kinetic and thermodynamic studies

    by Y. Asçi

    Study on the adsorption of Zn(II) onto soil is important since it relates to the bioavailability, potential toxicity of this metal and improving remediation strategies. In the present study, sorption of Zn onto soil was investigated in batch reactors with a maximum contact time of 180 min. Adsorption tests of Zn(II) were carried out using a solution concentration of 1.22 mM at initial pH = 5 and soil dosage of 1:20. The Langmuir and Freundlich models were applied to describe equilibrium isotherms. Sorption isotherms were well described by the Freundlich equation and Dubinin–Radushkevich (D–R) isotherm model was also applied to the equilibrium data. The mean free energy of adsorption (10.33 kJ mol−1) indicated that the adsorption of Zn(II) onto soil may have been carried out via chemical ion-exchange mechanism. Kinetics of sorption was characterized using Lagergren-first-order, pseudo-second-order and intraparticle diffusion models. The sorption kinetics was well described by pseudo-second-order model within the reaction times in this study. Thermodynamic parameters, free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°) of adsorption were also calculated.