Kane Usher
Research Subjects
Kane Usher has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Cedric Pradalier
Autonomous Systems Laboratory, CSIRO ICT Centre, P.O. Box 883, Kenmore, QLD 4069, Australia
3 shared publications - Jonathan Roberts
Robotics and autonomous systems, Queensland University of Technology (QUT), Brisbane City QLD 4000, Australia
3 shared publications - Peter Corke
Queensland University of Technology (QUT), Brisbane, Qld., Australia
3 shared publications - Ashley Tews
CSIRO ICT Centre
1 shared publication - Christian Laugier
INRIA Rhône-Alpes
1 shared publication - Christophe Braillon
Laboratoire GRAVIR, INRIA Rhône-Alpes, 655 avenue de l'Europe, 38334 Saint Ismier Cedex, France
1 shared publication
Latest Publications
- 1 April 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (cat. No.01ch37164)
- No. 10504729,p. 2208-2214
A simple and efficient control scheme to reverse a tractor-trailer system on a trajectory
Trailer reversing is a problem frequently considered in the literature, usually with fairly complex non-linear control theory based approaches. In this paper, we present a simple method for stabilizing a tractor-trailer system to a trajectory based on the notion of controlling the hitch-angle of the trailer rather than the steering angle of the tractor. The method is intuitive, provably stable, and shown to be viable through various experimental results conducted on our test platform, the CSIRO autonomous tractor.
- 1 April 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (cat. No.01ch37164)
- No. 10504729,p. 2208-2214
A simple and efficient control scheme to reverse a tractor-trailer system on a trajectory
Trailer reversing is a problem frequently considered in the literature, usually with fairly complex non-linear control theory based approaches. In this paper, we present a simple method for stabilizing a tractor-trailer system to a trajectory based on the notion of controlling the hitch-angle of the trailer rather than the steering angle of the tractor. The method is intuitive, provably stable, and shown to be viable through various experimental results conducted on our test platform, the CSIRO autonomous tractor.
- 1 April 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10504729,p. 2770-2771
Autonomous Hot Metal Carrier - Navigation and Manipulation with a 20 tonne industrial vehicle
This paper reports work on the automation of a hot metal carrier, which is a 20 tonne forklift-type vehicle used to move molten metal in aluminium smelters. To achieve efficient vehicle operation, issues of autonomous navigation and materials handling must be addressed. We present our complete system and experiments demonstrating reliable operation. One of the most significant experiments was five-hours of continuous operation where the vehicle travelled over 8 km and conducted 60 load handling operations. Finally, an experiment where the vehicle and autonomous operation were supervised from the other side of the world via a satellite phone network are described.
- 1 April 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10504729,p. 2770-2771
Autonomous Hot Metal Carrier - Navigation and Manipulation with a 20 tonne industrial vehicle
This paper reports work on the automation of a hot metal carrier, which is a 20 tonne forklift-type vehicle used to move molten metal in aluminium smelters. To achieve efficient vehicle operation, issues of autonomous navigation and materials handling must be addressed. We present our complete system and experiments demonstrating reliable operation. One of the most significant experiments was five-hours of continuous operation where the vehicle travelled over 8 km and conducted 60 load handling operations. Finally, an experiment where the vehicle and autonomous operation were supervised from the other side of the world via a satellite phone network are described.
- 1 October 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21530858,p. 531-536
Real-time stereo and optical flow data fusion
In this paper, we propose a real-time method to detect obstacles using theoretical models of the ground plane, first in a 3D point cloud given by a stereo camera, and then in an optical flow field given by one of the stereo pair's camera. The idea of our method is to combine two partial occupancy grids from both sensor modalities with an occupancy grid framework. The two methods do not have the same range, precision and resolution. For example, the stereo method is precise for close objects but cannot see further than 7 m (with our lenses), while the optical flow method can see considerably further but has lower accuracy. Experiments that have been carried on the CyCab mobile robot and on a tractor demonstrate that we can combine the advantages of both algorithms to build local occupancy grids from incomplete data (optical flow from a monocular camera cannot give depth information without time integration)
- 1 October 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21530858,p. 531-536
Real-time stereo and optical flow data fusion
In this paper, we propose a real-time method to detect obstacles using theoretical models of the ground plane, first in a 3D point cloud given by a stereo camera, and then in an optical flow field given by one of the stereo pair's camera. The idea of our method is to combine two partial occupancy grids from both sensor modalities with an occupancy grid framework. The two methods do not have the same range, precision and resolution. For example, the stereo method is precise for close objects but cannot see further than 7 m (with our lenses), while the optical flow method can see considerably further but has lower accuracy. Experiments that have been carried on the CyCab mobile robot and on a tractor demonstrate that we can combine the advantages of both algorithms to build local occupancy grids from incomplete data (optical flow from a monocular camera cannot give depth information without time integration)
- 1 October 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21530858,p. 3527-3532
Two Seconds to Touchdown - Vision-Based Controlled Forced Landing
The use of UAVs in civilian and domestic applications is highly demanding, requiring a high-level of capability from the vehicles. This work addresses the task in which a UAV is performing an inspection on a set of power lines and an emergency situation occurs requiring the UAV to avoid the lines and then find a safe landing area (a forced landing). This problem is approached using vision, where the vision system acts as the overall controller sending velocity commands to a low-level controller. The use of vision here allows the 2D position of the UAV to be updated by an image-based signal where the error to minimize is the location of a feature or set of features in the image. The system has been tested in a air vehicle simulator (AVS) - a cable array robot which allows to simulate and control three DOF (translation) of a UAV. Results obtained from tests in a scale scenario show the feasibility of this approach
- 1 October 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21530858,p. 3527-3532
Two Seconds to Touchdown - Vision-Based Controlled Forced Landing
The use of UAVs in civilian and domestic applications is highly demanding, requiring a high-level of capability from the vehicles. This work addresses the task in which a UAV is performing an inspection on a set of power lines and an emergency situation occurs requiring the UAV to avoid the lines and then find a safe landing area (a forced landing). This problem is approached using vision, where the vision system acts as the overall controller sending velocity commands to a low-level controller. The use of vision here allows the 2D position of the UAV to be updated by an image-based signal where the error to minimize is the location of a feature or set of features in the image. The system has been tested in a air vehicle simulator (AVS) - a cable array robot which allows to simulate and control three DOF (translation) of a UAV. Results obtained from tests in a scale scenario show the feasibility of this approach
- 7 July 2006
- Published by Springer Nature
- p. 61-70
Landmark-Based Nonholonomic Visual Homing
- 9 March 2006
- Published by Springer Nature
- p. 471-481
Vision-Based Navigational Competencies for a Car-like Vehicle
- 9 March 2006
- Published by Springer Nature
- p. 471-481
Vision-Based Navigational Competencies for a Car-like Vehicle