Pehr. E. Pehrsson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Pehr. E. Pehrsson has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Daniel C. Ratchford
U.S. Naval Research Laboratory, Washington, D.C. 20375, United States
2 shared publications Grant C. Daniels
2 shared publicationsJunghoon Yeom
National Research Council Research Associateship Program, Naval Research Laboratory, Washington, DC 20375, USA
2 shared publications- Banahalli R Ratna
Naval Research Laboratory, Center for Bio/Molecular Science and Engineering, 4555 Overlook Ave. S.W., Washington DC, 20375, USA
1 shared publication - Bradley R Spies
Naval Research Laboratory Code 5711, 4555 Overlook Ave. S.W., Washington DC, 20375, USA
1 shared publication - Carissa M. Soto
Center for Bio/Molecular Science and Engineering, US Naval Research Laboratory, 4555 Overlook Avenue SW, Code 6900, Washington DC 20375, USA; Department of Biological Chemistry, John Innes Centre, Norwich Research Park, Norwich NR4 7UH, United Kingdom
1 shared publication
Latest Publications
- 12 April 2019
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 2 (4) , 2295-2307
Conformal Nanoscale Zirconium Hydroxide Films for Decomposing Chemical Warfare Agents
- 12 April 2019
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 2 (4) , 2295-2307
Conformal Nanoscale Zirconium Hydroxide Films for Decomposing Chemical Warfare Agents
- 31 October 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (45) , 39747-39757
Environmental Effects on Zirconium Hydroxide Nanoparticles and Chemical Warfare Agent Decomposition: Implications of Atmospheric Water and Carbon Dioxide
Zirconium hydroxide (Zr(OH)4) has excellent sorption properties and wide-ranging reactivity toward numerous types of chemical warfare agents (CWAs) and toxic industrial chemicals. Under pristine laboratory conditions, the effectiveness of Zr(OH)4 has been attributed to a combination of diverse surface hydroxyl species and defects; however, atmospheric components (e.g., CO2, H2O, etc.) and trace contaminants can form adsorbates with potentially detrimental impact to the chemical reactivity of Zr(OH)4. Here, we report the hydrolysis of a CWA simulant, dimethyl methylphosphonate (DMMP) on Zr(OH)4 determined by gas chromatography–mass spectrometry and in situ attenuated total reflectance Fourier transform infrared spectroscopy under ambient conditions. DMMP dosing on Zr(OH)4 formed methyl methylphosphonate and methoxy degradation products on free bridging and terminal hydroxyl sites of Zr(OH)4 under all evaluated environmental conditions. CO2 dosing on Zr(OH)4 formed adsorbed (bi)carbonates and interfacial carbonate complexes with relative stability dependent on CO2 and H2O partial pressures. High concentrations of CO2 reduced DMMP decomposition kinetics by occupying Zr(OH)4 active sites with carbonaceous adsorbates. Elevated humidity promoted hydrolysis of adsorbed DMMP on Zr(OH)4 to produce methanol and regenerated free hydroxyl species. Hydrolysis of DMMP by Zr(OH)4 occurred under all conditions evaluated, demonstrating promise for chemical decontamination under diverse, real-world conditions.
- 31 October 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (45) , 39747-39757
Environmental Effects on Zirconium Hydroxide Nanoparticles and Chemical Warfare Agent Decomposition: Implications of Atmospheric Water and Carbon Dioxide
Zirconium hydroxide (Zr(OH)4) has excellent sorption properties and wide-ranging reactivity toward numerous types of chemical warfare agents (CWAs) and toxic industrial chemicals. Under pristine laboratory conditions, the effectiveness of Zr(OH)4 has been attributed to a combination of diverse surface hydroxyl species and defects; however, atmospheric components (e.g., CO2, H2O, etc.) and trace contaminants can form adsorbates with potentially detrimental impact to the chemical reactivity of Zr(OH)4. Here, we report the hydrolysis of a CWA simulant, dimethyl methylphosphonate (DMMP) on Zr(OH)4 determined by gas chromatography–mass spectrometry and in situ attenuated total reflectance Fourier transform infrared spectroscopy under ambient conditions. DMMP dosing on Zr(OH)4 formed methyl methylphosphonate and methoxy degradation products on free bridging and terminal hydroxyl sites of Zr(OH)4 under all evaluated environmental conditions. CO2 dosing on Zr(OH)4 formed adsorbed (bi)carbonates and interfacial carbonate complexes with relative stability dependent on CO2 and H2O partial pressures. High concentrations of CO2 reduced DMMP decomposition kinetics by occupying Zr(OH)4 active sites with carbonaceous adsorbates. Elevated humidity promoted hydrolysis of adsorbed DMMP on Zr(OH)4 to produce methanol and regenerated free hydroxyl species. Hydrolysis of DMMP by Zr(OH)4 occurred under all conditions evaluated, demonstrating promise for chemical decontamination under diverse, real-world conditions.
- 10 February 2015
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 7 (9) , 4124-4133
Influence of inhomogeneous porosity on silicon nanowire Raman enhancement and leaky mode modulated photoluminescence
Metal-assisted chemical etching (MACE) offers an inexpensive, massively parallel fabrication process for producing silicon nanowires (SiNWs). These nanowires can possess a degree of porosity depending on etch conditions. Because the porosity is often spatially inhomogeneous, there is a need to better understand its nature if applications exploiting the porosity are to be pursued. Here, the resolution afforded by micro-Raman and micro-photoluminescence (PL) is used to elucidate the effects of porosity heterogeneity on the optical properties of individual SiNWs produced in large arrays with MACE, while also determining the spatial character of the heterogeneity. For highly porous SiNWs, there is a dramatic reduction in Raman signal and an increase in PL near the SiNW tips. PL spectra collected along the SiNW length exhibit peaks due to leaky mode resonances. Analysis of the PL resonance peaks, Raman spectrum line shape, SEM images, and EDS spectra indicate that the SiNWs possess both radial and axial heterogeneity wherein, from base to SiNW tip, the SiNWs comprise a shell of increasingly thick porous Si surrounding a tapering core of bulk Si. This work describes how structural porosity variation shapes SiNW optical properties, which will influence the design of new SiNW-based photonic devices and chemical/biological sensors.
- 10 February 2015
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 7 (9) , 4124-4133
Influence of inhomogeneous porosity on silicon nanowire Raman enhancement and leaky mode modulated photoluminescence
Metal-assisted chemical etching (MACE) offers an inexpensive, massively parallel fabrication process for producing silicon nanowires (SiNWs). These nanowires can possess a degree of porosity depending on etch conditions. Because the porosity is often spatially inhomogeneous, there is a need to better understand its nature if applications exploiting the porosity are to be pursued. Here, the resolution afforded by micro-Raman and micro-photoluminescence (PL) is used to elucidate the effects of porosity heterogeneity on the optical properties of individual SiNWs produced in large arrays with MACE, while also determining the spatial character of the heterogeneity. For highly porous SiNWs, there is a dramatic reduction in Raman signal and an increase in PL near the SiNW tips. PL spectra collected along the SiNW length exhibit peaks due to leaky mode resonances. Analysis of the PL resonance peaks, Raman spectrum line shape, SEM images, and EDS spectra indicate that the SiNWs possess both radial and axial heterogeneity wherein, from base to SiNW tip, the SiNWs comprise a shell of increasingly thick porous Si surrounding a tapering core of bulk Si. This work describes how structural porosity variation shapes SiNW optical properties, which will influence the design of new SiNW-based photonic devices and chemical/biological sensors.
- 24 July 2013
- Published by Wiley in Advanced Functional Materials
- Vol. 24 (1) , 106-116
Decoupling Diameter and Pitch in Silicon Nanowire Arrays Made by Metal‐Assisted Chemical Etching
The fabrication of well‐separated, narrow, and relatively smooth silicon nanowires with good periodicity is demonstrated, using non‐close‐packed arrays of nanospheres with precisely controlled diameters, pitch, and roughness. Controlled reactive ion etching in an inductively coupled plasma reduces the self‐assembled nanospheres to approximately a tenth of their original diameter, while retaining their surface smoothness and periodic placement. A titanium adhesion layer between the silicon substrate and gold film allows much thinner catalyst layers to be continuous, facilitating the film liftoff and formation of the perforated pattern without influencing catalyzed etching of silicon. Using these methods, a periodic array of silicon nanowires with a large pitch and small diameter (e.g., a 490 nm pitch and 55 nm diameter) is created, a combination not typically found in the open literature. This approach extends the types and quality of silicon nanostructures that can be fabricated using the combined nanosphere lithography and metal‐assisted chemical etching techniques.
- 24 July 2013
- Published by Wiley in Advanced Functional Materials
- Vol. 24 (1) , 106-116
Decoupling Diameter and Pitch in Silicon Nanowire Arrays Made by Metal‐Assisted Chemical Etching
The fabrication of well‐separated, narrow, and relatively smooth silicon nanowires with good periodicity is demonstrated, using non‐close‐packed arrays of nanospheres with precisely controlled diameters, pitch, and roughness. Controlled reactive ion etching in an inductively coupled plasma reduces the self‐assembled nanospheres to approximately a tenth of their original diameter, while retaining their surface smoothness and periodic placement. A titanium adhesion layer between the silicon substrate and gold film allows much thinner catalyst layers to be continuous, facilitating the film liftoff and formation of the perforated pattern without influencing catalyzed etching of silicon. Using these methods, a periodic array of silicon nanowires with a large pitch and small diameter (e.g., a 490 nm pitch and 55 nm diameter) is created, a combination not typically found in the open literature. This approach extends the types and quality of silicon nanostructures that can be fabricated using the combined nanosphere lithography and metal‐assisted chemical etching techniques.
- Open Access
- 1 May 2012
- Published by Springer Nature in Journal of Nanobiotechnology
- Vol. 10 (1) , 18
Biotemplating rod-like viruses for the synthesis of copper nanorods and nanowires
Background: In the past decade spherical and rod-like viruses have been used for the design and synthesis of new kind of nanomaterials with unique chemical positioning, shape, and dimensions in the nanosize regime. Wild type and genetic engineered viruses have served as excellent templates and scaffolds for the synthesis of hybrid materials with unique properties imparted by the incorporation of biological and organic moieties and inorganic nanoparticles. Although great advances have been accomplished, still there is a broad interest in developing reaction conditions suitable for biological templates while not limiting the material property of the product. Results: We demonstrate the controlled synthesis of copper nanorods and nanowires by electroless deposition of Cu on three types of Pd-activated rod-like viruses. Our aqueous solution-based method is scalable and versatile for biotemplating, resulting in Cu-nanorods 24–46 nm in diameter as measured by transmission electron microscopy. Cu2+ was chemically reduced onto Pd activated tobacco mosaic virus, fd and M13 bacteriophages to produce a complete and uniform Cu coverage. The Cu coating was a combination of Cu0 and Cu2O as determined by X- ray photoelectron spectroscopy analysis. A capping agent, synthesized in house, was used to disperse Cu-nanorods in aqueous and organic solvents. Likewise, reactions were developed to produce Cu-nanowires by metallization of polyaniline-coated tobacco mosaic virus. Conclusions: Synthesis conditions described in the current work are scalable and amenable for biological templates. The synthesized structures preserve the dimensions and shape of the rod-like viruses utilized during the study. The current work opens the possibility of generating a variety of nanorods and nanowires of different lengths ranging from 300 nm to micron sizes. Such biological-based materials may find ample use in nanoelectronics, sensing, and cancer therapy.
- 1 May 2012
- Published by Springer Nature in Journal of Nanobiotechnology
- Vol. 10 (1) , 18
Open AccessBiotemplating rod-like viruses for the synthesis of copper nanorods and nanowires
Background: In the past decade spherical and rod-like viruses have been used for the design and synthesis of new kind of nanomaterials with unique chemical positioning, shape, and dimensions in the nanosize regime. Wild type and genetic engineered viruses have served as excellent templates and scaffolds for the synthesis of hybrid materials with unique properties imparted by the incorporation of biological and organic moieties and inorganic nanoparticles. Although great advances have been accomplished, still there is a broad interest in developing reaction conditions suitable for biological templates while not limiting the material property of the product. Results: We demonstrate the controlled synthesis of copper nanorods and nanowires by electroless deposition of Cu on three types of Pd-activated rod-like viruses. Our aqueous solution-based method is scalable and versatile for biotemplating, resulting in Cu-nanorods 24–46 nm in diameter as measured by transmission electron microscopy. Cu2+ was chemically reduced onto Pd activated tobacco mosaic virus, fd and M13 bacteriophages to produce a complete and uniform Cu coverage. The Cu coating was a combination of Cu0 and Cu2O as determined by X- ray photoelectron spectroscopy analysis. A capping agent, synthesized in house, was used to disperse Cu-nanorods in aqueous and organic solvents. Likewise, reactions were developed to produce Cu-nanowires by metallization of polyaniline-coated tobacco mosaic virus. Conclusions: Synthesis conditions described in the current work are scalable and amenable for biological templates. The synthesized structures preserve the dimensions and shape of the rod-like viruses utilized during the study. The current work opens the possibility of generating a variety of nanorods and nanowires of different lengths ranging from 300 nm to micron sizes. Such biological-based materials may find ample use in nanoelectronics, sensing, and cancer therapy.