Santiago Otero
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Santiago Otero has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Perfecto Marino
Electronic Technology Department, University of Vigo, E.T.S.I: Industriales, Campus Lagoas-Marcosende, 36280, SPAIN
7 shared publications - Francisco Poza
Electronic Technology Department, University of Vigo, E.T.S.I: Industriales, Campus Lagoas-Marcosende, 36280, SPAIN
6 shared publications - Miguel Ángel Domı́nguez
Electronic Technology Department, University of Vigo, E.T.S.I: Industriales, Campus Lagoas-Marcosende, 36280, SPAIN
4 shared publications Francisco Poza
Digital Communications Division, Electronic Technology Department, University of Vigo, Vigo Pontevedra, Spain
2 shared publicationsPerfecto Marino
Digital Communications Division, Electronic Technology Department, University of Vigo , Vigo Pontevedra, Spain
2 shared publications- Vicente Pastoriza-Santos
AtlanTTic Research Center University de Vigo Vigo Spain
2 shared publications
Latest Publications
- 18 February 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 57 (12) , 4199-4208
Reconfigurable Industrial Sensors for Remote Condition Monitoring and Modeling
The objective of this paper is the development of a software architecture to ease access and management of data for applications with variable and configurable data sources. The purpose of this architecture is to build a configurable and flexible system where acquisition tasks are decoupled from data-access tasks. To accomplish this, the authors have implemented what they have called virtual acquisition cards , which provide a reconfigurable and dynamic view during runtime of the data required by the user applications. These data can be used by different kind of applications from diverse knowledge areas (meteorological, industrial, medical, and so on) for the analysis of behavioral models or condition monitoring. This paper introduces the architecture of the system proposed with its involved parts. Then, it details the most important parts of the system and how they work. Next, several real working applications, using the proposed architecture, are shown. A discussion about other existing commercial systems is made, and finally, future works and conclusions are presented.
- 18 February 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 57 (12) , 4199-4208
Reconfigurable Industrial Sensors for Remote Condition Monitoring and Modeling
The objective of this paper is the development of a software architecture to ease access and management of data for applications with variable and configurable data sources. The purpose of this architecture is to build a configurable and flexible system where acquisition tasks are decoupled from data-access tasks. To accomplish this, the authors have implemented what they have called virtual acquisition cards , which provide a reconfigurable and dynamic view during runtime of the data required by the user applications. These data can be used by different kind of applications from diverse knowledge areas (meteorological, industrial, medical, and so on) for the analysis of behavioral models or condition monitoring. This paper introduces the architecture of the system proposed with its involved parts. Then, it details the most important parts of the system and how they work. Next, several real working applications, using the proposed architecture, are shown. A discussion about other existing commercial systems is made, and finally, future works and conclusions are presented.
- 15 August 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 56 (2) , 589-600
Electronics in Automotive Engineering: A Top–Down Approach for Implementing Industrial Fieldbus Technologies in City Buses and Coaches
The electrical circuits and their electronic control units in city buses and coaches are essential for good performance. Drive, braking, suspension, door opening, security, and communication devices must be integrated in a reliable and real-time information system. The industrial communication networks or fieldbuses are a good solution to implement networked control systems for the onboard electronics in the public transport buses and coaches. Also, this trend of automotive electronics is being encouraged in the current European Union Framework Program (FP) (seventh FP), which is devoted to intelligent transportation systems, for facing the world's new challenges in environmental care and efficient fuel consumption among others. The authors are working in the design of multiplexed solutions based on fieldbuses to integrate the body and chassis functions of city public transport buses. An example for the EURO5 model of the Scania manufacturer is reported in this paper.
- 15 August 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 56 (2) , 589-600
Electronics in Automotive Engineering: A Top–Down Approach for Implementing Industrial Fieldbus Technologies in City Buses and Coaches
The electrical circuits and their electronic control units in city buses and coaches are essential for good performance. Drive, braking, suspension, door opening, security, and communication devices must be integrated in a reliable and real-time information system. The industrial communication networks or fieldbuses are a good solution to implement networked control systems for the onboard electronics in the public transport buses and coaches. Also, this trend of automotive electronics is being encouraged in the current European Union Framework Program (FP) (seventh FP), which is devoted to intelligent transportation systems, for facing the world's new challenges in environmental care and efficient fuel consumption among others. The authors are working in the design of multiplexed solutions based on fieldbuses to integrate the body and chassis functions of city public transport buses. An example for the EURO5 model of the Scania manufacturer is reported in this paper.
- 1 January 2008
- Published by INSTICC
- p. 452-455
APPLICATION OF A WEB-BASED EDUCATION SYSTEM IN INDUSTRIAL PROCESSES
- 1 January 2008
- Published by INSTICC
- p. 452-455
APPLICATION OF A WEB-BASED EDUCATION SYSTEM IN INDUSTRIAL PROCESSES
- 1 June 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2870-2875
Design of a Networked Control System to Integrate Vehicular Electronic Devices
The electrical circuits and their Electronic Control Units (ECUs) in buses and coaches are essential for their good working. Drive, braking, suspension, opening door, security and communication devices must be integrated in a reliable and real time information system. The industrial communication networks or fieldbuses are a good solution to implement networked control systems for the onboard electronics in the public transport buses and coaches. The authors are working in the design of multiplexed solutions based on fieldbuses to integrate the body and chassis functions of city public transport buses. An example for the EURO5 model of the Scania manufacturer is reported in this paper. The authors are also working in the implementation of new modules based on FPGAs (Field Programmable Gate Arrays) that can be used in these networked control systems.
- 1 June 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2870-2875
Design of a Networked Control System to Integrate Vehicular Electronic Devices
The electrical circuits and their Electronic Control Units (ECUs) in buses and coaches are essential for their good working. Drive, braking, suspension, opening door, security and communication devices must be integrated in a reliable and real time information system. The industrial communication networks or fieldbuses are a good solution to implement networked control systems for the onboard electronics in the public transport buses and coaches. The authors are working in the design of multiplexed solutions based on fieldbuses to integrate the body and chassis functions of city public transport buses. An example for the EURO5 model of the Scania manufacturer is reported in this paper. The authors are also working in the implementation of new modules based on FPGAs (Field Programmable Gate Arrays) that can be used in these networked control systems.
- 1 June 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in 2007 IEEE Intelligent Vehicles Symposium
- p. 1083-1088
Configuration of the Control System in Public Transport Vehicles Using Industrial Communication Networks
The electrical circuits and their Electronic Control Units (ECUs) in buses and coaches are essential for their good working. Drive, braking, suspension, door opening, security and communication devices must be integrated in a reliable and real time information system. The industrial communication networks or fieldbuses are a good solution to implement networked control systems for the onboard electronics in the public transport buses and coaches. The authors are working in the design of multiplexed solutions based on fieldbuses to integrate the body and chassis functions of city public transport buses. An example for the EURO5 model of the Scania manufacturer is reported in this paper. The authors are also working in the implementation of new modules based on FPGAs (Field Programmable Gate Arrays) that can be used in these networked control systems.
- 1 June 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in 2007 IEEE Intelligent Vehicles Symposium
- p. 1083-1088
Configuration of the Control System in Public Transport Vehicles Using Industrial Communication Networks
The electrical circuits and their Electronic Control Units (ECUs) in buses and coaches are essential for their good working. Drive, braking, suspension, door opening, security and communication devices must be integrated in a reliable and real time information system. The industrial communication networks or fieldbuses are a good solution to implement networked control systems for the onboard electronics in the public transport buses and coaches. The authors are working in the design of multiplexed solutions based on fieldbuses to integrate the body and chassis functions of city public transport buses. An example for the EURO5 model of the Scania manufacturer is reported in this paper. The authors are also working in the implementation of new modules based on FPGAs (Field Programmable Gate Arrays) that can be used in these networked control systems.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1061-1067
Communication Networks for Vehicular Electronic Devices
The electrical circuits and their electronic control units (ECUs) in buses and coaches are essential for their good working. Drive, braking, suspension, opening door, security and communication devices must be integrated in a reliable and real time information system. The industrial communication networks or fieldbuses are a good solution to implement networked control systems for the onboard electronics in the public transport buses and coaches. The authors are working in the design of multiplexed solutions based on fieldbuses to integrate the body and chassis functions of city public transport buses. An example for the EUR05 model of the Scania manufacturer is reported in this paper. The authors are also working in the implementation of new modules based on FPGAs (Field Programmable Gate Arrays) that can be used in these networked control systems.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1061-1067
Communication Networks for Vehicular Electronic Devices
The electrical circuits and their electronic control units (ECUs) in buses and coaches are essential for their good working. Drive, braking, suspension, opening door, security and communication devices must be integrated in a reliable and real time information system. The industrial communication networks or fieldbuses are a good solution to implement networked control systems for the onboard electronics in the public transport buses and coaches. The authors are working in the design of multiplexed solutions based on fieldbuses to integrate the body and chassis functions of city public transport buses. An example for the EUR05 model of the Scania manufacturer is reported in this paper. The authors are also working in the implementation of new modules based on FPGAs (Field Programmable Gate Arrays) that can be used in these networked control systems.
- 1 November 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics
- No. 1553572X,p. 585-590
Industrial Communication Systems in Technology Control for Public Transport Vehicles
The electrical circuits and installations in buses and coaches are essential for their good working. Drive, braking, suspension, opening door, security and communication systems depend on the electrical system of the vehicle. The disproportionate length of cable (about 4 Km of cables and 100 Kg of weight in a conventional installation), with more of 2,000 connections per vehicle, generates great difficult and the point-to-point links are not an effective solution. The industrial communication networks or fieldbuses are a multiplexed solution for onboard electronics in the public transport buses and coaches. The authors are working in the design and implementation of new modules based on FPGAs (field programmable gate arrays) to integrate body and chassis functions in the multiplexed solutions from manufacturers
- 1 November 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics
- No. 1553572X,p. 585-590
Industrial Communication Systems in Technology Control for Public Transport Vehicles
The electrical circuits and installations in buses and coaches are essential for their good working. Drive, braking, suspension, opening door, security and communication systems depend on the electrical system of the vehicle. The disproportionate length of cable (about 4 Km of cables and 100 Kg of weight in a conventional installation), with more of 2,000 connections per vehicle, generates great difficult and the point-to-point links are not an effective solution. The industrial communication networks or fieldbuses are a multiplexed solution for onboard electronics in the public transport buses and coaches. The authors are working in the design and implementation of new modules based on FPGAs (field programmable gate arrays) to integrate body and chassis functions in the multiplexed solutions from manufacturers
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1318-1322
Embedded sensors for industrial transformers maintenance
The condition monitoring of on-load tap changers is very important because they have proved to be the elements with noticeable failures in a power transformer. This article describes the development of a portable virtual instrument for monitoring this kind of elements. The monitoring task is based in the measurement and analysis of the vibrations that a tap change produces. In contrast with other methods that can be used, this one has the advantage of being able to do continuous monitoring because the transformer can be operated on line.
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1318-1322
Embedded sensors for industrial transformers maintenance
The condition monitoring of on-load tap changers is very important because they have proved to be the elements with noticeable failures in a power transformer. This article describes the development of a portable virtual instrument for monitoring this kind of elements. The monitoring task is based in the measurement and analysis of the vibrations that a tap change produces. In contrast with other methods that can be used, this one has the advantage of being able to do continuous monitoring because the transformer can be operated on line.
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19354576,p. 1036-1041
Distributed Sensors Network Applied to the Rain Impairment Study on Radiocommunication Systems
The performance of millimetre wavelength wireless access network technologies are significantly impaired by rain effects. To evaluate the rain effects over a communication system, it is essential to know the temporal and spatial evolution of rainfall rate. For this reason it is necessary to develop an experimental network that provides sufficient data to study and establish means to prevent and compensate for the detrimental effects of rain. In this paper, an experimental rain gauge network is presented. This network comprises weather stations capable of measuring rainfall rate, temperature and humidity. The paper describes first the experimental network for automatic data acquisition as a system based in a distributed process. The design of the experimental network is explained in detail and finally the interest for millimetre wavelength applications is pointed out.
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19354576,p. 1036-1041
Distributed Sensors Network Applied to the Rain Impairment Study on Radiocommunication Systems
The performance of millimetre wavelength wireless access network technologies are significantly impaired by rain effects. To evaluate the rain effects over a communication system, it is essential to know the temporal and spatial evolution of rainfall rate. For this reason it is necessary to develop an experimental network that provides sufficient data to study and establish means to prevent and compensate for the detrimental effects of rain. In this paper, an experimental rain gauge network is presented. This network comprises weather stations capable of measuring rainfall rate, temperature and humidity. The paper describes first the experimental network for automatic data acquisition as a system based in a distributed process. The design of the experimental network is explained in detail and finally the interest for millimetre wavelength applications is pointed out.
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Midwest Symposium on Circuits and Systems (mwscas)
- Vol. 1, 631-635
OLTC Measurements in Electrical Power Grids
The condition monitoring of on-load tap changers is very important because they have proved to be the elements with noticeable failures in a power transformer. This article describes the development of a portable virtual instrument for monitoring this kind of elements. The monitoring task is based in the measurement and analysis of the vibrations that a tap change produces. In contrast with other methods that can be used, this one has the advantage of being able to do continuous monitoring because the transformer can be operated on line.
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Midwest Symposium on Circuits and Systems (mwscas)
- Vol. 1, 631-635
OLTC Measurements in Electrical Power Grids
The condition monitoring of on-load tap changers is very important because they have proved to be the elements with noticeable failures in a power transformer. This article describes the development of a portable virtual instrument for monitoring this kind of elements. The monitoring task is based in the measurement and analysis of the vibrations that a tap change produces. In contrast with other methods that can be used, this one has the advantage of being able to do continuous monitoring because the transformer can be operated on line.