Mirco Raffetto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mirco Raffetto has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Giacomo Oliveri
Department of Civil, Environmental, and Mechanical Engineering (DICAM), ELEDIA Research Center (ELEDIA@UniTN), University of Trento, Trento, Italy
5 shared publications - Andrea Massa
DICAM - Department of Civil, Environmental, and Mechanical Engineering, ELEDIA Research Center (ELEDIA@UniTN - University of Trento), Trento, Italy
2 shared publications - Andrea F. Cattoni
University of Genova
1 shared publication - Carlo S. Regazzoni
Department of Electrical, Electronic, Telecommunications Engineering and Naval Architecture, University of Genoa, Genoa, Italy
1 shared publication Giovanni Bozza
Univ. of Genoa, Genoa
1 shared publication- Marco Briasco
Department of Biophysical and Electronic Engineering, University of Genoa, via Opera Pia 11a, I-16145, Genoa, Italy. Phone: +39 0103532796, Fax: +39 0103532245
1 shared publication
Latest Publications
- 30 June 2015
- Published by EDP Sciences in ESAIM: Mathematical Modelling and Numerical Analysis
- Vol. 49 (4) , 1157-1192
Well posedness and finite element approximability of two-dimensional time-harmonic electromagnetic problems involving non-conducting moving objects with stationary boundaries
A set of sufficient conditions for the well-posedness and the convergence of the finite element approximation of two-dimensional time-harmonic electromagnetic boundary value problems involving non-conducting moving objects with stationary boundaries is provided for the first time to the best of authors’s knowledge. The set splits into two parts. The first of these is made up of traditional conditions, which are not restrictive for practical applications and define the usual requirements for the domain, its boundary, its subdomains and their boundaries, the boundary conditions and the constitutive parameters. The second part consists of conditions which are specific for the problems at hand. In particular, these conditions are expressed in terms of the constitutive parameters of the media involved and of the velocity field. It is shown that it is not difficult to check the validity of these conditions and that they hold true for broad classes of practically important problems which involve axially moving media.
- 30 June 2015
- Published by EDP Sciences in ESAIM: Mathematical Modelling and Numerical Analysis
- Vol. 49 (4) , 1157-1192
Well posedness and finite element approximability of two-dimensional time-harmonic electromagnetic problems involving non-conducting moving objects with stationary boundaries
A set of sufficient conditions for the well-posedness and the convergence of the finite element approximation of two-dimensional time-harmonic electromagnetic boundary value problems involving non-conducting moving objects with stationary boundaries is provided for the first time to the best of authors’s knowledge. The set splits into two parts. The first of these is made up of traditional conditions, which are not restrictive for practical applications and define the usual requirements for the domain, its boundary, its subdomains and their boundaries, the boundary conditions and the constitutive parameters. The second part consists of conditions which are specific for the problems at hand. In particular, these conditions are expressed in terms of the constitutive parameters of the media involved and of the velocity field. It is shown that it is not difficult to check the validity of these conditions and that they hold true for broad classes of practically important problems which involve axially moving media.
- 12 July 2012
- Published by Oxford University Press (OUP) in IMA Journal of Applied Mathematics
- Vol. 79 (1) , 54-93
Regularity of time-harmonic electromagnetic fields in the interior of bianisotropic materials and metamaterials
The regularity of the four time-harmonic vector fields composing any strong solution of the system obtained from Maxwell's curl equations and the constitutive relations in the interior of an inhomogeneous bianisotropic material are investigated. The results are given as interior Sobolev or Hölder regularity. Possible local C∞ regularity or local analyticity of the four vector fields are discussed, too. Each of these regularity results is obtained under specific conditions on the impressed current densities and on the constitutive parameters of the bianisotropic material considered, but it is shown that such conditions do not significantly limit the coverage of our analysis in terms of applications.
- 12 July 2012
- Published by Oxford University Press (OUP) in IMA Journal of Applied Mathematics
- Vol. 79 (1) , 54-93
Regularity of time-harmonic electromagnetic fields in the interior of bianisotropic materials and metamaterials
The regularity of the four time-harmonic vector fields composing any strong solution of the system obtained from Maxwell's curl equations and the constitutive relations in the interior of an inhomogeneous bianisotropic material are investigated. The results are given as interior Sobolev or Hölder regularity. Possible local C∞ regularity or local analyticity of the four vector fields are discussed, too. Each of these regularity results is obtained under specific conditions on the impressed current densities and on the constitutive parameters of the bianisotropic material considered, but it is shown that such conditions do not significantly limit the coverage of our analysis in terms of applications.
- 1 October 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 646-649
Accuracy of Finite Difference Frequency Domain Methods in the Presence of Effective Metamaterials
It has been recently shown that frequency domain finite element methods can provide unsatisfactory results in the presence of effective models of metamaterials. This contribution shows that finite difference frequency domain method is not affected by the same inconvenient. A qualitative explanation of such a different behaviour is provided.
- 1 October 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 646-649
Accuracy of Finite Difference Frequency Domain Methods in the Presence of Effective Metamaterials
It has been recently shown that frequency domain finite element methods can provide unsatisfactory results in the presence of effective models of metamaterials. This contribution shows that finite difference frequency domain method is not affected by the same inconvenient. A qualitative explanation of such a different behaviour is provided.
- 5 March 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 56 (3) , 792-798
A Warning About Metamaterials for Users of Frequency-Domain Numerical Simulators
It is shown that users of frequency-domain numerical simulators should be warned of the danger of using models with adjacent complementary media since such a configuration of materials can be a cause of a numerical instability which cannot be overcome by the presence of other lossy media or absorbing boundary conditions. The physical realizability at any frequency of models considering complementary media with sharp interfaces is then questioned by the contradiction between the deduced result and the one which holds true when the actual dielectric structure of metamaterials is considered.
- 5 March 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 56 (3) , 792-798
A Warning About Metamaterials for Users of Frequency-Domain Numerical Simulators
It is shown that users of frequency-domain numerical simulators should be warned of the danger of using models with adjacent complementary media since such a configuration of materials can be a cause of a numerical instability which cannot be overcome by the presence of other lossy media or absorbing boundary conditions. The physical realizability at any frequency of models considering complementary media with sharp interfaces is then questioned by the contradiction between the deduced result and the one which holds true when the actual dielectric structure of metamaterials is considered.
- 1 September 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 802-805
A simple but numerically unmanageable frequency-domain waveguide discontinuity problem
It is shown that it is possible to define an almost trivial frequency-domain waveguide discontinuity problem which cannot be reliably solved by frequency-domain numerical simulators. This happens when among the media involved in the problems of interest there are metamaterials described in terms of effective constitutive parameters. As a consequence, the results of (frequency-domain) numerical simulators should not be taken for granted unless restrictive hypotheses on the media involved are taken into account.
- 1 September 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 802-805
A simple but numerically unmanageable frequency-domain waveguide discontinuity problem
It is shown that it is possible to define an almost trivial frequency-domain waveguide discontinuity problem which cannot be reliably solved by frequency-domain numerical simulators. This happens when among the media involved in the problems of interest there are metamaterials described in terms of effective constitutive parameters. As a consequence, the results of (frequency-domain) numerical simulators should not be taken for granted unless restrictive hypotheses on the media involved are taken into account.
- 8 August 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 17 (8) , 565-567
Cavities Involving Metamaterials With an Uncountable Set of Resonant Frequencies
In this letter, it is shown that cavity resonators involving lossless and nondispersive (in a frequency band) double negative metamaterials can behave in a completely different way with respect to the cavities involving only traditional nondispersive double positive media. More precisely, it is proven that resonators with only nondispersive media may have an uncountable set of resonant frequencies. As practical consequences, it is outlined that this fact can represent an unsurmountable difficulty for present-day numerical simulators of electromagnetic eigenproblems and a cause of troubles for numerical solvers of electromagnetic driven problems. The presented result should warn users of numerical simulators against the employment of simplified models of metamaterials.
- 8 August 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 17 (8) , 565-567
Cavities Involving Metamaterials With an Uncountable Set of Resonant Frequencies
In this letter, it is shown that cavity resonators involving lossless and nondispersive (in a frequency band) double negative metamaterials can behave in a completely different way with respect to the cavities involving only traditional nondispersive double positive media. More precisely, it is proven that resonators with only nondispersive media may have an uncountable set of resonant frequencies. As practical consequences, it is outlined that this fact can represent an unsurmountable difficulty for present-day numerical simulators of electromagnetic eigenproblems and a cause of troubles for numerical solvers of electromagnetic driven problems. The presented result should warn users of numerical simulators against the employment of simplified models of metamaterials.
- 1 August 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21665370,p. 251-257
Neural Networks Mode Classification based on Frequency Distribution Features
The growing number of new emerging wireless standards is creating regulatory problems in allocating the unlicensed frequencies. A possible solution for increasing the frequency re-usage within the framework of info-mobility cellular systems is the joint exploitation of Smart Antennas and Cognitive Radio. In the paper a Mode Identification algorithm, based on frequency distribution features and multiple neural network classifiers, for a Cognitive Base Transceiver Station is presented. Simulated results, obtained in a simplified framework, will prove the effectiveness of the proposed approach.
- 1 August 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21665370,p. 251-257
Neural Networks Mode Classification based on Frequency Distribution Features
The growing number of new emerging wireless standards is creating regulatory problems in allocating the unlicensed frequencies. A possible solution for increasing the frequency re-usage within the framework of info-mobility cellular systems is the joint exploitation of Smart Antennas and Cognitive Radio. In the paper a Mode Identification algorithm, based on frequency distribution features and multiple neural network classifiers, for a Cognitive Base Transceiver Station is presented. Simulated results, obtained in a simplified framework, will prove the effectiveness of the proposed approach.
- 1 September 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1225-1228
Synthesis of Double-Negative Materials by using Dielectric-Loaded Rectangular Waveguides
In this contribution a new method of designing a double negative (DNG) material is proposed. It is based on the propagation properties of rectangular waveguides under cut-off and on the possibility of obtaining single-negative (SNG) effective properties with simple-structured dielectric composite materials. The propagation properties are then numerically investigated by using a three-dimensional finite-element (FE) simulator
- 1 September 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1225-1228
Synthesis of Double-Negative Materials by using Dielectric-Loaded Rectangular Waveguides
In this contribution a new method of designing a double negative (DNG) material is proposed. It is based on the propagation properties of rectangular waveguides under cut-off and on the possibility of obtaining single-negative (SNG) effective properties with simple-structured dielectric composite materials. The propagation properties are then numerically investigated by using a three-dimensional finite-element (FE) simulator
- 1 October 2003
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 143-146
Impact of distributed computing on the performances of microwave CAD tools
In this paper the potential impact of distributed computing on the performances of microwave CAD tools is analysed. A possible implementation of an evolutionary based parallel CAD tool is provided and a numerical assessment of its performances is carried out.
- 1 October 2003
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 143-146
Impact of distributed computing on the performances of microwave CAD tools
In this paper the potential impact of distributed computing on the performances of microwave CAD tools is analysed. A possible implementation of an evolutionary based parallel CAD tool is provided and a numerical assessment of its performances is carried out.