Jun Song
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Jun Song has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
Fuyan Chen
Shandong Jiaotong Univ, Sch Civil Engn, Jinan, Shandong, Peoples R China
3 shared publicationsGuangxiu Guo
School of Civil Engineering, Ludong University, Yantai, Shandong, PR China
2 shared publicationsBaoliang Wang
Southwest Geotech & Design Inst China Nucl Ind, Chengdu, Sichuan, Peoples R China
1 shared publication- Chen Zengshun
School of Civil Engineering & Architecture Chongqing Jiaotong University Chongqing China
1 shared publication - Chuanqin Pang
Shandong Provincial Key Laboratory of Intelligent Construction and Operation & Maintenance for Highway Transportation Infrastructure, Jinan 250101, China
1 shared publication Fangping Liu
Chongqing Jiaotong University(Chongqing Jiaotong University),Chongqing,China
1 shared publication
Latest Publications
- Open Access
Road Performance of Polyurethane Mixtures and Load Response Behaviors of Typical Polyurethane Pavement Structures
In order to clarify the road performance and load response behavior of polyurethane mixtures, a low-temperature bending test, dynamic modulus test, rutting test, Hamburg rutting test, and four-point bending fatigue test were conducted on multi-crushed stone polyurethane concrete (SPC-16) and polyurethane concrete (PC-20) as the test objects, and the results were compared with the road performance of an asphalt mastic crushed stone mixture (SMA-13). The differences in the load response between two typical polyurethane mixture pavement structures and a typical asphalt pavement structure were analyzed under four working conditions: a normal-temperature standard load, normal-temperature heavy load, high-temperature standard load, and high-temperature heavy load. The results showed that the low-temperature flexural tensile strength of the polyurethane mixture was 1.3–1.7-times that of SMA-13, the maximum flexural tensile strain was 1.1–1.8-times that of SMA-13, the dynamic stability of the polyurethane mixture was more than 15-times that of SMA-13, and the fatigue life of the polyurethane mixture was 8–12-times that of SMA-13. The surface deflection, base stress, and surface strain of the typical asphalt pavement structures and two typical polyurethane mixture pavement structures at the same temperature all increased with an increase in the load. The load response of the polyurethane mixture pavement structures under high-temperature conditions was relatively stable.
Open AccessRoad Performance of Polyurethane Mixtures and Load Response Behaviors of Typical Polyurethane Pavement Structures
In order to clarify the road performance and load response behavior of polyurethane mixtures, a low-temperature bending test, dynamic modulus test, rutting test, Hamburg rutting test, and four-point bending fatigue test were conducted on multi-crushed stone polyurethane concrete (SPC-16) and polyurethane concrete (PC-20) as the test objects, and the results were compared with the road performance of an asphalt mastic crushed stone mixture (SMA-13). The differences in the load response between two typical polyurethane mixture pavement structures and a typical asphalt pavement structure were analyzed under four working conditions: a normal-temperature standard load, normal-temperature heavy load, high-temperature standard load, and high-temperature heavy load. The results showed that the low-temperature flexural tensile strength of the polyurethane mixture was 1.3–1.7-times that of SMA-13, the maximum flexural tensile strain was 1.1–1.8-times that of SMA-13, the dynamic stability of the polyurethane mixture was more than 15-times that of SMA-13, and the fatigue life of the polyurethane mixture was 8–12-times that of SMA-13. The surface deflection, base stress, and surface strain of the typical asphalt pavement structures and two typical polyurethane mixture pavement structures at the same temperature all increased with an increase in the load. The load response of the polyurethane mixture pavement structures under high-temperature conditions was relatively stable.
- 1 January 2023
- Published by ACTA Press in International Journal of Robotics and Automation
- Vol. 38 (1) , 13-19
ANALYSIS OF THE DAMAGE COUPLING MODEL OF REINFORCED CONCRETE BEAMS BASED ON COMSOL, 13-19.
This article addresses the problem of corrosion damage of reinforcingbars inside reinforced concrete girders and develops a magneticmemory effect-based research of reinforcing bar damage insidebridges.
- 1 January 2023
- Published by ACTA Press in International Journal of Robotics and Automation
- Vol. 38 (1) , 13-19
ANALYSIS OF THE DAMAGE COUPLING MODEL OF REINFORCED CONCRETE BEAMS BASED ON COMSOL, 13-19.
This article addresses the problem of corrosion damage of reinforcingbars inside reinforced concrete girders and develops a magneticmemory effect-based research of reinforcing bar damage insidebridges.
- 29 August 2021
- Published by Taylor & Francis in Waves in Random and Complex Media
- Vol. 34 (4) , 2654-2685
Analytical modeling of the linear and nonlinear dynamic characteristics of the non-uniform axially functionally graded cylindrical beam based on the strain gradient theory
In this research, the nonlinear vibration behavior of axially functionally graded (AFG) nano-scale truncated conical tubes (with non-uniform cross-section), including the porosity, is presented for the first time based on the Euler-Bernoulli beam theory and the von-Kármán’s nonlinear strain-displacement and nonlinear nonlocal boundary conditions. The effect of being at the tapered nanosize model is supposedly based on the nonlocal strain gradient theory using the Hamilton principle to extract the equation of motions and nonlinear time-dependent nonlocal boundary conditions. The material properties and thickness of nano-tube are varying along the length of tubes. The generalized differential quadrature method (GDQM) is utilized with the iteration method to solve the complicated nonlinear equations. The numerical results in tabular and graphical styles present for various nonlinear amplitudes, the AFG power indexes, the rate of the cross-section change, the porosity parameter, and the nonlocal gradient strain parameter for both simply supported, fully clamped, and simply supported-clamped boundary conditions in detail.
- 29 August 2021
- Published by Taylor & Francis in Waves in Random and Complex Media
- Vol. 34 (4) , 2654-2685
Analytical modeling of the linear and nonlinear dynamic characteristics of the non-uniform axially functionally graded cylindrical beam based on the strain gradient theory
In this research, the nonlinear vibration behavior of axially functionally graded (AFG) nano-scale truncated conical tubes (with non-uniform cross-section), including the porosity, is presented for the first time based on the Euler-Bernoulli beam theory and the von-Kármán’s nonlinear strain-displacement and nonlinear nonlocal boundary conditions. The effect of being at the tapered nanosize model is supposedly based on the nonlocal strain gradient theory using the Hamilton principle to extract the equation of motions and nonlinear time-dependent nonlocal boundary conditions. The material properties and thickness of nano-tube are varying along the length of tubes. The generalized differential quadrature method (GDQM) is utilized with the iteration method to solve the complicated nonlinear equations. The numerical results in tabular and graphical styles present for various nonlinear amplitudes, the AFG power indexes, the rate of the cross-section change, the porosity parameter, and the nonlocal gradient strain parameter for both simply supported, fully clamped, and simply supported-clamped boundary conditions in detail.
- 3 May 2020
- Published by Taylor & Francis in Integrated Ferroelectrics
- Vol. 207 (1) , 27-36
Corrosion and Microstructure Behaviour of Steel Strand Used in Bridges
The corrosion and microstructure behavior features, such as steel strand corrosion and corrosive wear of the as-prepared composite coatings and substrates were investigated. It is found that the experimental pitting depth followed a normal distribution and both the location and scale parameters increased with the corrosion degree. The fatigue test results indicated that corrosion could cause a significant decrease in the fatigue life of corroded steel wires. The substrate exhibited corrosion-accelerating wear, while the coatings exhibited wear accelerating corrosion. A method based on 3D measurements and AFGROW software was proposed to predict the remaining fatigue life of corroded steel wires. The predicted fatigue lives agreed well with the test results.
- 3 May 2020
- Published by Taylor & Francis in Integrated Ferroelectrics
- Vol. 207 (1) , 27-36
Corrosion and Microstructure Behaviour of Steel Strand Used in Bridges
The corrosion and microstructure behavior features, such as steel strand corrosion and corrosive wear of the as-prepared composite coatings and substrates were investigated. It is found that the experimental pitting depth followed a normal distribution and both the location and scale parameters increased with the corrosion degree. The fatigue test results indicated that corrosion could cause a significant decrease in the fatigue life of corroded steel wires. The substrate exhibited corrosion-accelerating wear, while the coatings exhibited wear accelerating corrosion. A method based on 3D measurements and AFGROW software was proposed to predict the remaining fatigue life of corroded steel wires. The predicted fatigue lives agreed well with the test results.
- 3 May 2020
- Published by Taylor & Francis in Integrated Ferroelectrics
- Vol. 207 (1) , 12-26
Research on Self-Healing Technology of SBS Modified Asphalt Concrete under the Dynamic Loading
Asphalt-based composites have the ability to heal themselves.without the aid of external influences (energy supply or material supplement), the self-healing ability of asphalt mixture is quite limited. In this paper, the efficiency of self-healing of asphalt mixture with Ni-Zn ferrite powders was analyzed based on the concept of microwave heating. We focused on assessing the characteristics of polyurethane (PU), base or styrene-butadiene-styrene (SBS) modified asphalt and its mixtures. The recovery rate of stiffness modulus and the fatigue life extension ratio were adopted to evaluate the self-healing efficiency of asphalt mixture. The analysis results proved that Ni-Zn ferrite powders can promote the self-healing ability of asphalt mixture significantly, the fatigue life extension ratio of 50% damaged ferrite-filled asphalt mixture can reach 1.33.
- 3 May 2020
- Published by Taylor & Francis in Integrated Ferroelectrics
- Vol. 207 (1) , 12-26
Research on Self-Healing Technology of SBS Modified Asphalt Concrete under the Dynamic Loading
Asphalt-based composites have the ability to heal themselves.without the aid of external influences (energy supply or material supplement), the self-healing ability of asphalt mixture is quite limited. In this paper, the efficiency of self-healing of asphalt mixture with Ni-Zn ferrite powders was analyzed based on the concept of microwave heating. We focused on assessing the characteristics of polyurethane (PU), base or styrene-butadiene-styrene (SBS) modified asphalt and its mixtures. The recovery rate of stiffness modulus and the fatigue life extension ratio were adopted to evaluate the self-healing efficiency of asphalt mixture. The analysis results proved that Ni-Zn ferrite powders can promote the self-healing ability of asphalt mixture significantly, the fatigue life extension ratio of 50% damaged ferrite-filled asphalt mixture can reach 1.33.
- 1 February 2019
- Published by American Scientific Publishers in Science of Advanced Materials
- Vol. 11 (2) , 291-298
Experimental Research on Corrosion Fatigue of Steel Strands in a Salt Fog Environment
A salt fog environment is a severe problem for stay cables of long-span cable-stayed bridges. This paper studies the salt fog corrosion influences for parallel-wire stay cables. First, accelerated corrosion tests were conducted using acetic acid salt spray for exposure periods from 1 d to 60 d; subsequently, a multiparameter reference model for corrosion stress was employed to describe the influence of corrosion of steel wires. Fatigue damage evolution models of multistep loading were then used to establish recursion formulas for the probabilistic character of the fatigue life of parallel-wire stay cables. The results indicate that the fraction of wires with short fatigue lives dominates the fatigue life of the stay cable. The corrosion effects on fatigue life for both steel wires and stay cables are nearly the same. Although the variance of fatigue life of the stay cable is much smaller than that of the steel wire, the fatigue performance of the stay cable becomes stable. Compared with no-stress and alternating stress, the change is less obvious under static stress. Therefore, to prevent premature fatigue failures of parallel-wire stay cables, avoiding corrosion in the steel wires during the in-service period is crucial.
- 1 February 2019
- Published by American Scientific Publishers in Science of Advanced Materials
- Vol. 11 (2) , 291-298
Experimental Research on Corrosion Fatigue of Steel Strands in a Salt Fog Environment
A salt fog environment is a severe problem for stay cables of long-span cable-stayed bridges. This paper studies the salt fog corrosion influences for parallel-wire stay cables. First, accelerated corrosion tests were conducted using acetic acid salt spray for exposure periods from 1 d to 60 d; subsequently, a multiparameter reference model for corrosion stress was employed to describe the influence of corrosion of steel wires. Fatigue damage evolution models of multistep loading were then used to establish recursion formulas for the probabilistic character of the fatigue life of parallel-wire stay cables. The results indicate that the fraction of wires with short fatigue lives dominates the fatigue life of the stay cable. The corrosion effects on fatigue life for both steel wires and stay cables are nearly the same. Although the variance of fatigue life of the stay cable is much smaller than that of the steel wire, the fatigue performance of the stay cable becomes stable. Compared with no-stress and alternating stress, the change is less obvious under static stress. Therefore, to prevent premature fatigue failures of parallel-wire stay cables, avoiding corrosion in the steel wires during the in-service period is crucial.
- Open Access
- 31 July 2015
- Published by Bentham Science Publishers Ltd. in The Open Civil Engineering Journal
- Vol. 9 (1) , 442-449
Failure Modes Analysis of Stone Arch Bridges
Failure Modes Analysis of Stone Arch Bridges
- 31 July 2015
- Published by Bentham Science Publishers Ltd. in The Open Civil Engineering Journal
- Vol. 9 (1) , 442-449
Open AccessFailure Modes Analysis of Stone Arch Bridges
Failure Modes Analysis of Stone Arch Bridges
- 1 December 2013
- Published by Tech Science Press in Intelligent Automation and Soft Computing
- Vol. 19 (4) , 581-588
Study of Tower Surface Crack Size Effect Based on Weibull Theory
This paper presents the evaluation of safety state of for tower surface with Weibull and Fractal theory which simulate stress situation of the different scales on the cable-stayed tower surface with PFC. The combination of the Weibull theory and the Fractal theory evaluated the crack condition on the surface of the cable-stayed tower. Calculation results of three specimens showed that the number of the cracks increased when the load step and surface size increased. At the same time, the largest size of specimen had the biggest fractal dimension. The discrete element numerical simulation shows that Weibull modulus was successfully used to evaluate the crack extension of the cable bent tower. © 2013 TSI® Press.
- 1 December 2013
- Published by Tech Science Press in Intelligent Automation and Soft Computing
- Vol. 19 (4) , 581-588
Study of Tower Surface Crack Size Effect Based on Weibull Theory
This paper presents the evaluation of safety state of for tower surface with Weibull and Fractal theory which simulate stress situation of the different scales on the cable-stayed tower surface with PFC. The combination of the Weibull theory and the Fractal theory evaluated the crack condition on the surface of the cable-stayed tower. Calculation results of three specimens showed that the number of the cracks increased when the load step and surface size increased. At the same time, the largest size of specimen had the biggest fractal dimension. The discrete element numerical simulation shows that Weibull modulus was successfully used to evaluate the crack extension of the cable bent tower. © 2013 TSI® Press.
- Open Access
- 3 March 2013
- Published by Canadian Center of Science and Education in Modern Applied Science
- Vol. 7 (4) , p41
Based on the Theory of Reliability High Piers Short Towers Cable-Stayed Bridge Characteristic Parameter Analysis
In view of high pier extradosed cable-stayed bridge structure characteristics, Yunnan Nanpangjiang River Bridge is taken as an example. This paper studies the influence of parameter change on the structure of the main girder by adjusting the girder height, cable tower height, bending stiffness and the cable tower pier stiffness. It can help us understand mechanical properties of the structure so as to estimate safety evaluation when the structure parameters are changed. Furthermore, it can provide the reference for economic and reasonable structure form design in the bridge of safety evaluation. It also can evaluate the safety of girder and tower through reliability theory. The result shows that the application of reliability theory is reliable and practical to evaluate the high pier extradosed cable-stayed bridge safety performance.
- 3 March 2013
- Published by Canadian Center of Science and Education in Modern Applied Science
- Vol. 7 (4) , p41
Open AccessBased on the Theory of Reliability High Piers Short Towers Cable-Stayed Bridge Characteristic Parameter Analysis
In view of high pier extradosed cable-stayed bridge structure characteristics, Yunnan Nanpangjiang River Bridge is taken as an example. This paper studies the influence of parameter change on the structure of the main girder by adjusting the girder height, cable tower height, bending stiffness and the cable tower pier stiffness. It can help us understand mechanical properties of the structure so as to estimate safety evaluation when the structure parameters are changed. Furthermore, it can provide the reference for economic and reasonable structure form design in the bridge of safety evaluation. It also can evaluate the safety of girder and tower through reliability theory. The result shows that the application of reliability theory is reliable and practical to evaluate the high pier extradosed cable-stayed bridge safety performance.