Eric Gagnon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Eric Gagnon has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- André Desbiens
Université Laval
6 shared publications - Alexandre Vachon
Numérica Technologies Inc., Quebec, QC G2E 4P8, Canada
2 shared publications - Daniel Hodouin
Department of Mining, Metallurgical and Materials Engineering, Laval University, Quebec, QC G1V 0A6, Canada
2 shared publications - Yanick Beaudoin
Département de génie électrique et génie informatique, Université Laval, Quebec, QC G1V 0A6, Canada
2 shared publications Carole G. Prévost
Université Laval, Québec, Québec G1V 0A6, Canada
1 shared publicationCarole Gabrielle Prévost
1 shared publication
Latest Publications
- Open Access
Data Fusion Architectures for Orthogonal Redundant Inertial Measurement Units
This work looks at the exploitation of large numbers of orthogonal redundant inertial measurement units. Specifically, the paper analyses centralized and distributed architectures in the context of data fusion algorithms for those sensors. For both architectures, data fusion algorithms based on Kalman filter are developed. Some of those algorithms consider sensors location, whereas the others do not, but all estimate the sensors bias. A fault detection algorithm, based on residual analysis, is also proposed. Monte-Carlo simulations show better performance for the centralized architecture with an algorithm considering sensors location. Due to a better estimation of the sensors bias, the latter provides the most precise and accurate estimates and the best fault detection. However, it requires a much longer computational time. An analysis of the sensors bias correlation is also done. Based on the simulations, the biases correlation has a small effect on the attitude rate estimation, but a very significant one on the acceleration estimation.
Open AccessData Fusion Architectures for Orthogonal Redundant Inertial Measurement Units
This work looks at the exploitation of large numbers of orthogonal redundant inertial measurement units. Specifically, the paper analyses centralized and distributed architectures in the context of data fusion algorithms for those sensors. For both architectures, data fusion algorithms based on Kalman filter are developed. Some of those algorithms consider sensors location, whereas the others do not, but all estimate the sensors bias. A fault detection algorithm, based on residual analysis, is also proposed. Monte-Carlo simulations show better performance for the centralized architecture with an algorithm considering sensors location. Due to a better estimation of the sensors bias, the latter provides the most precise and accurate estimates and the best fault detection. However, it requires a much longer computational time. An analysis of the sensors bias correlation is also done. Based on the simulations, the biases correlation has a small effect on the attitude rate estimation, but a very significant one on the acceleration estimation.
- Open Access
Satellite Launcher Navigation with One Versus Three IMUs: Sensor Positioning and Data Fusion Model Analysis
Using multiple IMUs allows both their distribution along vehicle structures and a reliance on integration methods, which is not possible with a single IMU. This paper addresses the issue of relying on three IMUs instead of only one of a higher quality in the context of a satellite launcher. The impact of the IMU positions was tested by comparing collocated IMUs against IMUs installed in the head of each launcher stage. For multi-IMU configurations, three integration methods were tested: all IMUs fused in a single INS, multiple INSs fused in a stacked filter, and multiple INSs fused in a stacked filter with geometrical constraints. All navigation solutions were aided by a three-axis attitude reference sensor and were tested with and without a GPS receiver. The results show that distributing IMUs along the launcher structure does not improve navigation performances compared to having them collocated. The fusion of multiple IMUs in one INS provides equivalent results as one IMU. However, fusing multiple INSs greatly reduces estimation errors. Performances are further improved with the addition of geometrical constraints. During long GPS outages, relative velocity and position constraints should not be exploited, as they may lead to filter divergence.
Open AccessSatellite Launcher Navigation with One Versus Three IMUs: Sensor Positioning and Data Fusion Model Analysis
Using multiple IMUs allows both their distribution along vehicle structures and a reliance on integration methods, which is not possible with a single IMU. This paper addresses the issue of relying on three IMUs instead of only one of a higher quality in the context of a satellite launcher. The impact of the IMU positions was tested by comparing collocated IMUs against IMUs installed in the head of each launcher stage. For multi-IMU configurations, three integration methods were tested: all IMUs fused in a single INS, multiple INSs fused in a stacked filter, and multiple INSs fused in a stacked filter with geometrical constraints. All navigation solutions were aided by a three-axis attitude reference sensor and were tested with and without a GPS receiver. The results show that distributing IMUs along the launcher structure does not improve navigation performances compared to having them collocated. The fusion of multiple IMUs in one INS provides equivalent results as one IMU. However, fusing multiple INSs greatly reduces estimation errors. Performances are further improved with the addition of geometrical constraints. During long GPS outages, relative velocity and position constraints should not be exploited, as they may lead to filter divergence.
- 1 November 2016
- Published by American Society of Civil Engineers (ASCE) in Journal of Aerospace Engineering
- Vol. 29 (6)
Efficiency Analysis of Canards-Based Course Correction Fuze for a 155-mm Spin-Stabilized Projectile
There are many course correction fuze concepts for improving the precision of a spin-stabilized projectile. Some of them consist in a despun fuze equipped with canards. Canards provide continuous and, possibly, modulable maneuvering capabilities in crossrange and downrange. This paper analyzes the efficiency of this type of course correction fuze and determines the best configuration for the canards. To do so, four concepts of canards-based course correction fuze are proposed and tested. To properly operate the fuzes, a guidance algorithm, based on point-of-impact prediction, and two autopilots, a poles/zeros cancellation controller and a proportional integrator controller, are developed. The fuzes efficiency is studied with their control authority footprint and achieved performances during Monte-Carlo simulations. All the tests are done with a pseudo-seven-degrees-of-freedom simulator including the developed algorithms. Those tests demonstrate that the four concepts significantly improve the precision of a spin-stabilized projectile and that, with the proposed algorithms, the best precision is obtained when the canards directly handle the projectile longitudinal acceleration.
- 1 November 2016
- Published by American Society of Civil Engineers (ASCE) in Journal of Aerospace Engineering
- Vol. 29 (6)
Efficiency Analysis of Canards-Based Course Correction Fuze for a 155-mm Spin-Stabilized Projectile
There are many course correction fuze concepts for improving the precision of a spin-stabilized projectile. Some of them consist in a despun fuze equipped with canards. Canards provide continuous and, possibly, modulable maneuvering capabilities in crossrange and downrange. This paper analyzes the efficiency of this type of course correction fuze and determines the best configuration for the canards. To do so, four concepts of canards-based course correction fuze are proposed and tested. To properly operate the fuzes, a guidance algorithm, based on point-of-impact prediction, and two autopilots, a poles/zeros cancellation controller and a proportional integrator controller, are developed. The fuzes efficiency is studied with their control authority footprint and achieved performances during Monte-Carlo simulations. All the tests are done with a pseudo-seven-degrees-of-freedom simulator including the developed algorithms. Those tests demonstrate that the four concepts significantly improve the precision of a spin-stabilized projectile and that, with the proposed algorithms, the best precision is obtained when the canards directly handle the projectile longitudinal acceleration.
- 17 July 2014
- Published by Springer Nature in Multibody System Dynamics
- Vol. 35 (1) , 63-89
Estimating the orientation of a rigid body moving in space using inertial sensors
- 17 July 2014
- Published by Springer Nature in Multibody System Dynamics
- Vol. 35 (1) , 63-89
Estimating the orientation of a rigid body moving in space using inertial sensors
- 1 January 2011
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 44 (1) , 11815-11820
UAV Optimal Obstacle Avoidance while Respecting Target Arrival Specifications
- 1 January 2011
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 44 (1) , 11815-11820
UAV Optimal Obstacle Avoidance while Respecting Target Arrival Specifications
- 1 January 2011
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Guidance, Control, and Dynamics
- Vol. 34 (1) , 29-43
Unmanned Aerial Vehicle Optimal Cooperative Obstacle Avoidance in a Stochastic Dynamic Environment
- 1 January 2011
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Guidance, Control, and Dynamics
- Vol. 34 (1) , 29-43
Unmanned Aerial Vehicle Optimal Cooperative Obstacle Avoidance in a Stochastic Dynamic Environment