Zhiyong Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Zhiyong Li has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
- Rongqing Tan
Aerospace Information Research Institute, Chinese Academy of Sciences (AIRCAS), Beijing 100094, China
7 shared publications - Fangjin Ning
Laser Engineering Center, Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing 100094, China
4 shared publications - Wenning Xu
Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing 100094, China
4 shared publications Tan Rongqing
3 shared publications- Changjun Ke
Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing 100094, China
2 shared publications - Guochang Wang
Laser Engineering Center, Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing 100094, China
2 shared publications
Latest Publications
- Open Access
Pulsed Diode-Pumped Alkali Vapor Lasers: State of the Art, Open Challenges, and Future Architectures
Diode-pumped alkali vapor lasers (DPALs) offer high quantum efficiency, low thermal loading, excellent beam quality, and emission wavelengths matched to important application scenarios. Extending DPALs toward pulsed regimes is of particular interest for applications such as lidar, free-space optical communication, and precision material processing, where high peak power and flexible temporal control are required. This review surveys the key technologies underlying DPAL systems and summarizes the progress in pulsed-generation approaches. The pulsed techniques reported to date are systematically reviewed, including pump modulation, intracavity modulation, cavity dumping, and mode-locking, together with a comparison of their performance. The current status indicates that pulsed DPALs remain at an early stage, with limitations in parameter space exploration and performance scaling. Future developments are expected along several directions, including further exploration of mode-locked DPALs, burst-mode pulse generation for structured temporal output, power scaling through MOPA architectures, and spectral extension via nonlinear frequency conversion. These directions collectively define the pathway toward high-performance pulsed DPAL systems.
Open AccessPulsed Diode-Pumped Alkali Vapor Lasers: State of the Art, Open Challenges, and Future Architectures
Diode-pumped alkali vapor lasers (DPALs) offer high quantum efficiency, low thermal loading, excellent beam quality, and emission wavelengths matched to important application scenarios. Extending DPALs toward pulsed regimes is of particular interest for applications such as lidar, free-space optical communication, and precision material processing, where high peak power and flexible temporal control are required. This review surveys the key technologies underlying DPAL systems and summarizes the progress in pulsed-generation approaches. The pulsed techniques reported to date are systematically reviewed, including pump modulation, intracavity modulation, cavity dumping, and mode-locking, together with a comparison of their performance. The current status indicates that pulsed DPALs remain at an early stage, with limitations in parameter space exploration and performance scaling. Future developments are expected along several directions, including further exploration of mode-locked DPALs, burst-mode pulse generation for structured temporal output, power scaling through MOPA architectures, and spectral extension via nonlinear frequency conversion. These directions collectively define the pathway toward high-performance pulsed DPAL systems.
- Open Access
Simulations and Experiments on Activation of Doped Silicon Wafers Based on Dual Beam of 785 nm Semiconductor Laser and 10.6 μm CO2 Laser
In this study, we analyzed the spatiotemporal distribution of annealing temperature using a dual-beam dynamic scanning annealing technique based on a CO2 laser (10.6 μm) and a 785 nm laser, and the effects of laser energy density, scanning speed, and preheating temperature on the resulting temperature. We systematically examined the influence of key process parameters, including laser energy density, scanning speed, and preheating temperature, on the annealing temperature. Our aim was to optimize annealing conditions to enhance the electrical properties of the materials, as indicated by reduced sheet resistance, controlled diffusion depth of doped ions, and higher activation rates. This approach ensured high activation rates of doped ions while limiting dopant re-diffusion to merely 3.6 nm in the depth direction, as confirmed by concentration profile analysis. Furthermore, based on temperature distribution, deformation of the wafer surface was analyzed. The results indicate that under the employed process parameters, no significant adverse effects on wafer flatness or structural integrity were observed.
Open AccessSimulations and Experiments on Activation of Doped Silicon Wafers Based on Dual Beam of 785 nm Semiconductor Laser and 10.6 μm CO2 Laser
In this study, we analyzed the spatiotemporal distribution of annealing temperature using a dual-beam dynamic scanning annealing technique based on a CO2 laser (10.6 μm) and a 785 nm laser, and the effects of laser energy density, scanning speed, and preheating temperature on the resulting temperature. We systematically examined the influence of key process parameters, including laser energy density, scanning speed, and preheating temperature, on the annealing temperature. Our aim was to optimize annealing conditions to enhance the electrical properties of the materials, as indicated by reduced sheet resistance, controlled diffusion depth of doped ions, and higher activation rates. This approach ensured high activation rates of doped ions while limiting dopant re-diffusion to merely 3.6 nm in the depth direction, as confirmed by concentration profile analysis. Furthermore, based on temperature distribution, deformation of the wafer surface was analyzed. The results indicate that under the employed process parameters, no significant adverse effects on wafer flatness or structural integrity were observed.
- Open Access
Laser Annealing of Si Wafers Based on a Pulsed CO2 Laser
Laser annealing plays a significant role in the fabrication of scaled-down semiconductor devices by activating dopant ions and rearranging silicon atoms in ion-implanted silicon wafers, thereby improving material properties. Precise temperature control is crucial in wafer annealing, particularly for repeated processes where repeatability affects uniformity. In this study, we employ a three-dimensional time-dependent thermal simulation model to numerically analyze the multiple static laser annealing processes based on a CO2 laser with a center wavelength of 9.3 μm and a pulse repetition rate of 10 kHz. The heat transfer equation is solved using a multiphysics coupling approach to accurately simulate the effects of different numbers of CO2 laser pulses on wafer temperature rise and repeatability. Additionally, a pyrometer is used to collect and convert the surface temperature of the wafer. Radiation intensity is converted to temperature via Planck’s law for real-time monitoring. Post-processing is performed to fit the measured temperature and the actual temperature into a linear relationship, aiding in obtaining the actual temperature under small beam spots. According to the simulation conditions, a wafer annealing device using a CO2 laser as the light source was independently built for verification, and a stable and uniform annealing effect was realized.
Open AccessLaser Annealing of Si Wafers Based on a Pulsed CO2 Laser
Laser annealing plays a significant role in the fabrication of scaled-down semiconductor devices by activating dopant ions and rearranging silicon atoms in ion-implanted silicon wafers, thereby improving material properties. Precise temperature control is crucial in wafer annealing, particularly for repeated processes where repeatability affects uniformity. In this study, we employ a three-dimensional time-dependent thermal simulation model to numerically analyze the multiple static laser annealing processes based on a CO2 laser with a center wavelength of 9.3 μm and a pulse repetition rate of 10 kHz. The heat transfer equation is solved using a multiphysics coupling approach to accurately simulate the effects of different numbers of CO2 laser pulses on wafer temperature rise and repeatability. Additionally, a pyrometer is used to collect and convert the surface temperature of the wafer. Radiation intensity is converted to temperature via Planck’s law for real-time monitoring. Post-processing is performed to fit the measured temperature and the actual temperature into a linear relationship, aiding in obtaining the actual temperature under small beam spots. According to the simulation conditions, a wafer annealing device using a CO2 laser as the light source was independently built for verification, and a stable and uniform annealing effect was realized.
- Open Access
Theoretical Comparative Study on the Efficiency of High-Power Long-Distance Laser Power Transmission for Flight Systems
Wireless power transmission has become a research hotspot in the field of energy transmission, in which laser power transmission is one of the best methods for long-distance wireless transmission. Since laser has the advantages of high directivity, high energy density and no electromagnetic interference, laser power transmission technology can be applied to the energy supply of unmanned aerial vehicles (UAVs), micro-vehicles, airships and other flight systems. Long-distance laser power transmission can enable high-altitude flight systems to operate continuously without the need to return to the base station for charging, im-proving their operational efficiency. Therefore, high-altitude flight systems have a demand for laser power transmission. However, the commonly used lasers in laser power transmission are semiconductor lasers and fiber lasers, which are only suitable for short-distance transmission of about 1 km. In this paper, taking high-flying UAVs as an example, the transmission efficiency of different lasers used for laser power transmission is analyzed theoretically, and the results show that the diode pumped alkali vapor laser (DPAL) has a high transmission efficiency in high-power long-distance laser power transmission. The transmission efficiency of rubidium lasers which is 1.5 to 4 times that of other lasers can reach 21.94%, which illustrates that DPAL is expected to become a new type of laser source in laser power transmission technology.
Open AccessTheoretical Comparative Study on the Efficiency of High-Power Long-Distance Laser Power Transmission for Flight Systems
Wireless power transmission has become a research hotspot in the field of energy transmission, in which laser power transmission is one of the best methods for long-distance wireless transmission. Since laser has the advantages of high directivity, high energy density and no electromagnetic interference, laser power transmission technology can be applied to the energy supply of unmanned aerial vehicles (UAVs), micro-vehicles, airships and other flight systems. Long-distance laser power transmission can enable high-altitude flight systems to operate continuously without the need to return to the base station for charging, im-proving their operational efficiency. Therefore, high-altitude flight systems have a demand for laser power transmission. However, the commonly used lasers in laser power transmission are semiconductor lasers and fiber lasers, which are only suitable for short-distance transmission of about 1 km. In this paper, taking high-flying UAVs as an example, the transmission efficiency of different lasers used for laser power transmission is analyzed theoretically, and the results show that the diode pumped alkali vapor laser (DPAL) has a high transmission efficiency in high-power long-distance laser power transmission. The transmission efficiency of rubidium lasers which is 1.5 to 4 times that of other lasers can reach 21.94%, which illustrates that DPAL is expected to become a new type of laser source in laser power transmission technology.
- 18 November 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (21)
Fast modulation of a long-wave infrared laser based on the two-photon absorption of CO2
In this work, we report a long-wave infrared (LWIR) modulator based on the two-photon absorption of CO2 gas. The effect of gas pressure and laser power on the modulation under different wavelengths is discussed. A maximum modulation depth of 21.5% with a rise time (full time) less than 20 ns for a 9.36 μm laser was achieved. The gaseous modulator, which adopts a 2.75 μm laser as the pumping source, is capable of converting the pulse characteristics of the pump light into the modulation of the long-wave infrared light. It demonstrates promising potential for applications in the rapid optical modulation of LWIR lasers.
- 18 November 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (21)
Fast modulation of a long-wave infrared laser based on the two-photon absorption of CO2
In this work, we report a long-wave infrared (LWIR) modulator based on the two-photon absorption of CO2 gas. The effect of gas pressure and laser power on the modulation under different wavelengths is discussed. A maximum modulation depth of 21.5% with a rise time (full time) less than 20 ns for a 9.36 μm laser was achieved. The gaseous modulator, which adopts a 2.75 μm laser as the pumping source, is capable of converting the pulse characteristics of the pump light into the modulation of the long-wave infrared light. It demonstrates promising potential for applications in the rapid optical modulation of LWIR lasers.
- Open Access
Double-Cycle Alternating-Flow Diode Pumped Potassium Vapor Laser
A novel double-cycle alternating-flow diode-pumped potassium vapor laser is proposed, theoretically modeled and simulated. The results show that the optical-to-optical efficiency of the laser increases with increasing gas flow rates, although at high flow rates the rate of increase in efficiency decreases. The optical-to-optical efficiency reaches 74.8% at a pump power density of 30 kW/cm2 and a gas flow rate of 50 m/s. The optical-to-optical efficiency of the laser is greater with a narrow linewidth pump and high buffer gas pressure. The optical-to-optical efficiency of a flow gas cell is higher than that of a static gas cell. There is an optimal gas cell length that provides the highest optical-to-optical efficiency. At higher pump power densities, higher flow rates are required to obtain higher optical-to-optical efficiencies.
Open AccessDouble-Cycle Alternating-Flow Diode Pumped Potassium Vapor Laser
A novel double-cycle alternating-flow diode-pumped potassium vapor laser is proposed, theoretically modeled and simulated. The results show that the optical-to-optical efficiency of the laser increases with increasing gas flow rates, although at high flow rates the rate of increase in efficiency decreases. The optical-to-optical efficiency reaches 74.8% at a pump power density of 30 kW/cm2 and a gas flow rate of 50 m/s. The optical-to-optical efficiency of the laser is greater with a narrow linewidth pump and high buffer gas pressure. The optical-to-optical efficiency of a flow gas cell is higher than that of a static gas cell. There is an optimal gas cell length that provides the highest optical-to-optical efficiency. At higher pump power densities, higher flow rates are required to obtain higher optical-to-optical efficiencies.
- Open Access
Gain Measurement of ZnGeP2 Optical Parametric Oscillator Pulses in a High-Pressure CO2 Amplifier
Laser pulse amplification by a high-pressure CO2 amplifier in the long-wave infrared (LWIR) spectral range is a feasible technology for strong-field physics research. Crystals such as ZnGeP2 (ZGP) have high nonlinear coefficients and transmittance in the LWIR region, with spectral widths of generated pulses closely matching the gain spectrum of high-pressure CO2 amplifiers. Therefore, ZGP optical parametric oscillation (OPO) may allow higher-efficiency energy extraction in amplifiers, improving the output characteristics of LWIR amplification systems. In this study, the gain measurement of ZGP OPO pulses amplified by a high-pressure CO2 amplifier was carried out for the first time. Single-detector acquisition was utilized to achieve a unified sensor responsivity, and a laser signal-triggered function generator was used to synchronize the seed pulse and amplifier. Six-pass amplification was performed successively, yielding an amplification factor of 4.5 for the peak power and a maximum coefficient of 0.42% cm−1 for the small-signal gain. The gain and loss effect during small-signal amplification were discussed. The potential capability of acquiring ultra-short pulses with ZGP OPO pulses was also explored with the FFT function of MATLAB software.
Open AccessGain Measurement of ZnGeP2 Optical Parametric Oscillator Pulses in a High-Pressure CO2 Amplifier
Laser pulse amplification by a high-pressure CO2 amplifier in the long-wave infrared (LWIR) spectral range is a feasible technology for strong-field physics research. Crystals such as ZnGeP2 (ZGP) have high nonlinear coefficients and transmittance in the LWIR region, with spectral widths of generated pulses closely matching the gain spectrum of high-pressure CO2 amplifiers. Therefore, ZGP optical parametric oscillation (OPO) may allow higher-efficiency energy extraction in amplifiers, improving the output characteristics of LWIR amplification systems. In this study, the gain measurement of ZGP OPO pulses amplified by a high-pressure CO2 amplifier was carried out for the first time. Single-detector acquisition was utilized to achieve a unified sensor responsivity, and a laser signal-triggered function generator was used to synchronize the seed pulse and amplifier. Six-pass amplification was performed successively, yielding an amplification factor of 4.5 for the peak power and a maximum coefficient of 0.42% cm−1 for the small-signal gain. The gain and loss effect during small-signal amplification were discussed. The potential capability of acquiring ultra-short pulses with ZGP OPO pulses was also explored with the FFT function of MATLAB software.
- 19 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 60 (2) , 1-7
Long-Wave Infrared ZnGeP2 Optical Parametric Oscillator With a Wide Tuning Range by Rotating a Diffraction Grating
We report a ZnGeP 2 optical parametric oscillator (OPO) with a wide tuning range in the long-wave infrared. The OPO was pumped by a Ho: YLF laser with high peak power, and a resonate cavity with a diffraction grating was used. A tunable long-wave laser with the wavelength of 8.45-11.37 μm was achieved by rotating the grating. Meanwhile, the linewidth was less than 61 nm at the wavelength within the tunable range from 8.45 μm to 9.15 μm. When the wavelength of the idler light was 8.84 μm, the maximum output energy was 52.80 μJ, and the peak power was 6.60 kW. The novel tuning method offers an effective way to realize a tunable long-wave source for stand-off gas concentration detection.
- 19 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Quantum Electronics
- Vol. 60 (2) , 1-7
Long-Wave Infrared ZnGeP2 Optical Parametric Oscillator With a Wide Tuning Range by Rotating a Diffraction Grating
We report a ZnGeP 2 optical parametric oscillator (OPO) with a wide tuning range in the long-wave infrared. The OPO was pumped by a Ho: YLF laser with high peak power, and a resonate cavity with a diffraction grating was used. A tunable long-wave laser with the wavelength of 8.45-11.37 μm was achieved by rotating the grating. Meanwhile, the linewidth was less than 61 nm at the wavelength within the tunable range from 8.45 μm to 9.15 μm. When the wavelength of the idler light was 8.84 μm, the maximum output energy was 52.80 μJ, and the peak power was 6.60 kW. The novel tuning method offers an effective way to realize a tunable long-wave source for stand-off gas concentration detection.
- Open Access
Calculation of BaGa4Se7 OPO/OPA Output Spectrum Characteristics
Optical parametric oscillation (OPO) or optical parametric amplification (OPA) systems offer significant potential for generating high-energy, narrow-pulse laser output, finding applications across various domains. To achieve efficient amplification in cascade with amplifiers, precise frequency domain matching between OPO/OPA systems and amplifiers is imperative. Therefore, preliminary simulation and computation of the spectral characteristics of OPO/OPA systems are of paramount importance in the early stages of experimentation. Currently, the calculation of OPO/OPA output spectrum characteristics is limited to estimating the influence of pump light characteristics on output spectrum linewidth, a consideration that remains incomplete. This paper presents a comprehensive computational approach that takes into account the impact of four crucial factors on the output spectrum characteristics: pump light linewidth, pump light divergence angle, the walk-off effect, and the absorption loss of the crystal. This method finely characterizes the features of the output spectrum. The results obtained through the proposed approach align well with experimental results, underscoring its effectiveness. This study aims to obtain the output spectrum characteristics of BaGa4Se7 OPO/OPA through calculations to provide theoretical guidance for subsequent cascade amplification experiments.
Open AccessCalculation of BaGa4Se7 OPO/OPA Output Spectrum Characteristics
Optical parametric oscillation (OPO) or optical parametric amplification (OPA) systems offer significant potential for generating high-energy, narrow-pulse laser output, finding applications across various domains. To achieve efficient amplification in cascade with amplifiers, precise frequency domain matching between OPO/OPA systems and amplifiers is imperative. Therefore, preliminary simulation and computation of the spectral characteristics of OPO/OPA systems are of paramount importance in the early stages of experimentation. Currently, the calculation of OPO/OPA output spectrum characteristics is limited to estimating the influence of pump light characteristics on output spectrum linewidth, a consideration that remains incomplete. This paper presents a comprehensive computational approach that takes into account the impact of four crucial factors on the output spectrum characteristics: pump light linewidth, pump light divergence angle, the walk-off effect, and the absorption loss of the crystal. This method finely characterizes the features of the output spectrum. The results obtained through the proposed approach align well with experimental results, underscoring its effectiveness. This study aims to obtain the output spectrum characteristics of BaGa4Se7 OPO/OPA through calculations to provide theoretical guidance for subsequent cascade amplification experiments.
- Open Access
- 18 January 2023
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-6
Ho:YAG laser at 2097 nm pumped by a narrow linewidth tunable 1.91 μm laser
This study presents a high efficiency Ho:YAG laser based on a narrow linewidth tunable 1.91 μm laser. A tunable Tm:YLF laser is the pump source and the wavelength continuous tunability ranges from 1906.04 to 1908.83 nm, corresponding to a linewidth of less than 0.41 nm. The tunable Tm:YLF laser is achieved by changing the operating temperature of the VBG. The output power of the Ho:YAG laser is between 21.04 and 23.53 W and the slope efficiency is between 64.08 and 68.26% at the pump power of 39.8 W. The output power and slope efficiency corresponding to the pump wavelength of 1907.36 nm are 23.53 W and 68.26%, respectively. This study illustrates that fine-tuning the pump wavelength is an effective way to improve the slope efficiency and output power of the Ho:YAG laser at room temperature.
- 18 January 2023
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-6
Open AccessHo:YAG laser at 2097 nm pumped by a narrow linewidth tunable 1.91 μm laser
This study presents a high efficiency Ho:YAG laser based on a narrow linewidth tunable 1.91 μm laser. A tunable Tm:YLF laser is the pump source and the wavelength continuous tunability ranges from 1906.04 to 1908.83 nm, corresponding to a linewidth of less than 0.41 nm. The tunable Tm:YLF laser is achieved by changing the operating temperature of the VBG. The output power of the Ho:YAG laser is between 21.04 and 23.53 W and the slope efficiency is between 64.08 and 68.26% at the pump power of 39.8 W. The output power and slope efficiency corresponding to the pump wavelength of 1907.36 nm are 23.53 W and 68.26%, respectively. This study illustrates that fine-tuning the pump wavelength is an effective way to improve the slope efficiency and output power of the Ho:YAG laser at room temperature.