Stephan Costabel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Stephan Costabel has a total of 90 co-authors. Here are the top co-authors by number of shared publications:
- Thomas Hiller
Leibniz Institute for Applied Geophysics Hanover Germany
10 shared publications - Mike Müller-Petke
LIAG Institute for Applied Geophysics, Hannover, Germany
9 shared publications Mike Müller-Petke
5 shared publications- Tobias Splith
LIAG Institute for Applied Geophysics, Hannover, Germany
4 shared publications Bastian Leykauf
Nomad Atomics GmbH, Rudower Chaussee 29 12489, Berlin, Germany
3 shared publications- Bárbara Blanco Arrué
LIAG Institute for Applied Geophysics, Hannover, Germany
3 shared publications
Latest Publications
- Open Access
- 4 November 2026
- Published by Society of Exploration Geophysicists in Geophysics
Characterization of peatlands using integrated ground-penetrating radar and nuclear magnetic resonance geophysical methods
Peatlands are crucial in the global carbon and nutrient cycles for water regulation and biodiversity, highlighting their importance, especially during times of global change. Grasping the spatial extent, depth, and internal structure of peatlands is essential for effective restoration and sustainable land use. Geophysical methods provide valuable information on these characteristics at various scales, with varying spatial resolutions and accuracies. This study integrates multiple ground-penetrating radar (GPR) techniques and surface nuclear magnetic resonance (SNMR) to characterize a drained peatland in the Gnarrenburg area of Germany. Constant-offset GPR mapping was used to image peat geometry and internal stratigraphy, while common-midpoint and guided-wave soundings provided velocity–depth models for estimating volumetric water content. SNMR sounding data were inverted to obtain relaxation-time distributions and water-content profiles, and GPR-derived reflectors were incorporated as structural constraints to improve inversion sharpness of internal layering of the peat. Soil cores and ring samples served as ground truth. Our results demonstrate that guided-wave GPR yields precise interval-velocity and water-content profiles, resolving small-scale variations and transitions at the peat–mineral interface. Constrained SNMR inversions successfully identify distinct relaxation-time signatures associated with varying peat decomposition states, particularly distinguishing less and highly decomposed layers. Thus, the combination of GPR and SNMR provides a comprehensive, minimally invasive framework for assessing peatland stratigraphy, water content distribution, and peat degradation. Given their relevance in global change, these encouraging outcomes present an opportunity to observe changes over time, making them especially suitable for costeffective monitoring purposes due to their minimally invasive characteristics. Ultimately, these methods serve as valuable tools for planning and guiding peatland restoration activities.
- 4 November 2026
- Published by Society of Exploration Geophysicists in Geophysics
Open AccessCharacterization of peatlands using integrated ground-penetrating radar and nuclear magnetic resonance geophysical methods
Peatlands are crucial in the global carbon and nutrient cycles for water regulation and biodiversity, highlighting their importance, especially during times of global change. Grasping the spatial extent, depth, and internal structure of peatlands is essential for effective restoration and sustainable land use. Geophysical methods provide valuable information on these characteristics at various scales, with varying spatial resolutions and accuracies. This study integrates multiple ground-penetrating radar (GPR) techniques and surface nuclear magnetic resonance (SNMR) to characterize a drained peatland in the Gnarrenburg area of Germany. Constant-offset GPR mapping was used to image peat geometry and internal stratigraphy, while common-midpoint and guided-wave soundings provided velocity–depth models for estimating volumetric water content. SNMR sounding data were inverted to obtain relaxation-time distributions and water-content profiles, and GPR-derived reflectors were incorporated as structural constraints to improve inversion sharpness of internal layering of the peat. Soil cores and ring samples served as ground truth. Our results demonstrate that guided-wave GPR yields precise interval-velocity and water-content profiles, resolving small-scale variations and transitions at the peat–mineral interface. Constrained SNMR inversions successfully identify distinct relaxation-time signatures associated with varying peat decomposition states, particularly distinguishing less and highly decomposed layers. Thus, the combination of GPR and SNMR provides a comprehensive, minimally invasive framework for assessing peatland stratigraphy, water content distribution, and peat degradation. Given their relevance in global change, these encouraging outcomes present an opportunity to observe changes over time, making them especially suitable for costeffective monitoring purposes due to their minimally invasive characteristics. Ultimately, these methods serve as valuable tools for planning and guiding peatland restoration activities.
- Open Access
- 13 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-39
Comment on egusphere-2026-5091
Gravitational force is proportional to the mass of an attracting body; therefore, changes in subsurface mass can be detected using gravimetry. In the near subsurface, mass variations are primarily driven by changes in water storage, meaning that gravity measurements provide direct information on variations in water mass. Traditionally, groundwater and soil water dynamics are monitored using point-scale instruments that require direct installation into the subsurface. In contrast, gravimetry is a non-invasive method that integrates signals over a larger spatial extent. Recent advancements in gravimeter technology have significantly improved measurement accuracy and long-term stability under field conditions, thereby expanding their potential for hydrological applications. This review summarizes recent developments in gravimetric instrumentation and provides essential background on gravimeters used for ground-based measurements and their application in hydrology, aiming to facil-itate their broader use. In addition, it presents an overview of studies in hydrology and hydrogeology that have successfully applied gravimetry to quantify subsurface water storage changes, estimate hydrological parameters, and constrain numerical models. A perspective on future advancement in gravimetry and resulting potential applications is given.
- 13 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-39
Open AccessComment on egusphere-2026-5091
Gravitational force is proportional to the mass of an attracting body; therefore, changes in subsurface mass can be detected using gravimetry. In the near subsurface, mass variations are primarily driven by changes in water storage, meaning that gravity measurements provide direct information on variations in water mass. Traditionally, groundwater and soil water dynamics are monitored using point-scale instruments that require direct installation into the subsurface. In contrast, gravimetry is a non-invasive method that integrates signals over a larger spatial extent. Recent advancements in gravimeter technology have significantly improved measurement accuracy and long-term stability under field conditions, thereby expanding their potential for hydrological applications. This review summarizes recent developments in gravimetric instrumentation and provides essential background on gravimeters used for ground-based measurements and their application in hydrology, aiming to facil-itate their broader use. In addition, it presents an overview of studies in hydrology and hydrogeology that have successfully applied gravimetry to quantify subsurface water storage changes, estimate hydrological parameters, and constrain numerical models. A perspective on future advancement in gravimetry and resulting potential applications is given.
- Open Access
- 5 October 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-39
Estimating subsurface water mass changes with ground-based gravimetry
Gravitational force is proportional to the mass of an attracting body; therefore, changes in subsurface mass can be detected using gravimetry. In the near subsurface, mass variations are primarily driven by changes in water storage, meaning that gravity measurements provide direct information on variations in water mass. Traditionally, groundwater and soil water dynamics are monitored using point-scale instruments that require direct installation into the subsurface. In contrast, gravimetry is a non-invasive method that integrates signals over a larger spatial extent. Recent advancements in gravimeter technology have significantly improved measurement accuracy and long-term stability under field conditions, thereby expanding their potential for hydrological applications. This review summarizes recent developments in gravimetric instrumentation and provides essential background on gravimeters used for ground-based measurements and their application in hydrology, aiming to facil-itate their broader use. In addition, it presents an overview of studies in hydrology and hydrogeology that have successfully applied gravimetry to quantify subsurface water storage changes, estimate hydrological parameters, and constrain numerical models. A perspective on future advancement in gravimetry and resulting potential applications is given.
- 5 October 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-39
Open AccessEstimating subsurface water mass changes with ground-based gravimetry
Gravitational force is proportional to the mass of an attracting body; therefore, changes in subsurface mass can be detected using gravimetry. In the near subsurface, mass variations are primarily driven by changes in water storage, meaning that gravity measurements provide direct information on variations in water mass. Traditionally, groundwater and soil water dynamics are monitored using point-scale instruments that require direct installation into the subsurface. In contrast, gravimetry is a non-invasive method that integrates signals over a larger spatial extent. Recent advancements in gravimeter technology have significantly improved measurement accuracy and long-term stability under field conditions, thereby expanding their potential for hydrological applications. This review summarizes recent developments in gravimetric instrumentation and provides essential background on gravimeters used for ground-based measurements and their application in hydrology, aiming to facil-itate their broader use. In addition, it presents an overview of studies in hydrology and hydrogeology that have successfully applied gravimetry to quantify subsurface water storage changes, estimate hydrological parameters, and constrain numerical models. A perspective on future advancement in gravimetry and resulting potential applications is given.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Constraining hydrological models by combining ground-based gravimetry and magnetic resonance sounding
Hydrological models, which simulate natural processes, are prone to uncertainty due to shortcomings such as data being insufficient or incomplete, limited to point scale or the equifinality of the model itself. Using varying data sources to constrain the model can help to overcome these issues and to create more reliable models. As variations in subsurface water storage are equivalent to mass redistributions that are proven to be measurable using modern gravimetry equipment, gravity measurements can advance hydrological modelling. Magnetic resonance soundings (MRS) probe the 1H spin magnetization of subsurface water molecules and provide vertical water content distributions covering both the saturated and unsaturated zone. The use of gravity and MRS data to improve hydrological modelling is explored in this project. An integrated hydrological model is built, which simulates surface and subsurface flows, and its output is converted into the corresponding changes in gravity on the one hand, and in the MRS response on the other. These numerical results are then compared with real measurements of a high-precision quantum absolute gravimeter as well as of an MRS device with reduced instrumental dead time optimized to provide water content information from the unsaturated zone with increased accuracy. Whereas MRS measurements are point information similar to borehole data, yet non-invasive and thus cheaper than hydrogeological drillings, gravity measurements are beneficial, as they provide integrated information over extended areas. However, they also capture other processes causing mass redistributions, which is why they can produce significant noise. Thus, it is expected that processes in the unsaturated zone, although contributing to the signal, might be difficult to detect by the quantum gravimeter despite of its improved resolution properties. This is why we expect the combination with the additional MRS data might be superior to the usage of hydrogravimetry alone.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessConstraining hydrological models by combining ground-based gravimetry and magnetic resonance sounding
Hydrological models, which simulate natural processes, are prone to uncertainty due to shortcomings such as data being insufficient or incomplete, limited to point scale or the equifinality of the model itself. Using varying data sources to constrain the model can help to overcome these issues and to create more reliable models. As variations in subsurface water storage are equivalent to mass redistributions that are proven to be measurable using modern gravimetry equipment, gravity measurements can advance hydrological modelling. Magnetic resonance soundings (MRS) probe the 1H spin magnetization of subsurface water molecules and provide vertical water content distributions covering both the saturated and unsaturated zone. The use of gravity and MRS data to improve hydrological modelling is explored in this project. An integrated hydrological model is built, which simulates surface and subsurface flows, and its output is converted into the corresponding changes in gravity on the one hand, and in the MRS response on the other. These numerical results are then compared with real measurements of a high-precision quantum absolute gravimeter as well as of an MRS device with reduced instrumental dead time optimized to provide water content information from the unsaturated zone with increased accuracy. Whereas MRS measurements are point information similar to borehole data, yet non-invasive and thus cheaper than hydrogeological drillings, gravity measurements are beneficial, as they provide integrated information over extended areas. However, they also capture other processes causing mass redistributions, which is why they can produce significant noise. Thus, it is expected that processes in the unsaturated zone, although contributing to the signal, might be difficult to detect by the quantum gravimeter despite of its improved resolution properties. This is why we expect the combination with the additional MRS data might be superior to the usage of hydrogravimetry alone.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Using surface-NMR measurements to study the effects of compaction measures on the properties of lignite mining dumps
In the last 15 to 20 years, a sudden spike of liquefaction events after groundwater rebound on inner dumps in the Lusatian mining district resulted in around 30,000 hectares of land being closed to public access. One of the common modern compaction methods used is the gentle-blast-compaction (GBC), in which minimal explosive charges are placed in defined depth horizons (below the groundwater table) and detonated one after the other from the bottom upwards. The primary objective is to improve the ground stability by locally collapsing the pore structure of the material. This increases the bulk density of the dump material and reduces the air and waterfilled proportion of the pore space. Usually, direct geotechnical methods like drillings or cone penetration tests (CPT) are used to verify successful compaction. Within the “VerLaUf” project, we investigate the suitability of various airborne and ground-based geophysical methods for the non-invasive evaluation of these compaction measures. In the present study, we focus in particular on the applicability of two electromagnetic methods, transient electromagnetics (TEM) and surface nuclear magnetic resonance (SNMR). The TEM measurements are used to obtain a resistivity model of the subsurface which is needed for the inversion and interpretation of the SNMR data. Due to the direct correlation between SNMR signal amplitude and water content (porosity) as well as SNMR relaxation time and pore size, the SNMR method promises not only qualitative but also quantitative results about the change in the (water-filled) pore space after GBC.Field campaigns were carried out over the course of three years, where the GBC took place after the first measurement campaign at depths ranging from 7 m to 32 m. The subsequent measurement campaigns were carried out after the GBC, with waiting times of approx. five and 15 months, respectively. The TEM and SNMR measurements consisted of 1D soundings along a 2D profile which was about 450 m long. One reference point, without GBC and about 400 m away from the profile, was measured for comparison and to identify seasonal variations in the data. All measurements were carried out with identical field setups and measurement parameters (loop size, number of averaging measurement repetitions, etc.). The recorded data were processed in an identical manner and a QT-inversion was used to derive a depth resolved partial water content model, i.e., the water content as function of depth and relaxation time. Due to the noisiness of the SNMR data, we used a permeability index, a combination of SNMR signal amplitude and relaxation time, to evaluate the results. By doing so, we reduce the inherent ambiguity (especially in noisy data) between the two parameters. Comparing the results from the first with the last field campaign shows, that a reduction of the permeability index within the GBC targeted layers of about 33 percent is detected, which is indicative for a respective compaction.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessUsing surface-NMR measurements to study the effects of compaction measures on the properties of lignite mining dumps
In the last 15 to 20 years, a sudden spike of liquefaction events after groundwater rebound on inner dumps in the Lusatian mining district resulted in around 30,000 hectares of land being closed to public access. One of the common modern compaction methods used is the gentle-blast-compaction (GBC), in which minimal explosive charges are placed in defined depth horizons (below the groundwater table) and detonated one after the other from the bottom upwards. The primary objective is to improve the ground stability by locally collapsing the pore structure of the material. This increases the bulk density of the dump material and reduces the air and waterfilled proportion of the pore space. Usually, direct geotechnical methods like drillings or cone penetration tests (CPT) are used to verify successful compaction. Within the “VerLaUf” project, we investigate the suitability of various airborne and ground-based geophysical methods for the non-invasive evaluation of these compaction measures. In the present study, we focus in particular on the applicability of two electromagnetic methods, transient electromagnetics (TEM) and surface nuclear magnetic resonance (SNMR). The TEM measurements are used to obtain a resistivity model of the subsurface which is needed for the inversion and interpretation of the SNMR data. Due to the direct correlation between SNMR signal amplitude and water content (porosity) as well as SNMR relaxation time and pore size, the SNMR method promises not only qualitative but also quantitative results about the change in the (water-filled) pore space after GBC.Field campaigns were carried out over the course of three years, where the GBC took place after the first measurement campaign at depths ranging from 7 m to 32 m. The subsequent measurement campaigns were carried out after the GBC, with waiting times of approx. five and 15 months, respectively. The TEM and SNMR measurements consisted of 1D soundings along a 2D profile which was about 450 m long. One reference point, without GBC and about 400 m away from the profile, was measured for comparison and to identify seasonal variations in the data. All measurements were carried out with identical field setups and measurement parameters (loop size, number of averaging measurement repetitions, etc.). The recorded data were processed in an identical manner and a QT-inversion was used to derive a depth resolved partial water content model, i.e., the water content as function of depth and relaxation time. Due to the noisiness of the SNMR data, we used a permeability index, a combination of SNMR signal amplitude and relaxation time, to evaluate the results. By doing so, we reduce the inherent ambiguity (especially in noisy data) between the two parameters. Comparing the results from the first with the last field campaign shows, that a reduction of the permeability index within the GBC targeted layers of about 33 percent is detected, which is indicative for a respective compaction.
- Open Access
NUCLEUS – A Matlab-based graphical user interface for forward and inverse modelling of NMR relaxometry data
- Open Access
- 11 August 2025
- Published by Elsevier in Journal of Hydrology
- Vol. 662
Hydraulic conductivity estimation by NMR data in unconsolidated geological materials: insights from SDR model calibrations
- 11 August 2025
- Published by Elsevier in Journal of Hydrology
- Vol. 662
Open AccessHydraulic conductivity estimation by NMR data in unconsolidated geological materials: insights from SDR model calibrations
- 2 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Strategies for GPR Peatland Characterisation
Peatlands play an important role in the global carbon cycle, as they are carbon sinks or sources depending on their use and water drainage status. Due to their high water retention potential, peatlands are also important for water management, i.e. to prevent floods in seasons with high rainfalls and as water source in dry seasons. The thickness, inner layering and state of degradation of peat deposits is important knowledge that is needed when describing the peatland status and to plan renaturation or sustainable land use. GPR mapping and local sounding techniques are used to get the geometry (total thickness and internal peat layering) and assess peat properties. Constant offset surveying is a fast method to map the lateral extent and thickness of the peat body and gives insight into peat internal layering. Non-invasive common midpoint soundings provide point information on EM wave velocity and can be used to identify the peat bottom reflection by detecting the Brewster angle for parallel E-field orientation. In addition, minimal invasive guided-wave soundings provide wave velocities and related water contents with high vertical resolution of approx. 1 dm and can also probe the sediments below the peat base. Combining these methods with nuclear magnetic resonance will provide further important information on the degree of decomposition of the different peat layers.
- 2 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Strategies for GPR Peatland Characterisation
Peatlands play an important role in the global carbon cycle, as they are carbon sinks or sources depending on their use and water drainage status. Due to their high water retention potential, peatlands are also important for water management, i.e. to prevent floods in seasons with high rainfalls and as water source in dry seasons. The thickness, inner layering and state of degradation of peat deposits is important knowledge that is needed when describing the peatland status and to plan renaturation or sustainable land use. GPR mapping and local sounding techniques are used to get the geometry (total thickness and internal peat layering) and assess peat properties. Constant offset surveying is a fast method to map the lateral extent and thickness of the peat body and gives insight into peat internal layering. Non-invasive common midpoint soundings provide point information on EM wave velocity and can be used to identify the peat bottom reflection by detecting the Brewster angle for parallel E-field orientation. In addition, minimal invasive guided-wave soundings provide wave velocities and related water contents with high vertical resolution of approx. 1 dm and can also probe the sediments below the peat base. Combining these methods with nuclear magnetic resonance will provide further important information on the degree of decomposition of the different peat layers.
- Open Access
- 30 April 2025
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 242 (1)
Longitudinal to transverse relaxation time ratio (T1/T2) in unconsolidated geological materials: a perspective from 2-D borehole and laboratory NMR measurements
SUMMARY: This study investigates the longitudinal (T1) to transverse (T2) relaxation time ratios in unconsolidated geological materials to determine how they vary across different geological units. Assessing the T1/T2 ratio can inform about the validity of the presumed relationship between T1 and T2 relaxation times in steady-state surface nuclear magnetic resonance (NMR) modelling (i.e. T1/T2 ratio is assumed to be constant and equal to one). The T1/T2 ratio investigation is conducted by 2-D T1–T2 correlation data using laboratory and borehole NMR measurements at a Larmor frequency of 2 MHz and 430 kHz, respectively. Laboratory NMR measurements were performed on 73 sediment samples from nine sites in Denmark and Germany, and borehole NMR measurements were conducted at 59 selected depth intervals in unconsolidated geological units across eight sites in the same countries. Volumetric magnetic susceptibility of the laboratory samples was measured to evaluate the effects of magnetic susceptibility on the T1/T2 ratio. Our results indicate that the T1/T2 ratios in mineral soils and sediments are pretty similar for borehole NMR and lab NMR data sets, regardless of the geological unit. In these geological materials, the mean value of the T1/T2 ratios is 1.64 in lab-NMR and 1.82 in borehole NMR data sets. In contrast, in our in-situ borehole NMR measurements in organic peat soils, the mean value of the T1/T2 ratios was higher (i.e. 2.77), exhibiting a broader distribution ranging from 1 to 4.8. Moreover, we observed that magnetic susceptibility did not have a significant effect on the T1/T2 ratio in the investigated samples. More importantly, the findings in this study can be adopted in the modelling of steady-state surface NMR modelling routines where a constant ratio of 1 for T1/T2 is assumed when solving the Bloch equations. It is expected that updating the T1/T2 ratio can improve the accuracy of water content and relaxation time estimations derived from steady-state surface NMR measurements.
- 30 April 2025
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 242 (1)
Open AccessLongitudinal to transverse relaxation time ratio (T1/T2) in unconsolidated geological materials: a perspective from 2-D borehole and laboratory NMR measurements
SUMMARY: This study investigates the longitudinal (T1) to transverse (T2) relaxation time ratios in unconsolidated geological materials to determine how they vary across different geological units. Assessing the T1/T2 ratio can inform about the validity of the presumed relationship between T1 and T2 relaxation times in steady-state surface nuclear magnetic resonance (NMR) modelling (i.e. T1/T2 ratio is assumed to be constant and equal to one). The T1/T2 ratio investigation is conducted by 2-D T1–T2 correlation data using laboratory and borehole NMR measurements at a Larmor frequency of 2 MHz and 430 kHz, respectively. Laboratory NMR measurements were performed on 73 sediment samples from nine sites in Denmark and Germany, and borehole NMR measurements were conducted at 59 selected depth intervals in unconsolidated geological units across eight sites in the same countries. Volumetric magnetic susceptibility of the laboratory samples was measured to evaluate the effects of magnetic susceptibility on the T1/T2 ratio. Our results indicate that the T1/T2 ratios in mineral soils and sediments are pretty similar for borehole NMR and lab NMR data sets, regardless of the geological unit. In these geological materials, the mean value of the T1/T2 ratios is 1.64 in lab-NMR and 1.82 in borehole NMR data sets. In contrast, in our in-situ borehole NMR measurements in organic peat soils, the mean value of the T1/T2 ratios was higher (i.e. 2.77), exhibiting a broader distribution ranging from 1 to 4.8. Moreover, we observed that magnetic susceptibility did not have a significant effect on the T1/T2 ratio in the investigated samples. More importantly, the findings in this study can be adopted in the modelling of steady-state surface NMR modelling routines where a constant ratio of 1 for T1/T2 is assumed when solving the Bloch equations. It is expected that updating the T1/T2 ratio can improve the accuracy of water content and relaxation time estimations derived from steady-state surface NMR measurements.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Laboratory NMR relaxometry provides ground truth for prepolarized surface NMR measurements
A new sensor for non-invasive soil moisture detection, based on the principle of prepolarized surface-nuclear magnetic resonance (PP-SNMR) (Splith, T., et al., 2024) was tested on a profile covering the transition from mineral to peat soil in the Gnarrenburger Moor in northwest Germany. This prototype has a size of 2.0m by 2.0m and consists of distinct coil systems for prepolarization, stimulation and detection of the NMR response of the protons of the soil water molecules in the Earth’s magnetic field. To provide ground truth for the in-situ measurements, we carried out laboratory NMR experiments using undisturbed soil samples from the PP-SNMR measurement positions at depths between 0.0m to 0.66m. However, the question arises how comparable the relaxation properties of PP-SNMR and laboratory NMR can be, because the latter works at artificial magnetic fields, i.e. at different Larmor frequencies (fL).To identify a possible frequency-dependency of the resulting relaxation time distributions (RTD), we used two NMR devices in the laboratory: a single-sided NMR system (PM25, Magritek, fL =13.2 MHz) and a core scanner (Helios, Vista Clara, fL =0.5 MHz). The RTDs were calculated using the Matlab-based NUCLEUS-Software (Hiller, T., 2024), which provides confidence intervals for initial amplitude and logarithmic mean relaxation time to allow improved statistical analyses.Within their individual confidence intervals, the T2 RTDs measured in the laboratory are in agreement to each other and also to the RTDs of T2* measured in the field for relaxation times >6 ms, which corresponds to the effective dead time of the PP-SNMR prototype. Correspondingly, the PP-SNMR moisture content from soil regions with significant amount of micropores with T2(*)
- 18 March 2025
- Published by Copernicus GmbH
Open AccessLaboratory NMR relaxometry provides ground truth for prepolarized surface NMR measurements
A new sensor for non-invasive soil moisture detection, based on the principle of prepolarized surface-nuclear magnetic resonance (PP-SNMR) (Splith, T., et al., 2024) was tested on a profile covering the transition from mineral to peat soil in the Gnarrenburger Moor in northwest Germany. This prototype has a size of 2.0m by 2.0m and consists of distinct coil systems for prepolarization, stimulation and detection of the NMR response of the protons of the soil water molecules in the Earth’s magnetic field. To provide ground truth for the in-situ measurements, we carried out laboratory NMR experiments using undisturbed soil samples from the PP-SNMR measurement positions at depths between 0.0m to 0.66m. However, the question arises how comparable the relaxation properties of PP-SNMR and laboratory NMR can be, because the latter works at artificial magnetic fields, i.e. at different Larmor frequencies (fL).To identify a possible frequency-dependency of the resulting relaxation time distributions (RTD), we used two NMR devices in the laboratory: a single-sided NMR system (PM25, Magritek, fL =13.2 MHz) and a core scanner (Helios, Vista Clara, fL =0.5 MHz). The RTDs were calculated using the Matlab-based NUCLEUS-Software (Hiller, T., 2024), which provides confidence intervals for initial amplitude and logarithmic mean relaxation time to allow improved statistical analyses.Within their individual confidence intervals, the T2 RTDs measured in the laboratory are in agreement to each other and also to the RTDs of T2* measured in the field for relaxation times >6 ms, which corresponds to the effective dead time of the PP-SNMR prototype. Correspondingly, the PP-SNMR moisture content from soil regions with significant amount of micropores with T2(*)