Dongxia Hu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Dongxia Hu has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
Zhou Wei
China Academy of Engineering Physics
2 shared publicationsChen Fengdong
Harbin Institute of Technology
1 shared publication- Chenzhuo Wang
Laser Fusion Research Center, China Academy of Engineer Physics, Mianyang 621900, China
1 shared publication Dai Wan-Jun
China Acad Engn Phys, Res Ctr Laser Fus, Mianyang 621900, Peoples R China
1 shared publicationDeng Xue-Wei
China Acad Engn Phys, Res Ctr Laser Fus, Mianyang 621900, Peoples R China
1 shared publication- Dongya Chu
School of Mechanical Engineer, Tsinghua University, Beijing 100084, China
1 shared publication
Latest Publications
- Open Access
A Novel Method for Precision Measurement and Result Optimization of Detuning Angle for KDP Crystals
In this paper, we investigate the theory of energy distribution when divergent light undergoes harmonic conversion in KDP crystals, and based on this theory, we design and construct a precision measuring instrument for the detuning angle of (KDP) Crystals (MIDC). The device can obtain the detuning angle of the crystal by a single measurement with an average measurement error of 72.78 urad. At the same time, it also has the function of scanning the full aperture of the crystals. Using the MIDC, it is possible to quickly measure the KDP crystal at a single point and quickly scan the crystal detuning angle at full aperture. In addition, we conduct a theoretical study on the variation of detuning angle caused by gravity-influencing factors under online conditions, propose an optimization formula for the offline measurement results of detuning angle, and calculate the optimized values of detuning angle for two kinds of crystals under 45° online conditions. We finally study the error source of the MIDC device, analyze the trend of the influence of positioning errors of the crystal and optical elements on the detuning angle measurement results, and provide theoretical support for the error monitoring and correction of MIDC.
Open AccessA Novel Method for Precision Measurement and Result Optimization of Detuning Angle for KDP Crystals
In this paper, we investigate the theory of energy distribution when divergent light undergoes harmonic conversion in KDP crystals, and based on this theory, we design and construct a precision measuring instrument for the detuning angle of (KDP) Crystals (MIDC). The device can obtain the detuning angle of the crystal by a single measurement with an average measurement error of 72.78 urad. At the same time, it also has the function of scanning the full aperture of the crystals. Using the MIDC, it is possible to quickly measure the KDP crystal at a single point and quickly scan the crystal detuning angle at full aperture. In addition, we conduct a theoretical study on the variation of detuning angle caused by gravity-influencing factors under online conditions, propose an optimization formula for the offline measurement results of detuning angle, and calculate the optimized values of detuning angle for two kinds of crystals under 45° online conditions. We finally study the error source of the MIDC device, analyze the trend of the influence of positioning errors of the crystal and optical elements on the detuning angle measurement results, and provide theoretical support for the error monitoring and correction of MIDC.
- Open Access
UNet-Based Framework for Predicting the Waveform of Laser Pulses of the Front-End System in a Current High-Power Laser Facility
Performing data mining on large waveform datasets of a high-power laser facility is an important way to achieve precise regulation of a device. However, there are currently issues with missing values, noise, and inconsistency in this database of measuring pulse waveform in a current high-power laser facility. In this paper, a UNet of a series residual module is presented to predict the pulse waveform of a front-end chained system in a current high-power laser facility. The designed network is trained on grouped sequences formed by experimentally measuring pulse waveforms of a high-power laser facility. The strategies of relay output and relay loss are employed in training in order to enable the network to predict two kinds of pulse waveforms simultaneously. The trained network achieved an RMSE of 3.38% on the testing set of measuring pulse waveform at a frequency of 1 Hz, and an RMSE of 0.84% on the testing set of setting the voltage of the Arbitrary Waveform Generator (AWG). These results indicate that this method can accurately fill in paired missing values in the waveform database of a high-power laser facility. The main advantage of this method is that it can quickly couple operational parameters for prediction, and this method can be applied to predicting laser performance, cleaning one-dimensional sequences, and maintaining a waveform database.
Open AccessUNet-Based Framework for Predicting the Waveform of Laser Pulses of the Front-End System in a Current High-Power Laser Facility
Performing data mining on large waveform datasets of a high-power laser facility is an important way to achieve precise regulation of a device. However, there are currently issues with missing values, noise, and inconsistency in this database of measuring pulse waveform in a current high-power laser facility. In this paper, a UNet of a series residual module is presented to predict the pulse waveform of a front-end chained system in a current high-power laser facility. The designed network is trained on grouped sequences formed by experimentally measuring pulse waveforms of a high-power laser facility. The strategies of relay output and relay loss are employed in training in order to enable the network to predict two kinds of pulse waveforms simultaneously. The trained network achieved an RMSE of 3.38% on the testing set of measuring pulse waveform at a frequency of 1 Hz, and an RMSE of 0.84% on the testing set of setting the voltage of the Arbitrary Waveform Generator (AWG). These results indicate that this method can accurately fill in paired missing values in the waveform database of a high-power laser facility. The main advantage of this method is that it can quickly couple operational parameters for prediction, and this method can be applied to predicting laser performance, cleaning one-dimensional sequences, and maintaining a waveform database.
- Open Access
Optical Isolation of the Amplifier Cavity in XG-III PW Beamline
Optical isolation with high-quality, large-aperture polarizers is commonly used in high-power laser facilities to suppress retro-reflected pulses. However, it is hard to manufacture these polarizers. We propose an approach of optical isolation with two plasma-electrode Pockels cells instead of large-aperture polarizers. In this approach, Nd:glass slabs placed at the Brewster′s angle are used as polarizers. The analysis results and the application performances in the Xingguang (Star Light) XG-III PW beamline indicate that this approach can supply good protection to optical components in laser facilities.
Open AccessOptical Isolation of the Amplifier Cavity in XG-III PW Beamline
Optical isolation with high-quality, large-aperture polarizers is commonly used in high-power laser facilities to suppress retro-reflected pulses. However, it is hard to manufacture these polarizers. We propose an approach of optical isolation with two plasma-electrode Pockels cells instead of large-aperture polarizers. In this approach, Nd:glass slabs placed at the Brewster′s angle are used as polarizers. The analysis results and the application performances in the Xingguang (Star Light) XG-III PW beamline indicate that this approach can supply good protection to optical components in laser facilities.
- 24 January 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (3) , 4046-4057
Laser energy prediction with ensemble neural networks for high-power laser facility
The energy accuracy of laser beams is an essential property of the inertial confinement fusion (ICF) facility. However, the energy gain is difficult to control precisely by traditional Frantz-Nodvik equations due to the dramatically-increasing complexity of the huge optical system. A novel method based on ensemble deep neural networks is proposed to predict the laser output energy of the main amplifier. The artificial neural network counts in 39 more related factors that the physical model neglected, and an ensemble method is exploited to obtain robust and stable predictions. The sensitivity of each factor is analyzed by saliency after training to find out the factors which should be controlled strictly. The identification of factor sensitivities reduces relatively unimportant factors, simplifying the neural network model with little effect on the prediction results. The predictive accuracy is benchmarked against the measured energy and the proposed method obtains a relative deviation of 1.59% in prediction, which has a 2.5 times improvement in accuracy over the conventional method. (C) 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement
- 24 January 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (3) , 4046-4057
Laser energy prediction with ensemble neural networks for high-power laser facility
The energy accuracy of laser beams is an essential property of the inertial confinement fusion (ICF) facility. However, the energy gain is difficult to control precisely by traditional Frantz-Nodvik equations due to the dramatically-increasing complexity of the huge optical system. A novel method based on ensemble deep neural networks is proposed to predict the laser output energy of the main amplifier. The artificial neural network counts in 39 more related factors that the physical model neglected, and an ensemble method is exploited to obtain robust and stable predictions. The sensitivity of each factor is analyzed by saliency after training to find out the factors which should be controlled strictly. The identification of factor sensitivities reduces relatively unimportant factors, simplifying the neural network model with little effect on the prediction results. The predictive accuracy is benchmarked against the measured energy and the proposed method obtains a relative deviation of 1.59% in prediction, which has a 2.5 times improvement in accuracy over the conventional method. (C) 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement
- 1 January 2015
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 64 (19) , 195203
Capsule illumination uniformity illuminated by direct laser-driven irradiation from several tens of directions
针对甚多束激光辐照下的直接驱动靶面光强均匀分布开展了系统研究. 利用球谐模分析选定了可实现均匀辐照的靶面弹着点极角分布, 并通过数值模拟确定了以等效48束激光直接驱动辐照下靶面三环弹着点极角位置分别为22.4, 47.7和73.6. 基于特定装置构型分析了实现极向直接驱动时对各路激光指向的修正, 并对光束截面焦斑进行了优化, 实现了极向直接驱动下的靶面均匀辐照.
- 1 January 2015
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 64 (19) , 195203
Capsule illumination uniformity illuminated by direct laser-driven irradiation from several tens of directions
针对甚多束激光辐照下的直接驱动靶面光强均匀分布开展了系统研究. 利用球谐模分析选定了可实现均匀辐照的靶面弹着点极角分布, 并通过数值模拟确定了以等效48束激光直接驱动辐照下靶面三环弹着点极角位置分别为22.4, 47.7和73.6. 基于特定装置构型分析了实现极向直接驱动时对各路激光指向的修正, 并对光束截面焦斑进行了优化, 实现了极向直接驱动下的靶面均匀辐照.
- 9 January 2014
- Published by Optica Publishing Group in Applied Optics
- Vol. 53 (2) , 237-243
Research on controlling thermal deformable mirror’s influence functions via manipulating thermal fields
For thermal deformable mirrors (DMs), the thermal field control is important because it will decide aberration correction effects. In order to better manipulate the thermal fields, a simple water convection system is proposed. The water convection system, which can be applied in thermal field bimetal DMs, shows effective thermal fields and influence-function controlling abilities. This is verified by the simulations and the contrast experiments of two prototypes: one of which utilizes air convection, the other uses water convection. Controlling the thermal fields will greatly promote the influence-function adjustability and aberration correction ability of thermal DMs.
- 9 January 2014
- Published by Optica Publishing Group in Applied Optics
- Vol. 53 (2) , 237-243
Research on controlling thermal deformable mirror’s influence functions via manipulating thermal fields
For thermal deformable mirrors (DMs), the thermal field control is important because it will decide aberration correction effects. In order to better manipulate the thermal fields, a simple water convection system is proposed. The water convection system, which can be applied in thermal field bimetal DMs, shows effective thermal fields and influence-function controlling abilities. This is verified by the simulations and the contrast experiments of two prototypes: one of which utilizes air convection, the other uses water convection. Controlling the thermal fields will greatly promote the influence-function adjustability and aberration correction ability of thermal DMs.