Yun Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yun Li has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
Huiquan Bi
Forest Science, NSW Department of Primary Industries, Parramatta, Australia
5 shared publicationsDuncan Watt
Snowy Region, Forestry Corporation of NSW, Tumut, Australia
3 shared publications- Fabiano Ximenes
New South Wales Department of Primary Industries, Parramatta, NSW 2150, Australia
2 shared publications Gao Jiang
School of Information Science and Technology, School of Artificial Intelligence, Beijing Forestry University, Beijing 100083, People's Republic of China
2 shared publications- Hou-Ling Wang
State Key Laboratory of Tree Genetics and Breeding, School of Biological Sciences and Technology, Beijing Forestry University, Beijing 100083, China
2 shared publications - Huiquan Bi
Forest Science, NSW Department of Primary Industries—Forestry, Level 30, 4 Parramatta Square, 12 Darcy St., Parramatta, NSW 2150, Australia
2 shared publications
Latest Publications
- Open Access
- 23 October 2026
- Published by MDPI AG in Remote Sensing
- Vol. 18 (21) , 3645
GUF-Net: Gated Uncertainty-Aware Fusion Network for Robust Building Change Detection in Remote Sensing Images
Building change detection (BCD) in high-resolution remote sensing imagery has achieved considerable accuracy with deep learning, yet most existing models still suffer from performance degradation under noise interference, partly due to inadequate uncertainty handling. To address this, we propose GUF-Net, a gated uncertainty-aware fusion network that integrates three key components: (1) a pixel-wise uncertainty modeling module that generates a pixel-level uncertainty map alongside the change probability map; (2) an adaptive gated fusion mechanism that dynamically weights multi-scale features and uncertainty information; and (3) a redesigned loss function that can directly supervise the uncertainty estimation, ensuring that it reflects prediction reliability rather than serving as an unsupervised auxiliary output. Experiments on three public benchmarks (WHU-CD, CDD, and LEVIR-CD) show that GUF-Net achieves competitive F1 scores of 93.88%, 96.55%, and 90.43%, respectively, ranking top three on CDD and WHU-CD, while its advantage is less pronounced on LEVIR-CD. Under the strongest Gaussian, salt-and-pepper, and speckle noise conditions on the WHU-CD test set, the F1 score of GUF-Net decreases by only 0.86, 3.95, and 1.29 percentage points, respectively, exhibiting the smallest degradation among the compared models. Unlike existing uncertainty-aware baselines evaluated solely on clean data, GUF-Net jointly supervises evidential pixel uncertainty and routes it through adaptive gating, enabling stable fusion under degraded imaging conditions. Ablation studies confirm that the gated fusion, uncertainty injection, and global context aggregation each contribute to the overall performance. These results suggest that explicit uncertainty modeling and adaptive fusion can improve the reliability of BCD under noisy conditions, although there remains room for further improvement in clean-set accuracy and model efficiency.
- 23 October 2026
- Published by MDPI AG in Remote Sensing
- Vol. 18 (21) , 3645
Open AccessGUF-Net: Gated Uncertainty-Aware Fusion Network for Robust Building Change Detection in Remote Sensing Images
Building change detection (BCD) in high-resolution remote sensing imagery has achieved considerable accuracy with deep learning, yet most existing models still suffer from performance degradation under noise interference, partly due to inadequate uncertainty handling. To address this, we propose GUF-Net, a gated uncertainty-aware fusion network that integrates three key components: (1) a pixel-wise uncertainty modeling module that generates a pixel-level uncertainty map alongside the change probability map; (2) an adaptive gated fusion mechanism that dynamically weights multi-scale features and uncertainty information; and (3) a redesigned loss function that can directly supervise the uncertainty estimation, ensuring that it reflects prediction reliability rather than serving as an unsupervised auxiliary output. Experiments on three public benchmarks (WHU-CD, CDD, and LEVIR-CD) show that GUF-Net achieves competitive F1 scores of 93.88%, 96.55%, and 90.43%, respectively, ranking top three on CDD and WHU-CD, while its advantage is less pronounced on LEVIR-CD. Under the strongest Gaussian, salt-and-pepper, and speckle noise conditions on the WHU-CD test set, the F1 score of GUF-Net decreases by only 0.86, 3.95, and 1.29 percentage points, respectively, exhibiting the smallest degradation among the compared models. Unlike existing uncertainty-aware baselines evaluated solely on clean data, GUF-Net jointly supervises evidential pixel uncertainty and routes it through adaptive gating, enabling stable fusion under degraded imaging conditions. Ablation studies confirm that the gated fusion, uncertainty injection, and global context aggregation each contribute to the overall performance. These results suggest that explicit uncertainty modeling and adaptive fusion can improve the reliability of BCD under noisy conditions, although there remains room for further improvement in clean-set accuracy and model efficiency.
- Open Access
- 15 September 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17 (18) , 3192
An Interpretable Wheat Yield Estimation Model Using Time Series Remote Sensing Data and Considering Meteorological and Soil Influences
Accurate estimation of winter wheat yield is essential for ensuring food security. Recent studies on winter wheat yield estimation based on deep learning methods rarely explore the interpretability of the model from the perspective of crop growth mechanism. In this study, a multiscale winter wheat yield estimation framework (called MultiScaleWheatNet model) was proposed, which was based on time series remote sensing data and further takes into account meteorological and soil factors that affect wheat growth. The model integrated multimodal data from different temporal and spatial scales, extracting growth characteristics specific to particular growth stage based on the growth pattern of wheat phenological phase. It focuses on enhancing model accuracy and interpretability from the perspective of crop growth mechanisms. The results showed that, compared to mainstream deep learning architectures, the MultiScaleWheatNet model had good estimation accuracy in both rain-fed and irrigated farmlands, with higher accuracy in rain-fed farmlands (R2 = 0.86, RMSE = 0.15 t·ha−1). At the county scale, the accuracy of the model in estimating winter wheat yield was stable across three years (from 2021 to 2023, R2 ≥ 0.35, RMSE ≤ 0.73 t·ha−1, nRMSE ≤ 20.4%). Model interpretability results showed that, taking all growth stages together, the remotely sensed indices had relatively high contribution to wheat yield, with roughly equal contributions from meteorological and soil variables. From the perspective of the growth stages, the contribution of LAI in remote sensing factors demonstrated greater stability throughout the growth stages, particularly during the jointing, heading-filling and milky maturity stage; the combined impact of meteorological factors exhibited a discernible temporal sequence, initially dominated by water availability and subsequently transitioning to temperature and sunlight in the middle and late stages; soil factors demonstrated a close correlation with soil pH and cation exchange capacity in the early and late stages, and with organic carbon content in the middle stage. By deeply combining remote sensing, meteorological and soil data, the framework not only achieves high accuracy in winter wheat yield estimation, but also effectively interprets the dynamic influence mechanism of remote sensing data on yield from the perspective of crop growth, providing a scientific basis for precise field water and fertiliser management and agricultural decision-making.
- 15 September 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17 (18) , 3192
Open AccessAn Interpretable Wheat Yield Estimation Model Using Time Series Remote Sensing Data and Considering Meteorological and Soil Influences
Accurate estimation of winter wheat yield is essential for ensuring food security. Recent studies on winter wheat yield estimation based on deep learning methods rarely explore the interpretability of the model from the perspective of crop growth mechanism. In this study, a multiscale winter wheat yield estimation framework (called MultiScaleWheatNet model) was proposed, which was based on time series remote sensing data and further takes into account meteorological and soil factors that affect wheat growth. The model integrated multimodal data from different temporal and spatial scales, extracting growth characteristics specific to particular growth stage based on the growth pattern of wheat phenological phase. It focuses on enhancing model accuracy and interpretability from the perspective of crop growth mechanisms. The results showed that, compared to mainstream deep learning architectures, the MultiScaleWheatNet model had good estimation accuracy in both rain-fed and irrigated farmlands, with higher accuracy in rain-fed farmlands (R2 = 0.86, RMSE = 0.15 t·ha−1). At the county scale, the accuracy of the model in estimating winter wheat yield was stable across three years (from 2021 to 2023, R2 ≥ 0.35, RMSE ≤ 0.73 t·ha−1, nRMSE ≤ 20.4%). Model interpretability results showed that, taking all growth stages together, the remotely sensed indices had relatively high contribution to wheat yield, with roughly equal contributions from meteorological and soil variables. From the perspective of the growth stages, the contribution of LAI in remote sensing factors demonstrated greater stability throughout the growth stages, particularly during the jointing, heading-filling and milky maturity stage; the combined impact of meteorological factors exhibited a discernible temporal sequence, initially dominated by water availability and subsequently transitioning to temperature and sunlight in the middle and late stages; soil factors demonstrated a close correlation with soil pH and cation exchange capacity in the early and late stages, and with organic carbon content in the middle stage. By deeply combining remote sensing, meteorological and soil data, the framework not only achieves high accuracy in winter wheat yield estimation, but also effectively interprets the dynamic influence mechanism of remote sensing data on yield from the perspective of crop growth, providing a scientific basis for precise field water and fertiliser management and agricultural decision-making.
- 20 January 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 300, 139941
MCTASmRNA: A deep learning framework for alternative splicing events classification
- 20 January 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 300, 139941
MCTASmRNA: A deep learning framework for alternative splicing events classification
- Open Access
- 24 June 2024
- Published by Springer Nature in BMC Genomics
- Vol. 25 (1) , 1-21
A comprehensive workflow for optimizing RNA-seq data analysis
Background: Current RNA-seq analysis software for RNA-seq data tends to use similar parameters across different species without considering species-specific differences. However, the suitability and accuracy of these tools may vary when analyzing data from different species, such as humans, animals, plants, fungi, and bacteria. For most laboratory researchers lacking a background in information science, determining how to construct an analysis workflow that meets their specific needs from the array of complex analytical tools available poses a significant challenge.Results: By utilizing RNA-seq data from plants, animals, and fungi, it was observed that different analytical tools demonstrate some variations in performance when applied to different species. A comprehensive experiment was conducted specifically for analyzing plant pathogenic fungal data, focusing on differential gene analysis as the ultimate goal. In this study, 288 pipelines using different tools were applied to analyze five fungal RNA-seq datasets, and the performance of their results was evaluated based on simulation. This led to the establishment of a relatively universal and superior fungal RNA-seq analysis pipeline that can serve as a reference, and certain standards for selecting analysis tools were derived for reference. Additionally, we compared various tools for alternative splicing analysis. The results based on simulated data indicated that rMATS remained the optimal choice, although consideration could be given to supplementing with tools such as SpliceWiz.Conclusion: The experimental results demonstrate that, in comparison to the default software parameter configurations, the analysis combination results after tuning can provide more accurate biological insights. It is beneficial to carefully select suitable analysis software based on the data, rather than indiscriminately choosing tools, in order to achieve high-quality analysis results more efficiently.
- 24 June 2024
- Published by Springer Nature in BMC Genomics
- Vol. 25 (1) , 1-21
Open AccessA comprehensive workflow for optimizing RNA-seq data analysis
Background: Current RNA-seq analysis software for RNA-seq data tends to use similar parameters across different species without considering species-specific differences. However, the suitability and accuracy of these tools may vary when analyzing data from different species, such as humans, animals, plants, fungi, and bacteria. For most laboratory researchers lacking a background in information science, determining how to construct an analysis workflow that meets their specific needs from the array of complex analytical tools available poses a significant challenge.Results: By utilizing RNA-seq data from plants, animals, and fungi, it was observed that different analytical tools demonstrate some variations in performance when applied to different species. A comprehensive experiment was conducted specifically for analyzing plant pathogenic fungal data, focusing on differential gene analysis as the ultimate goal. In this study, 288 pipelines using different tools were applied to analyze five fungal RNA-seq datasets, and the performance of their results was evaluated based on simulation. This led to the establishment of a relatively universal and superior fungal RNA-seq analysis pipeline that can serve as a reference, and certain standards for selecting analysis tools were derived for reference. Additionally, we compared various tools for alternative splicing analysis. The results based on simulated data indicated that rMATS remained the optimal choice, although consideration could be given to supplementing with tools such as SpliceWiz.Conclusion: The experimental results demonstrate that, in comparison to the default software parameter configurations, the analysis combination results after tuning can provide more accurate biological insights. It is beneficial to carefully select suitable analysis software based on the data, rather than indiscriminately choosing tools, in order to achieve high-quality analysis results more efficiently.
- 30 June 2023
- Published by Springer Nature in Journal of Forestry Research
- Vol. 34 (6) , 1899-1914
Characterizing prediction errors of a new tree height model for cut-to-length Pinus radiata stems through the Burr Type XII distribution
- 30 June 2023
- Published by Springer Nature in Journal of Forestry Research
- Vol. 34 (6) , 1899-1914
Characterizing prediction errors of a new tree height model for cut-to-length Pinus radiata stems through the Burr Type XII distribution
- Open Access
Estimation and Spatial Mapping of Residue Biomass following CTL Harvesting in Pinus radiata Plantations: An Application of Harvester Data Analytics
The utilization of forest harvest residues for renewable bioenergy production and bioproducts has increasingly become an integrated part of forestry that helps to meet the needs of climate change mitigation and a future carbon neutral economy. An essential element in the planning of any harvesting residue recovery operation is a reliable assessment of the quantity and quality of residue biomass and its composition over a harvest area. With the now widely adopted cut-to-length (CTL) at the stump harvesting system in Pinus radiata plantations in Australia, harvesting residues left on site are significantly larger in quantity and spatially more dispersed over a harvest area in comparison to the more traditional whole-tree harvesting. The conventional approach of assessing forest harvest residues through sample plots, transects, or small study blocks has provided site-specific estimates of residue biomass. However, these estimates cannot be readily extrapolated over the plantation landscape, which varies in silviculture, site, and stand conditions. To overcome this limitation, this study relied on harvester data analytics to obtain spatially explicit estimates of residue biomass using an example data set from harvested plantations of three stand types: unthinned (T0), thinned once (T1), and thinned twice (T2). Three methods of integrating biomass equations with harvester data were compared for residue biomass estimation: (1) applying individual tree biomass equations to harvested stems, (2) applying stand-level biomass equations to gridded harvester data, and (3) integrating estimates from the first approach with recorded and estimated waste volumes of harvested stems. The estimates of total residue biomass obtained using the three methods through harvester data analytics varied between 56.2 and 156.4 t/ha in green weight across the three stand types. These estimates were validated indirectly through ex situ sample plots and proved to be comparable to the quantities of residue biomass assessed using conventional sample plots, transects, or small blocks following CTL harvesting of rotation age P. radiata plantations elsewhere in Australia. Among the three methods, the third method made the most intensive use of the harvester data and provided the most realistic estimates of residue biomass. Spatial mapping of the estimated total and component residue biomass will assist the operational planning of residue recovery and site-specific nutrient management for the long-term sustainability of P. radiata plantations.
Open AccessEstimation and Spatial Mapping of Residue Biomass following CTL Harvesting in Pinus radiata Plantations: An Application of Harvester Data Analytics
The utilization of forest harvest residues for renewable bioenergy production and bioproducts has increasingly become an integrated part of forestry that helps to meet the needs of climate change mitigation and a future carbon neutral economy. An essential element in the planning of any harvesting residue recovery operation is a reliable assessment of the quantity and quality of residue biomass and its composition over a harvest area. With the now widely adopted cut-to-length (CTL) at the stump harvesting system in Pinus radiata plantations in Australia, harvesting residues left on site are significantly larger in quantity and spatially more dispersed over a harvest area in comparison to the more traditional whole-tree harvesting. The conventional approach of assessing forest harvest residues through sample plots, transects, or small study blocks has provided site-specific estimates of residue biomass. However, these estimates cannot be readily extrapolated over the plantation landscape, which varies in silviculture, site, and stand conditions. To overcome this limitation, this study relied on harvester data analytics to obtain spatially explicit estimates of residue biomass using an example data set from harvested plantations of three stand types: unthinned (T0), thinned once (T1), and thinned twice (T2). Three methods of integrating biomass equations with harvester data were compared for residue biomass estimation: (1) applying individual tree biomass equations to harvested stems, (2) applying stand-level biomass equations to gridded harvester data, and (3) integrating estimates from the first approach with recorded and estimated waste volumes of harvested stems. The estimates of total residue biomass obtained using the three methods through harvester data analytics varied between 56.2 and 156.4 t/ha in green weight across the three stand types. These estimates were validated indirectly through ex situ sample plots and proved to be comparable to the quantities of residue biomass assessed using conventional sample plots, transects, or small blocks following CTL harvesting of rotation age P. radiata plantations elsewhere in Australia. Among the three methods, the third method made the most intensive use of the harvester data and provided the most realistic estimates of residue biomass. Spatial mapping of the estimated total and component residue biomass will assist the operational planning of residue recovery and site-specific nutrient management for the long-term sustainability of P. radiata plantations.
- Open Access
- 7 April 2021
- Published by Springer Nature in Journal of Forestry Research
- Vol. 32 (6) , 2265-2289
Additive predictions of aboveground stand biomass in commercial logs and harvest residues for rotation age Pinus radiata plantations in New South Wales, Australia
- 7 April 2021
- Published by Springer Nature in Journal of Forestry Research
- Vol. 32 (6) , 2265-2289
Open AccessAdditive predictions of aboveground stand biomass in commercial logs and harvest residues for rotation age Pinus radiata plantations in New South Wales, Australia
- Open Access
- 16 December 2019
- Published by Springer Nature in Journal of Forestry Research
- Vol. 32 (1) , 21-41
A new model for predicting the total tree height for stems cut-to-length by harvesters in Pinus radiata plantations
A new model for predicting the total tree height for harvested stems from cut-to-length (CTL) harvester data was constructed forPinus radiata(D.Don) following a conceptual analysis of relative stem profiles, comparisons of candidate models forms and extensive selections of predictor variables. Stem profiles of more than 3000 trees in a taper data set were each processed 6 times through simulated log cutting to generate the data required for this purpose. The CTL simulations not only mimicked but also covered the full range of cutting patterns of nearly 0.45 × 106stems harvested during both thinning and harvesting operations. The single-equation model was estimated through the multiple-equation generalized method of moments estimator to obtain efficient and consistent parameter estimates in the presence of error correlation and heteroscedasticity that were inherent to the systematic structure of the data. The predictive performances of our new model in its linear and nonlinear form were evaluated through a leave-one-tree-out cross validation process and compared against that of the only such existing model. The evaluations and comparisons were made through benchmarking statistics both globally over the entire data space and locally within specific subdivisions of the data space. These statistics indicated that the nonlinear form of our model was the best and its linear form ranked second. The prediction accuracy of our nonlinear model improved when the total log length represented more than 20% of the total tree height. The poorer performance of the existing model was partly attributed to the high degree of multicollinearity among its predictor variables, which led to highly variable and unstable parameter estimates. Our new model will facilitate and widen the utilization of harvester data far beyond the current limited use for monitoring and reporting log productions inP. radiataplantations. It will also facilitate the estimation of bark thickness and help make harvester data a potential source of taper data to reduce the intensity and cost of the conventional destructive taper sampling in the field. Although developed forP. radiata, the mathematical form of our new model will be applicable to other tree species for which CTL harvester data are routinely captured during thinning and harvesting operations.
- 16 December 2019
- Published by Springer Nature in Journal of Forestry Research
- Vol. 32 (1) , 21-41
Open AccessA new model for predicting the total tree height for stems cut-to-length by harvesters in Pinus radiata plantations
A new model for predicting the total tree height for harvested stems from cut-to-length (CTL) harvester data was constructed forPinus radiata(D.Don) following a conceptual analysis of relative stem profiles, comparisons of candidate models forms and extensive selections of predictor variables. Stem profiles of more than 3000 trees in a taper data set were each processed 6 times through simulated log cutting to generate the data required for this purpose. The CTL simulations not only mimicked but also covered the full range of cutting patterns of nearly 0.45 × 106stems harvested during both thinning and harvesting operations. The single-equation model was estimated through the multiple-equation generalized method of moments estimator to obtain efficient and consistent parameter estimates in the presence of error correlation and heteroscedasticity that were inherent to the systematic structure of the data. The predictive performances of our new model in its linear and nonlinear form were evaluated through a leave-one-tree-out cross validation process and compared against that of the only such existing model. The evaluations and comparisons were made through benchmarking statistics both globally over the entire data space and locally within specific subdivisions of the data space. These statistics indicated that the nonlinear form of our model was the best and its linear form ranked second. The prediction accuracy of our nonlinear model improved when the total log length represented more than 20% of the total tree height. The poorer performance of the existing model was partly attributed to the high degree of multicollinearity among its predictor variables, which led to highly variable and unstable parameter estimates. Our new model will facilitate and widen the utilization of harvester data far beyond the current limited use for monitoring and reporting log productions inP. radiataplantations. It will also facilitate the estimation of bark thickness and help make harvester data a potential source of taper data to reduce the intensity and cost of the conventional destructive taper sampling in the field. Although developed forP. radiata, the mathematical form of our new model will be applicable to other tree species for which CTL harvester data are routinely captured during thinning and harvesting operations.
- Open Access
Product and Residue Biomass Equations for Individual Trees in Rotation Age Pinus radiata Stands under Three Thinning Regimes in New South Wales, Australia
Using data from 239 trees that were destructively sampled and completely weighed in the field, four systems of nonlinear additive equations were developed for the estimation of product and residue fresh and dry weight of individual trees in rotation age (28 to 42 years) Pinus radiata stands under three thinning regimes: unthinned (T0), one thinning (T1) and two thinnings (T2). To cater for all practical applications, the four systems of equations included diameter at breast height overbark (DBHOB) as the only independent variable or both DBHOB and total tree height as predictors either with or without the incorporation of dummy variables for stand types. For all systems, the property of additivity was guaranteed by placing constraints on the structural parameters of the system equations. The parameter estimates were obtained by the generalized methods of moments (GMM) following a comparison with weighted nonlinear seemingly unrelated regression (WNSUR). Based on the predicted values from the system that had DBHOB as the predictor and dummy variables for stand types, the percentage of total tree fresh weight accounted for by residues increased from 14.8% to 20.5%, from 15.6% to 22.2% and from 13.9% to 18.7% for trees in the T0, T1 and T2 stands, respectively, as DBHOB increased from 15 to 70 cm. The corresponding changes in the percentage of residue dry weight were from 15.1% to 16.1%, from 15.7% to 17.1% and from 14.9% to 15.8% for the three stand types. In addition, two systems of allocative equations were developed to allocate the predicted product and residue biomass to their respective subcomponents. The system of allocative equations for product biomass predicted that sawlogs with bark accounted for 83% to 85% of product fresh weight and 82% to 87% of product dry weight over the same range of DBHOB. The predicted allocation of total residue dry weight to stump changed little, between 12% and 13%, over the same diameter range, but it was slightly higher for trees with DBHOB between 30 and 45 cm. The predicted allocation of total residue biomass to branches increased from 18% to 65% in fresh weight and from 18% to 57% in dry weight and that to waste decreased from 71% to 27% in fresh weight and from 70% to 32% in dry weight as DBHOB increased from 15 to 70 cm. Among the five biomass components, prediction accuracy was the lowest for pulpwood and waste. The systems of additive and allocative biomass equations developed in this study provided the first example of how the two approaches could be used together for the estimation of total tree, major and sub-component biomass. They will provide forest management with an enhanced capacity to more accurately estimate product and residue biomass of rotation age trees and thus to include the production of biomass for renewable energy generation in their management systems for P. radiata plantations.
Open AccessProduct and Residue Biomass Equations for Individual Trees in Rotation Age Pinus radiata Stands under Three Thinning Regimes in New South Wales, Australia
Using data from 239 trees that were destructively sampled and completely weighed in the field, four systems of nonlinear additive equations were developed for the estimation of product and residue fresh and dry weight of individual trees in rotation age (28 to 42 years) Pinus radiata stands under three thinning regimes: unthinned (T0), one thinning (T1) and two thinnings (T2). To cater for all practical applications, the four systems of equations included diameter at breast height overbark (DBHOB) as the only independent variable or both DBHOB and total tree height as predictors either with or without the incorporation of dummy variables for stand types. For all systems, the property of additivity was guaranteed by placing constraints on the structural parameters of the system equations. The parameter estimates were obtained by the generalized methods of moments (GMM) following a comparison with weighted nonlinear seemingly unrelated regression (WNSUR). Based on the predicted values from the system that had DBHOB as the predictor and dummy variables for stand types, the percentage of total tree fresh weight accounted for by residues increased from 14.8% to 20.5%, from 15.6% to 22.2% and from 13.9% to 18.7% for trees in the T0, T1 and T2 stands, respectively, as DBHOB increased from 15 to 70 cm. The corresponding changes in the percentage of residue dry weight were from 15.1% to 16.1%, from 15.7% to 17.1% and from 14.9% to 15.8% for the three stand types. In addition, two systems of allocative equations were developed to allocate the predicted product and residue biomass to their respective subcomponents. The system of allocative equations for product biomass predicted that sawlogs with bark accounted for 83% to 85% of product fresh weight and 82% to 87% of product dry weight over the same range of DBHOB. The predicted allocation of total residue dry weight to stump changed little, between 12% and 13%, over the same diameter range, but it was slightly higher for trees with DBHOB between 30 and 45 cm. The predicted allocation of total residue biomass to branches increased from 18% to 65% in fresh weight and from 18% to 57% in dry weight and that to waste decreased from 71% to 27% in fresh weight and from 70% to 32% in dry weight as DBHOB increased from 15 to 70 cm. Among the five biomass components, prediction accuracy was the lowest for pulpwood and waste. The systems of additive and allocative biomass equations developed in this study provided the first example of how the two approaches could be used together for the estimation of total tree, major and sub-component biomass. They will provide forest management with an enhanced capacity to more accurately estimate product and residue biomass of rotation age trees and thus to include the production of biomass for renewable energy generation in their management systems for P. radiata plantations.
- Open Access
- 7 November 2017
- Published by Springer Nature in Journal of Forestry Research
- Vol. 29 (1) , 13-33
Reconstructing the size of individual trees using log data from cut-to-length harvesters in Pinus radiata plantations: a case study in NSW, Australia
- 7 November 2017
- Published by Springer Nature in Journal of Forestry Research
- Vol. 29 (1) , 13-33
Open AccessReconstructing the size of individual trees using log data from cut-to-length harvesters in Pinus radiata plantations: a case study in NSW, Australia