Alon Manor
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alon Manor has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Ayala Ronen
Environmental Physics Department, Israel Institute for Biological Research (IIBR), Ness Ziona 7410001, Israel
3 shared publications - Tamir Tzadok
Israel Institute for Biological Research, P.O. Box 19, Ness Ziona 7410001, Israel
2 shared publications - Batya Parizer
Isreal Isntitute for Biological Research, Department of Environmental Physics
1 shared publication - David Avisar
Fredy & Nadine Herrmann Institute of Earth Sciences The Hebrew University of Jerusalem Jerusalem Israel
1 shared publication - Dietmar Oettl
Air Quality Control, Government of Styria, Graz, Austria
1 shared publication - Dorita Rostkier-Edelstein
Department of Environmental Physics, Environmental Sciences Division, Israel Institute for Biological Research, Ness Zyiona, Israel
1 shared publication
Latest Publications
- Open Access
- 26 August 2026
- Published by MDPI AG in Remote Sensing
- Vol. 18 (17) , 2879
A Closed-Form Statistical Expression for Evaluating Wind Speed and Direction Prediction Intervals from Doppler Lidar Arc Scans
Low-elevation Doppler wind lidar scans, known as arc scans, extend traditional vertical-profile measurements to horizontal, off-site locations. This technique is designed to enable measurements at multiple distant locations relative to the instrument. Arc-scan methods have been widely utilized in wind energy applications and are also a promising tool for environmental monitoring for hazard assessment. This method introduces specific challenges absent in traditional vertical profile scans. The limited scan angle restricts the number of wind orientations available for reliable vector extraction. A reliable method of estimating the uncertainty intervals for retrieved wind speed and direction in operational configurations is thus of interest. Here, we developed a closed-form statistical expression for evaluating wind speed and direction prediction intervals. Because rapid-update operational scenarios (such as real-time dispersion modeling) yield a limited number of scans, the framework is specifically designed to remain mathematically robust and computable using only diagonal variance terms, bypassing the need for numerically unstable cross-covariance matrices. The expression was tested against a lidar and sonic anemometry measurement campaign. The wind-arc alignment emerges as a major influencing parameter impacting uncertainty of both direction and speed retrievals. Conclusions regarding scan parameters and siting considerations are drawn.
- 26 August 2026
- Published by MDPI AG in Remote Sensing
- Vol. 18 (17) , 2879
Open AccessA Closed-Form Statistical Expression for Evaluating Wind Speed and Direction Prediction Intervals from Doppler Lidar Arc Scans
Low-elevation Doppler wind lidar scans, known as arc scans, extend traditional vertical-profile measurements to horizontal, off-site locations. This technique is designed to enable measurements at multiple distant locations relative to the instrument. Arc-scan methods have been widely utilized in wind energy applications and are also a promising tool for environmental monitoring for hazard assessment. This method introduces specific challenges absent in traditional vertical profile scans. The limited scan angle restricts the number of wind orientations available for reliable vector extraction. A reliable method of estimating the uncertainty intervals for retrieved wind speed and direction in operational configurations is thus of interest. Here, we developed a closed-form statistical expression for evaluating wind speed and direction prediction intervals. Because rapid-update operational scenarios (such as real-time dispersion modeling) yield a limited number of scans, the framework is specifically designed to remain mathematically robust and computable using only diagonal variance terms, bypassing the need for numerically unstable cross-covariance matrices. The expression was tested against a lidar and sonic anemometry measurement campaign. The wind-arc alignment emerges as a major influencing parameter impacting uncertainty of both direction and speed retrievals. Conclusions regarding scan parameters and siting considerations are drawn.
- Open Access
- 29 August 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (17) , 4264
Profiling the Planetary Boundary Layer Wind with a StreamLine XR Doppler LiDAR: Comparison to In-Situ Observations and WRF Model Simulations
Halo-Photonics StreamLine XR Doppler LiDAR measurements are performed using several scan configurations (Velocity Azimuth Display-VAD and Doppler Beam Swing-DBS) and elevation angles of 60° and 80°. The measurements are compared to wind observations conducted by various in situ instruments (tethered balloon, meteorological mast, and radiosondes). Good agreement is obtained, with R2 over 0.90 for wind speed and a standard error ≤ 18.6° for wind direction. The best performance was attained for lower elevation scans (60°), which is consistent with the higher spatial horizontal homogeneity exhibited by lower angle scans. VAD and DBS scans performed almost equally well with slight advantage for VAD in higher altitudes and for DBS for lower altitudes. The boundary layer structure along a diurnal cycle is analyzed by utilizing retrieved backscatter data and wind measurements in conjunction with Weather Research and Forecast (WRF) simulations. The presence of multiple inversions which allow the coexistence of different layers within the studied profile is also verified using data acquired by several radiosondes. Synergic use of LiDAR data with WRF simulations for low SNR regions is demonstrated.
- 29 August 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (17) , 4264
Open AccessProfiling the Planetary Boundary Layer Wind with a StreamLine XR Doppler LiDAR: Comparison to In-Situ Observations and WRF Model Simulations
Halo-Photonics StreamLine XR Doppler LiDAR measurements are performed using several scan configurations (Velocity Azimuth Display-VAD and Doppler Beam Swing-DBS) and elevation angles of 60° and 80°. The measurements are compared to wind observations conducted by various in situ instruments (tethered balloon, meteorological mast, and radiosondes). Good agreement is obtained, with R2 over 0.90 for wind speed and a standard error ≤ 18.6° for wind direction. The best performance was attained for lower elevation scans (60°), which is consistent with the higher spatial horizontal homogeneity exhibited by lower angle scans. VAD and DBS scans performed almost equally well with slight advantage for VAD in higher altitudes and for DBS for lower altitudes. The boundary layer structure along a diurnal cycle is analyzed by utilizing retrieved backscatter data and wind measurements in conjunction with Weather Research and Forecast (WRF) simulations. The presence of multiple inversions which allow the coexistence of different layers within the studied profile is also verified using data acquired by several radiosondes. Synergic use of LiDAR data with WRF simulations for low SNR regions is demonstrated.
- 7 July 2020
- Published by openRxiv
Examining the protection efficacy of face shields against cough aerosol droplets using water sensitive papers
Simple plastic face shields have many advantages compared to regular medical masks. They are easily cleaned for reuse and comfortable to wear. In light of the spreading COVID-19 pandemic, the potential of face shields as a substitution for medical masks, as a recommendation to the general population, was tested. Testing the efficacy of the protective equipment utilized a cough simulator that was carefully tuned to replicate human cough in terms of droplet size distribution and outlet velocity. The tested protective equipment was worn on a manikin head simulating human breathing. An Aerodynamic Particle Sizer (APS) was used to analyze the concentration and size distribution of small particles that reach the manikin head respiration pathways. Additionally, Water sensitive papers were taped over and under the tested protective equipment, and were subsequently photographed and analyzed. For droplets larger than 3μm by diameter, the efficiency of shields to block cough droplets was found to be comparable to that of regular medical masks, with enhanced protection on face parts the mask does not cover. Additionally, for finer particles, of the order 0.3 to few microns, a shield was found to perform even better, blocking about 10 times more fine particles than the medical mask. This implies that for the general population that is not intendedly exposed to confirmed infected individuals, recommending the use of face shields as an alternative to medical masks should be considered.
- 7 July 2020
- Published by openRxiv
Examining the protection efficacy of face shields against cough aerosol droplets using water sensitive papers
Simple plastic face shields have many advantages compared to regular medical masks. They are easily cleaned for reuse and comfortable to wear. In light of the spreading COVID-19 pandemic, the potential of face shields as a substitution for medical masks, as a recommendation to the general population, was tested. Testing the efficacy of the protective equipment utilized a cough simulator that was carefully tuned to replicate human cough in terms of droplet size distribution and outlet velocity. The tested protective equipment was worn on a manikin head simulating human breathing. An Aerodynamic Particle Sizer (APS) was used to analyze the concentration and size distribution of small particles that reach the manikin head respiration pathways. Additionally, Water sensitive papers were taped over and under the tested protective equipment, and were subsequently photographed and analyzed. For droplets larger than 3μm by diameter, the efficiency of shields to block cough droplets was found to be comparable to that of regular medical masks, with enhanced protection on face parts the mask does not cover. Additionally, for finer particles, of the order 0.3 to few microns, a shield was found to perform even better, blocking about 10 times more fine particles than the medical mask. This implies that for the general population that is not intendedly exposed to confirmed infected individuals, recommending the use of face shields as an alternative to medical masks should be considered.
- Open Access
- 26 December 2019
- Published by MDPI AG in Atmosphere
- Vol. 11 (1) , 27
Concentration Fluctuations and Odor Dispersion in Lagrangian Models
In this paper, a review of the Lagrangian stochastic models developed in the last decades for the simulation of the concentration–fluctuation dispersion is presented. The main approaches available in the literature are described and their ability in reproducing the higher order moments of the probability density function is discussed. Then, the Lagrangian approaches for evaluating of the odor annoyance are presented. It is worth to notice that, while Lagrangian stochastic models for mean concentrations are well-known and their ability in correctly reproducing the observation is well assessed, concerning concentration fluctuations the approaches are often new and unknown for most of the scientific community.
- 26 December 2019
- Published by MDPI AG in Atmosphere
- Vol. 11 (1) , 27
Open AccessConcentration Fluctuations and Odor Dispersion in Lagrangian Models
In this paper, a review of the Lagrangian stochastic models developed in the last decades for the simulation of the concentration–fluctuation dispersion is presented. The main approaches available in the literature are described and their ability in reproducing the higher order moments of the probability density function is discussed. Then, the Lagrangian approaches for evaluating of the odor annoyance are presented. It is worth to notice that, while Lagrangian stochastic models for mean concentrations are well-known and their ability in correctly reproducing the observation is well assessed, concerning concentration fluctuations the approaches are often new and unknown for most of the scientific community.
- 1 February 2019
- Published by Elsevier in Atmospheric Environment
- Vol. 198, 313-323
High-fidelity simulations of Chemical Plume Tracing in the planetary boundary layer
- 1 February 2019
- Published by Elsevier in Atmospheric Environment
- Vol. 198, 313-323
High-fidelity simulations of Chemical Plume Tracing in the planetary boundary layer
- 31 October 2013
- Published by Springer Nature in Boundary-Layer Meteorology
- Vol. 150 (2) , 327-340
A Stochastic Single-Particle Lagrangian Model for the Concentration Fluctuations in a Plume Dispersing Inside an Urban Canopy
- 31 October 2013
- Published by Springer Nature in Boundary-Layer Meteorology
- Vol. 150 (2) , 327-340
A Stochastic Single-Particle Lagrangian Model for the Concentration Fluctuations in a Plume Dispersing Inside an Urban Canopy