Abdelkibir Benelfellah
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Abdelkibir Benelfellah has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Olawale Monsur Sanusi
INSA CVL Univ. Tours, Univ. Orléans, LaMé Blois France
5 shared publications - Nourredine Aït Hocine
INSA CVL, Univ. Tours, Univ. Orléans, LaMé, Blois Cedex, France
4 shared publications - Damien Halm
Pprime Institute (UPR3346), CNRS, ISAE-ENSMA, Université de Poitiers, BP 40109, F-86961 Futuroscope Chasseneuil Cedex, France
2 shared publications Denis Bertheau
Institute P’, UPR 3346 CNRS, ISAE-ENSMA, Université de Poitiers, Futuroscope, France
2 shared publications- Dimitrios N. Bikiaris
Laboratory of Polymer Chemistry and Technology, Department of Chemistry, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
2 shared publications Michel Gratton
562120 INSA CVL , University of Tours, University of Orléans , LaMé, 3 Rue de la Chocolaterie – CS 23410, 41034 Blois cedex , France
2 shared publications
Latest Publications
- 31 March 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Contribution à la modélisation de l'anisotropie induite par endommagement d'un matériau agrégataire énergétique
Le matériau composite agrégataire énergétique étudié a un comportement viscoélastique endommageable sensible à la pression de confinement et à la température. Ces travaux concernent la modélisation de l'anisotropie induite par endommagement avec deux objectifs principaux. Dans un premier temps, le caractère anisotrope de l'endommagement est mis en évidence expérimentalement. Des essais alternant tension et compression permettant d'observer l'effet unilatéral d'endommagement. Ensuite, un modèle de comportement est développé pour le matériau d'étude. Des modèles pertinents sont tout d'abord comparés. Le modèle le plus approprié est ensuite amélioré par l'ajout de mécanismes d'endommagement, d'effectivité du dommage et d'un mécanisme de plasticité. Les données expérimentales sont utilisées pour identifier les paramètres du modèle. Ce dernier a été ensuite implémenté dans un logiciel de calcul aux éléments finis (Abaqus / standard) sous la forme d'une procédure Fortran (UMAT). Différents types de chargements sont simulés et confrontés aux résultats expérimentaux.
- 31 March 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Contribution à la modélisation de l'anisotropie induite par endommagement d'un matériau agrégataire énergétique
Le matériau composite agrégataire énergétique étudié a un comportement viscoélastique endommageable sensible à la pression de confinement et à la température. Ces travaux concernent la modélisation de l'anisotropie induite par endommagement avec deux objectifs principaux. Dans un premier temps, le caractère anisotrope de l'endommagement est mis en évidence expérimentalement. Des essais alternant tension et compression permettant d'observer l'effet unilatéral d'endommagement. Ensuite, un modèle de comportement est développé pour le matériau d'étude. Des modèles pertinents sont tout d'abord comparés. Le modèle le plus approprié est ensuite amélioré par l'ajout de mécanismes d'endommagement, d'effectivité du dommage et d'un mécanisme de plasticité. Les données expérimentales sont utilisées pour identifier les paramètres du modèle. Ce dernier a été ensuite implémenté dans un logiciel de calcul aux éléments finis (Abaqus / standard) sous la forme d'une procédure Fortran (UMAT). Différents types de chargements sont simulés et confrontés aux résultats expérimentaux.
- 7 October 2025
- Published by Wiley in Polymer Composites
- Vol. 47 (6) , 5518-5527
Rheological and Nonlinear Mechanical Behavior of PLA / MWCNT / MMT Nanocomposites Under Cyclic Loading: Influence of Hybrid Filler Concentration and Dispersion
This study examines the rheological and nonlinear mechanical behavior of polylactic acid (PLA) nanocomposites reinforced with hybrid multi‐walled carbon nanotubes (MWCNTs) and montmorillonite (MMT) nanoplatelets. Three hybrid compositions were investigated, all maintaining a fixed MMT:MWCNT weight ratio of 2:1, and compared against neat PLA. Oscillatory shear rheometry revealed that, at low frequencies, the hybrid nanocomposite with 2 wt% total filler content exhibited a frequency‐independent storage modulus and yield stress—indicative of pseudo‐solid‐like behavior and the formation of a percolated filler network. Cyclic tensile testing further demonstrated enhanced mechanical performance, with the 2 wt% hybrid sample showing a 25% increase in elastic modulus and a 38% improvement in toughness under cyclic loading compared to neat PLA. Notably, the incorporation of 1.0 wt% MMT/MWCNT led to significant reductions in deformation‐related degradation: 60% in damage and 100% in plasticity. Transmission electron microscopy (TEM) confirmed a homogeneous dispersion of the hybrid fillers, which supports the observed synergistic improvements in both rheological and mechanical properties. These findings highlight the effectiveness of MMT/MWCNT nanofillers in tailoring the structure–property relationships of PLA‐based materials. The resulting nanocomposites offer enhanced performance and processability, making them promising candidates for structural, packaging, and automotive applications where lightweight, biodegradable, and mechanically robust materials are essential.
- 7 October 2025
- Published by Wiley in Polymer Composites
- Vol. 47 (6) , 5518-5527
Rheological and Nonlinear Mechanical Behavior of PLA / MWCNT / MMT Nanocomposites Under Cyclic Loading: Influence of Hybrid Filler Concentration and Dispersion
This study examines the rheological and nonlinear mechanical behavior of polylactic acid (PLA) nanocomposites reinforced with hybrid multi‐walled carbon nanotubes (MWCNTs) and montmorillonite (MMT) nanoplatelets. Three hybrid compositions were investigated, all maintaining a fixed MMT:MWCNT weight ratio of 2:1, and compared against neat PLA. Oscillatory shear rheometry revealed that, at low frequencies, the hybrid nanocomposite with 2 wt% total filler content exhibited a frequency‐independent storage modulus and yield stress—indicative of pseudo‐solid‐like behavior and the formation of a percolated filler network. Cyclic tensile testing further demonstrated enhanced mechanical performance, with the 2 wt% hybrid sample showing a 25% increase in elastic modulus and a 38% improvement in toughness under cyclic loading compared to neat PLA. Notably, the incorporation of 1.0 wt% MMT/MWCNT led to significant reductions in deformation‐related degradation: 60% in damage and 100% in plasticity. Transmission electron microscopy (TEM) confirmed a homogeneous dispersion of the hybrid fillers, which supports the observed synergistic improvements in both rheological and mechanical properties. These findings highlight the effectiveness of MMT/MWCNT nanofillers in tailoring the structure–property relationships of PLA‐based materials. The resulting nanocomposites offer enhanced performance and processability, making them promising candidates for structural, packaging, and automotive applications where lightweight, biodegradable, and mechanically robust materials are essential.
- 20 May 2025
- Published by Wiley in Polymer Composites
- Vol. 46 (15) , 14461-14475
Hybridization Effects on the Mechanical and Aging Behavior of Elium Acrylic‐Based Flax‐Glass Fiber Composites
This study examines the hybridization effect of flax–glass fiber‐reinforced Elium acrylic polymer composites, with a particular emphasis on their mechanical properties, viscoelastic behavior, and diffusion kinetics. For this purpose, hybrid composites were fabricated by combining flax and glass fiber laminates with various stacking sequences using vacuum molding and subjected to environmental aging at room temperature. The primary objective was to evaluate the performance of these hybrid composites in comparison to flax fiber laminate composites. The results demonstrate that hybridizing flax fibers with glass fibers significantly mitigates the degradation of mechanical properties induced by aging. Notably, hybrid composites exhibit a significant improvement in both Young's modulus and tensile strength compared to pure flax fiber laminate composites. Dynamic mechanical analysis (DMA) further reveals that hybrid composites achieve marked enhancements in storage modulus and glass transition temperature, indicating improved viscoelastic behavior. Scanning electron microscopy (SEM) analyses performed on post‐tensile and aging tests highlight a reduction in microcrack propagation due to hybridization. These findings underscore the role of glass fibers in enhancing the durability and overall performance of flax fiber composites, making them a promising candidate for applications requiring sustained exposure to aggressive environments.
- 20 May 2025
- Published by Wiley in Polymer Composites
- Vol. 46 (15) , 14461-14475
Hybridization Effects on the Mechanical and Aging Behavior of Elium Acrylic‐Based Flax‐Glass Fiber Composites
This study examines the hybridization effect of flax–glass fiber‐reinforced Elium acrylic polymer composites, with a particular emphasis on their mechanical properties, viscoelastic behavior, and diffusion kinetics. For this purpose, hybrid composites were fabricated by combining flax and glass fiber laminates with various stacking sequences using vacuum molding and subjected to environmental aging at room temperature. The primary objective was to evaluate the performance of these hybrid composites in comparison to flax fiber laminate composites. The results demonstrate that hybridizing flax fibers with glass fibers significantly mitigates the degradation of mechanical properties induced by aging. Notably, hybrid composites exhibit a significant improvement in both Young's modulus and tensile strength compared to pure flax fiber laminate composites. Dynamic mechanical analysis (DMA) further reveals that hybrid composites achieve marked enhancements in storage modulus and glass transition temperature, indicating improved viscoelastic behavior. Scanning electron microscopy (SEM) analyses performed on post‐tensile and aging tests highlight a reduction in microcrack propagation due to hybridization. These findings underscore the role of glass fibers in enhancing the durability and overall performance of flax fiber composites, making them a promising candidate for applications requiring sustained exposure to aggressive environments.
- 14 October 2024
- Published by Walter de Gruyter GmbH in Journal of Polymer Engineering
- Vol. 44 (10) , 740-751
Microstructure-mechanical property relationships of polymer nanocomposite reinforced with lyophilized montmorillonite/carbon nanotubes hybrid particles
Introducing multi-walled carbon nanotubes (MWCNT) and montmorillonite (MMT) simultaneously into a polymer can significantly enhance its properties. Meanwhile, choosing the best technique to homogeneously disperse these nanohybrid particles in polymers, without agglomerates, is still a challenge. In this study, a hybrid MMT/MWCNT, prepared by lyophilization process, is introduced in polylactide (PLA). Morphology of the resulting nanocomposites displays synergistic relationships of the MMT/MWCNT, facilitating dispersion in PLA. The analysis of transmission electron microscopy (TEM) specific particle densities of PLA0.5hyb, PLA1.0hyb, and PLA2.0hyb shows values of 77, 64, and 35 µm⁻2, respectively. This suggests that MMT platelets are significantly more exfoliated in PLA0.5hyb compared to the other nanocomposites. It also indicates that filler aggregation increases as the MMT/MWCNT concentration increases. Compared to neat PLA, elastic modulus of nanocomposites increased by up to 46 %, demonstrating the reinforcing effect of MMT/MWCNT hybrid nanofillers. The nanocomposites exhibit viscosity, plasticity and damage phenomena, which are significantly decreased because of the MMT/MWCNT incorporation, compared to neat PLA. Furthermore, the viscoelastic properties, analyzed by dynamic thermal-mechanical analysis, record about 27 % increase in the storage modulus of the nanocomposites compared to PLA, indicating the effectiveness of the hybrid MMT/MWCNT in increasing the resistance of PLA/MMT/MWCNT nanocomposite against thermomechanical aggression.
- 14 October 2024
- Published by Walter de Gruyter GmbH in Journal of Polymer Engineering
- Vol. 44 (10) , 740-751
Microstructure-mechanical property relationships of polymer nanocomposite reinforced with lyophilized montmorillonite/carbon nanotubes hybrid particles
Introducing multi-walled carbon nanotubes (MWCNT) and montmorillonite (MMT) simultaneously into a polymer can significantly enhance its properties. Meanwhile, choosing the best technique to homogeneously disperse these nanohybrid particles in polymers, without agglomerates, is still a challenge. In this study, a hybrid MMT/MWCNT, prepared by lyophilization process, is introduced in polylactide (PLA). Morphology of the resulting nanocomposites displays synergistic relationships of the MMT/MWCNT, facilitating dispersion in PLA. The analysis of transmission electron microscopy (TEM) specific particle densities of PLA0.5hyb, PLA1.0hyb, and PLA2.0hyb shows values of 77, 64, and 35 µm⁻2, respectively. This suggests that MMT platelets are significantly more exfoliated in PLA0.5hyb compared to the other nanocomposites. It also indicates that filler aggregation increases as the MMT/MWCNT concentration increases. Compared to neat PLA, elastic modulus of nanocomposites increased by up to 46 %, demonstrating the reinforcing effect of MMT/MWCNT hybrid nanofillers. The nanocomposites exhibit viscosity, plasticity and damage phenomena, which are significantly decreased because of the MMT/MWCNT incorporation, compared to neat PLA. Furthermore, the viscoelastic properties, analyzed by dynamic thermal-mechanical analysis, record about 27 % increase in the storage modulus of the nanocomposites compared to PLA, indicating the effectiveness of the hybrid MMT/MWCNT in increasing the resistance of PLA/MMT/MWCNT nanocomposite against thermomechanical aggression.
- Open Access
Interphase in the mechanical behaviour prediction models for nanocomposites
Polymers are increasingly used in the transport sector due to their many advantages; lightness, corrosion resistance, ease to process... However, most of them have limited mechanical properties. To improve these latter, one of the solutions is the addition of nano-reinforcements, this type of material is called nanocomposite. The particularity of these nanocomposites comes from the influence of the interphase, which is an interaction zone between the nanofillers and the matrix. It is therefore imperative to take it into account in the mechanical prediction models.Several analytical schemes are available to study nanocomposites. Some models use a serial or parallel representation of the phases (rule of mixture, Ji model, ...), while others rely on the mean field homogenization approach (Eshelby, Self-consistent, Mori-Tanaka, Double Inclusion, ...).However, directly observing the interphase and its properties experimentally is complex due to its size. Consequently, it is laborious to check the consistency of its consideration in analytical schemes. To compare these schemes, some limit cases of the interphase are studied. A numerical model is also used as a reference for two nanocomposites with distinct interphases.
Open AccessInterphase in the mechanical behaviour prediction models for nanocomposites
Polymers are increasingly used in the transport sector due to their many advantages; lightness, corrosion resistance, ease to process... However, most of them have limited mechanical properties. To improve these latter, one of the solutions is the addition of nano-reinforcements, this type of material is called nanocomposite. The particularity of these nanocomposites comes from the influence of the interphase, which is an interaction zone between the nanofillers and the matrix. It is therefore imperative to take it into account in the mechanical prediction models.Several analytical schemes are available to study nanocomposites. Some models use a serial or parallel representation of the phases (rule of mixture, Ji model, ...), while others rely on the mean field homogenization approach (Eshelby, Self-consistent, Mori-Tanaka, Double Inclusion, ...).However, directly observing the interphase and its properties experimentally is complex due to its size. Consequently, it is laborious to check the consistency of its consideration in analytical schemes. To compare these schemes, some limit cases of the interphase are studied. A numerical model is also used as a reference for two nanocomposites with distinct interphases.
- 1 January 2021
- Published by Elsevier in Materials Today: Proceedings
- Vol. 47, 3247-3250
Properties of polylactide reinforced with montmorillonite/multiwalled carbon nanotube hybrid
- 1 January 2021
- Published by Elsevier in Materials Today: Proceedings
- Vol. 47, 3247-3250
Properties of polylactide reinforced with montmorillonite/multiwalled carbon nanotube hybrid
- Open Access
Calorimetric and Dielectric Study of Renewable Poly(hexylene 2,5-furan-dicarboxylate)-Based Nanocomposites In Situ Filled with Small Amounts of Graphene Platelets and Silica Nanoparticles
Poly(hexylene 2,5 furan-dicarboxylate) (PHF) is a relatively new biobased polyester prepared from renewable resources, which is targeted for use in food packaging applications, owing to its great mechanical and gas barrier performance. Since both properties are strongly connected to crystallinity, the latter is enhanced here by the in situ introduction in PHF of graphene nanoplatelets and fumed silica nanoparticles, as well as mixtures of both, at low amounts. For this investigation, we employed Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and dielectric spectroscopy (BDS). The fillers were found to improve crystallization in both the rate (increasing Tc) and fraction (CF), which was rationalized via the concept of fillers acting as crystallization agents. This action was found stronger in the case of graphene as compared to silica. BDS allowed the detection of local and segmental dynamics, in particular in PHF for the first time. The glass transition dynamics in both BDS (α relaxation) and DSC (Tg) are mainly dominated by the relatively high CF, whereas in the PHF filled uniquely with silica strong spatial confinement effects due to crystals were revealed. Finally, all samples demonstrated the segmental-like dynamics above Tg, which screens the global chain dynamics (normal mode).
Open AccessCalorimetric and Dielectric Study of Renewable Poly(hexylene 2,5-furan-dicarboxylate)-Based Nanocomposites In Situ Filled with Small Amounts of Graphene Platelets and Silica Nanoparticles
Poly(hexylene 2,5 furan-dicarboxylate) (PHF) is a relatively new biobased polyester prepared from renewable resources, which is targeted for use in food packaging applications, owing to its great mechanical and gas barrier performance. Since both properties are strongly connected to crystallinity, the latter is enhanced here by the in situ introduction in PHF of graphene nanoplatelets and fumed silica nanoparticles, as well as mixtures of both, at low amounts. For this investigation, we employed Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and dielectric spectroscopy (BDS). The fillers were found to improve crystallization in both the rate (increasing Tc) and fraction (CF), which was rationalized via the concept of fillers acting as crystallization agents. This action was found stronger in the case of graphene as compared to silica. BDS allowed the detection of local and segmental dynamics, in particular in PHF for the first time. The glass transition dynamics in both BDS (α relaxation) and DSC (Tg) are mainly dominated by the relatively high CF, whereas in the PHF filled uniquely with silica strong spatial confinement effects due to crystals were revealed. Finally, all samples demonstrated the segmental-like dynamics above Tg, which screens the global chain dynamics (normal mode).
- 1 February 2020
- Published by Elsevier in Applied Clay Science
- Vol. 185
Clays and carbon nanotubes as hybrid nanofillers in thermoplastic-based nanocomposites – A review
- 1 February 2020
- Published by Elsevier in Applied Clay Science
- Vol. 185
Clays and carbon nanotubes as hybrid nanofillers in thermoplastic-based nanocomposites – A review
- 11 January 2017
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 51 (22) , 3137-3147
Effect of a coupled thermomechanical loading on the residual mechanical strength and on the surface temperature of wound carbon/epoxy composite
Wound composite structures such as hyperbaric hydrogen tanks may experience accidental situations, for example in case of a fire. The FCH-JU project FireComp aims at better characterizing the conditions that need to be achieved in order to avoid a failure of a composite pressure vessel. This research program involves specific experiments to improve the understanding of loss of strength of composite high-pressure vessels in fire conditions. The present study investigates the effect of a coupled thermomechanical loading (cone calorimeter exposure and, simultaneously, mechanical stress) on the residual strength of a composite material. A specific device combining a cone and a four-point bending bench has been designed. The influence of the coupled aggression is addressed by comparing the temperature on the front and the rear sides, the mass loss, and the residual tensile strength of a set of samples subjected to a heat flux only and a set subjected to a heat flux and a four-point bending. The results do not exhibit a clear effect of the mechanical load: the thermomechanical properties of both sets of samples are similar.
- 11 January 2017
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 51 (22) , 3137-3147
Effect of a coupled thermomechanical loading on the residual mechanical strength and on the surface temperature of wound carbon/epoxy composite
Wound composite structures such as hyperbaric hydrogen tanks may experience accidental situations, for example in case of a fire. The FCH-JU project FireComp aims at better characterizing the conditions that need to be achieved in order to avoid a failure of a composite pressure vessel. This research program involves specific experiments to improve the understanding of loss of strength of composite high-pressure vessels in fire conditions. The present study investigates the effect of a coupled thermomechanical loading (cone calorimeter exposure and, simultaneously, mechanical stress) on the residual strength of a composite material. A specific device combining a cone and a four-point bending bench has been designed. The influence of the coupled aggression is addressed by comparing the temperature on the front and the rear sides, the mass loss, and the residual tensile strength of a set of samples subjected to a heat flux only and a set subjected to a heat flux and a four-point bending. The results do not exhibit a clear effect of the mechanical load: the thermomechanical properties of both sets of samples are similar.
- 1 January 2017
- Published by EDP Sciences in Mechanics & Industry
- Vol. 18 (6) , 607
VDT microplane model with anisotropic effectiveness and plasticity
The opening-closing state of the microcracks is a kinematic phenomenon usually modeled using a set of damage effectiveness variables, which results in different elastic responses for the same damage level. In this work, the microplane model with volumetric, deviatoric and tangential decomposition denoted V-D-T is modified. The influence of the confining pressure is taken into account in the damage variables evolution laws. For a better understanding of the mechanisms introduced into the model, the damage rosettes are presented for a strain given level. The model is confirmed through comparisons of the simulations with the experimental results of monotonic, and cyclic tensile and compressive testing with different levels of confining pressure.
- 1 January 2017
- Published by EDP Sciences in Mechanics & Industry
- Vol. 18 (6) , 607
VDT microplane model with anisotropic effectiveness and plasticity
The opening-closing state of the microcracks is a kinematic phenomenon usually modeled using a set of damage effectiveness variables, which results in different elastic responses for the same damage level. In this work, the microplane model with volumetric, deviatoric and tangential decomposition denoted V-D-T is modified. The influence of the confining pressure is taken into account in the damage variables evolution laws. For a better understanding of the mechanisms introduced into the model, the damage rosettes are presented for a strain given level. The model is confirmed through comparisons of the simulations with the experimental results of monotonic, and cyclic tensile and compressive testing with different levels of confining pressure.