Francisco Rodrigo Porto Cavalcanti
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Francisco Rodrigo Porto Cavalcanti has a total of 77 co-authors. Here are the top co-authors by number of shared publications:
- Walter Cruz Freitas
Wireless Telecom Research Group (GTEL), Federal University of Cear, Fortaleza, Brazil
5 shared publications - Alexandre Matos Pessoa
Wireless Telecommunications Research Group (GTEL), Department of Teleinformatics Engineering Federal University of Ceará, Pici Campus Fortaleza Brazil
3 shared publications - Carlos Filipe Moreira e Silva
Wireless Telecom Research Group (GTEL), Federal University of Ceará, Fortaleza, Brazil
3 shared publications - Emanuel Bezerra Rodrigues
Universidade Federal do Ceará (UFC)
3 shared publications - F. De S. Chaves
Wireless Telecommunication Research Group - GTEL - UFC, CP 6005, Campus do Pici, Fortaleza, Brazil
3 shared publications - Francisco Rafael Marques Lima
Wireless Telecommunications Research Group (GTEL), Federal University of Cear (UFC), Fortaleza, Ceará, Brazil
3 shared publications
Latest Publications
- 19 March 2025
- Published by Springer Nature
- p. 271-308
Building Trust in Spectrum Sharing: A Decentralized Architecture for Spectrum Databases
- 19 March 2025
- Published by Springer Nature
- p. 271-308
Building Trust in Spectrum Sharing: A Decentralized Architecture for Spectrum Databases
- Open Access
- 11 October 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (14)
Flexible metasurfaces as sub-6 GHz frequency selective surfaces for 5G applications
The deployment of fifth-generation mobile network (5G), beyond 5G and sixth-generation mobile network platforms encounters challenges of blockage, interference, and path loss in radio mobile environments. Metasurfaces provide a promising solution to address these limitations. In this paper, we present a methodology for developing ultrathin flexible metasurface-based frequency selective surfaces (FSSs). Our approach combines thermal evaporation for metallic thin films with a macroscopic metasurface mask (something analogous to screen-printing but using thermal evaporation instead of inks). As a proof of concept, we fabricate a sub-6 GHz metasurface-based FSS using gold deposition on a flexible polyethylene terephthalate substrate. Experimental results are validated through numerical full-wave simulations using COMSOL Multiphysics and equivalent-circuit model simulations. The metasurface operates within the primary frequency band utilized in 5G networks (3–5 GHz), indicating its potential applicability across a wide range of flexible, conformal, and wearable devices. The fabricated FSS can be installed on surfaces of any shape, such as flat or curved windows, as well as on walls or other external surfaces. This methodology offers practical solutions for wireless communications and enhancing signal transmission in diverse environments.
- 11 October 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (14)
Open AccessFlexible metasurfaces as sub-6 GHz frequency selective surfaces for 5G applications
The deployment of fifth-generation mobile network (5G), beyond 5G and sixth-generation mobile network platforms encounters challenges of blockage, interference, and path loss in radio mobile environments. Metasurfaces provide a promising solution to address these limitations. In this paper, we present a methodology for developing ultrathin flexible metasurface-based frequency selective surfaces (FSSs). Our approach combines thermal evaporation for metallic thin films with a macroscopic metasurface mask (something analogous to screen-printing but using thermal evaporation instead of inks). As a proof of concept, we fabricate a sub-6 GHz metasurface-based FSS using gold deposition on a flexible polyethylene terephthalate substrate. Experimental results are validated through numerical full-wave simulations using COMSOL Multiphysics and equivalent-circuit model simulations. The metasurface operates within the primary frequency band utilized in 5G networks (3–5 GHz), indicating its potential applicability across a wide range of flexible, conformal, and wearable devices. The fabricated FSS can be installed on surfaces of any shape, such as flat or curved windows, as well as on walls or other external surfaces. This methodology offers practical solutions for wireless communications and enhancing signal transmission in diverse environments.
- 12 May 2021
- Published by Wiley in Transactions on Emerging Telecommunications Technologies
- Vol. 32 (10) , e4293
Energy‐efficient radio resource allocation for dual‐hop relay‐assisted orthogonal frequency division multiple access systems with quality of service provisioning
Besides the conventional spectral efficiency metric, energy efficiency (EE) has been adopted as one of the new mandatory performance metrics for green future mobile networks. In this sense, in this article we study energy‐efficient radio resource allocation for dual‐hop orthogonal frequency division multiple access relay networks considering multiple relays and users. Resource allocation in our scenario is comprised of relay selection, subcarrier pairing, subcarrier assignment, and transmit power allocation. Particularly, in the context of EE with quality of service constraints, three different problems, namely, power consumption minimization, global EE maximization, and minimum individual EE maximization are addressed. For tackling them, first, we demonstrate a property that exploits the use of the decode and forward protocol employed in the relays and we show how it can be applied to simplify the investigated problems. Although some of these problems are nonconvex due to the fractional objective functions and integer optimization domain, optimal solutions are provided using generalized fractional programming theory to transform the fractional objective functions to the subtractive forms. Then, by employing Dinkelbach or bisection methods, we propose iterative algorithms where a parametric problem is solved in each iteration until reaching convergence. By introducing a penalty function to handle integer variables and applying majorization‐minimization approach, we make the parametric problem convex and we propose suboptimal iterative solutions with reduced computational cost. Regarding obtained simulation results, we discuss the performance of the involved solutions in terms of global EE and fairness with respect to different parameters of the system.
- 12 May 2021
- Published by Wiley in Transactions on Emerging Telecommunications Technologies
- Vol. 32 (10) , e4293
Energy‐efficient radio resource allocation for dual‐hop relay‐assisted orthogonal frequency division multiple access systems with quality of service provisioning
Besides the conventional spectral efficiency metric, energy efficiency (EE) has been adopted as one of the new mandatory performance metrics for green future mobile networks. In this sense, in this article we study energy‐efficient radio resource allocation for dual‐hop orthogonal frequency division multiple access relay networks considering multiple relays and users. Resource allocation in our scenario is comprised of relay selection, subcarrier pairing, subcarrier assignment, and transmit power allocation. Particularly, in the context of EE with quality of service constraints, three different problems, namely, power consumption minimization, global EE maximization, and minimum individual EE maximization are addressed. For tackling them, first, we demonstrate a property that exploits the use of the decode and forward protocol employed in the relays and we show how it can be applied to simplify the investigated problems. Although some of these problems are nonconvex due to the fractional objective functions and integer optimization domain, optimal solutions are provided using generalized fractional programming theory to transform the fractional objective functions to the subtractive forms. Then, by employing Dinkelbach or bisection methods, we propose iterative algorithms where a parametric problem is solved in each iteration until reaching convergence. By introducing a penalty function to handle integer variables and applying majorization‐minimization approach, we make the parametric problem convex and we propose suboptimal iterative solutions with reduced computational cost. Regarding obtained simulation results, we discuss the performance of the involved solutions in terms of global EE and fairness with respect to different parameters of the system.
- 27 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 70 (2) , 1941-1945
A Positive Semidefinite Autocorrelation Function for Modeling 3D Gaussian processes
The generation of spatially consistent random variables (SCRVs) in R2 and R3 described by a predefined autocorrelation function (ACF) is an important feature for channel modeling in fifth-generation (5G) systems. However, most of the existing ACF models only provide strictly non-negative (SNN) correlation and the ones that provide negative correlation are mostly non-positive semi-definite (PSDe). Motivated by this and also by measurements found in the literature, this paper proposes an ACF model that extends the exponential decaying ACF by allowing negative correlations. The model is proved to be PSDe in R2 and R3 and its capability to fit channel measurements in millimeter-wave (mmWave) bands is also analyzed. Furthermore, it is provided an analytical derivation of a sum-of-sinusoids (SoS) method capable of generating a Gaussian process (GP) in R3 characterized by the proposed ACF. The proposed SoS method is compared to a state-of-the-art (SoA) solution and presents gains up to 13 dB and 1.5 dB in terms of spatial-mean-square error (SMSE) and mean square error (MSE), respectively, while demanding lower computational complexity.
- 27 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 70 (2) , 1941-1945
A Positive Semidefinite Autocorrelation Function for Modeling 3D Gaussian processes
The generation of spatially consistent random variables (SCRVs) in R2 and R3 described by a predefined autocorrelation function (ACF) is an important feature for channel modeling in fifth-generation (5G) systems. However, most of the existing ACF models only provide strictly non-negative (SNN) correlation and the ones that provide negative correlation are mostly non-positive semi-definite (PSDe). Motivated by this and also by measurements found in the literature, this paper proposes an ACF model that extends the exponential decaying ACF by allowing negative correlations. The model is proved to be PSDe in R2 and R3 and its capability to fit channel measurements in millimeter-wave (mmWave) bands is also analyzed. Furthermore, it is provided an analytical derivation of a sum-of-sinusoids (SoS) method capable of generating a Gaussian process (GP) in R3 characterized by the proposed ACF. The proposed SoS method is compared to a state-of-the-art (SoA) solution and presents gains up to 13 dB and 1.5 dB in terms of spatial-mean-square error (SMSE) and mean square error (MSE), respectively, while demanding lower computational complexity.
- 6 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 9 (11) , 1803-1807
A Spatially Consistent Gaussian Process for Dual Mobility in the 3D Space
Spatially consistent random variables (SCRVs) have been used in many channel models to ensure a smooth time evolution and correlation of the channel coefficients among closely located terminals. However, most of the existing methods which generate SCRVs are restricted to mobility in the two-dimensional (2D) space and those that cover the three-dimensional (3D) space are still limited in terms of accuracy and/or complexity of processing and memory. This paper proposes a sum-of-sinusoids (SoS) method to generate a Gaussian process (GP) described by two different spatial autocorrelation functions (ACFs) considering single and dual mobility in the 3D space. The method was derived analytically for each of the considered ACFs and extends existing methods from the 2D to 3D space. Comparisons with existing baseline solution is carried out showing that the proposed method presents gains in terms of average squared error (ASE) up to 20 dB. Furthemore, the proposed method using only 100 coefficients presented an ASE around 10 dB smaller when compared with the baseline solution using 1000 coefficients.
- 6 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 9 (11) , 1803-1807
A Spatially Consistent Gaussian Process for Dual Mobility in the 3D Space
Spatially consistent random variables (SCRVs) have been used in many channel models to ensure a smooth time evolution and correlation of the channel coefficients among closely located terminals. However, most of the existing methods which generate SCRVs are restricted to mobility in the two-dimensional (2D) space and those that cover the three-dimensional (3D) space are still limited in terms of accuracy and/or complexity of processing and memory. This paper proposes a sum-of-sinusoids (SoS) method to generate a Gaussian process (GP) described by two different spatial autocorrelation functions (ACFs) considering single and dual mobility in the 3D space. The method was derived analytically for each of the considered ACFs and extends existing methods from the 2D to 3D space. Comparisons with existing baseline solution is carried out showing that the proposed method presents gains in terms of average squared error (ASE) up to 20 dB. Furthemore, the proposed method using only 100 coefficients presented an ASE around 10 dB smaller when compared with the baseline solution using 1000 coefficients.
- 15 July 2019
- Published by Wiley in Transactions on Emerging Telecommunications Technologies
- Vol. 30 (9) , e3687
Supervised learning and graph signal processing strategies for beam tracking in highly directional mobile communications
The use of efficient beam tracking mechanisms becomes necessary in highly directional communication of the fifth‐generation systems. In this context, this paper analyzes the tracking problem and proposes a framework that exploits the samples in the user equipment (UE) dataset (historical UE dataset) to efficiently estimate and predict the channel state at the base station. The framework is composed of two steps. First, a supervised learning algorithm, namely, K‐nearest neighbors (K‐NN), is evaluated as a mean of (i) finding the most similar historical samples to some beam measurements reported by the UE and (ii) predicting the corresponding channel state. As a second step, a sampling and reconstruction strategy based on graph signal processing (GSP) called K‐nearest neighbors with reconstruction (K‐NN‐R) is introduced in order to reduce the beam search space during the beam measurement stage, which allows a more efficient usage of the feedback channel. Simulation results illustrate the performance of the proposal in terms of normalized mean square error in comparison with three traditional/baseline prediction techniques. The K‐NN technique provides a better performance than the baseline approaches for any length of the observed temporal window and with full beam sweep. Meanwhile, the K‐NN‐R framework outperforms the baseline approaches with only half of the beam pairs and throughout a significantly low length of observed temporal window.
- 15 July 2019
- Published by Wiley in Transactions on Emerging Telecommunications Technologies
- Vol. 30 (9) , e3687
Supervised learning and graph signal processing strategies for beam tracking in highly directional mobile communications
The use of efficient beam tracking mechanisms becomes necessary in highly directional communication of the fifth‐generation systems. In this context, this paper analyzes the tracking problem and proposes a framework that exploits the samples in the user equipment (UE) dataset (historical UE dataset) to efficiently estimate and predict the channel state at the base station. The framework is composed of two steps. First, a supervised learning algorithm, namely, K‐nearest neighbors (K‐NN), is evaluated as a mean of (i) finding the most similar historical samples to some beam measurements reported by the UE and (ii) predicting the corresponding channel state. As a second step, a sampling and reconstruction strategy based on graph signal processing (GSP) called K‐nearest neighbors with reconstruction (K‐NN‐R) is introduced in order to reduce the beam search space during the beam measurement stage, which allows a more efficient usage of the feedback channel. Simulation results illustrate the performance of the proposal in terms of normalized mean square error in comparison with three traditional/baseline prediction techniques. The K‐NN technique provides a better performance than the baseline approaches for any length of the observed temporal window and with full beam sweep. Meanwhile, the K‐NN‐R framework outperforms the baseline approaches with only half of the beam pairs and throughout a significantly low length of observed temporal window.
- 2 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 23 (9) , 1598-1602
5G Measurement Adaptation Based on Channel Hardening Occurrence
In 5G, reference signals may be transmitted on beams. Thus, the amount of UE measurements might increase with the number of beams, increasing battery consumption. With narrow beams, under specific conditions, channel variations may decrease, the so-called Channel Hardening (CH) effect. So, the UE might obtain highly correlated measurements, which suggests that the measurements could be reduced without major drawbacks. This letter proposes a method for CH detection and measurement adaptation. Moreover, an overview of CH and 5G reference signals, i.e., SSB and CSI-RS, is presented. Simulations show that our proposal can reduce measurements in up to 8x.
- 2 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 23 (9) , 1598-1602
5G Measurement Adaptation Based on Channel Hardening Occurrence
In 5G, reference signals may be transmitted on beams. Thus, the amount of UE measurements might increase with the number of beams, increasing battery consumption. With narrow beams, under specific conditions, channel variations may decrease, the so-called Channel Hardening (CH) effect. So, the UE might obtain highly correlated measurements, which suggests that the measurements could be reduced without major drawbacks. This letter proposes a method for CH detection and measurement adaptation. Moreover, an overview of CH and 5G reference signals, i.e., SSB and CSI-RS, is presented. Simulations show that our proposal can reduce measurements in up to 8x.
- 15 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 67 (11) , 11243-11247
A Unifying Design of Hybrid Beamforming Architectures Employing Phase Shifters or Switches
Hybrid beamforming (BF) architectures employing phase-shifters or switches reduce the number of required radio frequency chains and the power consumption of base stations that employ a large number of antennas. Due to the inherent trade-off between the number of radio frequency chains, the complexity of the employed analog and digital BF algorithms and the achieved spectral and energy efficiency, designing hybrid BF architectures is a complex task. To deal with this complexity, we propose a unifying design that is applicable to architectures employing either phase-shifters or switches. In our design, the analog part of the hybrid BF architecture maximizes the capacity of the equivalent channel, while the digital part is updated using the well-known block diagonalization approach. We then employ the proposed joint analog-digital beamforming algorithm on four recently proposed hybrid architectures and compare their performance in terms of spectral and energy efficiency, and find that the proposed analog-digital BF algorithm outperforms previously proposed schemes. We also find that phase shifter based architectures achieve high spectral efficiency, whereas switching-based architectures can boost energy efficiency with increasing number of base station antennas.
- 15 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 67 (11) , 11243-11247
A Unifying Design of Hybrid Beamforming Architectures Employing Phase Shifters or Switches
Hybrid beamforming (BF) architectures employing phase-shifters or switches reduce the number of required radio frequency chains and the power consumption of base stations that employ a large number of antennas. Due to the inherent trade-off between the number of radio frequency chains, the complexity of the employed analog and digital BF algorithms and the achieved spectral and energy efficiency, designing hybrid BF architectures is a complex task. To deal with this complexity, we propose a unifying design that is applicable to architectures employing either phase-shifters or switches. In our design, the analog part of the hybrid BF architecture maximizes the capacity of the equivalent channel, while the digital part is updated using the well-known block diagonalization approach. We then employ the proposed joint analog-digital beamforming algorithm on four recently proposed hybrid architectures and compare their performance in terms of spectral and energy efficiency, and find that the proposed analog-digital BF algorithm outperforms previously proposed schemes. We also find that phase shifter based architectures achieve high spectral efficiency, whereas switching-based architectures can boost energy efficiency with increasing number of base station antennas.
- 1 January 2018
- Published by Elsevier
Contributors