Thorsten Leusmann
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Thorsten Leusmann has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Dirk Lowke
Technical University of Munich, Department of Materials Engineering
6 shared publications - Gauravdatt Basutkar
Institute of Building Materials, Concrete Construction and Fire Safety (iBMB), Technische Universität Braunschweig, Beethovenstraße 52, 38106 Braunschweig, Germany
2 shared publications - Sven Ledderboge
Institut für Baustoffe, Massivbau und Brandschutz (iBMB), Technische Universität Braunschweig
2 shared publications - Ulf Husemann
Institut für Baustoffe, Massivbau und Brandschutz (iBMB), Technische Universität Braunschweig
2 shared publications A. Potnis
1 shared publication- Alexander Gunkler
Technical University of Munich
1 shared publication
Latest Publications
- Open Access
- 23 August 2026
- Published by Springer Nature
- p. 51-68
Multiscale Investigation of Fatigue Crack Growth in High-Performance Concrete Based on Computer Tomography and Phase-Field Fracture Modelling
High-performance concrete (HPC) is increasingly adopted in the construction of concrete structures for bridges, towers, offshore rigs, high-rise buildings and wind turbines. HPC enables slender cross-sections, lighter structural components and longer spans for structures. However, due to their inherently reduced self-weight, these structures are often subjected to cyclic loads throughout their lifetime. Despite being an advanced material, the potential of using HPC under fatigue loading cannot be fully exploited due to conservative design standards. The fracture mechanical behaviour of HPC, containing basalt aggregate (AG) and coarse mortar (CM), was investigated under static and cyclic tensile loading. The matrix material CM was developed as a concrete equivalent mortar using the excess paste theory. The test results show clear differences between the HPC and its components, basalt AG and CM, in terms of mechanical properties and fracture mechanical behaviour under static and cyclic loading. A novel and efficient hybrid formulation for phase-field modelling in brittle fracture is introduced. Both helping to understand the influence of the internal mesostructure on the fracture mechanical properties of the HPC on the macroscale.
- 23 August 2026
- Published by Springer Nature
- p. 51-68
Open AccessMultiscale Investigation of Fatigue Crack Growth in High-Performance Concrete Based on Computer Tomography and Phase-Field Fracture Modelling
High-performance concrete (HPC) is increasingly adopted in the construction of concrete structures for bridges, towers, offshore rigs, high-rise buildings and wind turbines. HPC enables slender cross-sections, lighter structural components and longer spans for structures. However, due to their inherently reduced self-weight, these structures are often subjected to cyclic loads throughout their lifetime. Despite being an advanced material, the potential of using HPC under fatigue loading cannot be fully exploited due to conservative design standards. The fracture mechanical behaviour of HPC, containing basalt aggregate (AG) and coarse mortar (CM), was investigated under static and cyclic tensile loading. The matrix material CM was developed as a concrete equivalent mortar using the excess paste theory. The test results show clear differences between the HPC and its components, basalt AG and CM, in terms of mechanical properties and fracture mechanical behaviour under static and cyclic loading. A novel and efficient hybrid formulation for phase-field modelling in brittle fracture is introduced. Both helping to understand the influence of the internal mesostructure on the fracture mechanical properties of the HPC on the macroscale.
- Open Access
- 1 August 2026
- Published by NDT.net GmbH & Co. KG in e-Journal of Nondestructive Testing
- Vol. 31 (8)
Adaptive Service Life Prediction of Reinforced Concrete Structures Using Embedded Corrosion Wire Sensors
Adaptive service life prediction of reinforced concrete structures requires continuous, real-time assessment of the chloride-induced depassivation phase. Within this study, an established probabilistic service life model can be combined with embedded corrosion wire sensor data to enable adaptive, data-driven lifetime prediction under real exposure conditions. An integrated corrosion monitoring system with embedded filament wire sensors was employed in the instrumented prestressed concrete research bridge Concerto. These wire sensors enable direct, real-time detection of the depassivation front by measuring the abrupt increase in electrical resistance upon wire fracture. The resulting depassivation times are interpreted and incorporated as input parameters in an established probabilistic lifetime model. By updating model parameters based on wire sensor data, uncertainties are reduced and predictions are adapted to the actual structural condition. Evaluation of the long-term measurements from the Concerto research bridge demonstrates its applicability under real exposure conditions and illustrates how sensor-derived depassivation data can be integrated into established probabilistic lifetime models as a basis for data-driven maintenance planning and reliable estimation of remaining service life. Adaptive service life prediction of reinforced concrete structures requires continuous, real-time assessment of the chloride-induced depassivation phase. Within this study, an established probabilistic service life model can be combined with embedded corrosion wire sensor data to enable adaptive, data-driven lifetime prediction under real exposure conditions. An integrated corrosion monitoring system with embedded filament wire sensors was employed in the instrumented prestressed concrete research bridge Concerto. These wire sensors enable direct, real-time detection of the depassivation front by measuring the abrupt increase in electrical resistance upon wire fracture. The resulting depassivation times are interpreted and incorporated as input parameters in an established probabilistic lifetime model. By updating model parameters based on wire sensor data, uncertainties are reduced and predictions are adapted to the actual structural condition. Evaluation of the long-term measurements from the Concerto research bridge demonstrates its applicability under real exposure conditions and illustrates how sensor-derived depassivation data can be integrated into established probabilistic lifetime models as a basis for data-driven maintenance planning and reliable estimation of remaining service life.
- 1 August 2026
- Published by NDT.net GmbH & Co. KG in e-Journal of Nondestructive Testing
- Vol. 31 (8)
Open AccessAdaptive Service Life Prediction of Reinforced Concrete Structures Using Embedded Corrosion Wire Sensors
Adaptive service life prediction of reinforced concrete structures requires continuous, real-time assessment of the chloride-induced depassivation phase. Within this study, an established probabilistic service life model can be combined with embedded corrosion wire sensor data to enable adaptive, data-driven lifetime prediction under real exposure conditions. An integrated corrosion monitoring system with embedded filament wire sensors was employed in the instrumented prestressed concrete research bridge Concerto. These wire sensors enable direct, real-time detection of the depassivation front by measuring the abrupt increase in electrical resistance upon wire fracture. The resulting depassivation times are interpreted and incorporated as input parameters in an established probabilistic lifetime model. By updating model parameters based on wire sensor data, uncertainties are reduced and predictions are adapted to the actual structural condition. Evaluation of the long-term measurements from the Concerto research bridge demonstrates its applicability under real exposure conditions and illustrates how sensor-derived depassivation data can be integrated into established probabilistic lifetime models as a basis for data-driven maintenance planning and reliable estimation of remaining service life. Adaptive service life prediction of reinforced concrete structures requires continuous, real-time assessment of the chloride-induced depassivation phase. Within this study, an established probabilistic service life model can be combined with embedded corrosion wire sensor data to enable adaptive, data-driven lifetime prediction under real exposure conditions. An integrated corrosion monitoring system with embedded filament wire sensors was employed in the instrumented prestressed concrete research bridge Concerto. These wire sensors enable direct, real-time detection of the depassivation front by measuring the abrupt increase in electrical resistance upon wire fracture. The resulting depassivation times are interpreted and incorporated as input parameters in an established probabilistic lifetime model. By updating model parameters based on wire sensor data, uncertainties are reduced and predictions are adapted to the actual structural condition. Evaluation of the long-term measurements from the Concerto research bridge demonstrates its applicability under real exposure conditions and illustrates how sensor-derived depassivation data can be integrated into established probabilistic lifetime models as a basis for data-driven maintenance planning and reliable estimation of remaining service life.
- Open Access
- 9 July 2026
- Published by Springer Nature
- p. 13-24
Performance of Low-Carbon Concretes with High Amounts of Ground Limestone by Aluminate-Boosting of OPC
As part of the global effort to tackle climate change, Low-Carbon Concretes (LCC) are becoming increasingly important in the construction industry. They differ from standard concretes in terms of their significantly reduced carbon footprint. This can be achieved directly by (I) using CO 2 -negative SCM and/or (II) using blended binders with reduced cement clinker content (e.g. substitution by SCM). Disadvantages associated with these strategies, such as reduced workability or durability, can be compensated through optimizing the particle size distribution or reducing the water-to-clinker ratio while increasing the superplasticizer dosage. Regarding limitations of the practical feasibility of these approaches and/or the availability of SCM, the substitution of cement clinker by high amounts of ground limestone in LCC seems to be particularly suitable for reducing CO 2 -emissions. However, high amounts of ground limestone in LCC result in a significant reduction in mechanical properties and durability due to the lower C-S-H formation, resulting in a less dense hardened structure as well as less alkaline environment in the pore solution. A novel approach for producing LCC involves the use of Hydration Control Additives (HCA). These additives modify the hydration kinetics of OPC and enhance its strength-forming potential by converting the aluminate phases into additional solids, i.e. ettringite (‘aluminate-boost’). Therefore, the use of HCA is a promising approach to realize LCC with low-clinker binders containing high amounts of limestone powder. This study investigates the application of HCA for LCC with up to 50 vol.% of ground limestone in the binder. Two reference mixes were included in the investigations: A standard concrete with 100% OPC and an identical LCC without HCA. Experimental results show that the anticipated effects of dilution due to the substantial reduction of 50 vol.% cement clinker in LCC can be fully compensated by the use of HCA: this includes mechanical properties like compressive strength as well as the durability like the freeze-thaw resistance.
- 9 July 2026
- Published by Springer Nature
- p. 13-24
Open AccessPerformance of Low-Carbon Concretes with High Amounts of Ground Limestone by Aluminate-Boosting of OPC
As part of the global effort to tackle climate change, Low-Carbon Concretes (LCC) are becoming increasingly important in the construction industry. They differ from standard concretes in terms of their significantly reduced carbon footprint. This can be achieved directly by (I) using CO 2 -negative SCM and/or (II) using blended binders with reduced cement clinker content (e.g. substitution by SCM). Disadvantages associated with these strategies, such as reduced workability or durability, can be compensated through optimizing the particle size distribution or reducing the water-to-clinker ratio while increasing the superplasticizer dosage. Regarding limitations of the practical feasibility of these approaches and/or the availability of SCM, the substitution of cement clinker by high amounts of ground limestone in LCC seems to be particularly suitable for reducing CO 2 -emissions. However, high amounts of ground limestone in LCC result in a significant reduction in mechanical properties and durability due to the lower C-S-H formation, resulting in a less dense hardened structure as well as less alkaline environment in the pore solution. A novel approach for producing LCC involves the use of Hydration Control Additives (HCA). These additives modify the hydration kinetics of OPC and enhance its strength-forming potential by converting the aluminate phases into additional solids, i.e. ettringite (‘aluminate-boost’). Therefore, the use of HCA is a promising approach to realize LCC with low-clinker binders containing high amounts of limestone powder. This study investigates the application of HCA for LCC with up to 50 vol.% of ground limestone in the binder. Two reference mixes were included in the investigations: A standard concrete with 100% OPC and an identical LCC without HCA. Experimental results show that the anticipated effects of dilution due to the substantial reduction of 50 vol.% cement clinker in LCC can be fully compensated by the use of HCA: this includes mechanical properties like compressive strength as well as the durability like the freeze-thaw resistance.
- Open Access
Model-based reinforcement corrosion prediction: Continuous calibration with Bayesian optimization and corrosion wire sensor data
Chloride-induced corrosion significantly contributes to the degradation of reinforced concrete structures, making accurate predictions of chloride migration and its effects on material durability critical. This paper explores two modeling approaches to estimate the effective diffusion coefficient for chloride transport. The first approach follows Gehlen's interpretable diffusion model, which is based on established physical principles and incorporates time and temperature dependencies in predicting chloride migration. The second approach is a neural network-based method, where the neural network approximates the effective diffusion coefficient. In a subsequent step, the calibrated models are used to predict the penetration depth of the critical chloride content, taking into account the uncertainty in the critical chloride content. The models are calibrated using experimental data measured by a wire sensor installed in a concrete test bridge. The calibration results are compared to effective diffusion coefficients derived from drilling dust samples. A comparison of both approaches reveals the advantages of the physics-based model in terms of transparency and interpretability, while the neural network model demonstrates flexibility and adaptability in data-driven predictions. This study emphasizes the importance of combining traditional and machine learning-based methods to improve the accuracy of chloride migration predictions in reinforced concrete.
Open AccessModel-based reinforcement corrosion prediction: Continuous calibration with Bayesian optimization and corrosion wire sensor data
Chloride-induced corrosion significantly contributes to the degradation of reinforced concrete structures, making accurate predictions of chloride migration and its effects on material durability critical. This paper explores two modeling approaches to estimate the effective diffusion coefficient for chloride transport. The first approach follows Gehlen's interpretable diffusion model, which is based on established physical principles and incorporates time and temperature dependencies in predicting chloride migration. The second approach is a neural network-based method, where the neural network approximates the effective diffusion coefficient. In a subsequent step, the calibrated models are used to predict the penetration depth of the critical chloride content, taking into account the uncertainty in the critical chloride content. The models are calibrated using experimental data measured by a wire sensor installed in a concrete test bridge. The calibration results are compared to effective diffusion coefficients derived from drilling dust samples. A comparison of both approaches reveals the advantages of the physics-based model in terms of transparency and interpretability, while the neural network model demonstrates flexibility and adaptability in data-driven predictions. This study emphasizes the importance of combining traditional and machine learning-based methods to improve the accuracy of chloride migration predictions in reinforced concrete.
- 1 September 2024
- Published by Springer Nature
- p. 415-422
Digital Fabrication with Local Earthen Materials: The Relevance of Process Robustness
- 1 September 2024
- Published by Springer Nature
- p. 415-422
Digital Fabrication with Local Earthen Materials: The Relevance of Process Robustness
- Open Access
- 3 April 2024
- Published by Springer Nature
- p. 113-140
Trittsicherheit auf Zukunftspfaden? Ungewissheitsbewältigung bei der Entsorgung hochradioaktiver Abfälle
Zusammenfassung: Die Wege für eine sichere Entsorgung hochradioaktiver Abfälle sind vielfältig und bleiben eine zentrale politisch-gesellschaftliche Herausforderung. Umweltverträglichkeit, Gesundheitsschutz und sozialer Frieden sind nur einige Aspekte, denen eine zukunftsgerichtete Endlagerung gerecht werden muss. Vor diesem Hintergrund ist es eine zentrale Aufgabe, zieladäquate Zukunftspfade der nuklearen Entsorgung hochradioaktiver Abfälle zu identifizieren, zu analysieren und zu bewerten – dies steht im Mittelpunkt dieses Beitrags. Ziel ist zum einen eine vergleichende Betrachtung der identifizierten Pfade hinsichtlich ihrer Priorisierung und Charakteristika. Zum anderen werden aus den Pfaden übergeordnete Strategien zum Umgang mit Ungewissheiten abgeleitet. Insgesamt wurden sieben Zukunftspfade identifiziert und hinsichtlich ihrer Plausibilität und Umsetzungswahrscheinlichkeit eingeordnet. Die einzelnen Pfade werden im Beitrag zunächst dargestellt mit einem besonderen Augenmerk auf drei Pfaden, die als sehr wahrscheinlich eingestuft wurden. Darauf folgt eine vergleichende Pfadbetrachtung aus dem Blickwinkel von Gewissheiten und Ungewissheiten als Kernthema des Beitrags. Daraus werden drei übergreifende Strategien der Ungewissheitsbewältigung bei Entsorgungspfaden hochradioaktiver Abfälle herausgearbeitet.
- 3 April 2024
- Published by Springer Nature
- p. 113-140
Open AccessTrittsicherheit auf Zukunftspfaden? Ungewissheitsbewältigung bei der Entsorgung hochradioaktiver Abfälle
Zusammenfassung: Die Wege für eine sichere Entsorgung hochradioaktiver Abfälle sind vielfältig und bleiben eine zentrale politisch-gesellschaftliche Herausforderung. Umweltverträglichkeit, Gesundheitsschutz und sozialer Frieden sind nur einige Aspekte, denen eine zukunftsgerichtete Endlagerung gerecht werden muss. Vor diesem Hintergrund ist es eine zentrale Aufgabe, zieladäquate Zukunftspfade der nuklearen Entsorgung hochradioaktiver Abfälle zu identifizieren, zu analysieren und zu bewerten – dies steht im Mittelpunkt dieses Beitrags. Ziel ist zum einen eine vergleichende Betrachtung der identifizierten Pfade hinsichtlich ihrer Priorisierung und Charakteristika. Zum anderen werden aus den Pfaden übergeordnete Strategien zum Umgang mit Ungewissheiten abgeleitet. Insgesamt wurden sieben Zukunftspfade identifiziert und hinsichtlich ihrer Plausibilität und Umsetzungswahrscheinlichkeit eingeordnet. Die einzelnen Pfade werden im Beitrag zunächst dargestellt mit einem besonderen Augenmerk auf drei Pfaden, die als sehr wahrscheinlich eingestuft wurden. Darauf folgt eine vergleichende Pfadbetrachtung aus dem Blickwinkel von Gewissheiten und Ungewissheiten als Kernthema des Beitrags. Daraus werden drei übergreifende Strategien der Ungewissheitsbewältigung bei Entsorgungspfaden hochradioaktiver Abfälle herausgearbeitet.
- Open Access
- 21 March 2024
- Published by MDPI AG in Construction Materials
- Vol. 4 (1) , 292-314
Emphasis of Cyclic Loading on the Fracture Mechanism and Residual Fracture Toughness of High-Performance Concrete Considering the Morphological Properties of Aggregate
This research investigates the fatigue behaviour and fracture mechanics of high-performance concrete (HPC), including various compositions such as HPC with basalt aggregates (HPC-B), HPC with gravel (HPC-G), and high-strength coarse mortar (CM) under static and cyclic tensile loading within the special priority program SPP 2020. The study aims to integrate fracture mechanics into structural analysis to enhance design guidelines for slender cross-sections and safety-related high-performance structural components. The experimental investigations reveal HPC-B’s remarkable superiority, displaying its higher compressive strength, modulus of elasticity, and tensile strength compared to HPC-G and CM. A modified disk-shaped compact tension (MDCT) based on ASTM standards, aided by digital image correlation (DIC) unveils fracture behaviour, emphasizing fracture energy as a crucial parameter. HPC-B exhibits improved crack resistance and notch sensitivity reduction attributed to crushed basalt aggregates and an enhanced interfacial transition zone (ITZ). The research scrutinizes factors like material characterization, aggregate morphology, stress levels, and the displacement rate on crack formation. High-cycle fatigue tests show HPC-B’s superior performance, and the post-fatigue analysis reveals enhanced residual fracture toughness attributed to nano-level structural changes, stress redistribution and aggregate-matrix interaction. A 3D image analysis via Computed Tomography (CT) scans captures mesostructural crack propagation and provide quantitative insights. This research marks a significant shift from conventional aggregate-focused approaches and introduces a novel approach by integrating excess paste theory and mesoscale analysis, highlighting the critical role of aggregate choice in material characterization and mesoscale design in enhancing the structural efficiency of HPC. Furthermore, the study advances the understanding of HPC fatigue behaviour, emphasizing the interplay of aggregate types and morphologies and their dynamic response to cyclic loading, offering valuable insights for optimizing design guidelines and fostering innovation in structural engineering.
- 21 March 2024
- Published by MDPI AG in Construction Materials
- Vol. 4 (1) , 292-314
Open AccessEmphasis of Cyclic Loading on the Fracture Mechanism and Residual Fracture Toughness of High-Performance Concrete Considering the Morphological Properties of Aggregate
This research investigates the fatigue behaviour and fracture mechanics of high-performance concrete (HPC), including various compositions such as HPC with basalt aggregates (HPC-B), HPC with gravel (HPC-G), and high-strength coarse mortar (CM) under static and cyclic tensile loading within the special priority program SPP 2020. The study aims to integrate fracture mechanics into structural analysis to enhance design guidelines for slender cross-sections and safety-related high-performance structural components. The experimental investigations reveal HPC-B’s remarkable superiority, displaying its higher compressive strength, modulus of elasticity, and tensile strength compared to HPC-G and CM. A modified disk-shaped compact tension (MDCT) based on ASTM standards, aided by digital image correlation (DIC) unveils fracture behaviour, emphasizing fracture energy as a crucial parameter. HPC-B exhibits improved crack resistance and notch sensitivity reduction attributed to crushed basalt aggregates and an enhanced interfacial transition zone (ITZ). The research scrutinizes factors like material characterization, aggregate morphology, stress levels, and the displacement rate on crack formation. High-cycle fatigue tests show HPC-B’s superior performance, and the post-fatigue analysis reveals enhanced residual fracture toughness attributed to nano-level structural changes, stress redistribution and aggregate-matrix interaction. A 3D image analysis via Computed Tomography (CT) scans captures mesostructural crack propagation and provide quantitative insights. This research marks a significant shift from conventional aggregate-focused approaches and introduces a novel approach by integrating excess paste theory and mesoscale analysis, highlighting the critical role of aggregate choice in material characterization and mesoscale design in enhancing the structural efficiency of HPC. Furthermore, the study advances the understanding of HPC fatigue behaviour, emphasizing the interplay of aggregate types and morphologies and their dynamic response to cyclic loading, offering valuable insights for optimizing design guidelines and fostering innovation in structural engineering.
- Open Access
- 7 March 2024
- Published by MDPI AG in Preprints.org
Emphasis of Cyclic Loading on the Fracture Mechanism and Residual Fracture Toughness of High-Performance Concrete Considering the Morphological Properties of Aggregate
This research investigates the fatigue behaviour and fracture mechanics of high-performance concrete (HPC), including various compositions such as HPC with basalt aggregates (HPC-B), HPC with gravel (HPC-G), and high-strength coarse mortar (CM) static and cyclic tensile loading within the special priority program SPP 2020. The study aims to integrate fracture mechanics into structural analysis to enhance design guidelines for slender cross-sections and safety-related high-performance structural components. The experimental investigations reveal HPC-B's re-markable superiority, displaying higher compressive strength, modulus of elasticity, and tensile strength compared to HPC-G and CM. A modified disk-shaped compact tension (MDCT) based on ASTM standards, aided by digital image correlation (DIC) unveils fracture behaviour, empha-sizing fracture energy as a crucial parameter. HPC-B exhibits improved crack resistance and notch sensitivity reduction attributed to crushed basalt aggregates and enhanced interfacial transition zone (ITZ). The research scrutinizes factors like material characterization, aggregate morphology, stress levels, and displacement rate on crack formation. High-cycle fatigue tests show HPC-B's superior performance, and post-fatigue analysis reveals enhanced residual fracture toughness attributed to nano-level structural changes, stress redistribution and aggregate-matrix interac-tion. 3D image analysis via Computed Tomography (CT) scans captures mesostructural crack propagation and provide quantitative insights. This study advances the understanding of HPC fatigue behaviour, emphasizing the interplay of aggregate types, morphologies, and their dy-namic response to cyclic loading, offering valuable insights for optimizing design guidelines and fostering innovation in structural engineering.
- 7 March 2024
- Published by MDPI AG in Preprints.org
Open AccessEmphasis of Cyclic Loading on the Fracture Mechanism and Residual Fracture Toughness of High-Performance Concrete Considering the Morphological Properties of Aggregate
This research investigates the fatigue behaviour and fracture mechanics of high-performance concrete (HPC), including various compositions such as HPC with basalt aggregates (HPC-B), HPC with gravel (HPC-G), and high-strength coarse mortar (CM) static and cyclic tensile loading within the special priority program SPP 2020. The study aims to integrate fracture mechanics into structural analysis to enhance design guidelines for slender cross-sections and safety-related high-performance structural components. The experimental investigations reveal HPC-B's re-markable superiority, displaying higher compressive strength, modulus of elasticity, and tensile strength compared to HPC-G and CM. A modified disk-shaped compact tension (MDCT) based on ASTM standards, aided by digital image correlation (DIC) unveils fracture behaviour, empha-sizing fracture energy as a crucial parameter. HPC-B exhibits improved crack resistance and notch sensitivity reduction attributed to crushed basalt aggregates and enhanced interfacial transition zone (ITZ). The research scrutinizes factors like material characterization, aggregate morphology, stress levels, and displacement rate on crack formation. High-cycle fatigue tests show HPC-B's superior performance, and post-fatigue analysis reveals enhanced residual fracture toughness attributed to nano-level structural changes, stress redistribution and aggregate-matrix interac-tion. 3D image analysis via Computed Tomography (CT) scans captures mesostructural crack propagation and provide quantitative insights. This study advances the understanding of HPC fatigue behaviour, emphasizing the interplay of aggregate types, morphologies, and their dy-namic response to cyclic loading, offering valuable insights for optimizing design guidelines and fostering innovation in structural engineering.
- 4 September 2012
- Published by Springer Nature
- p. 513-520
Verstärkung von Betonbauteilen mit aufgeklebten CFK-Lamellen unter nicht vorwiegend ruhender Beanspruchung
- 4 September 2012
- Published by Springer Nature
- p. 513-520
Verstärkung von Betonbauteilen mit aufgeklebten CFK-Lamellen unter nicht vorwiegend ruhender Beanspruchung
- 4 September 2012
- Published by Springer Nature
- p. 255-261
Erhöhung der Verbundtragfähigkeit von CFK-Lamellen durch Bügelumschließungen
- 4 September 2012
- Published by Springer Nature
- p. 255-261
Erhöhung der Verbundtragfähigkeit von CFK-Lamellen durch Bügelumschließungen