Bernd Kramer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bernd Kramer has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
P. Muranyi
9 shared publicationsJ. Wunderlich
Fraunhofer Institute for Process Engineering and Packaging, Giggenhauser Straße 35, 85354, Freising, Germany
6 shared publicationsDaniela Warschat
Fraunhofer Institute for Process Engineering and Packaging , Department Retention of Food Quality, Giggenhauser Straße 35, 85354 Freising
2 shared publicationsJ. Thielmann
Fraunhofer Institute for Process Engineering and Packaging, Giggenhauser Straße 35, 85354 Freising, Germany
2 shared publicationsA. Hickisch
Fraunhofer Institute for Process Engineering and Packaging IVV; Freising Germany
1 shared publicationAnna Meepool
Fraunhofer Institute for Process Engineering and Packaging , Department Retention of Food Quality, Giggenhauser Straße 35, 85354 Freising
1 shared publication
Latest Publications
- 14 November 2024
- Published by Oxford University Press (OUP) in Journal of Applied Microbiology
- Vol. 135 (12)
How to validate UV-C based air cleaners using viruses containing aerosols in a test room
Aims: UV-C based air cleaners may reduce the transmission of infectious diseases. However, microbiological validation is necessary to quantify their efficiency. In this study, the stability of aerosolized bacteriophages for validation purposes was investigated in a test room, before a UV-C based air cleaner was exemplarily evaluated regarding the inactivation of airborne bacteriophages. Methods and results: The bacteriophage Phi6 was selected as virus surrogate and aerosolized in a room of 30 m³ volume. The recovery of infectious bacteriophages was first analyzed under variation of the relative humidity (20%–55% RH) and sampling time. The aerosol studies showed that a low humidity between 20% RH and 30% RH provides a high and stable recovery of bacteriophages Phi6 over 1 h. However, with increasing humidity, the number of infectious airborne bacteriophages Phi6 decreased significantly. At 50% RH, the recovery of Phi6 was 4 orders of magnitude lower compared to 20% RH. The validation of a UV-C based air cleaner was then demonstrated in the test room whereat the decline of infectious airborne bacteriophages was recorded over time. The nonenveloped bacteriophage MS2 was used as a reference. The validation results were significantly different for Phi6 when the humidity in the test room was either 40% RH or 30% RH, whereas comparable results were obtained for MS2 at both humidities. Conclusion: A rising humidity in the test room caused a significant decline in the recovery of infectious airborne bacteriophages Phi6. The result of a quantitative validation of UV-C based air cleaners may therefore be affected by the respective humidity.
- 14 November 2024
- Published by Oxford University Press (OUP) in Journal of Applied Microbiology
- Vol. 135 (12)
How to validate UV-C based air cleaners using viruses containing aerosols in a test room
Aims: UV-C based air cleaners may reduce the transmission of infectious diseases. However, microbiological validation is necessary to quantify their efficiency. In this study, the stability of aerosolized bacteriophages for validation purposes was investigated in a test room, before a UV-C based air cleaner was exemplarily evaluated regarding the inactivation of airborne bacteriophages. Methods and results: The bacteriophage Phi6 was selected as virus surrogate and aerosolized in a room of 30 m³ volume. The recovery of infectious bacteriophages was first analyzed under variation of the relative humidity (20%–55% RH) and sampling time. The aerosol studies showed that a low humidity between 20% RH and 30% RH provides a high and stable recovery of bacteriophages Phi6 over 1 h. However, with increasing humidity, the number of infectious airborne bacteriophages Phi6 decreased significantly. At 50% RH, the recovery of Phi6 was 4 orders of magnitude lower compared to 20% RH. The validation of a UV-C based air cleaner was then demonstrated in the test room whereat the decline of infectious airborne bacteriophages was recorded over time. The nonenveloped bacteriophage MS2 was used as a reference. The validation results were significantly different for Phi6 when the humidity in the test room was either 40% RH or 30% RH, whereas comparable results were obtained for MS2 at both humidities. Conclusion: A rising humidity in the test room caused a significant decline in the recovery of infectious airborne bacteriophages Phi6. The result of a quantitative validation of UV-C based air cleaners may therefore be affected by the respective humidity.
- Open Access
- 1 August 2022
- Published by Oxford University Press (OUP) in Journal of Applied Microbiology
- Vol. 133 (2) , 696-706
Disinfection of an ambulance using a compact atmospheric plasma device
Aims: The worldwide spread of the coronavirus SARS-CoV-2 has highlighted the need for fast and simple disinfection processes, amongst others for ambulance cars on site. To overcome current drawbacks regarding room disinfection, the use of cold atmospheric plasma in remote operation represents a promising alternative for the disinfection of larger volumes. In this study, a compact plasma system was evaluated regarding its disinfection efficiency inside an ambulance car. Methods and Results: The developed plasma device is based on a dielectric barrier discharge (DBD) and operates with ambient air as process gas. The humidified afterglow from the plasma nozzle was introduced into an ambulance car with a volume of approximately 10 m3 while Bacillus atrophaeus endospores, Staphylococcus aureus or Phi 6 bacteriophages dried on different surfaces (PET-films, glass slides or aluminum foil) were exposed to the reactive gas inside the ambulance vehicle at eight different positions. Reductions of spores by more than 4 orders of magnitude were found on all surfaces and positions within 2 h. Due to their higher susceptibility, Phi 6 bacteriophages and S. aureus counts were reduced by at least 4 orders of magnitude within 30 min on all surfaces. Conclusion: The results show that different microorganisms dried on variable surfaces can be inactivated by several orders of magnitude inside an ambulance by plasma gas from of a compact DBD plasma nozzle. Significance and Impact of the Study: Plasma gas generated on site by a DBD plasma nozzle proved to be highly efficient for the disinfection of the interior of an ambulance car. Compact plasma systems could be a viable alternative for the disinfection of vehicles or rooms.
- 1 August 2022
- Published by Oxford University Press (OUP) in Journal of Applied Microbiology
- Vol. 133 (2) , 696-706
Open AccessDisinfection of an ambulance using a compact atmospheric plasma device
Aims: The worldwide spread of the coronavirus SARS-CoV-2 has highlighted the need for fast and simple disinfection processes, amongst others for ambulance cars on site. To overcome current drawbacks regarding room disinfection, the use of cold atmospheric plasma in remote operation represents a promising alternative for the disinfection of larger volumes. In this study, a compact plasma system was evaluated regarding its disinfection efficiency inside an ambulance car. Methods and Results: The developed plasma device is based on a dielectric barrier discharge (DBD) and operates with ambient air as process gas. The humidified afterglow from the plasma nozzle was introduced into an ambulance car with a volume of approximately 10 m3 while Bacillus atrophaeus endospores, Staphylococcus aureus or Phi 6 bacteriophages dried on different surfaces (PET-films, glass slides or aluminum foil) were exposed to the reactive gas inside the ambulance vehicle at eight different positions. Reductions of spores by more than 4 orders of magnitude were found on all surfaces and positions within 2 h. Due to their higher susceptibility, Phi 6 bacteriophages and S. aureus counts were reduced by at least 4 orders of magnitude within 30 min on all surfaces. Conclusion: The results show that different microorganisms dried on variable surfaces can be inactivated by several orders of magnitude inside an ambulance by plasma gas from of a compact DBD plasma nozzle. Significance and Impact of the Study: Plasma gas generated on site by a DBD plasma nozzle proved to be highly efficient for the disinfection of the interior of an ambulance car. Compact plasma systems could be a viable alternative for the disinfection of vehicles or rooms.
- 1 August 2021
- Published by Elsevier in Food Control
- Vol. 126
Inhibition of Listeria monocytogenes on bologna by a beta acid rich hop extract
- 1 August 2021
- Published by Elsevier in Food Control
- Vol. 126
Inhibition of Listeria monocytogenes on bologna by a beta acid rich hop extract
- Open Access
- 23 November 2019
- Published by Oxford University Press (OUP) in Journal of Applied Microbiology
- Vol. 128 (4) , 920-933
Inactivation of bacterial endospores on surfaces by plasma processed air
Aims In case of biological hazards and pandemics, personal protective equipment of rescue forces is currently manually decontaminated with harmful disinfectants, primarily peracetic acid. To overcome current drawbacks regarding supply, handling and disposal of chemicals, the use of plasma processed air (PPA) represents a promising alternative for surface decontamination on site. In this study, the sporicidal efficiency of a portable plasma system, designed for field applications, was evaluated. Methods and Results The developed plasma device is based on a dielectric barrier discharge (DBD) and operated with ambient air as process gas. PPA from the plasma nozzle was flushed into a treatment chamber (volume: 300 L) and bacterial endospores (B. subtilis and B. atrophaeus) dried on different surfaces were treated under variable conditions. Reductions of spores by more than 4 log10 were found within 3 min of PPA exposure. However, the presence of endospores in agglomerates or in an organic matrix as well as the complexity of the respective surface microstructure negatively affected the inactivation efficiency. When endospores were embedded in a dried protein matrix, mechanical wiping with swabs during exposure to PPA increased the inactivation effect significantly. Gaseous ozone alone did not provide a sporicidal effect. Significant spore inactivation was only obtained when water vapor was injected into the PPA stream. Conclusion The results show that endospores dried on surfaces can be reduced by several orders of magnitude within few minutes in a treatment chamber which is flushed with PPA from of a DBD plasma nozzle. Significance and Impact of Study PPA generated on site by DBD plasma nozzles could be a suitable alternative for the disinfection of various surfaces in closed rooms.
- 23 November 2019
- Published by Oxford University Press (OUP) in Journal of Applied Microbiology
- Vol. 128 (4) , 920-933
Open AccessInactivation of bacterial endospores on surfaces by plasma processed air
Aims In case of biological hazards and pandemics, personal protective equipment of rescue forces is currently manually decontaminated with harmful disinfectants, primarily peracetic acid. To overcome current drawbacks regarding supply, handling and disposal of chemicals, the use of plasma processed air (PPA) represents a promising alternative for surface decontamination on site. In this study, the sporicidal efficiency of a portable plasma system, designed for field applications, was evaluated. Methods and Results The developed plasma device is based on a dielectric barrier discharge (DBD) and operated with ambient air as process gas. PPA from the plasma nozzle was flushed into a treatment chamber (volume: 300 L) and bacterial endospores (B. subtilis and B. atrophaeus) dried on different surfaces were treated under variable conditions. Reductions of spores by more than 4 log10 were found within 3 min of PPA exposure. However, the presence of endospores in agglomerates or in an organic matrix as well as the complexity of the respective surface microstructure negatively affected the inactivation efficiency. When endospores were embedded in a dried protein matrix, mechanical wiping with swabs during exposure to PPA increased the inactivation effect significantly. Gaseous ozone alone did not provide a sporicidal effect. Significant spore inactivation was only obtained when water vapor was injected into the PPA stream. Conclusion The results show that endospores dried on surfaces can be reduced by several orders of magnitude within few minutes in a treatment chamber which is flushed with PPA from of a DBD plasma nozzle. Significance and Impact of Study PPA generated on site by DBD plasma nozzles could be a suitable alternative for the disinfection of various surfaces in closed rooms.
- 1 September 2017
- Published by Elsevier in Systematic and Applied Microbiology
- Vol. 40 (6) , 383-387
ATP-synthesis capacity of pulsed light-exposed bacteria
- 1 September 2017
- Published by Elsevier in Systematic and Applied Microbiology
- Vol. 40 (6) , 383-387
ATP-synthesis capacity of pulsed light-exposed bacteria
- 15 February 2017
- Published by Oxford University Press (OUP) in Journal of Applied Microbiology
- Vol. 122 (4) , 830-856
Recent findings in pulsed light disinfection
Nonthermal disinfection technologies are gaining increasing interest in the field of minimally processed food in order to improve the microbial safety or to extend the shelf life. Especially fresh-cut produce or meat and fish products are vulnerable to microbial spoilage, but, due to their sensitivity, they require gentle preservation measures. The application of intense light pulses of a broad spectral range comprising ultraviolet, visible and near infrared irradiation is currently investigated as a potentially suitable technology to reduce microbial loads on different food surfaces or in beverages. Considerable research has been performed within the last two decades, in which the impact of various process parameters or microbial responses as well as the suitability of pulsed light (PL) for food applications has been examined. This review summarizes the outcome of the latest studies dealing with the treatment of various foods including the impact of PL on food properties as well as recent findings about the microbicidal action and relevant process parameters.
- 15 February 2017
- Published by Oxford University Press (OUP) in Journal of Applied Microbiology
- Vol. 122 (4) , 830-856
Recent findings in pulsed light disinfection
Nonthermal disinfection technologies are gaining increasing interest in the field of minimally processed food in order to improve the microbial safety or to extend the shelf life. Especially fresh-cut produce or meat and fish products are vulnerable to microbial spoilage, but, due to their sensitivity, they require gentle preservation measures. The application of intense light pulses of a broad spectral range comprising ultraviolet, visible and near infrared irradiation is currently investigated as a potentially suitable technology to reduce microbial loads on different food surfaces or in beverages. Considerable research has been performed within the last two decades, in which the impact of various process parameters or microbial responses as well as the suitability of pulsed light (PL) for food applications has been examined. This review summarizes the outcome of the latest studies dealing with the treatment of various foods including the impact of PL on food properties as well as recent findings about the microbicidal action and relevant process parameters.
- 21 August 2016
- Published by Oxford University Press (OUP) in Journal of Applied Microbiology
- Vol. 121 (4) , 988-997
Impact of pulsed light on cellular activity of Salmonella enterica
The objective of this study was a comprehensive characterization of physiological changes of Salmonella enterica induced by intense broad spectrum pulsed light (PL). After exposing the bacteria to this non-thermal decontamination technology on a gel surface, multiple viability parameters beyond culturability were assessed. By applying flow cytometry, a luciferin-luciferase bioluminescence assay and a microplate assay to measure the current redox activity, the impact of pulsed light on the membrane potential, membrane integrity, esterase activity, efflux pump activity, expression of the green fluorescent protein (GFP), respiration activity and ATP-content of Salmonella enterica ATCC BAA-1045 was determined. These culture independent methods for assessing the bacterial activity were compared to the ability to grow on tryptic soy agar. It is shown that this strain is rather sensitive to PL considering colony count reductions, while on the other hand unculturable bacteria still exhibit significant cellular energetic functions. However, this residual activity after PL exposure significantly decreases during sample storage in buffer for 24 h. This study also shows that the GFP expression of PL treated cells which have rendered unculturable is severely reduced. This study reveals that although not all cellular functions of Salmonella enterica are immediately shut down after PL exposure, the synthesis of new GFP is strongly reduced and affected to a similar extent as the culturability. It is shown for the first time, that even there is significant bacterial activity measurable after PL exposure, it is likely that non-growing pathogenic bacteria like Salmonella enterica are unable to express proteins, which is of great importance regarding their pathogenicity.
- 21 August 2016
- Published by Oxford University Press (OUP) in Journal of Applied Microbiology
- Vol. 121 (4) , 988-997
Impact of pulsed light on cellular activity of Salmonella enterica
The objective of this study was a comprehensive characterization of physiological changes of Salmonella enterica induced by intense broad spectrum pulsed light (PL). After exposing the bacteria to this non-thermal decontamination technology on a gel surface, multiple viability parameters beyond culturability were assessed. By applying flow cytometry, a luciferin-luciferase bioluminescence assay and a microplate assay to measure the current redox activity, the impact of pulsed light on the membrane potential, membrane integrity, esterase activity, efflux pump activity, expression of the green fluorescent protein (GFP), respiration activity and ATP-content of Salmonella enterica ATCC BAA-1045 was determined. These culture independent methods for assessing the bacterial activity were compared to the ability to grow on tryptic soy agar. It is shown that this strain is rather sensitive to PL considering colony count reductions, while on the other hand unculturable bacteria still exhibit significant cellular energetic functions. However, this residual activity after PL exposure significantly decreases during sample storage in buffer for 24 h. This study also shows that the GFP expression of PL treated cells which have rendered unculturable is severely reduced. This study reveals that although not all cellular functions of Salmonella enterica are immediately shut down after PL exposure, the synthesis of new GFP is strongly reduced and affected to a similar extent as the culturability. It is shown for the first time, that even there is significant bacterial activity measurable after PL exposure, it is likely that non-growing pathogenic bacteria like Salmonella enterica are unable to express proteins, which is of great importance regarding their pathogenicity.
- 1 April 2016
- Published by Elsevier in Journal of Microbiological Methods
- Vol. 123, 24-30
Monitoring the live to dead transition of bacteria during thermal stress by a multi-method approach
- 1 April 2016
- Published by Elsevier in Journal of Microbiological Methods
- Vol. 123, 24-30
Monitoring the live to dead transition of bacteria during thermal stress by a multi-method approach
- 4 September 2015
- Published by Oxford University Press (OUP) in Journal of Applied Microbiology
- Vol. 119 (4) , 999-1010
Pulsed light induced damages in Listeria innocua and Escherichia coli
Pulsed light (PL) is an upcoming nonthermal decontamination technology mainly used for surface sterilization. The objective of this study was to investigate the extent of cellular damage caused by PL treatments of Listeria innocua and Escherichia coli on a polysaccharide surface in order to gain knowledge about the main inactivation pathways. The impact of PL on the cellular ATP level was investigated as well as the bacterial ability to take up fluorescently labelled glucose (2-NBDG). Furthermore, the extent of DNA damages was assessed by qPCR. The ability of L. innocua and E. coli to photorepair under artificial daylight exposure was quantified. Finally, the induction of reactive oxygen species (ROS) and lipid peroxidation were studied by fluorometric detection of ROS and thiobarbituric acid reactive substances (TBARS). It is shown that intracellular ATP levels and glucose uptake ability do not correlate with the immediate loss of bacterial reproducibility, which indicates that cellular activity and energy may remain on a relatively high level, although growth on tryptic soy agar is not observable. Sequence specific investigation of PL induced DNA damages by qPCR revealed distinct differences between L. innocua and E. coli although the observed inactivation efficacy of PL by the culture based method was similar. Photoreactivation has been observed for both bacteria, a higher recovery rate of up to 2 log was seen in case of E. coli. Intracellular ROS and lipid peroxides were both detectable at relatively high fluencies with E. coli so the contribution of oxidative damage to microbial inactivation of PL cannot be excluded. Escherichia coli as well as L. innocua cells have proven to maintain residual cellular activity after having been exposed to PL even when they are not able to reproduce any more. High proportions of sublethal damages were also obvious with regard to occurring photoreactivation. The destruction of bacterial DNA seems to be the primary mechanism of inactivation of PL but the involvement of other factors like oxidative stress cannot be excluded. The observed data underline that bacteria are not immediately inactivated after exposure to PL as different indicators of cellular energy are still detectable even when cells do not reproduce on solid media any more. DNA is the primary target of PL, but as the extent of damage among different bacteria may not reveal their actual sensitivity, other destructive effects should also be considered.
- 4 September 2015
- Published by Oxford University Press (OUP) in Journal of Applied Microbiology
- Vol. 119 (4) , 999-1010
Pulsed light induced damages in Listeria innocua and Escherichia coli
Pulsed light (PL) is an upcoming nonthermal decontamination technology mainly used for surface sterilization. The objective of this study was to investigate the extent of cellular damage caused by PL treatments of Listeria innocua and Escherichia coli on a polysaccharide surface in order to gain knowledge about the main inactivation pathways. The impact of PL on the cellular ATP level was investigated as well as the bacterial ability to take up fluorescently labelled glucose (2-NBDG). Furthermore, the extent of DNA damages was assessed by qPCR. The ability of L. innocua and E. coli to photorepair under artificial daylight exposure was quantified. Finally, the induction of reactive oxygen species (ROS) and lipid peroxidation were studied by fluorometric detection of ROS and thiobarbituric acid reactive substances (TBARS). It is shown that intracellular ATP levels and glucose uptake ability do not correlate with the immediate loss of bacterial reproducibility, which indicates that cellular activity and energy may remain on a relatively high level, although growth on tryptic soy agar is not observable. Sequence specific investigation of PL induced DNA damages by qPCR revealed distinct differences between L. innocua and E. coli although the observed inactivation efficacy of PL by the culture based method was similar. Photoreactivation has been observed for both bacteria, a higher recovery rate of up to 2 log was seen in case of E. coli. Intracellular ROS and lipid peroxides were both detectable at relatively high fluencies with E. coli so the contribution of oxidative damage to microbial inactivation of PL cannot be excluded. Escherichia coli as well as L. innocua cells have proven to maintain residual cellular activity after having been exposed to PL even when they are not able to reproduce any more. High proportions of sublethal damages were also obvious with regard to occurring photoreactivation. The destruction of bacterial DNA seems to be the primary mechanism of inactivation of PL but the involvement of other factors like oxidative stress cannot be excluded. The observed data underline that bacteria are not immediately inactivated after exposure to PL as different indicators of cellular energy are still detectable even when cells do not reproduce on solid media any more. DNA is the primary target of PL, but as the extent of damage among different bacteria may not reveal their actual sensitivity, other destructive effects should also be considered.
- 1 February 2015
- Published by Elsevier in Journal of Food Protection
- Vol. 78 (2) , 340-348
Pulsed Light Decontamination of Endive Salad and Mung Bean Sprouts and Impact on Color and Respiration Activity
The objective of this study was the determination of the efficiency of pulsed light (PL) treatments for the decontamination of endive salad and mung bean sprouts, as well as the assessment of quality changes in relation to discoloration and alteration of respiration activity. Produce samples were artificially inoculated with two bacterial test strains Escherichia coli (DSM 498) and Listeria innocua (DSM 20649) and exposed to PL at different energy doses. The inactivation efficiency with regard to the naturally occurring microbiota was also investigated. Besides microbiological investigations, color changes were determined as well as the produce respiration during chilled storage. The results indicated that inactivation of more than 2 log was possible with one flash in the case of fresh-cut salad, while the reduction on mung bean sprouts was limited to approximately 1.6 log with one flash, irrespective if the natural flora or inoculated E. coli or L. innocua were considered. The UV part of the PL proved to be exclusively responsible for the inactivation of microorganisms. Significant lower levels of microbial counts of treated compared with untreated samples were maintained for up to 6 days. In the case of endive salad, a dose-dependent progressive discoloration and increase in respiration was diminished by applying optical bandpass filters, which only slightly affected the inactivation efficiency. In contrast, PL treatments showed a positive effect on color and general appearance of mung bean sprouts, while the respiration was almost unaffected. However, care must be taken with regard to efficiency-limiting matrix effects and impact on food quality. These aspects have to be assessed for each treated product. The integration of PL in industrial food processing plants could be an alternative way to improve the microbial quality of fresh produce, and therefore have a positive impact on public health by reducing the risk of contaminations with pathogenic bacteria.
- 1 February 2015
- Published by Elsevier in Journal of Food Protection
- Vol. 78 (2) , 340-348
Pulsed Light Decontamination of Endive Salad and Mung Bean Sprouts and Impact on Color and Respiration Activity
The objective of this study was the determination of the efficiency of pulsed light (PL) treatments for the decontamination of endive salad and mung bean sprouts, as well as the assessment of quality changes in relation to discoloration and alteration of respiration activity. Produce samples were artificially inoculated with two bacterial test strains Escherichia coli (DSM 498) and Listeria innocua (DSM 20649) and exposed to PL at different energy doses. The inactivation efficiency with regard to the naturally occurring microbiota was also investigated. Besides microbiological investigations, color changes were determined as well as the produce respiration during chilled storage. The results indicated that inactivation of more than 2 log was possible with one flash in the case of fresh-cut salad, while the reduction on mung bean sprouts was limited to approximately 1.6 log with one flash, irrespective if the natural flora or inoculated E. coli or L. innocua were considered. The UV part of the PL proved to be exclusively responsible for the inactivation of microorganisms. Significant lower levels of microbial counts of treated compared with untreated samples were maintained for up to 6 days. In the case of endive salad, a dose-dependent progressive discoloration and increase in respiration was diminished by applying optical bandpass filters, which only slightly affected the inactivation efficiency. In contrast, PL treatments showed a positive effect on color and general appearance of mung bean sprouts, while the respiration was almost unaffected. However, care must be taken with regard to efficiency-limiting matrix effects and impact on food quality. These aspects have to be assessed for each treated product. The integration of PL in industrial food processing plants could be an alternative way to improve the microbial quality of fresh produce, and therefore have a positive impact on public health by reducing the risk of contaminations with pathogenic bacteria.