R. McAdams
Research Subjects
R. McAdams has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
A. J. T. Holmes
Marcham Scientific, Hungerford, Berkshire RG17 0LH, United Kingdom
5 shared publicationsE. Surrey
EURATOM/CCFE Fusion Association, Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB, United Kingdom
3 shared publicationsA. F. Newman
UKAEA Culham Laboratory, Abingdon, Oxfordshire OX14 3DB, England
1 shared publicationA. Whitehead
EURATOM/CCFE Fusion Association, Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB, United Kingdom
1 shared publicationB. Stevens
EURATOM/CCFE Fusion Association, Culham Science Centre, Abingdon, Oxfordshire, OX14 3DB, United Kingdom
1 shared publicationD. B. King
Culham Science Centre 1 EURATOM/CCFE Association Abingdon, Oxfordshire OX14 3DB, United Kingdom
1 shared publication
Latest Publications
- 1 January 2015
- Published by Elsevier in Fusion Engineering and Design
- Vol. 90, 47-54
Control and calculation of the titanium sublimation pumping speed and re-ionisation in the MAST neutral beam injectors
- 1 January 2015
- Published by Elsevier in Fusion Engineering and Design
- Vol. 90, 47-54
Control and calculation of the titanium sublimation pumping speed and re-ionisation in the MAST neutral beam injectors
- Open Access
Control and calculation of the titanium sublimation pumping speed and re-ionisation in the MAST Neutral Beam Injectors
A high pumping speed is required in neutral beam injectors to minimise re-ionisation of the neutral beams. The neutral beam injectors on MAST use titanium sublimation pumps. These pumps do not have a constant pumping speed; their pumping speed depends on the gettering surface history and on both the integrated and applied gas load. In this paper we report a method of maintaining a constant pumping speed,through different evaporation schemes, suitable for operations of the MAST beamline for both short and relatively long beam pulses by measurement of the pressure in the beamline. In addition the MCNP code is then used to calculate the gas profile in the beamline by adjusting the input pumping speed to match the measured pressure. This allows the resulting gas profile to be used for calculation of the re-ionisation levels and an example is given.
Open AccessControl and calculation of the titanium sublimation pumping speed and re-ionisation in the MAST Neutral Beam Injectors
A high pumping speed is required in neutral beam injectors to minimise re-ionisation of the neutral beams. The neutral beam injectors on MAST use titanium sublimation pumps. These pumps do not have a constant pumping speed; their pumping speed depends on the gettering surface history and on both the integrated and applied gas load. In this paper we report a method of maintaining a constant pumping speed,through different evaporation schemes, suitable for operations of the MAST beamline for both short and relatively long beam pulses by measurement of the pressure in the beamline. In addition the MCNP code is then used to calculate the gas profile in the beamline by adjusting the input pumping speed to match the measured pressure. This allows the resulting gas profile to be used for calculation of the re-ionisation levels and an example is given.
- Open Access
Beyond ITER: Neutral beams for DEMO
In the development of magnetically confined fusion as an economically sustainable power source, ITER is currently under construction. Beyond ITER is the DEMO programme in which the physics and engineering aspects of a future fusion power plant will be demonstrated. DEMO will produce net electrical power. The DEMO programme will be outlined and the role of neutral beams for heating and current drive will be described. In particular, the importance of the efficiency of neutral beam systems in terms of injected neutral beam power compared to wallplug power will be discussed. Options for improving this efficiency including advanced neutralisers and energy recovery are discussed.
Open AccessBeyond ITER: Neutral beams for DEMO
In the development of magnetically confined fusion as an economically sustainable power source, ITER is currently under construction. Beyond ITER is the DEMO programme in which the physics and engineering aspects of a future fusion power plant will be demonstrated. DEMO will produce net electrical power. The DEMO programme will be outlined and the role of neutral beams for heating and current drive will be described. In particular, the importance of the efficiency of neutral beam systems in terms of injected neutral beam power compared to wallplug power will be discussed. Options for improving this efficiency including advanced neutralisers and energy recovery are discussed.
- 11 February 2013
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1515 (1) , 569
Preliminary results from the Small Negative Ion Facility (SNIF) at CCFE
At Culham Centre for Fusion Energy, a new beam extraction test facility has been built with the purpose of studying and enhancing negative ion beam production and transport. The multipole hydrogen ion source is based on a RF generated plasma using a continuous 5kW power supply operating at the industrial standard frequency of 13.56MHz. The cylindrical source has a diameter of 30cm and a depth of 20cm, with a flat spiral antenna driving the source through a quartz window. The magnet configuration is arranged to produce a dipole filter field across the ion source close to the plasma grid. The plasma load is matched to the RF generator using a Pi matching network. The accelerator uses a single extraction aperture of 14mm diameter, with a biased insert for electron suppression. The accelerator is a triode design with a beam energy of up to 30kV. The beamline consists of a turbomolecular pumped vacuum tank with an instrumented beam dump and ports for additional diagnostics. The ITER Neutral Beam source operates with the enhancement of caesium, which, when scaled up to a reactor, will be heavily consumed. The small size of SNIF allows for fast turn around of modifications and alternative materials to caesium can be tested. A full description of the facility and planned diagnostics is given. Initial results are presented, including measurements and calculations of the plasma load on the RF generator, and beam extraction measurements.
- 11 February 2013
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1515 (1) , 569
Preliminary results from the Small Negative Ion Facility (SNIF) at CCFE
At Culham Centre for Fusion Energy, a new beam extraction test facility has been built with the purpose of studying and enhancing negative ion beam production and transport. The multipole hydrogen ion source is based on a RF generated plasma using a continuous 5kW power supply operating at the industrial standard frequency of 13.56MHz. The cylindrical source has a diameter of 30cm and a depth of 20cm, with a flat spiral antenna driving the source through a quartz window. The magnet configuration is arranged to produce a dipole filter field across the ion source close to the plasma grid. The plasma load is matched to the RF generator using a Pi matching network. The accelerator uses a single extraction aperture of 14mm diameter, with a biased insert for electron suppression. The accelerator is a triode design with a beam energy of up to 30kV. The beamline consists of a turbomolecular pumped vacuum tank with an instrumented beam dump and ports for additional diagnostics. The ITER Neutral Beam source operates with the enhancement of caesium, which, when scaled up to a reactor, will be heavily consumed. The small size of SNIF allows for fast turn around of modifications and alternative materials to caesium can be tested. A full description of the facility and planned diagnostics is given. Initial results are presented, including measurements and calculations of the plasma load on the RF generator, and beam extraction measurements.
- 1 February 2012
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 83 (2) , 02B109
Sheath structure in negative ion sources for fusion (invited)
In fusion negative ion sources, the negative ions are formed on the caesiated plasma grid predominantly by hydrogen atoms from the plasma. The space charge of the negative ions leaving the wall is not fully compensated by incoming positive ions and at high enough emission a virtual cathode is formed. This virtual cathode limits the flux of negative ions transported across the sheath to the plasma. A 1D collisionless model of the sheath is presented taking into account the virtual cathode. The model will be applied to examples of the ion source operation. Extension of the model to the bulk plasma shows good agreement with experimental data. A possible role for fast ions is discussed.
- 1 February 2012
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 83 (2) , 02B109
Sheath structure in negative ion sources for fusion (invited)
In fusion negative ion sources, the negative ions are formed on the caesiated plasma grid predominantly by hydrogen atoms from the plasma. The space charge of the negative ions leaving the wall is not fully compensated by incoming positive ions and at high enough emission a virtual cathode is formed. This virtual cathode limits the flux of negative ions transported across the sheath to the plasma. A 1D collisionless model of the sheath is presented taking into account the virtual cathode. The model will be applied to examples of the ion source operation. Extension of the model to the bulk plasma shows good agreement with experimental data. A possible role for fast ions is discussed.
- 1 April 1994
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 65 (4) , 1153-1158
Intense negative ion sources at Culham Laboratory (invited)
- 1 April 1994
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 65 (4) , 1153-1158
Intense negative ion sources at Culham Laboratory (invited)
- 1 January 1990
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 61 (1) , 412-414
Recent results on negative ion production and extraction from the Culham Ion Source Test Stand
- 1 January 1990
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 61 (1) , 412-414
Recent results on negative ion production and extraction from the Culham Ion Source Test Stand
- 1 June 1988
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 59 (6) , 895-901
H− beam extraction experiments on the Culham small multipole source
Beam extraction experiments have been carried out on a multicusp volume H− ion source operated in a dc mode. With an extraction aperture of 16‐mm diameter, negative ion beams of up to 15 mA cm−2 have been extracted. Some experiments have been performed to investigate the physics of beam extraction from the plasma that indicate a fixed plasma boundary. The beam emittance has been measured as a function of various arc and accelerator parameters. The negative ion temperatures inferred from the emittance measurements cannot at present be explained.
- 1 June 1988
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 59 (6) , 895-901
H− beam extraction experiments on the Culham small multipole source
Beam extraction experiments have been carried out on a multicusp volume H− ion source operated in a dc mode. With an extraction aperture of 16‐mm diameter, negative ion beams of up to 15 mA cm−2 have been extracted. Some experiments have been performed to investigate the physics of beam extraction from the plasma that indicate a fixed plasma boundary. The beam emittance has been measured as a function of various arc and accelerator parameters. The negative ion temperatures inferred from the emittance measurements cannot at present be explained.