DEDarin R. Ernst

Darin R. Ernst

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Darin R. Ernst has a total of 119 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effects of tungsten radiative cooling on impurity, heat and momentum transport in DIII-D plasmas

    by A. Tema Biwole, T. Odstrčil, X. Litaudon, S. Shi, D. Ernst, C.F.B. Zimmermann, J. Lestz, N.T. Howard, P. Rodriguez-Fernandez, F. Khabanov, et al.

    A first-of-its-kind experiment was conducted in the DIII-D tokamak under WEST similarity constraints on plasma shape and core parameters. This work presents a detailed transport study comparing a reference regime dominated by intrinsic carbon radiation and a high-radiation regime resulting from controlled tungsten (W) injection using the laser blow-off system, with a core tungsten concentration n W / n e ∼ 3 × 10 − 4 and a radiated-power fraction f rad > 0.5 . The W-induced radiative cooling lowered the electron temperature, thereby decreasing T e / T i and stabilizing trapped-electron-mode (TEM) turbulence. This transition in turbulence regime reduced momentum and ion thermal diffusivities, yielding ion temperature peaking and a factor-of-two increase in toroidal rotation. At the outer plasma region, enhanced E × B shear and increased collisionality further suppressed ion-scale turbulence, causing a sharp drop in ion heat flux. Consequently, impurity transport, predominantly turbulent in the low-radiation regime, acquired a strong neoclassical inward W convection during radiative cooling, bootstrapping the cooling cycle. Despite f rad > 0.5 , radiative collapse was not observed, likely owing to collisional ion-to-electron energy exchange acting as an electron-energy reservoir, together with 1 / 1 MHD activity modulating the radiated power through core impurity neoclassical T i -screening. These results support preparation for a tungsten wall change in DIII-D by elucidating tungsten-induced turbulence stabilization. They also provide key insights for interpreting plasma performance in WEST and are relevant to future reactors expected to operate with radiating tungsten-walled plasmas.


  • A coherent structure transport model for scrape-off layer turbulence

    by Zhichen Feng, James Myra, Junyi Cheng, Calder Haubrich, Yang Chen, Xinxing Ma, Darin R. Ernst, Scott Parker

    Understanding the locality of high-temperature plasma energy deposition on material surfaces in fusion reactors is critical for design. Here, we utilize the gyrokinetic electromagnetic turbulence, including X-points simulation, using ions as tracer particles, together with SOLPS-ITER solutions for the background equilibrium electric field, including drifts, to model the heat flux at the divertor plate and characterize the heat load width using realistic X-point geometry. We use a theory-based blobby transport model called the “Coherent Structure Transport” (CST) model to include the effect of plasma transport in the edge scrape-off layer. The CST model is extremely fast and can be used to quickly analyze any SOLPS-ITER solution. SOLPS-ITER provides the steady state, or equilibrium, on which we superimpose blobby turbulence characterized by blob size, amplitude,e and frequency. We obtain the 1/Bp scaling of the heat load exponential decay width λq, in agreement with the Eich empirical scaling and with the Goldston heuristic theory. When including blobby turbulence in combination with the SOLPS-ITER electric field, we find a secondary peak in the heat flux radial profile, outwardly displaced from the strike point radius, with a relative amplitude that increases with the initial blob density. We describe the CST model in detail and provide initial investigations of the scaling of λq and the secondary heat flux peak with blob size and amplitude.

  • Open Access

    Characterizing impurity sourcing and transport in the high temperature boundary of DIII-D wide pedestal QH-mode plasmas

    by X. Ma, T. Abrams, D.R. Ernst, H.Q. Wang, A. Bortolon, X. Chen, T. Odstrcil, T. Osborne, F. Scotti, D.M. Thomas, et al.

    Wide Pedestal QH-mode (WPQH) plasmas in the DIII-D tokamak show a sheath limited SOL, where electron density and temperature remain nearly constant along field lines from the midplane to the divertor. Consequently, parallel gradients are weak. The first Langmuir probe measurements in this regime point to a high sheath temperature with target electron temperature T e up to ∼150 eV, leading to high carbon self-sputtering. Midplane carbon densities from SOLPS-ITER modeling of these plasmas in a double-null configuration fall far below experimental measurements unless full drifts are activated. In the drift-dependent SOLPS-ITER modeling, anomalous poloidally uniform, radially varying transport is adjusted to match measured radial electron temperature and density profiles in the pedestal and SOL region. The resulting carbon density (C6+) matches measured carbon densities just inside the separatrix. The C2+ density near the outer strike point is also consistent with spectroscopic imaging. With the ion B × ∇B drift towards the X-point, carbon in the lower divertors is redistributed from the private flux region to the high field side (HFS) and pushed upstream in the SOL by poloidal E × B drifts. The B × ∇ B drift dominates the radial flow of carbon as it moves upstream. Simulations with reversed toroidal field (ion B × ∇ B drift away from the X-point) show a radically different behavior, where carbon accumulates on the low field side in lower divertors, and is pushed towards the HFS in the upper divertors, indicating a strong effect of particle drifts on impurity distribution. In double-null configurations which are usually used in WPQH plasmas, these drift effects tend to counterbalance, so that the carbon density and Z eff are reduced at the outer mid-plane only modestly, by around 7% in the modeling. Further predictivemodeling indicates that the carbon density can be significantly reduced by an order of magnitude by implementing a single-null shape with reversed toroidal field.


  • Open Access

    The role of ion-scale micro-turbulence in pedestal width of the DIII-D wide-pedestal QH mode

    by Zeyu Li, Xi Chen, Xiang Jian, Darin Ernst, Xueqiao Xu, R.J. Groebner, Huiqian Wang, T.H. Osborne, K.H. Burrell, the DIII-D Team

    The low-edge rotation, intrinsically ELM-free, and improved confinement wide-pedestal quiescent H-mode (QH-mode), discovered in DIII-D tokamak, has pedestal widths exceeding the EPED-kinetic-ballooning mode (KBM) model scaling typically by at least 25%. Ion-scale ( k y ρ s < 1) microturbulence and its role in setting the pedestal structure is investigated using the radially local δ f gyrokinetic code CGYRO. The electromagnetic trapped electron mode (TEM) is unstable at the pedestal top, while plasma beta ( β e ) is ∼60% below the KBM onset threshold and the electron temperature gradient mode is found to be unstable in the peak gradient region. Nonlinear simulation reveals that the ion-scale turbulence could produce electron energy flux consistent with the flux inferred from power balance at the pedestal top, with a reasonable variation of the local E × B shearing rate; and the local neoclassical transport from NEO is dominant over the simulated turbulent transport in the ion energy flux channel. The simulated ion-scale turbulence produces much lower electron energy flux than inferred from experiment in the pedestal peak gradient region. A correction to the EPED-KBM pedestal width scaling is obtained based on the two-dimensional scan of pedestal top plasma beta ( β e ) and normalized electron density and temperature scale lengths, a / L n e , a / L T e using CGYRO linear simulations. Mode transitions among TEM, micro-tearing mode, ion-temperature gradient mode and KBM, are observed in the 2D scan at the pedestal top. A fixed normalized growth rate for these drift-type modes is taken to determine the pedestal width scaling, which shows good consistency with the QH experimental database on pedestal heights and widths. The onset of KBM instabilities and the local E × B shear suppression criterion set the lower and upper limit for the pedestal width of standard QH-mode, wide-pedestal QH-mode and type-I ELMy H mode. A potentially higher and wider pedestal is expected from the new scaling of pedestal width. This work presents an improved understanding of the ion-scale micro-turbulence of wide-pedestal QH-mode and sheds light on a promising scenario for future reactors, including ITER and beyond.


  • Top Cited Papers
    Open Access

    Overview of results from the 2023 DIII-D negative triangularity campaign

    by K E Thome, M E Austin, A Hyatt, A Marinoni, A O Nelson, C Paz-Soldan, F Scotti, W Boyes, L Casali, C Chrystal, et al.

    Negative triangularity (NT) is a potentially transformative configuration for tokamak-based fusion energy with its high-performance core, edge localized mode (ELM)-free edge, and low-field-side divertors that could readily scale to an integrated reactor solution. Previous NT work on the TCV and DIII-D tokamaks motivated the installation of graphite-tile armor on the low-field-side lower outer wall of DIII-D. A dedicated multiple-week experimental campaign was conducted to qualify the NT scenario for future reactors. During the DIII-D NT campaign, high confinement ( H 98 y , 2 ≳ 1), high current ( q 95 < 3), and high normalized pressure plasmas ( β N > 2.5) were simultaneously attained in strongly NT-shaped discharges with average triangularity δ avg = −0.5 that were stably controlled. Experiments covered a wide range of DIII-D operational space (plasma current, toroidal field, electron density and pressure) and did not trigger an ELM in a single discharge as long as sufficiently strong NT was maintained; in contrast, to other high-performance ELM-suppression scenarios that have narrower operating windows. These strong NT plasmas had a lower outer divertor X-point shape and maintained a non-ELMing edge with an electron temperature pedestal, exceeding that of typical L-mode plasmas. Also, the following was achieved during the campaign: high normalized density ( n e / n GW of at least 1.7), particle confinement comparable to energy confinement with Z eff ∼ 2 , a detached divertor without impurity seeding, and a mantle radiation scenario using extrinsic impurities. These results are promising for a NT fusion pilot plant but further questions on confinement extrapolation and core-edge integration remain, which motivate future NT studies on DIII-D and beyond.


  • Broadening of the Divertor Heat Flux Profile in High Confinement Tokamak Fusion Plasmas with Edge Pedestals Limited by Turbulence in DIII-D

    by D. R. Ernst, A. Bortolon, C. S. Chang, S. Ku, F. Scotti, H. Q. Wang, Z. Yan, Jie Chen, C. Chrystal, F. Glass, et al.

    Multimachine empirical scaling predicts an extremely narrow heat exhaust layer in future high magnetic field tokamaks, producing high power densities that require mitigation. In the experiments presented, the width of this exhaust layer is nearly doubled using actuators to increase turbulent transport in the plasma edge. This is achieved in low collisionality, high confinement edge pedestals with their gradients limited by turbulent transport instead of large-scale, coherent instabilities. The exhaust heat flux profile width and divertor leg diffusive spreading both double as a high frequency band of turbulent fluctuations propagating in the electron diamagnetic direction doubles in amplitude. The results are quantitatively reproduced in electromagnetic XGC particle-in-cell simulations which show the heat flux carried by electrons emerges to broaden the heat flux profile, directly supported by Langmuir probe measurements.


  • Open Access

    Flux-driven simulations of self-generated radial electric fields and transition to improved confinement regime

    by Zhenyu Zhou, G. S. Xu, Chao Dong, Zhixin Lu, Tianchun Zhou, Changzhi Jiang, Bo Li, D. R. Ernst

    The evolution of plasma profiles and radial electric fields in the edge of tokamaks during a transition to an improved confinement regime is explored in an unfavorable configuration based on self-consistent, flux-driven simulations of reduced Braginskii models with ion pressure dynamics. The edge plasma response to the heating power is explored by varying the heat source strength. The energy transfer from turbulent to mean flows is induced by the large-amplitude fluctuations as the power input becomes sufficiently strong. It is found that ion pressure fluctuations play an important role in the generation of the Reynolds power. Consequently, the plasma spontaneously forms radial electric fields localized at the edge, which reduces the radial correlation and amplitudes of edge fluctuations. An edge temperature pedestal also forms while the density profiles remain nearly unchanged, featuring an I-mode-like regime.

  • Improved multispecies Dougherty collisions

    by Manaure Francisquez, James Juno, Ammar Hakim, Gregory W. Hammett, Darin R. Ernst

    The Dougherty model Fokker–Planck operator is extended to describe nonlinear full- $f$ ( f is the distribution function) collisions between multiple species in plasmas. Simple relations for cross-species primitive moments are developed which obey conservation laws, and reproduce familiar velocity and temperature relaxation rates. This treatment of multispecies Dougherty collisions, valid for arbitrary mass ratios, avoids unphysical temperatures and satisfies the $H$ -theorem (H is related to the entropy) unlike an analogous Bhatnagar–Gross–Krook operator. Formulas for both a Cartesian velocity space and a gyroaveraged operator are provided for use in Vlasov as well as long-wavelength gyrokinetic models. We present an algorithm for the discontinuous Galerkin discretization of this operator, and provide results from relaxation and Landau damping benchmarks.


  • Importance of gyrokinetic exact Fokker-Planck collisions in fusion plasma turbulence

    by Qingjiang Pan, Darin R. Ernst, David R. Hatch

    Gyrokinetic simulations of turbulence are fundamental to understanding and predicting particle and energy loss in magnetic fusion devices. Previous works have used model collision operators with approximate field-particle terms of unknown accuracy and/or have neglected collisional finite Larmor radius effects. This work moves beyond models to demonstrate important corrections using a gyrokinetic Fokker-Planck collision operator with the exact field-particle terms, in realistic simulations of turbulence in magnetically confined fusion plasmas. The exact operator shows significant corrections for temperature-gradient-driven trapped electron mode turbulence and zonal flow damping, and for microtearing modes in a Joint European Torus pedestal under ITER-like wall conditions. Analysis of the corrections using parameter scans motivates an accurate model which closely reproduces the exact results while reducing computational demands.


  • Open Access

    First implementation of gyrokinetic exact linearized Landau collision operator and comparison with models

    by Qingjiang Pan, Darin R. Ernst, Paul Crandall

    Gyrokinetic simulations are fundamental to understanding and predicting turbulent transport in magnetically confined fusion plasmas. Previous simulations have used model collision operators with approximate field-particle terms of unknown accuracy and/or have neglected collisional finite Larmor radius (FLR) effects. We have implemented the linearized Fokker–Planck collision operator with exact field-particle terms and full FLR effects in a gyrokinetic code (GENE). The new operator, referred to as “exact” in this paper, allows the accuracy of model collision operators to be assessed. The conservative Landau form is implemented because its symmetry underlies the conservation laws and the H-theorem, and enables numerical methods to preserve this conservation, independent of resolution. The implementation utilizes the finite-volume method recently employed to discretize the Sugama collision model in GENE, allowing direct comparison between the two operators. Results show that the Sugama model appears accurate for the growth rates of trapped electron modes (TEMs) driven only by density gradients, but appreciably underestimates the growth rates as the collisionality and electron temperature gradient increase. The TEM turbulent fluxes near the nonlinear threshold using the exact operator are similar to the Sugama model for the η e = d   ln   T e / d   ln   n e = 0 case, but substantially larger than the Sugama model for the η e = 1 case. The FLR effects reduce the growth rates increasingly with wavenumber, deepening a “valley” at the intermediate binormal wavenumber as the unstable mode extends from the TEM regime to the electron temperature gradient instability regime. Application to the Hinton–Rosenbluth problem shows that zonal flows decay faster as the radial wavenumber increases and the exact operator yields weaker decay rates.