Shoko Kume
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Shoko Kume has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
Kazuyuki Kubo
Graduate School of Advanced Science and Engineering Hiroshima University Kagamiyama Higashi‐Hiroshima 739–8526 Japan
9 shared publicationsTsutomu Mizuta
Graduate School of Advanced Science and Engineering Hiroshima University Kagamiyama Higashi‐Hiroshima 739–8526 Japan
8 shared publications- Hiroshi Nishihara
Research Institute for Science and Technology, Tokyo University of Science, 2641, Yamazaki, Noda, Chiba 278-8510, Japan
4 shared publications Ryota Igarashi
Department of Chemistry, Graduate School of Science Hiroshima University 1-2-1, Kagamiyama Higashi-Hiroshima Japan
3 shared publicationsRyuji Takeuchi
Department of Chemistry, Graduate School of Science Hiroshima University 1-2-1, Kagamiyama Higashi-Hiroshima Japan
3 shared publicationsAkihiro Suzuki
Clean Energy Research Center Yamanashi University Kofu 400–8510 Japan
2 shared publications
Latest Publications
- Open Access
- 19 March 2026
- Published by Wiley in ChemistryEurope
- Vol. 4 (3) , e70274
Cover Feature: Surface Modification via Click Chemistry Enhances CO 2 Reduction Selectivity between C 2+ /C 1 on Shape‐Controlled Cu 2 O (ChemistryEurope 3/2026)
- 19 March 2026
- Published by Wiley in ChemistryEurope
- Vol. 4 (3) , e70274
Open AccessCover Feature: Surface Modification via Click Chemistry Enhances CO 2 Reduction Selectivity between C 2+ /C 1 on Shape‐Controlled Cu 2 O (ChemistryEurope 3/2026)
- 2 February 2026
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 21 (3) , e70606
Solvent‐Guided Galvanic Replacement of Ag on Cu Nanowires: Dynamic Structural Evolution for CO 2 Electrolysis
Galvanic replacement is a powerful strategy for incorporating heterometal atoms into preformed metallic nanostructures. However, the resulting architectures are highly sensitive to the reaction environment, which influences the relative stability and solubility of the redox species involved. Previous studies on Cu–Ag nanocatalysts synthesized via galvanic replacement have reported diverse product selectivities, underscoring the need for a systematic investigation of the process. In this work, we performed galvanic replacement of Cu nanowires with Ag ions in various solvents and evaluated the resulting nanostructures and their performance in CO 2 electroreduction. The choice of solvent significantly affected the dispersity of the nanocomposites, the size of Ag nanocrystals, and the structure and chemical state of oxidized Cu species. Among these factors, the size of the Ag nanocrystals emerged as the dominant parameter influencing CO 2 electrolysis selectivity, despite notable variations in the Cu species oxidized in different solvents. The results suggest that methane production sites are formed during electrolysis via the reconstruction of Cu nanoparticles on the surface of large Ag crystal facets. This highlights the critical role of copper structural reconstruction during CO 2 electroreduction, particularly when the initial Cu species are readily deformable due to their nanoscale dimension.
- 2 February 2026
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 21 (3) , e70606
Solvent‐Guided Galvanic Replacement of Ag on Cu Nanowires: Dynamic Structural Evolution for CO 2 Electrolysis
Galvanic replacement is a powerful strategy for incorporating heterometal atoms into preformed metallic nanostructures. However, the resulting architectures are highly sensitive to the reaction environment, which influences the relative stability and solubility of the redox species involved. Previous studies on Cu–Ag nanocatalysts synthesized via galvanic replacement have reported diverse product selectivities, underscoring the need for a systematic investigation of the process. In this work, we performed galvanic replacement of Cu nanowires with Ag ions in various solvents and evaluated the resulting nanostructures and their performance in CO 2 electroreduction. The choice of solvent significantly affected the dispersity of the nanocomposites, the size of Ag nanocrystals, and the structure and chemical state of oxidized Cu species. Among these factors, the size of the Ag nanocrystals emerged as the dominant parameter influencing CO 2 electrolysis selectivity, despite notable variations in the Cu species oxidized in different solvents. The results suggest that methane production sites are formed during electrolysis via the reconstruction of Cu nanoparticles on the surface of large Ag crystal facets. This highlights the critical role of copper structural reconstruction during CO 2 electroreduction, particularly when the initial Cu species are readily deformable due to their nanoscale dimension.
- Open Access
- 5 November 2025
- Published by Wiley in ChemistryEurope
- Vol. 4 (2)
Surface Modification via Click Chemistry Enhances CO 2 Reduction Selectivity between C 2+ /C 1 on Shape‐Controlled Cu 2 O
Molecular fabrication of metal surfaces has potential to harness diverse surface processes, such as CO 2 electrolysis on copper. CO 2 reduction is influenced not only by the local environment of the active copper atom but also by the surface atomic order, surface dynamics under electrode polarization, and mass transport. CO 2 reduction on two types of Cu 2 O‐derived Cu metal, modified with chemically identical organic layers, is studied. Surface click chemistry enables uniform modification, precisely replicating the surface morphologies of 2D‐packed and dispersed nanocubic Cu 2 O. In both types of catalysts, the modification affects CO 2 reduction, but with markedly different selectivity. On 2D‐packed Cu 2 O, the modified organic layer forms two distinct functional domains, one promoting proton reduction and the other facilitating CO adsorption, on a continuous copper surface. These domains cooperatively promote the formation of C 2+ products. In modified nanocubic Cu 2 O, where a limited number of copper atoms are enclosed in the organic layer shell, the crystal regularity of reduced Cu is disrupted significantly inhibiting CC bond formation. Assisted by proton transport through organic layer, this surface instead selectively produces methane. These results highlight the multifunctional effects of molecular modification, which creates distinct yet cooperative domains and induces surface atom restructuring.
- 5 November 2025
- Published by Wiley in ChemistryEurope
- Vol. 4 (2)
Open AccessSurface Modification via Click Chemistry Enhances CO 2 Reduction Selectivity between C 2+ /C 1 on Shape‐Controlled Cu 2 O
Molecular fabrication of metal surfaces has potential to harness diverse surface processes, such as CO 2 electrolysis on copper. CO 2 reduction is influenced not only by the local environment of the active copper atom but also by the surface atomic order, surface dynamics under electrode polarization, and mass transport. CO 2 reduction on two types of Cu 2 O‐derived Cu metal, modified with chemically identical organic layers, is studied. Surface click chemistry enables uniform modification, precisely replicating the surface morphologies of 2D‐packed and dispersed nanocubic Cu 2 O. In both types of catalysts, the modification affects CO 2 reduction, but with markedly different selectivity. On 2D‐packed Cu 2 O, the modified organic layer forms two distinct functional domains, one promoting proton reduction and the other facilitating CO adsorption, on a continuous copper surface. These domains cooperatively promote the formation of C 2+ products. In modified nanocubic Cu 2 O, where a limited number of copper atoms are enclosed in the organic layer shell, the crystal regularity of reduced Cu is disrupted significantly inhibiting CC bond formation. Assisted by proton transport through organic layer, this surface instead selectively produces methane. These results highlight the multifunctional effects of molecular modification, which creates distinct yet cooperative domains and induces surface atom restructuring.
- Open Access
- 11 September 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 60 (87) , 12662-12676
Spectrometric monitoring of CO2 electrolysis on a molecularly modified copper surface
Recent works on in situ monitoring of organically modified copper with vibrational spectroscopy have revealed a wide scale of effect modifiers can cause on CO2 electrolysis performance, which can also help design active organic/copper interface.
- 11 September 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 60 (87) , 12662-12676
Open AccessSpectrometric monitoring of CO2 electrolysis on a molecularly modified copper surface
Recent works on in situ monitoring of organically modified copper with vibrational spectroscopy have revealed a wide scale of effect modifiers can cause on CO2 electrolysis performance, which can also help design active organic/copper interface.
- 2 October 2023
- Published by Wiley in Chemistry – A European Journal
- Vol. 29 (63) , e202302303
Redox Activity of IrIII Complexes with Multidentate Ligands Based on Dipyrido‐Annulated N‐Heterocyclic Carbenes: Access to High Valent and High Spin State with Carbon Donors
Synthetic strategies to access high‐valent iridium complexes usually require use of π donating ligands bearing electronegative atoms (e. g. amide or oxide) or σ donating electropositive atoms (e. g. boryl or hydride). Besides the η5‐(methyl)cyclopentadienyl derivatives, high‐valent η1 carbon‐ligated iridium complexes are challenging to synthesize. To meet this challenge, this work reports the oxidation behavior of an all‐carbon‐ligated anionic bis(CCC‐pincer) IrIII complex. Being both σ and π donating, the diaryl dipyrido‐annulated N‐heterocyclic carbene (dpa‐NHC) IrIII complex allowed a stepwise 4e− oxidation sequence. The first 2e− oxidation led to an oxidative coupling of two adjacent aryl groups, resulting in formation of a cationic chiral IrIII complex bearing a CCCC‐tetradentate ligand. A further 2e− oxidation allowed isolation of a high‐valent tricationic complex with a triplet ground state. These results close a synthetic gap for carbon‐ligated iridium complexes and demonstrate the electronic tuning potential of organic π ligands for unusual electronic properties.
- 2 October 2023
- Published by Wiley in Chemistry – A European Journal
- Vol. 29 (63) , e202302303
Redox Activity of IrIII Complexes with Multidentate Ligands Based on Dipyrido‐Annulated N‐Heterocyclic Carbenes: Access to High Valent and High Spin State with Carbon Donors
Synthetic strategies to access high‐valent iridium complexes usually require use of π donating ligands bearing electronegative atoms (e. g. amide or oxide) or σ donating electropositive atoms (e. g. boryl or hydride). Besides the η5‐(methyl)cyclopentadienyl derivatives, high‐valent η1 carbon‐ligated iridium complexes are challenging to synthesize. To meet this challenge, this work reports the oxidation behavior of an all‐carbon‐ligated anionic bis(CCC‐pincer) IrIII complex. Being both σ and π donating, the diaryl dipyrido‐annulated N‐heterocyclic carbene (dpa‐NHC) IrIII complex allowed a stepwise 4e− oxidation sequence. The first 2e− oxidation led to an oxidative coupling of two adjacent aryl groups, resulting in formation of a cationic chiral IrIII complex bearing a CCCC‐tetradentate ligand. A further 2e− oxidation allowed isolation of a high‐valent tricationic complex with a triplet ground state. These results close a synthetic gap for carbon‐ligated iridium complexes and demonstrate the electronic tuning potential of organic π ligands for unusual electronic properties.
- 23 June 2022
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 58 (58) , 8053-8056
Uniform wrapping of copper(i) oxide nanocubes by self-controlled copper-catalyzed azide–alkyne cycloaddition toward selective carbon dioxide electrocatalysis
Cu2O nanocubes were wrapped with an extremely uniform layer through self-controlled growth on their surface, improving their CO2 reduction selectivity.
- 23 June 2022
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 58 (58) , 8053-8056
Uniform wrapping of copper(i) oxide nanocubes by self-controlled copper-catalyzed azide–alkyne cycloaddition toward selective carbon dioxide electrocatalysis
Cu2O nanocubes were wrapped with an extremely uniform layer through self-controlled growth on their surface, improving their CO2 reduction selectivity.
- Open Access
- 18 May 2020
- Published by Wiley in ChemElectroChem
- Vol. 7 (12) , 2496
Cover Feature: Substituent‐Biased CO2 Reduction on Copper Cathodes Modified with Spaced Organic Structures (ChemElectroChem 12/2020)
- 18 May 2020
- Published by Wiley in ChemElectroChem
- Vol. 7 (12) , 2496
Open AccessCover Feature: Substituent‐Biased CO2 Reduction on Copper Cathodes Modified with Spaced Organic Structures (ChemElectroChem 12/2020)
- 21 April 2020
- Published by Wiley in ChemElectroChem
- Vol. 7 (12) , 2575-2581
Substituent‐Biased CO2 Reduction on Copper Cathodes Modified with Spaced Organic Structures
CO2 reduction directed by organic moieties on Cu cathodes was studied by adopting a newly developed on‐surface modification method. Organic groups compatible with exposed Cu surface atoms were introduced by electrochemically activated Cu(I)‐catalyzed azide alkyne cycloaddition (CuAAC). Three different ethylnyl precursors, each containing 1,3,5‐phenyl, tertiary amine, and 2,5‐pyridyl moieties, were introduced onto a Cu cathode, by reacting with a three‐way azide precursor. The structural characterization of modified electrodes revealed that the modification yielded surfaces composed of exposed surface Cu atoms capable of cooperating with the introduced, barely soluble, organic polymer. The presence of an organic layer on the Cu resulted in improved CO2 reduction efficiency over H2 evolution. The methane/ethylene selectivity was dependent on the kind of moieties used. The proton supplier ability of the modified organic moiety turned out to be involved in the selectivity, as well as with surface copper rearrangement upon anodization. These findings demonstrate that the organic groups at cooperating sites on the surface Cu can offer a powerful tool for selective CO2 reduction.
- 21 April 2020
- Published by Wiley in ChemElectroChem
- Vol. 7 (12) , 2575-2581
Substituent‐Biased CO2 Reduction on Copper Cathodes Modified with Spaced Organic Structures
CO2 reduction directed by organic moieties on Cu cathodes was studied by adopting a newly developed on‐surface modification method. Organic groups compatible with exposed Cu surface atoms were introduced by electrochemically activated Cu(I)‐catalyzed azide alkyne cycloaddition (CuAAC). Three different ethylnyl precursors, each containing 1,3,5‐phenyl, tertiary amine, and 2,5‐pyridyl moieties, were introduced onto a Cu cathode, by reacting with a three‐way azide precursor. The structural characterization of modified electrodes revealed that the modification yielded surfaces composed of exposed surface Cu atoms capable of cooperating with the introduced, barely soluble, organic polymer. The presence of an organic layer on the Cu resulted in improved CO2 reduction efficiency over H2 evolution. The methane/ethylene selectivity was dependent on the kind of moieties used. The proton supplier ability of the modified organic moiety turned out to be involved in the selectivity, as well as with surface copper rearrangement upon anodization. These findings demonstrate that the organic groups at cooperating sites on the surface Cu can offer a powerful tool for selective CO2 reduction.
- Open Access
- 17 December 2019
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 7, 860
On-Surface Modification of Copper Cathodes by Copper(I)-Catalyzed Azide Alkyne Cycloaddition and CO2 Reduction in Organic Environments
In this study, organic structures were introduced onto copper cathodes to induce changes in their electrocatalytic CO2 reduction activity. Poorly soluble organic polymers were distributed onto the copper surface as a thin layer by polymerizing monomeric precursors via a copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) activated by anodization of the copper substrate. The resulting structure possesses copper surface atoms that are available to participate in the CO2 reduction reaction—comparable to close-contact organic structures—and stabilize the adsorption of organic layers through the CO2 reduction process. The CO2 reduction performance of the on-surface modified copper cathode exhibited improved CO2 reduction over H2 evolution compared with traditional cast modification systems. Preventing organic moieties from forming densely packed assemblies on the metal surface appears to be important to promote the CO2 reduction process on the copper atoms. The suppression of H2 evolution, a high methane/ethylene ratio, and the influence of stirring demonstrate that the improved CO2 reduction activity is not only a result of the copper atom reorganization accompanied by repeating anodization for modification; the organic layer also apparently plays an important role in proton transfer and CO2 accumulation onto the copper surface.
- 17 December 2019
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 7, 860
Open AccessOn-Surface Modification of Copper Cathodes by Copper(I)-Catalyzed Azide Alkyne Cycloaddition and CO2 Reduction in Organic Environments
In this study, organic structures were introduced onto copper cathodes to induce changes in their electrocatalytic CO2 reduction activity. Poorly soluble organic polymers were distributed onto the copper surface as a thin layer by polymerizing monomeric precursors via a copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) activated by anodization of the copper substrate. The resulting structure possesses copper surface atoms that are available to participate in the CO2 reduction reaction—comparable to close-contact organic structures—and stabilize the adsorption of organic layers through the CO2 reduction process. The CO2 reduction performance of the on-surface modified copper cathode exhibited improved CO2 reduction over H2 evolution compared with traditional cast modification systems. Preventing organic moieties from forming densely packed assemblies on the metal surface appears to be important to promote the CO2 reduction process on the copper atoms. The suppression of H2 evolution, a high methane/ethylene ratio, and the influence of stirring demonstrate that the improved CO2 reduction activity is not only a result of the copper atom reorganization accompanied by repeating anodization for modification; the organic layer also apparently plays an important role in proton transfer and CO2 accumulation onto the copper surface.
- 14 July 2016
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 52 (69) , 10486-10489
Selection of two optional covalent bonds by electric stimuli: dual catalytic switching of redox-active copper
Two types of redox functionality were selected for covalent binding on a carbon electrode, responding to an electric potential applied to a dual-active copper catalyst.
- 14 July 2016
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 52 (69) , 10486-10489
Selection of two optional covalent bonds by electric stimuli: dual catalytic switching of redox-active copper
Two types of redox functionality were selected for covalent binding on a carbon electrode, responding to an electric potential applied to a dual-active copper catalyst.