Zdeněk Adamec
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Zdeněk Adamec has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Jan Kadavý
Department of Forest Management and Applied Geoinformatics, Faculty of Forestry and Wood Technology, Mendel University in Brno, Zemědělská 3, 613 00 Brno, Czech Republic
6 shared publications - Michal Kneifl
Mendel University in Brno
6 shared publications - Robert Knott
Department of Silviculture Faculty of Forestry and Wood Technology Mendel University in Brno Brno Czech Republic
6 shared publications - Karel Drápela
Department of Forest Management and Applied Geoinformatics, Faculty of Forestry and Wood Technology, Mendel University in Brno, Zemědělská 1, 613 00 Brno, Czech Republic
5 shared publications - Antonín Martiník
Department of Silviculture Faculty of Forestry and Wood Technology Mendel University in Brno Brno Czech Republic
3 shared publications - Jakub Drimaj
Department of Forest Protection and Wildlife Management, Mendel University in Brno, Zemědělská 3, 613 00 Brno, Czech Republic
3 shared publications
Latest Publications
- Open Access
- 19 September 2024
- Published by Czech Academy of Agricultural Sciences in Journal of Forest Science
- Vol. 70 (9) , 492-500
Preliminary results from simultaneous planting of Fagus sylvatica and pioneer species on calamity clearings
We?compared the biological and economic effects of?simultaneous artificial regeneration of?mixtures of?pioneers (birch –?Betula pendula Roth or?aspen – Populus tremula L.) and beech (Fagus sylvatica L.) with plots of?monospecific b...
- 19 September 2024
- Published by Czech Academy of Agricultural Sciences in Journal of Forest Science
- Vol. 70 (9) , 492-500
Open AccessPreliminary results from simultaneous planting of Fagus sylvatica and pioneer species on calamity clearings
We?compared the biological and economic effects of?simultaneous artificial regeneration of?mixtures of?pioneers (birch –?Betula pendula Roth or?aspen – Populus tremula L.) and beech (Fagus sylvatica L.) with plots of?monospecific b...
- Open Access
- 28 February 2024
- Published by Czech Academy of Agricultural Sciences in Journal of Forest Science
- Vol. 70 (2) , 64-78
Comparison of growth, structure and production in stands of naturally regenerated Betula pendula and Populus tremula
In Central Europe, the most important pioneer species are silver birch and European aspen. Changes in disturbance regime and an economic interest for this species have led to studies on this species and stands. Two naturally regenerated dense stands of birch (Betula pendula Roth-silver birch monoculture) and aspen (Populus tremula L.-European aspen monoculture) were selected from a Querceto-Fagetum mesotrophicum site to observe responses under the same conditions in Central Europe. Both stands regenerated after the allochthonous Norway spruce stands dieback at the site in 1999. Within a 10 m × 25 m transect established in both stands, the diameter at breast height (DBH) of all the trees was measured between 2015 and 2020. In addition, the height and position were recorded for all trees, and sample trees of both species were felled for biomass measurement. A higher volume production of aspen at the beginning (107.48/96.80 m 3) and at the end of the experiment (178.32/143.08 m 3) was accompanied with a lower above-ground wood biomass (WAB). The WAB of birch increased from 81.9 t•ha-1 to 103.3 t•ha-1 and aspen allocated 79.5 t•ha-1 to 94.8 t•ha-1 of biomass. The current annual increment of biomass for these stands was 4.3 t•ha-1 and 3.1 t•ha-1 in the age range of 17 to 22 years. The culmination of the volume increment has not yet occurred in any of the stands, but the mean annual increment of wood biomass has already been reached for both stands. Furthermore, the aspen stand tended to be more dynamic in terms of biomass allocation and mortality. Also, the lower self-tolerance of aspen confirmed our hypothesis: the two native pioneer species differ in their social behaviour within monospecific stands.
- 28 February 2024
- Published by Czech Academy of Agricultural Sciences in Journal of Forest Science
- Vol. 70 (2) , 64-78
Open AccessComparison of growth, structure and production in stands of naturally regenerated Betula pendula and Populus tremula
In Central Europe, the most important pioneer species are silver birch and European aspen. Changes in disturbance regime and an economic interest for this species have led to studies on this species and stands. Two naturally regenerated dense stands of birch (Betula pendula Roth-silver birch monoculture) and aspen (Populus tremula L.-European aspen monoculture) were selected from a Querceto-Fagetum mesotrophicum site to observe responses under the same conditions in Central Europe. Both stands regenerated after the allochthonous Norway spruce stands dieback at the site in 1999. Within a 10 m × 25 m transect established in both stands, the diameter at breast height (DBH) of all the trees was measured between 2015 and 2020. In addition, the height and position were recorded for all trees, and sample trees of both species were felled for biomass measurement. A higher volume production of aspen at the beginning (107.48/96.80 m 3) and at the end of the experiment (178.32/143.08 m 3) was accompanied with a lower above-ground wood biomass (WAB). The WAB of birch increased from 81.9 t•ha-1 to 103.3 t•ha-1 and aspen allocated 79.5 t•ha-1 to 94.8 t•ha-1 of biomass. The current annual increment of biomass for these stands was 4.3 t•ha-1 and 3.1 t•ha-1 in the age range of 17 to 22 years. The culmination of the volume increment has not yet occurred in any of the stands, but the mean annual increment of wood biomass has already been reached for both stands. Furthermore, the aspen stand tended to be more dynamic in terms of biomass allocation and mortality. Also, the lower self-tolerance of aspen confirmed our hypothesis: the two native pioneer species differ in their social behaviour within monospecific stands.
- Open Access
- 2 June 2023
- Published by MDPI AG in Agriculture
- Vol. 13 (6) , 1184
Comparison of Methods for Estimating Damage by Wild Ungulates on Field Crops
High numbers of large ungulates are locally accompanied by high levels of damage to field crops, causing economic losses and increased costs for the protection of agricultural fields. Quantifying the levels of damage can be problematic, with the degree of accuracy depending on the method used. The aim of this study was to compare the accuracy, workload and cost of four methods commonly used for estimating damage to wheat fields caused by large ungulates (esp. wild boar) in the Czech Republic. The results suggest that the manual processing of aerial photographs (“Uncrewed Aerial Systems [UAS] with Operator Delineation Method”) was very laborious and the least accurate method, with a high risk of error. In comparison, the automatic evaluation of aerial images (“UAS Crop Height Method”) and the “Ground-Based Assessment” both provided similar results when carefully analyzed and were equally demanding. The “Yield Method”, comparing the net yield from damaged and undamaged areas, provided the same result of assessment and was the least laborious, although it does require the existence of comparable areas and for the conditions to be created in advance before the method is used. Equivalent results were achieved by the UAS Crop Height Method, which we recommend using in cases where the Yield Method cannot be applied.
- 2 June 2023
- Published by MDPI AG in Agriculture
- Vol. 13 (6) , 1184
Open AccessComparison of Methods for Estimating Damage by Wild Ungulates on Field Crops
High numbers of large ungulates are locally accompanied by high levels of damage to field crops, causing economic losses and increased costs for the protection of agricultural fields. Quantifying the levels of damage can be problematic, with the degree of accuracy depending on the method used. The aim of this study was to compare the accuracy, workload and cost of four methods commonly used for estimating damage to wheat fields caused by large ungulates (esp. wild boar) in the Czech Republic. The results suggest that the manual processing of aerial photographs (“Uncrewed Aerial Systems [UAS] with Operator Delineation Method”) was very laborious and the least accurate method, with a high risk of error. In comparison, the automatic evaluation of aerial images (“UAS Crop Height Method”) and the “Ground-Based Assessment” both provided similar results when carefully analyzed and were equally demanding. The “Yield Method”, comparing the net yield from damaged and undamaged areas, provided the same result of assessment and was the least laborious, although it does require the existence of comparable areas and for the conditions to be created in advance before the method is used. Equivalent results were achieved by the UAS Crop Height Method, which we recommend using in cases where the Yield Method cannot be applied.
- Open Access
The Soil Environment of Abandoned Charcoal Kiln Platforms in a Low-Altitude Central European Forest
This study examines the soil environment of eight charcoal kiln platforms and the neighboring soil in Czech and Bohemian low-altitude forest stands. Both mixed and undisturbed soil samples were used to assess the hydrophysical soil properties, nutrient content, cation exchange capacity, enzyme activity, and soil active carbon content, while soil color, stoniness, root density, and horizon thickness were estimated in the field. Charcoal-rich horizons had high total organic carbon concentrations and total nitrogen content (about 150% and 40% higher than in the organomineral horizons of the control plot, respectively), with total carbon stocks being higher than those in neighboring forest soils. Fine root density was highest in the charcoal-rich horizons, encouraged by high soil porosity, aeration, and favorable chemical properties. Enzyme group activity differed between individual soil horizons and kiln and control plots, with depolymerization enzyme activity highest in charcoal-rich horizons and humification enzyme activity highest in mineral horizons. Phosphatase, chitinase, and phenoloxidase activity were highest in charcoal-rich horizons, while β-glucosidase activity remained similar across horizons. After long-term abandonment, kiln sites shift from inhospitable sites to localized hotspots for plant and microbial growth, having more favorable physical, enzymatic, and chemical soil properties than the surrounding areas. This study confirmed that kiln production platforms act as microhabitat hotspots, also providing information on a wide spectrum of soil properties linked with soil microorganisms and root growth.
Open AccessThe Soil Environment of Abandoned Charcoal Kiln Platforms in a Low-Altitude Central European Forest
This study examines the soil environment of eight charcoal kiln platforms and the neighboring soil in Czech and Bohemian low-altitude forest stands. Both mixed and undisturbed soil samples were used to assess the hydrophysical soil properties, nutrient content, cation exchange capacity, enzyme activity, and soil active carbon content, while soil color, stoniness, root density, and horizon thickness were estimated in the field. Charcoal-rich horizons had high total organic carbon concentrations and total nitrogen content (about 150% and 40% higher than in the organomineral horizons of the control plot, respectively), with total carbon stocks being higher than those in neighboring forest soils. Fine root density was highest in the charcoal-rich horizons, encouraged by high soil porosity, aeration, and favorable chemical properties. Enzyme group activity differed between individual soil horizons and kiln and control plots, with depolymerization enzyme activity highest in charcoal-rich horizons and humification enzyme activity highest in mineral horizons. Phosphatase, chitinase, and phenoloxidase activity were highest in charcoal-rich horizons, while β-glucosidase activity remained similar across horizons. After long-term abandonment, kiln sites shift from inhospitable sites to localized hotspots for plant and microbial growth, having more favorable physical, enzymatic, and chemical soil properties than the surrounding areas. This study confirmed that kiln production platforms act as microhabitat hotspots, also providing information on a wide spectrum of soil properties linked with soil microorganisms and root growth.
- Open Access
Evaluation of Different Calibration Approaches for Merchantable Volume Predictions of Norway Spruce Using Nonlinear Mixed Effects Model
Research Highlights: Determination of merchantable wood volume is one of the key preconditions for sustainable forest management. This study explores accuracy of calibrated predictions of merchantable wood volume of Norway spruce (Picea abies (L.) H. Karst.) using stem taper curves (STC) in a form of a mixed model. Background and Objectives: The study is devoted to the determination of merchantable wood volume (over bark) of individual standing stems based on the integration of an STC model calibrated using upper diameter measurements. Various options of upper diameter measurement were tested and their impact on the accuracy of merchantable wood volume prediction was evaluated. Materials and Methods: To model stem taper curves, a Kozak 02 function was applied in a form of a nonlinear, mixed effects model. Accuracies of calibrated merchantable wood volume predictions obtained through remote (optical) upper diameter measurements were compared to accuracies corresponding to contact measurements by a caliper. The performance of two alternative methods used in the Czech National Forest Inventory (NFI) and forestry practice, involving diameter at breast height and total tree height as the only predictors, were also tested. The contact measurements were performed at identical stem positions after felling the respective sample tree. The calibration was done in order to account for factors inherent in particular location, and, optionally, also in a particular sample stem (within the respective location). Input data was sourced as part of a dedicated survey involving the entire territory of the Czech Republic. In total, 716 individual spruce trees were measured, felled and analysed at 169 locations. Results: In general, the best merchantable volume predictions were obtained by integrating the STC fitted (and calibrated) by minimising errors of stem cross-sectional areas instead of diameters. In terms of calibrated predictions, using single-directional, caliper measurement of upper diameter at 7 m (after felling) led to the best accuracy. In this case, the observed mean bias of merchantable volume prediction was only 0.63%, indicating underestimation. The best optical calibration strategy involved upper diameter measurements at two heights (5 and 7 m) simultaneously. Bias of this volume prediction approach was estimated at 2.1%, indicating underestimation. Conclusions: Concerning the prediction of merchantable stem volume of standing Norway spruce trees, STC calibration using two optical upper diameter measurements (at 5 and 7 m) was found to be practically applicable, provided a bias up to 3.7% can be accepted. This method was found to be more accurate than the existing national alternatives using diameter at breast height and the total tree height as the only predictors.
Open AccessEvaluation of Different Calibration Approaches for Merchantable Volume Predictions of Norway Spruce Using Nonlinear Mixed Effects Model
Research Highlights: Determination of merchantable wood volume is one of the key preconditions for sustainable forest management. This study explores accuracy of calibrated predictions of merchantable wood volume of Norway spruce (Picea abies (L.) H. Karst.) using stem taper curves (STC) in a form of a mixed model. Background and Objectives: The study is devoted to the determination of merchantable wood volume (over bark) of individual standing stems based on the integration of an STC model calibrated using upper diameter measurements. Various options of upper diameter measurement were tested and their impact on the accuracy of merchantable wood volume prediction was evaluated. Materials and Methods: To model stem taper curves, a Kozak 02 function was applied in a form of a nonlinear, mixed effects model. Accuracies of calibrated merchantable wood volume predictions obtained through remote (optical) upper diameter measurements were compared to accuracies corresponding to contact measurements by a caliper. The performance of two alternative methods used in the Czech National Forest Inventory (NFI) and forestry practice, involving diameter at breast height and total tree height as the only predictors, were also tested. The contact measurements were performed at identical stem positions after felling the respective sample tree. The calibration was done in order to account for factors inherent in particular location, and, optionally, also in a particular sample stem (within the respective location). Input data was sourced as part of a dedicated survey involving the entire territory of the Czech Republic. In total, 716 individual spruce trees were measured, felled and analysed at 169 locations. Results: In general, the best merchantable volume predictions were obtained by integrating the STC fitted (and calibrated) by minimising errors of stem cross-sectional areas instead of diameters. In terms of calibrated predictions, using single-directional, caliper measurement of upper diameter at 7 m (after felling) led to the best accuracy. In this case, the observed mean bias of merchantable volume prediction was only 0.63%, indicating underestimation. The best optical calibration strategy involved upper diameter measurements at two heights (5 and 7 m) simultaneously. Bias of this volume prediction approach was estimated at 2.1%, indicating underestimation. Conclusions: Concerning the prediction of merchantable stem volume of standing Norway spruce trees, STC calibration using two optical upper diameter measurements (at 5 and 7 m) was found to be practically applicable, provided a bias up to 3.7% can be accepted. This method was found to be more accurate than the existing national alternatives using diameter at breast height and the total tree height as the only predictors.
- Open Access
Development of Sessile Oak and European Hornbeam Sprouts after Thinning
We observed the growth of juvenile sprouts at stool level in an oak-hornbeam selective coppice after selective thinning. We tested the relations of sprouting probability, number and height of new sprouts, and stool biometric characteristics with thinning intensity and light conditions. We compared the results between the two species. The sprouting probability, number of new sprouts, and height of new sprouts were modelled using different types of regression (logistic, generalized linear, and multiple linear regression) evaluated from 84 sessile oak (Quercus petraea Matt. Liebl.) and 139 European hornbeam (Carpinus betulus L.) stools with the same site conditions. There were no significant relations between sprouting probability and the tested parameters because nearly all stools re-sprouted. The growth (number and height) of new sprouts depended on the stool basal area before thinning and on thinning intensity. Light conditions (indirect site factor) only influenced the number of new European hornbeam sprouts in 2016 and the height of new sessile oak sprouts. The number of new sprouts in European hornbeam was higher than in sessile oak.
Open AccessDevelopment of Sessile Oak and European Hornbeam Sprouts after Thinning
We observed the growth of juvenile sprouts at stool level in an oak-hornbeam selective coppice after selective thinning. We tested the relations of sprouting probability, number and height of new sprouts, and stool biometric characteristics with thinning intensity and light conditions. We compared the results between the two species. The sprouting probability, number of new sprouts, and height of new sprouts were modelled using different types of regression (logistic, generalized linear, and multiple linear regression) evaluated from 84 sessile oak (Quercus petraea Matt. Liebl.) and 139 European hornbeam (Carpinus betulus L.) stools with the same site conditions. There were no significant relations between sprouting probability and the tested parameters because nearly all stools re-sprouted. The growth (number and height) of new sprouts depended on the stool basal area before thinning and on thinning intensity. Light conditions (indirect site factor) only influenced the number of new European hornbeam sprouts in 2016 and the height of new sessile oak sprouts. The number of new sprouts in European hornbeam was higher than in sessile oak.
- Open Access
- 28 February 2017
- Published by Italian Society of Sivilculture and Forest Ecology (SISEF) in iForest - Biogeosciences and Forestry
- Vol. 10 (1) , 1-8
Comparison of parametric and nonparametric methods for modeling height-diameter relationships
This paper focuses on the problem of regionalization of the height-diameter model at the stand level. To this purpose, we selected two different modeling techniques. As a parametric method, we chose a linear mixed effects model (LME) with calibrated conditional prediction, whose calibration was carried out on randomly selected trees either close to mean diameter or within three diameter intervals throughout the diameter range. As a nonparametric method, the technique of classification and regression trees (CART) was chosen. These two methods were also compared with the local model created by ordinary least squares regression. The results show that LME with calibrated conditional prediction based on measurements of height at three diameter intervals provided results very close to the local model, especially when six to nine trees are measured. We recommend this technique for the regionalization of the global model. The CART method provided worse results than LME, with the exception of parameters of the residual distribution. Nevertheless, the latter approach is very user-friendly, as the regression tree creation and especially its interpretation are relatively simple, and could be recommended when larger deviations are allowed.
- 28 February 2017
- Published by Italian Society of Sivilculture and Forest Ecology (SISEF) in iForest - Biogeosciences and Forestry
- Vol. 10 (1) , 1-8
Open AccessComparison of parametric and nonparametric methods for modeling height-diameter relationships
This paper focuses on the problem of regionalization of the height-diameter model at the stand level. To this purpose, we selected two different modeling techniques. As a parametric method, we chose a linear mixed effects model (LME) with calibrated conditional prediction, whose calibration was carried out on randomly selected trees either close to mean diameter or within three diameter intervals throughout the diameter range. As a nonparametric method, the technique of classification and regression trees (CART) was chosen. These two methods were also compared with the local model created by ordinary least squares regression. The results show that LME with calibrated conditional prediction based on measurements of height at three diameter intervals provided results very close to the local model, especially when six to nine trees are measured. We recommend this technique for the regionalization of the global model. The CART method provided worse results than LME, with the exception of parameters of the residual distribution. Nevertheless, the latter approach is very user-friendly, as the regression tree creation and especially its interpretation are relatively simple, and could be recommended when larger deviations are allowed.
- Open Access
- 31 January 2017
- Published by Czech Academy of Agricultural Sciences in Journal of Forest Science
- Vol. 63 (1) , 34-44
Production and soil restoration effect of pioneer tree species in a region of allochthonous Norway spruce dieback
» Articles | Agricultural Journals
- 31 January 2017
- Published by Czech Academy of Agricultural Sciences in Journal of Forest Science
- Vol. 63 (1) , 34-44
Open AccessProduction and soil restoration effect of pioneer tree species in a region of allochthonous Norway spruce dieback
» Articles | Agricultural Journals
- Open Access
- 9 August 2016
- Published by Italian Society of Sivilculture and Forest Ecology (SISEF) in iForest - Biogeosciences and Forestry
- Vol. 9 (4) , 569-576
The impact of seed predation and browsing on natural sessile oak regeneration under different light conditions in an over-aged coppice stand
Sessile oak (Quercus petraea (Matt.) Liebl.) is one of the most important commercial species cultivated at low altitudes in the Czech Republic, and over-aged coppices are a significant part of oak stands in the region. In order to secure a high-valuable timber production (e.g., through conversion of such stands into coppices-with-standards), knowledge of the potential and limits of generative regeneration is essential. This study was conducted in three oak-dominated over-aged coppice stands in different stages of conversion into coppices-with-standards and characterized by different basal area (BA, from 9.3 to 14.1 m2 ha-1) and relative diffuse radiation (ISF, from 12.1 to 35.5%). The study stands were compared with respect to seed predation following acorn fall and oak regeneration parameters. At the time of their fall the acorns represented a sought-after source of food for large mammals (particularly wild boar). At the end of acorn fall, 13-67% acorns were lost due to animal predation. A control evaluation conducted the following spring revealed a decrease of 92-97% in fallen acorns. Despite the major animal impact, a high reserve of acorns and saplings remained in the stands (4 600-29 000 acorns and 66 000-310 000 saplings per ha). With increasing light intensity the oak regeneration density decreased, while the height and age variability of oak regeneration increased. Although saplings were capable of surviving several years under unfavorable light conditions (even below 12% ISF), they require a minimum of 20% ISF (i.e., BA < 16 m2 ha-1) to achieve sustainable height increment. Based on our results, for conversion of such stands into coppices-with-standards we recommend a maximum of 200 reserved trees (BA = 16 m2 ha-1) to achieve successful height growth of the understorey.
- 9 August 2016
- Published by Italian Society of Sivilculture and Forest Ecology (SISEF) in iForest - Biogeosciences and Forestry
- Vol. 9 (4) , 569-576
Open AccessThe impact of seed predation and browsing on natural sessile oak regeneration under different light conditions in an over-aged coppice stand
Sessile oak (Quercus petraea (Matt.) Liebl.) is one of the most important commercial species cultivated at low altitudes in the Czech Republic, and over-aged coppices are a significant part of oak stands in the region. In order to secure a high-valuable timber production (e.g., through conversion of such stands into coppices-with-standards), knowledge of the potential and limits of generative regeneration is essential. This study was conducted in three oak-dominated over-aged coppice stands in different stages of conversion into coppices-with-standards and characterized by different basal area (BA, from 9.3 to 14.1 m2 ha-1) and relative diffuse radiation (ISF, from 12.1 to 35.5%). The study stands were compared with respect to seed predation following acorn fall and oak regeneration parameters. At the time of their fall the acorns represented a sought-after source of food for large mammals (particularly wild boar). At the end of acorn fall, 13-67% acorns were lost due to animal predation. A control evaluation conducted the following spring revealed a decrease of 92-97% in fallen acorns. Despite the major animal impact, a high reserve of acorns and saplings remained in the stands (4 600-29 000 acorns and 66 000-310 000 saplings per ha). With increasing light intensity the oak regeneration density decreased, while the height and age variability of oak regeneration increased. Although saplings were capable of surviving several years under unfavorable light conditions (even below 12% ISF), they require a minimum of 20% ISF (i.e., BA < 16 m2 ha-1) to achieve sustainable height increment. Based on our results, for conversion of such stands into coppices-with-standards we recommend a maximum of 200 reserved trees (BA = 16 m2 ha-1) to achieve successful height growth of the understorey.
- Open Access
- 31 May 2016
- Published by Czech Academy of Agricultural Sciences in Journal of Forest Science
- Vol. 62 (5) , 229-235
Response of diameter and height increment to thinning in oak-hornbeam coppice in the southeastern part of the Czech Republic
Open Access Agricultural Journals published by Institute of Agricultural Economics and Information
- 31 May 2016
- Published by Czech Academy of Agricultural Sciences in Journal of Forest Science
- Vol. 62 (5) , 229-235
Open AccessResponse of diameter and height increment to thinning in oak-hornbeam coppice in the southeastern part of the Czech Republic
Open Access Agricultural Journals published by Institute of Agricultural Economics and Information