Zhiping Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Zhiping Chen has a total of 82 co-authors. Here are the top co-authors by number of shared publications:
- Peng Jiao
Institute of Advanced Equipment College of Energy Engineering Zhejiang University Hangzhou Zhejiang China
11 shared publications He Ma
5 shared publicationsPeng Jiao
5 shared publicationsYanan Gu
College of Energy Engineering, Zhejiang University, Hangzhou, PR China
5 shared publicationsSong Huang
4 shared publicationsHao Miao
3 shared publications
Latest Publications
- 31 January 2026
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 148 (3)
Physics-Informed One-Dimensional Convolutional Neural Networks Framework for Predicting Buckling Load of Spherical Shells Under External Pressure Based on Energy Barrier Method
In ocean engineering, spherical shells often serve as common pressure vessels. Under external pressure, these shells tend to suffer from buckling damage. To ensure the stability of spherical shells and optimize their structural design, it is necessary to predict their buckling load under external pressure. However, current predictions based on the knockdown factors are relatively conservative, and predictions based on common machine learning methods lack physical orientation. Based on the energy barrier method, a physics-informed one-dimensional-convolutional neural networks (1D-CNN) model is proposed to address this problem. These newly developed physics-informed features and loss functions improve the accuracy of the model. Both metallic and nonmetallic spherical shells datasets are used to establish the models. Then, we determine the optimal hyperparameters using K-fold cross-validation and the optuna optimization framework and compare their predictive performance against models like decision trees (DT), random forests (RF), and artificial neural networks (ANN). The results indicate that our model outperforms the others in predictive accuracy. Additionally, the potential of the model, guided by the energy barrier method, is demonstrated by comparing various loss functions. For the actual spherical shell, the trained model can be used for buckling analysis and the optimized design of spherical shells in engineering practice.
- 31 January 2026
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 148 (3)
Physics-Informed One-Dimensional Convolutional Neural Networks Framework for Predicting Buckling Load of Spherical Shells Under External Pressure Based on Energy Barrier Method
In ocean engineering, spherical shells often serve as common pressure vessels. Under external pressure, these shells tend to suffer from buckling damage. To ensure the stability of spherical shells and optimize their structural design, it is necessary to predict their buckling load under external pressure. However, current predictions based on the knockdown factors are relatively conservative, and predictions based on common machine learning methods lack physical orientation. Based on the energy barrier method, a physics-informed one-dimensional-convolutional neural networks (1D-CNN) model is proposed to address this problem. These newly developed physics-informed features and loss functions improve the accuracy of the model. Both metallic and nonmetallic spherical shells datasets are used to establish the models. Then, we determine the optimal hyperparameters using K-fold cross-validation and the optuna optimization framework and compare their predictive performance against models like decision trees (DT), random forests (RF), and artificial neural networks (ANN). The results indicate that our model outperforms the others in predictive accuracy. Additionally, the potential of the model, guided by the energy barrier method, is demonstrated by comparing various loss functions. For the actual spherical shell, the trained model can be used for buckling analysis and the optimized design of spherical shells in engineering practice.
- 24 December 2025
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 148 (2)
Seismic Safety Analysis of Double-Steel-Wall Full-Containment Liquefied Natural Gas Storage Tanks Under Service and Leakage Conditions
The seismic resilience of liquefied natural gas (LNG) storage tanks is critical for public safety and economic stability. This study accesses the safety of a 30,000 m3 double-steel-wall full-containment LNG storage tank under seismic and leakage conditions, employing the two-way fluid–structure interaction and added mass methods to analyze the seismic time history response and evaluate the tank's seismic load resistance throughout its lifespan. The results showed that sloshing height, stress, and displacement responses of the storage tank remained within safe limits under seismic loading. The fluid's impact on the inner tank wall was most significant at the bottom, where axial stress increased the most. Under the combined effects of leakage and aftershock, hydrodynamic pressure notably affected the middle and lower sections of the outer tank wall, increasing the displacement gradient along the tank's height and raising the risk of elephant's foot buckling at around 1/10 of the wall height. After leakage from the inner tank, hydrostatic pressure from the leaking liquid caused a substantial increase in stress, especially in the circumferential direction.
- 24 December 2025
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 148 (2)
Seismic Safety Analysis of Double-Steel-Wall Full-Containment Liquefied Natural Gas Storage Tanks Under Service and Leakage Conditions
The seismic resilience of liquefied natural gas (LNG) storage tanks is critical for public safety and economic stability. This study accesses the safety of a 30,000 m3 double-steel-wall full-containment LNG storage tank under seismic and leakage conditions, employing the two-way fluid–structure interaction and added mass methods to analyze the seismic time history response and evaluate the tank's seismic load resistance throughout its lifespan. The results showed that sloshing height, stress, and displacement responses of the storage tank remained within safe limits under seismic loading. The fluid's impact on the inner tank wall was most significant at the bottom, where axial stress increased the most. Under the combined effects of leakage and aftershock, hydrodynamic pressure notably affected the middle and lower sections of the outer tank wall, increasing the displacement gradient along the tank's height and raising the risk of elephant's foot buckling at around 1/10 of the wall height. After leakage from the inner tank, hydrostatic pressure from the leaking liquid caused a substantial increase in stress, especially in the circumferential direction.
- 30 October 2025
- Published by Elsevier in Engineering Structures
- Vol. 346
Shaping order from disorder: Entropy-reduction strategy for tailoring mechanical properties in non-periodic metastructures
- 30 October 2025
- Published by Elsevier in Engineering Structures
- Vol. 346
Shaping order from disorder: Entropy-reduction strategy for tailoring mechanical properties in non-periodic metastructures
- 5 May 2025
- Published by Elsevier in Thin-Walled Structures
- Vol. 214
Quasi-isotropy in non-periodic metastructures and topological solution for directional freedom
- 5 May 2025
- Published by Elsevier in Thin-Walled Structures
- Vol. 214
Quasi-isotropy in non-periodic metastructures and topological solution for directional freedom
- 20 February 2025
- Published by Elsevier in International Journal of Pressure Vessels and Piping
- Vol. 216
A TSC model for pipelines girth weld considering variations in toughness across different regions
- 20 February 2025
- Published by Elsevier in International Journal of Pressure Vessels and Piping
- Vol. 216
A TSC model for pipelines girth weld considering variations in toughness across different regions
- Open Access
Localized Perturbation Load Approach for Buckling Design of Thin-Walled Steel Cylindrical Shells under Partial Axial Compression
A thin-walled steel cylindrical shell is a common engineering structure that has an efficient load-carrying capacity. This structure is more easily subjected to partial axial compression loads in application, and buckling is the main failure mode. However, there are few available design methods for partial axially compressed steel cylindrical shells. Motivated by this, a design method called the localized perturbation load approach (LPLA) is proposed in this paper. The finite element framework for the application of LPLA is established. The location and number of perturbation loads are determined by considering the imperfection sensitivity and the buckling failure mode of partial axial compressed cylinders. A series of buckling experiments are carried out to validate the LPLA method. In addition, the reliability of LPLA for the design of cylindrical shells with different imperfection locations and dimensions is also verified. The results show that LPLA can give conservative and reliable lower-bound buckling loads. Therefore, LPLA can be used as a design method for thin-walled steel cylindrical shell structures under partial axial compression in actual engineering.
Open AccessLocalized Perturbation Load Approach for Buckling Design of Thin-Walled Steel Cylindrical Shells under Partial Axial Compression
A thin-walled steel cylindrical shell is a common engineering structure that has an efficient load-carrying capacity. This structure is more easily subjected to partial axial compression loads in application, and buckling is the main failure mode. However, there are few available design methods for partial axially compressed steel cylindrical shells. Motivated by this, a design method called the localized perturbation load approach (LPLA) is proposed in this paper. The finite element framework for the application of LPLA is established. The location and number of perturbation loads are determined by considering the imperfection sensitivity and the buckling failure mode of partial axial compressed cylinders. A series of buckling experiments are carried out to validate the LPLA method. In addition, the reliability of LPLA for the design of cylindrical shells with different imperfection locations and dimensions is also verified. The results show that LPLA can give conservative and reliable lower-bound buckling loads. Therefore, LPLA can be used as a design method for thin-walled steel cylindrical shell structures under partial axial compression in actual engineering.
- 11 February 2023
- Published by Springer Nature in Journal of Materials Science
- Vol. 58 (8) , 3802-3824
Revealing influence of warm bending on creep performance of heat-resistant 2.25Cr-1Mo-0.25 V steel
- 11 February 2023
- Published by Springer Nature in Journal of Materials Science
- Vol. 58 (8) , 3802-3824
Revealing influence of warm bending on creep performance of heat-resistant 2.25Cr-1Mo-0.25 V steel
- 9 September 2022
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 31 (3) , 693-712
Post-buckling behavior of rectangular multilayer FG-GPLRC plate with initial geometric defects subjected to non-uniform in-plane compression loads in thermal environment
A semi-analytical method is established to investigate post-buckling behavior of functionally graded graphene platelets reinforced composite (FG-GPLRC) plate with initial geometric defects under non-uniform in-plane compression loads. Buckling governing equations are derived base on a new unified framework of transverse shear deformation plate theory, and the reliability and accuracy of proposed method are validated. Parametric studies are systematically performed for the first time to elaborate the effects of GPLs, structural characteristics, initial geometric defects, loading cases and thermal environment on post-buckling behavior of FG-GPLRC plate. This article can provide theoretical guidance for the design and optimization of FG-GPLRC plate.
- 9 September 2022
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 31 (3) , 693-712
Post-buckling behavior of rectangular multilayer FG-GPLRC plate with initial geometric defects subjected to non-uniform in-plane compression loads in thermal environment
A semi-analytical method is established to investigate post-buckling behavior of functionally graded graphene platelets reinforced composite (FG-GPLRC) plate with initial geometric defects under non-uniform in-plane compression loads. Buckling governing equations are derived base on a new unified framework of transverse shear deformation plate theory, and the reliability and accuracy of proposed method are validated. Parametric studies are systematically performed for the first time to elaborate the effects of GPLs, structural characteristics, initial geometric defects, loading cases and thermal environment on post-buckling behavior of FG-GPLRC plate. This article can provide theoretical guidance for the design and optimization of FG-GPLRC plate.