Wankei Wan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Wankei Wan has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
Kenneth Kar Ho Wong
Department of Medical Biophysics, The University of Western Ontario, London, ON, Canada N6A 5B9
2 shared publicationsLeonardo E. Millon
Axcelon Biopolymers Corporation, London, Ontario, Canada
2 shared publicationsAmanda M. Hamilton
Department of Anatomy and Cell Biology, The University of Western Ontario, London, Ontario N6A 5B9, Canada
1 shared publicationChristine J. Oates
Fordham Center for Biomedical Engineering, Department of Chemical and Biochemical Engineering, University of Western Ontario, London, Ontario, Canada N6A 5B9
1 shared publicationDarcy P. Small
Department of Chemical and Biochemical Engineering, University of Western Ontario, London, ON, Canada
1 shared publicationDavid B. O'GOrman
Cell and Molecular Biology Laboratory, Hand and Upper Limb Centre, Lawson Health Research Institute, London, ON, Canada N6A 5B9; Department of Surgery, The University of Western Ontario, London, ON, Canada N6A 5B9; Department of Biochemistry, The University of Western Ontario, London, ON, Canada N6A 5B9
1 shared publication
Latest Publications
- 13 October 2011
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 100B (1) , 1-10
Exploring cell compatibility of a fibronectin‐functionalized physically crosslinked poly(vinyl alcohol) hydrogel
Physically crosslinked poly(vinyl alcohol) (PVA) hydrogels prepared using a low‐temperature thermally cycled process have tunable mechanical properties that fall within the range of soft tissues, including cardiovascular tissue. An approach to render it hemocompatible is by endothelization, but its hydrophilic nature is not conducive to cell adhesion and spreading. We investigated the functionalization reaction of this class of PVA hydrogel with fibronectin (FN) for adhesion and spreading of primary porcine radial artery cells and vascular endothelial cells. These are cells relevant to small‐diameter vascular graft development. FN functionalization was achieved using a multistep reaction, but the activation step involving carbonyl diimidazole normally required for chemically crosslinked PVA was found to be unnecessary. The reaction resulted in an increase in the elastic modulus of the PVA hydrogel but is still well within the range of cardiovascular tissue. Confocal microscopy confirmed the adhesion and spreading of both cell types on the PVA–FN surfaces, whereas cells failed to adhere to the PVA control. This is a first step toward an alternative for the realization of a synthetic replacement small‐diameter vascular graft. © 2011 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2012.
- 13 October 2011
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 100B (1) , 1-10
Exploring cell compatibility of a fibronectin‐functionalized physically crosslinked poly(vinyl alcohol) hydrogel
Physically crosslinked poly(vinyl alcohol) (PVA) hydrogels prepared using a low‐temperature thermally cycled process have tunable mechanical properties that fall within the range of soft tissues, including cardiovascular tissue. An approach to render it hemocompatible is by endothelization, but its hydrophilic nature is not conducive to cell adhesion and spreading. We investigated the functionalization reaction of this class of PVA hydrogel with fibronectin (FN) for adhesion and spreading of primary porcine radial artery cells and vascular endothelial cells. These are cells relevant to small‐diameter vascular graft development. FN functionalization was achieved using a multistep reaction, but the activation step involving carbonyl diimidazole normally required for chemically crosslinked PVA was found to be unnecessary. The reaction resulted in an increase in the elastic modulus of the PVA hydrogel but is still well within the range of cardiovascular tissue. Confocal microscopy confirmed the adhesion and spreading of both cell types on the PVA–FN surfaces, whereas cells failed to adhere to the PVA control. This is a first step toward an alternative for the realization of a synthetic replacement small‐diameter vascular graft. © 2011 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2012.
- 27 September 2011
- Published by Wiley in Bioelectromagnetics
- Vol. 33 (4) , 298-308
Effect of static magnetic fields on the growth, photosynthesis and ultrastructure of Chlorella kessleri microalgae
Microalgal biotechnology could generate substantial amounts of biofuels with minimal environmental impact if the economics can be improved by increasing the rate of biomass production. Chlorella kessleri was grown in a small‐scale raceway pond and in flask cultures with the entire volume, 1% (v/v) at any instant, periodically exposed to static magnetic fields to demonstrate increased biomass production and investigate physiological changes, respectively. The growth rate in flasks was maximal at a field strength of 10 mT, increasing from 0.39 ± 0.06 per day for the control to 0.88 ± 0.06 per day. In the raceway pond the 10 mT field increased the growth rate from 0.24 ± 0.03 to 0.45 ± 0.05 per day, final biomass from 0.88 ± 0.11 to 1.56 ± 0.18 g/L per day, and maximum biomass production from 0.11 ± 0.02 to 0.38 ± 0.04 g/L per day. Increased pigment, protein, Ca, and Zn content made the biomass produced with magnetic stimulation nutritionally superior. An increase in oxidative stress was measured indirectly as a decrease in antioxidant capacity from 26 ± 2 to 17 ± 1 µmol antioxidant/g biomass. Net photosynthetic capacity (NPC) and respiratory rate were increased by factors of 2.1 and 3.1, respectively. Loss of NPC enhancement after the removal of magnetic field fit a first‐order model well (R2 = 0.99) with a half‐life of 3.3 days. Transmission electron microscopy showed enlarged chloroplasts and decreased thylakoid order with 10 mT treatment. By increasing daily biomass production about fourfold, 10 mT magnetic field exposure could make algal oil cost competitive with other biodiesel feedstocks. Bioelectromagnetics 33:298–308, 2012.
- 27 September 2011
- Published by Wiley in Bioelectromagnetics
- Vol. 33 (4) , 298-308
Effect of static magnetic fields on the growth, photosynthesis and ultrastructure of Chlorella kessleri microalgae
Microalgal biotechnology could generate substantial amounts of biofuels with minimal environmental impact if the economics can be improved by increasing the rate of biomass production. Chlorella kessleri was grown in a small‐scale raceway pond and in flask cultures with the entire volume, 1% (v/v) at any instant, periodically exposed to static magnetic fields to demonstrate increased biomass production and investigate physiological changes, respectively. The growth rate in flasks was maximal at a field strength of 10 mT, increasing from 0.39 ± 0.06 per day for the control to 0.88 ± 0.06 per day. In the raceway pond the 10 mT field increased the growth rate from 0.24 ± 0.03 to 0.45 ± 0.05 per day, final biomass from 0.88 ± 0.11 to 1.56 ± 0.18 g/L per day, and maximum biomass production from 0.11 ± 0.02 to 0.38 ± 0.04 g/L per day. Increased pigment, protein, Ca, and Zn content made the biomass produced with magnetic stimulation nutritionally superior. An increase in oxidative stress was measured indirectly as a decrease in antioxidant capacity from 26 ± 2 to 17 ± 1 µmol antioxidant/g biomass. Net photosynthetic capacity (NPC) and respiratory rate were increased by factors of 2.1 and 3.1, respectively. Loss of NPC enhancement after the removal of magnetic field fit a first‐order model well (R2 = 0.99) with a half‐life of 3.3 days. Transmission electron microscopy showed enlarged chloroplasts and decreased thylakoid order with 10 mT treatment. By increasing daily biomass production about fourfold, 10 mT magnetic field exposure could make algal oil cost competitive with other biodiesel feedstocks. Bioelectromagnetics 33:298–308, 2012.
- 1 January 2011
- Published by Taylor & Francis in Journal of Biomaterials Science, Polymer Edition
- Vol. 22 (17) , 2241-2259
Genipin-Cross-linked Electrospun Collagen Fibers
The fabrication of a fibrous collagen scaffold using electrospinning is desirable for tissue-engineering applications. Previously, electrospun collagen fibers were shown to be unstable in aqueous e...
- 1 January 2011
- Published by Taylor & Francis in Journal of Biomaterials Science, Polymer Edition
- Vol. 22 (17) , 2241-2259
Genipin-Cross-linked Electrospun Collagen Fibers
The fabrication of a fibrous collagen scaffold using electrospinning is desirable for tissue-engineering applications. Previously, electrospun collagen fibers were shown to be unstable in aqueous e...
- 26 January 2010
- Published by Springer Nature in Journal of Materials Science
- Vol. 45 (9) , 2456-2465
Effect of annealing on aqueous stability and elastic modulus of electrospun poly(vinyl alcohol) fibers
- 26 January 2010
- Published by Springer Nature in Journal of Materials Science
- Vol. 45 (9) , 2456-2465
Effect of annealing on aqueous stability and elastic modulus of electrospun poly(vinyl alcohol) fibers
- 9 April 2009
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 90B (2) , 922-929
Compression properties of polyvinyl alcohol – bacterial cellulose nanocomposite
Despite the established use of total joint replacement for the treatment of advanced degeneration of articular cartilage, component loosening due to wear and osteolysis limits the lifespan of these joint prostheses. In the present study, nanocomposites consisting of poly(vinyl alcohol) (PVA) and bacterial cellulose (BC) nanofibers were investigated as possible improved cartilage replacement materials. Nanocomposites were synthesized by adding small amounts (<1%) of BC to PVA, and subjecting the mixture to thermal cycling. The mechanical properties of the resulting material were evaluated using unconfined compression testing. By the addition of BC nanofibers to the PVA matrix, a nanocomposite with a wide range of compressive mechanical properties control was obtained, with elastic modulus values similar to those reported for native articular cartilage. The nanocomposite also showed improved strain‐rate dependence and adequate viscoelastic properties. The PVA–BC nanocomposite is therefore a promising biomaterial to be considered as a possible replacement material for localized articular cartilage injuries and other orthopedic applications such as intervertebral discs. © 2009 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 2009
- 9 April 2009
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 90B (2) , 922-929
Compression properties of polyvinyl alcohol – bacterial cellulose nanocomposite
Despite the established use of total joint replacement for the treatment of advanced degeneration of articular cartilage, component loosening due to wear and osteolysis limits the lifespan of these joint prostheses. In the present study, nanocomposites consisting of poly(vinyl alcohol) (PVA) and bacterial cellulose (BC) nanofibers were investigated as possible improved cartilage replacement materials. Nanocomposites were synthesized by adding small amounts (<1%) of BC to PVA, and subjecting the mixture to thermal cycling. The mechanical properties of the resulting material were evaluated using unconfined compression testing. By the addition of BC nanofibers to the PVA matrix, a nanocomposite with a wide range of compressive mechanical properties control was obtained, with elastic modulus values similar to those reported for native articular cartilage. The nanocomposite also showed improved strain‐rate dependence and adequate viscoelastic properties. The PVA–BC nanocomposite is therefore a promising biomaterial to be considered as a possible replacement material for localized articular cartilage injuries and other orthopedic applications such as intervertebral discs. © 2009 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 2009
- 23 August 2007
- Published by Taylor & Francis in Nanomedicine
- Vol. 2 (4) , 483-509
Use of Degradable and Nondegradable Nanomaterials for Controlled Release
Drug-delivery devices are fundamentally important in improving the pharmacological profiles of therapeutic molecules. Nanocontrolled-release systems are attracting a lot of attention currently owing to their large surface area and their ability to target delivery to specific sites in the human body. In addition, they can penetrate the cell membrane for gene, nucleic acid and bioactive peptide/protein delivery. Representative applications of nanodrug-delivery systems include controlled-release wound dressings, controlled-release scaffolds for tissue regeneration and implantable biodegradable nanomaterial-based medical devices integrated with drug-delivery functions. We review the present status and future perspectives of various types of nanocontrolled-release systems. Although many of the well-established degradable and nondegradable controlled-release vehicles are being investigated for their processing into nanocarriers, several new emerging nanomaterials are being studied for their controlled-release p...
- 23 August 2007
- Published by Taylor & Francis in Nanomedicine
- Vol. 2 (4) , 483-509
Use of Degradable and Nondegradable Nanomaterials for Controlled Release
Drug-delivery devices are fundamentally important in improving the pharmacological profiles of therapeutic molecules. Nanocontrolled-release systems are attracting a lot of attention currently owing to their large surface area and their ability to target delivery to specific sites in the human body. In addition, they can penetrate the cell membrane for gene, nucleic acid and bioactive peptide/protein delivery. Representative applications of nanodrug-delivery systems include controlled-release wound dressings, controlled-release scaffolds for tissue regeneration and implantable biodegradable nanomaterial-based medical devices integrated with drug-delivery functions. We review the present status and future perspectives of various types of nanocontrolled-release systems. Although many of the well-established degradable and nondegradable controlled-release vehicles are being investigated for their processing into nanocarriers, several new emerging nanomaterials are being studied for their controlled-release p...