Yoshihisa Yamamoto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yoshihisa Yamamoto has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
Tatsuo Koide
Division of Drugs, National Institute of Health Sciences
6 shared publicationsToshiro Fukami
Meiji Pharmaceutical University
5 shared publications- Toshiro Fukami
Department of Molecular Pharmaceutics, Meiji Pharmaceutical University, Kiyose, Tokyo, Japan
3 shared publications Koichi Metori
School of Pharmacy, Nihon University, Japan
2 shared publications- Mizuho Kajita
Bio & Healthcare Division, HORIBA Ltd., 2 Miyanohigashi-cho, Kisshoin, Minami-ku, Kyoto 601-8510, Japan
2 shared publications - Naoki Shimada
Department of Molecular Pharmaceutics, Meiji Pharmaceutical University, 2-522-1 Noshio, Kiyose-shi, Tokyo 204-8588, Japan
2 shared publications
Latest Publications
- Open Access
- 29 July 2023
- Published by MDPI AG in Pharmaceutics
- Vol. 15 (8) , 2041
Pharmaceutical Evaluation of Levofloxacin Orally Disintegrating Tablet Formulation Using Low Frequency Raman Spectroscopy
We evaluated the pharmaceutical properties of levofloxacin (LV) in the form of an orally disintegrating tablet (LVODT) to find a new usefulness of low frequency (LF) Raman spectroscopy. LVODT contained dispersed granules with diameters in the order of several hundred micrometers, which were composed of the active pharmaceutical ingredient (API), as confirmed by infrared (IR) microspectroscopy. On the contrary, the API and inactive pharmaceutical ingredients (non-APIs) were homogeneously distributed in LV tablet (LVT) formulations. Microscopic IR spectroscopy and thermal analyses showed that LVODT and LVT contained the API in different crystalline forms or environment around the API each other. Furthermore, powder X-ray diffraction showed that LVT contained a hemihydrate of the API, while LVODT showed a partial transition to the monohydrate form. This result was confirmed by microscopic LF Raman spectroscopy. Moreover, this method confirmed the presence of thin layers coating the outer edges of the granules that contained the API. Spectra obtained from these thin layers indicated the presence of titanium dioxide, suggesting that the layers coexisted with a polymer that masks the bitterness of API. The microscopic LF Raman spectroscopy results in this study indicated new applications of this method in pharmaceutical science.
- 29 July 2023
- Published by MDPI AG in Pharmaceutics
- Vol. 15 (8) , 2041
Open AccessPharmaceutical Evaluation of Levofloxacin Orally Disintegrating Tablet Formulation Using Low Frequency Raman Spectroscopy
We evaluated the pharmaceutical properties of levofloxacin (LV) in the form of an orally disintegrating tablet (LVODT) to find a new usefulness of low frequency (LF) Raman spectroscopy. LVODT contained dispersed granules with diameters in the order of several hundred micrometers, which were composed of the active pharmaceutical ingredient (API), as confirmed by infrared (IR) microspectroscopy. On the contrary, the API and inactive pharmaceutical ingredients (non-APIs) were homogeneously distributed in LV tablet (LVT) formulations. Microscopic IR spectroscopy and thermal analyses showed that LVODT and LVT contained the API in different crystalline forms or environment around the API each other. Furthermore, powder X-ray diffraction showed that LVT contained a hemihydrate of the API, while LVODT showed a partial transition to the monohydrate form. This result was confirmed by microscopic LF Raman spectroscopy. Moreover, this method confirmed the presence of thin layers coating the outer edges of the granules that contained the API. Spectra obtained from these thin layers indicated the presence of titanium dioxide, suggesting that the layers coexisted with a polymer that masks the bitterness of API. The microscopic LF Raman spectroscopy results in this study indicated new applications of this method in pharmaceutical science.
- Open Access
- 2 June 2023
- Published by MDPI AG in Preprints.org
Pharmaceutical Evaluation of Levofloxacin Orally Disintegrating Tablet Formulation Using Low Frequency Raman Spectroscopy
: We evaluated the pharmaceutical properties of levofloxacin (LV) in the form of an orally disintegrating tablet (LVODT) to find a new usefulness of low frequency (LF) Raman spectroscopy. LVODT contained dispersed granules with diameters in the order of several hundred micrometers, which were composed of the active pharmaceutical ingredient (API), as confirmed by infrared (IR) microspectroscopy. On the contrary, the API and inactive pharmaceutical ingredients (non-APIs) were homogeneously distributed in LV tablet (LVT) formulations. Microscopic IR spectroscopy and thermal analyses showed that LVODT and LVT contained the API in different crystalline forms or environment around the API each other. Furthermore, powder X-ray diffraction showed that LVT contained a hemihydrate of the API, while LVODT showed a partial transition to the monohydrate form. This result was confirmed by microscopic LF Raman spectroscopy. Moreover, this method confirmed the presence of thin layers coating the outer edges of the granules that contained the API. Spectra obtained from these thin layers indicated the presence of titanium dioxide, suggesting that the layers coexisted with a polymer that masks the bitterness of API. The microscopic LF Raman spectroscopy results in this study indicated new applications of this method in pharmaceutical science.
- 2 June 2023
- Published by MDPI AG in Preprints.org
Open AccessPharmaceutical Evaluation of Levofloxacin Orally Disintegrating Tablet Formulation Using Low Frequency Raman Spectroscopy
: We evaluated the pharmaceutical properties of levofloxacin (LV) in the form of an orally disintegrating tablet (LVODT) to find a new usefulness of low frequency (LF) Raman spectroscopy. LVODT contained dispersed granules with diameters in the order of several hundred micrometers, which were composed of the active pharmaceutical ingredient (API), as confirmed by infrared (IR) microspectroscopy. On the contrary, the API and inactive pharmaceutical ingredients (non-APIs) were homogeneously distributed in LV tablet (LVT) formulations. Microscopic IR spectroscopy and thermal analyses showed that LVODT and LVT contained the API in different crystalline forms or environment around the API each other. Furthermore, powder X-ray diffraction showed that LVT contained a hemihydrate of the API, while LVODT showed a partial transition to the monohydrate form. This result was confirmed by microscopic LF Raman spectroscopy. Moreover, this method confirmed the presence of thin layers coating the outer edges of the granules that contained the API. Spectra obtained from these thin layers indicated the presence of titanium dioxide, suggesting that the layers coexisted with a polymer that masks the bitterness of API. The microscopic LF Raman spectroscopy results in this study indicated new applications of this method in pharmaceutical science.
- Open Access
- 1 February 2023
- Published by Pharmaceutical Society of Japan in Chemical and Pharmaceutical Bulletin
- Vol. 71 (2) , 165-174
Quality Evaluation of Humidified Magnesium Oxide Tablet Formulations with Respect to Disintegration Time Prolongation
In the present study, we conducted a detailed evaluation of the effects of humidification on the quality of five types of commercial magnesium oxide (MgO) tablet formulations. When near-IR spectroscopy was performed, a peak derived from the first overtone of the stretching vibration of the hydroxyl group was observed at approximately 7200 cm−1 in a humidified MgO tablet formulation. To visually evaluate the effect of this humidification, a mapping image was created using microscopic IR spectroscopy. In the IR spectrum, a peak derived from the stretching vibration of the hydroxyl group appears at approximately 3700 cm−1, so we created a mapping image using the absorbance ratio of 3700 and 3400 cm−1 as an index. In the mapping image of humidified MgO tablet formulations, many areas had a higher absorbance ratio than the dried tablet formulations. From these results, it is qualitatively confirmed that the MgO was changed to magnesium hydroxide (Mg(OH)2) by humidification. Although these results were observed in the four types of MgO tablet formulations, only one type of tablet formulation was less affected by humidification. In addition, although most tablet formulations tended to prolong disintegration time due to humidification, there was almost no effect of humidification on the disintegration time in one type of tablet formulation, which had little change in the above evaluation. Thus, in most commercial MgO tablet formulations, humidification prolongs the disintegration time, and Mg(OH)2 significantly contributes to this factor.
- 1 February 2023
- Published by Pharmaceutical Society of Japan in Chemical and Pharmaceutical Bulletin
- Vol. 71 (2) , 165-174
Open AccessQuality Evaluation of Humidified Magnesium Oxide Tablet Formulations with Respect to Disintegration Time Prolongation
In the present study, we conducted a detailed evaluation of the effects of humidification on the quality of five types of commercial magnesium oxide (MgO) tablet formulations. When near-IR spectroscopy was performed, a peak derived from the first overtone of the stretching vibration of the hydroxyl group was observed at approximately 7200 cm−1 in a humidified MgO tablet formulation. To visually evaluate the effect of this humidification, a mapping image was created using microscopic IR spectroscopy. In the IR spectrum, a peak derived from the stretching vibration of the hydroxyl group appears at approximately 3700 cm−1, so we created a mapping image using the absorbance ratio of 3700 and 3400 cm−1 as an index. In the mapping image of humidified MgO tablet formulations, many areas had a higher absorbance ratio than the dried tablet formulations. From these results, it is qualitatively confirmed that the MgO was changed to magnesium hydroxide (Mg(OH)2) by humidification. Although these results were observed in the four types of MgO tablet formulations, only one type of tablet formulation was less affected by humidification. In addition, although most tablet formulations tended to prolong disintegration time due to humidification, there was almost no effect of humidification on the disintegration time in one type of tablet formulation, which had little change in the above evaluation. Thus, in most commercial MgO tablet formulations, humidification prolongs the disintegration time, and Mg(OH)2 significantly contributes to this factor.
- Open Access
- 30 January 2020
- Published by Springer Nature in Journal of Pharmaceutical Health Care and Sciences
- Vol. 6 (1) , 1-11
Comparison of various pharmaceutical properties of clobetasol propionate cream formulations - considering stability of mixture with moisturizer-
The clobetasol propionate cream formulations (CLBCr) belong to the “strongest” group, and are used widely. In addition, those formulations are often used as a mixture with moisturizer. Recently, we evaluated pharmaceutical properties of the CLBCr using near infrared (NIR) spectroscopy, and characteristic NIR spectra depending on the formulation were observed. In the present study, we attempted to evaluate the more diverse pharmaceutical properties of CLBCr, including the stability of mixture of CLBCr and moisturizer. Pharmaceutical properties of CLBCr were evaluated using from rheological characteristics, microscopic observation, dye permeability observations, electrical conductivity method, thermogravimetry-differential thermal analysis (TG-DTA) and near infrared (NIR) spectroscopy. Stability of mixtures of CLBCr and moisturizer were evaluated using from dye method and NIR spectroscopy. The hardness of Dermovate® (DRM), Glydil® (GDL), and Myalone® (MYA) was greater than that of CLBCr. High concentrations of white beeswax were considered the reason for the hardness of DRM and GDL. On the other hand, the hardness of MYA may be due to the presence of macrogol 6000. After storage of the cream formulations discharged from the tube at room temperature, mass reduction and attenuation of the peak reflecting water of NIR spectroscopy occurred in a time-dependent manner, except for GDL and MYA. Only GDL was shown to be a w/o-type formulation by dye and electric conductivity measurements, which suggested that this was the reason for the lack of changes in the mass or NIR spectrum of samples after storage. In the NIR spectrum of MYA, the peak reflecting water slightly increased in a time-dependent manner, suggesting the water absorption of macrogol 6000. TG-DTA provided curves indicating the presence of water in each formulation, except for MYA, which was consistent with water quantification previously reported. Finally, when mixing the CLBCr with a moisturizer, in any CLBCr, the stability of the mixture with w/o-type moisturizer varies greatly depending on the each CLBCr. Thus, even for cream formulations with the same active pharmaceutical ingredient, pharmaceutical properties and stability of mixture with moisturizer may different significantly.
- 30 January 2020
- Published by Springer Nature in Journal of Pharmaceutical Health Care and Sciences
- Vol. 6 (1) , 1-11
Open AccessComparison of various pharmaceutical properties of clobetasol propionate cream formulations - considering stability of mixture with moisturizer-
The clobetasol propionate cream formulations (CLBCr) belong to the “strongest” group, and are used widely. In addition, those formulations are often used as a mixture with moisturizer. Recently, we evaluated pharmaceutical properties of the CLBCr using near infrared (NIR) spectroscopy, and characteristic NIR spectra depending on the formulation were observed. In the present study, we attempted to evaluate the more diverse pharmaceutical properties of CLBCr, including the stability of mixture of CLBCr and moisturizer. Pharmaceutical properties of CLBCr were evaluated using from rheological characteristics, microscopic observation, dye permeability observations, electrical conductivity method, thermogravimetry-differential thermal analysis (TG-DTA) and near infrared (NIR) spectroscopy. Stability of mixtures of CLBCr and moisturizer were evaluated using from dye method and NIR spectroscopy. The hardness of Dermovate® (DRM), Glydil® (GDL), and Myalone® (MYA) was greater than that of CLBCr. High concentrations of white beeswax were considered the reason for the hardness of DRM and GDL. On the other hand, the hardness of MYA may be due to the presence of macrogol 6000. After storage of the cream formulations discharged from the tube at room temperature, mass reduction and attenuation of the peak reflecting water of NIR spectroscopy occurred in a time-dependent manner, except for GDL and MYA. Only GDL was shown to be a w/o-type formulation by dye and electric conductivity measurements, which suggested that this was the reason for the lack of changes in the mass or NIR spectrum of samples after storage. In the NIR spectrum of MYA, the peak reflecting water slightly increased in a time-dependent manner, suggesting the water absorption of macrogol 6000. TG-DTA provided curves indicating the presence of water in each formulation, except for MYA, which was consistent with water quantification previously reported. Finally, when mixing the CLBCr with a moisturizer, in any CLBCr, the stability of the mixture with w/o-type moisturizer varies greatly depending on the each CLBCr. Thus, even for cream formulations with the same active pharmaceutical ingredient, pharmaceutical properties and stability of mixture with moisturizer may different significantly.
- Open Access
- 1 December 2019
- Published by Pharmaceutical Society of Japan in Biological and Pharmaceutical Bulletin
- Vol. 42 (12) , 2102-2108
Evaluation of the Water Content and Skin Permeability of Active Pharmaceutical Ingredients in Ketoprofen Poultice Formulations Removed from Their Airtight Containers and Left at Room Temperature
The poultice formulation is a patch containing a large amount of water. It is known that the water contained in the adhesive polymer layer (ADPL) of poultice affects the cooling sensation and skin permeability of the active pharmaceutical ingredient (API). In this study, we evaluated the relationship between the water content in a ketoprofen poultice formulation and the amount of time the poultice was left out at room temperature after removal from the airtight container, as well as the influence of the decreasing water content on the skin permeability of the API. After removing the poultice from the container for 1 h, the mass of the ADPL decreased by approximately 40%. When the near-infrared (NIR) spectrum of the ADPL of poultice was measured, the peaks reflecting the hydroxyl group were attenuated depending on the time left out at room temperature. It is suggested that the changes in the mass and NIR spectrum of the ADPL are caused by the change in the water content. Moreover, when the permeability of API was evaluated on hairless mouse skin, the cumulative skin permeation amount and flux decreased, while the lag time was prolonged as the time left out increased. These results suggest that the skin permeability of the API is impaired by water evaporation and that maintaining the water in the ADPL in poultice is very important from not only the viewpoint of cooling sensation, tackiness and moisturizing but also the skin permeability of the API.
- 1 December 2019
- Published by Pharmaceutical Society of Japan in Biological and Pharmaceutical Bulletin
- Vol. 42 (12) , 2102-2108
Open AccessEvaluation of the Water Content and Skin Permeability of Active Pharmaceutical Ingredients in Ketoprofen Poultice Formulations Removed from Their Airtight Containers and Left at Room Temperature
The poultice formulation is a patch containing a large amount of water. It is known that the water contained in the adhesive polymer layer (ADPL) of poultice affects the cooling sensation and skin permeability of the active pharmaceutical ingredient (API). In this study, we evaluated the relationship between the water content in a ketoprofen poultice formulation and the amount of time the poultice was left out at room temperature after removal from the airtight container, as well as the influence of the decreasing water content on the skin permeability of the API. After removing the poultice from the container for 1 h, the mass of the ADPL decreased by approximately 40%. When the near-infrared (NIR) spectrum of the ADPL of poultice was measured, the peaks reflecting the hydroxyl group were attenuated depending on the time left out at room temperature. It is suggested that the changes in the mass and NIR spectrum of the ADPL are caused by the change in the water content. Moreover, when the permeability of API was evaluated on hairless mouse skin, the cumulative skin permeation amount and flux decreased, while the lag time was prolonged as the time left out increased. These results suggest that the skin permeability of the API is impaired by water evaporation and that maintaining the water in the ADPL in poultice is very important from not only the viewpoint of cooling sensation, tackiness and moisturizing but also the skin permeability of the API.
- 1 November 2018
- Published by Elsevier in European Journal of Pharmaceutical Sciences
- Vol. 124, 199-207
Mixtures of betamethasone butyrate propionate ointments and heparinoid oil-based cream: Physical stability evaluation
- 1 November 2018
- Published by Elsevier in European Journal of Pharmaceutical Sciences
- Vol. 124, 199-207
Mixtures of betamethasone butyrate propionate ointments and heparinoid oil-based cream: Physical stability evaluation
- Open Access
- 1 January 2015
- Published by Pharmaceutical Society of Japan in Chemical and Pharmaceutical Bulletin
- Vol. 63 (5) , 377-383
Magnetic Resonance Imaging of the Phase Separation in Mixed Preparations of Moisturizing Cream and Steroid Ointment after Centrifugation
A mixed preparation consisting of a water-in-oil emulsion-type moisturizing cream and a steroid ointment is frequently prescribed for the treatment of atopic dermatitis. We have investigated the compatibility of moisturizing creams and ointments because there are concerns regarding the physical stability of these mixed preparations. The key technology used in this study was magnetic resonance imaging (MRI). A commercial moisturizing cream and white petrolatum or clobetasone butyrate (CLB) ointment samples were mixed in a weight ratio of 1 : 1. A centrifugation test protocol (20000×g for 3 min) was implemented to accelerate the destabilization processes in the samples. After centrifugation, the mixed preparations separated into three distinct layers (upper, middle, and lower), while no phase separation was observed using moisturizing cream alone. The phase separation was monitored using chemical shift selective images of water and oil and quantitative T2 maps. In addition, MR and near-infrared spectroscopy were employed for component analysis of each phase-separated layer. Collectively, it was confirmed that the lower layer contained water, oils, and organic solvent, while the upper and middle layers were composed solely of oils. Furthermore, this study investigated the distribution of CLB in the phase-separated samples and showed that a heterogeneous distribution existed. From our results, it was confirmed that the mixed preparation became unstable because of the incompatibility of the moisturizing cream and ointment.
- 1 January 2015
- Published by Pharmaceutical Society of Japan in Chemical and Pharmaceutical Bulletin
- Vol. 63 (5) , 377-383
Open AccessMagnetic Resonance Imaging of the Phase Separation in Mixed Preparations of Moisturizing Cream and Steroid Ointment after Centrifugation
A mixed preparation consisting of a water-in-oil emulsion-type moisturizing cream and a steroid ointment is frequently prescribed for the treatment of atopic dermatitis. We have investigated the compatibility of moisturizing creams and ointments because there are concerns regarding the physical stability of these mixed preparations. The key technology used in this study was magnetic resonance imaging (MRI). A commercial moisturizing cream and white petrolatum or clobetasone butyrate (CLB) ointment samples were mixed in a weight ratio of 1 : 1. A centrifugation test protocol (20000×g for 3 min) was implemented to accelerate the destabilization processes in the samples. After centrifugation, the mixed preparations separated into three distinct layers (upper, middle, and lower), while no phase separation was observed using moisturizing cream alone. The phase separation was monitored using chemical shift selective images of water and oil and quantitative T2 maps. In addition, MR and near-infrared spectroscopy were employed for component analysis of each phase-separated layer. Collectively, it was confirmed that the lower layer contained water, oils, and organic solvent, while the upper and middle layers were composed solely of oils. Furthermore, this study investigated the distribution of CLB in the phase-separated samples and showed that a heterogeneous distribution existed. From our results, it was confirmed that the mixed preparation became unstable because of the incompatibility of the moisturizing cream and ointment.
- 1 March 2014
- Published by Elsevier in International Journal of Pharmaceutics
- Vol. 463 (1) , 62-67
Comparative pharmaceutical evaluation of brand and generic clobetasone butyrate ointments
- 1 March 2014
- Published by Elsevier in International Journal of Pharmaceutics
- Vol. 463 (1) , 62-67
Comparative pharmaceutical evaluation of brand and generic clobetasone butyrate ointments