Andreas Hess
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Andreas Hess has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Ingbert Mangerig
Universität der Bundeswehr München, Institut für Konstruktiven Ingenieurbau, Werner-Heisenberg-Weg 39, 85577 Neubiberg
3 shared publications - Andreas Fischl
TÜV Süd
1 shared publication - Bernd Kranz
SLV Halle GmbH
1 shared publication - Jörg Herrmann1 shared publication
- Mathias Euler
Universität Stuttgart Institut für Konstruktion und Entwurf Pfaffenwaldring 7 70569 Stuttgart
1 shared publication Michael Hubmann
Ehemals Universität Stuttgart, Stahlbau Hubmann, Leibnizstraße 9–11, 97204 Höchberg/Würzburg
1 shared publication
Latest Publications
Ermüdungsgerechte Fachwerke aus Rundhohlprofilen mit dickwandigen Gurten
Der Beitrag gibt einen Überblick über die Ergebnisse des ZUTECH‐Forschungsvorhabens FOSTA P815, das sich mit dem Ermüdungsverhalten von geschweißten K‐ und KK‐Knoten in Fachwerken aus Rundhohlprofilen mit dickwandigen Gurten beschäftigt hat. Im Mittelpunkt des Beitrags stehen die experimentellen und numerischen Untersuchungen, die zu Planungs‐, Fertigungs‐ und Bemessungsempfehlungen für die Praxis zusammengefasst wurden.Fatigue‐resistant trusses of circular hollow sections with thick‐walled chords.This paper gives an overview about the results of the ZUTECH‐Research Project FOSTA P815 dealing with the fatigue behaviour of welded K‐ and KK‐joints in trusses made of circular hollow sections with thickwalled chords. The focus is laid on the experimental and numerical investigations that had been summarized to recommendations on planning, fabrication and design for practitioners.
Ermüdungsgerechte Fachwerke aus Rundhohlprofilen mit dickwandigen Gurten
Der Beitrag gibt einen Überblick über die Ergebnisse des ZUTECH‐Forschungsvorhabens FOSTA P815, das sich mit dem Ermüdungsverhalten von geschweißten K‐ und KK‐Knoten in Fachwerken aus Rundhohlprofilen mit dickwandigen Gurten beschäftigt hat. Im Mittelpunkt des Beitrags stehen die experimentellen und numerischen Untersuchungen, die zu Planungs‐, Fertigungs‐ und Bemessungsempfehlungen für die Praxis zusammengefasst wurden.Fatigue‐resistant trusses of circular hollow sections with thick‐walled chords.This paper gives an overview about the results of the ZUTECH‐Research Project FOSTA P815 dealing with the fatigue behaviour of welded K‐ and KK‐joints in trusses made of circular hollow sections with thickwalled chords. The focus is laid on the experimental and numerical investigations that had been summarized to recommendations on planning, fabrication and design for practitioners.
Zur Stabilität von oberflächennah durch plastisches Umformen eingeprägten Eigenspannungen
Durch das Einprägen von oberflächennahen Eigenspannungen kann die Lebensdauer von Metallbauteilen erheblich erhöht werden. An den Außenflächen werden dabei durch plastisches Umformen Druckeigenspannungen erzeugt, die zusammen mit Zugeigenspannungen ein Gleichgewichtssystem bilden. Da bei schwingenden Beanspruchungen mit anwachsenden Schädigungen auch zunehmende Verzerrungen entstehen, die Aufrechterhaltung von Eigenspannungen aber eine Blockade von Bewegungen voraussetzt, sind im Zusammenhang mit deren Stabilität Fragen der Materialdegradation zu behandeln. Ausgehend von Versetzungsbewegungen werden Fragen zur Stabilität eingeprägter plastischer Verformungen diskutiert und Befunde von Ermüdungstests an nachbehandelten Schweißnähten vorgestellt.The stability of subsurface residual stresses induced by plastic deformation. Induced subsurface residual compression stresses can considerably increase the service life of metal components. In the case of such stresses on the outer surfaces generated by plastic deformation an equilibrium system with residual tensile stresses inside exists. Under cyclic loading the material degradation process causes with increased strains against the odds of a continued existence of residual stresses. In accordance with material degradation questions with regard to the stability of imposed residual stresses have to be answered. The dislocation motion issues are discussed in view of the stability induced plastic deformations, moreover, results of fatigue tests on specimen with post‐treated welds are presented.
Zur Stabilität von oberflächennah durch plastisches Umformen eingeprägten Eigenspannungen
Durch das Einprägen von oberflächennahen Eigenspannungen kann die Lebensdauer von Metallbauteilen erheblich erhöht werden. An den Außenflächen werden dabei durch plastisches Umformen Druckeigenspannungen erzeugt, die zusammen mit Zugeigenspannungen ein Gleichgewichtssystem bilden. Da bei schwingenden Beanspruchungen mit anwachsenden Schädigungen auch zunehmende Verzerrungen entstehen, die Aufrechterhaltung von Eigenspannungen aber eine Blockade von Bewegungen voraussetzt, sind im Zusammenhang mit deren Stabilität Fragen der Materialdegradation zu behandeln. Ausgehend von Versetzungsbewegungen werden Fragen zur Stabilität eingeprägter plastischer Verformungen diskutiert und Befunde von Ermüdungstests an nachbehandelten Schweißnähten vorgestellt.The stability of subsurface residual stresses induced by plastic deformation. Induced subsurface residual compression stresses can considerably increase the service life of metal components. In the case of such stresses on the outer surfaces generated by plastic deformation an equilibrium system with residual tensile stresses inside exists. Under cyclic loading the material degradation process causes with increased strains against the odds of a continued existence of residual stresses. In accordance with material degradation questions with regard to the stability of imposed residual stresses have to be answered. The dislocation motion issues are discussed in view of the stability induced plastic deformations, moreover, results of fatigue tests on specimen with post‐treated welds are presented.
- 1 January 2009
- Published by International Association for Bridge and Structural Engineering (IABSE)
A new cost efficient measurement system for bridges
The test and maintenance of existing bridges require a large part of the available resources. In order to analyse the bridges faster and economically the Institute for Structural Engineering at University of the German Armed Forces in Munich is developing a system, which enables the user to estimate the bending stiffness of a bridge without any documents of the structure. A shaker system will be developed, which will be installed temporally on the bridge. It will vibrate the bridge with selective frequencies. The response of the bridge will be measured and recorded at the same time. In the second step a procedure will be developed to obtain the bending stiffness of the bridges by means of the calculated modal parameters such as natural frequencies.
- 1 January 2009
- Published by International Association for Bridge and Structural Engineering (IABSE)
A new cost efficient measurement system for bridges
The test and maintenance of existing bridges require a large part of the available resources. In order to analyse the bridges faster and economically the Institute for Structural Engineering at University of the German Armed Forces in Munich is developing a system, which enables the user to estimate the bending stiffness of a bridge without any documents of the structure. A shaker system will be developed, which will be installed temporally on the bridge. It will vibrate the bridge with selective frequencies. The response of the bridge will be measured and recorded at the same time. In the second step a procedure will be developed to obtain the bending stiffness of the bridges by means of the calculated modal parameters such as natural frequencies.