Leijing Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Leijing Liu has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Wenjing Tian
State Key Laboratory of Supramolecular Structure and Materials Jilin University Changchun China
13 shared publications Bin Xu
Jilin Univ, State Key Lab Supramol Struct & Mat, Changchun 130012, Peoples R China
5 shared publications- Bin Xu
State Key Laboratory of Supramolecular Structure and Materials Jilin University Changchun China
5 shared publications Shan Jiang
Jilin Univ, State Key Lab Supramol Struct & Mat, Changchun 130012, Peoples R China
3 shared publicationsWenyue Ma
Jilin Univ, State Key Lab Supramol Struct & Mat, Changchun 130012, Peoples R China
3 shared publications- Hui Li
Jilin University
2 shared publications
Latest Publications
- 3 March 2026
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 17 (12) , 1141-1161
Covalent organic frameworks: synthesis, and biological and chemical sensing
Covalent organic frameworks (COFs), a class of porous crystalline materials with designable structures and tuneable properties, have attracted extensive attention in the field of materials science. The exceptional properties of COFs, particularly their high surface area, tuneable pore size, and functionalizable surfaces, make them ideal platforms for sensing applications. The rational design and synthesis of COFs are fundamental to unlocking their full potential in various applications. This review comprehensively summarizes the research progress of COFs, focusing on their common synthesis methods, applications in biosensing and chemical sensing, and current challenges and future perspectives. As for synthesis, two-dimensional COFs are prepared via solvothermal, room-temperature, or microwave-assisted methods (with strengths in crystallinity, mild conditions, and efficiency), while three-dimensional COFs use solvothermal, ionothermal, or mechanochemical approaches (expanding the synthesis scope and enabling large-scale production). In applications, COFs excel in biosensing (enzyme immobilization, protein/nucleic acid detection, biomarker recognition, cellular sensing) and chemical sensing (explosives, metal ions, gases, etc.) due to their high specific surface area, adjustable pores, and chemical stability. Current challenges include high synthesis cost and poor environmental stability, and future work will focus on optimizing large-scale synthesis, enhancing stability, and developing intelligent sensing systems. This review provides a concise reference for further research and application of COFs.
- 3 March 2026
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 17 (12) , 1141-1161
Covalent organic frameworks: synthesis, and biological and chemical sensing
Covalent organic frameworks (COFs), a class of porous crystalline materials with designable structures and tuneable properties, have attracted extensive attention in the field of materials science. The exceptional properties of COFs, particularly their high surface area, tuneable pore size, and functionalizable surfaces, make them ideal platforms for sensing applications. The rational design and synthesis of COFs are fundamental to unlocking their full potential in various applications. This review comprehensively summarizes the research progress of COFs, focusing on their common synthesis methods, applications in biosensing and chemical sensing, and current challenges and future perspectives. As for synthesis, two-dimensional COFs are prepared via solvothermal, room-temperature, or microwave-assisted methods (with strengths in crystallinity, mild conditions, and efficiency), while three-dimensional COFs use solvothermal, ionothermal, or mechanochemical approaches (expanding the synthesis scope and enabling large-scale production). In applications, COFs excel in biosensing (enzyme immobilization, protein/nucleic acid detection, biomarker recognition, cellular sensing) and chemical sensing (explosives, metal ions, gases, etc.) due to their high specific surface area, adjustable pores, and chemical stability. Current challenges include high synthesis cost and poor environmental stability, and future work will focus on optimizing large-scale synthesis, enhancing stability, and developing intelligent sensing systems. This review provides a concise reference for further research and application of COFs.
- 5 September 2024
- Published by Elsevier in Chinese Chemical Letters
- Vol. 35 (12)
Corrigendum to ‛Morphology controllable conjugated network polymers based on AIE-active building block for TNP detection’
- 5 September 2024
- Published by Elsevier in Chinese Chemical Letters
- Vol. 35 (12)
Corrigendum to ‛Morphology controllable conjugated network polymers based on AIE-active building block for TNP detection’
- Open Access
- 30 March 2023
- Published by MDPI AG in Chemosensors
- Vol. 11 (4) , 214
Dual-Response Photofunctional Covalent Organic Framework for Acid Detection in Various Solutions
The detection of acid in different solution environments plays a significant role in chemical, environmental and biological fields. However, reducing the constraints of detecting environment, such as aqueous, organic solvents and mixed phases of aqueous and organic phases, remains a challenge. Herein, by combining N, N, N′, N′-tetrakis(4-aminophenyl)-1,4-phenylenediamine (TPBD) and terephthalaldehyde (TA) via Shiff-base condensation, we constructed a covalent organic framework (COF) TPBD-TA COF. The COF exhibits color change from red to dark red as well as fluorescence quenching with the increase of acid contents in either aqueous or organic solvents, or a mixture of aqueous and organic solvents, due to the weak donor-acceptor interactions within the COF as well as the weak proton ionization ability of the solutions. Therefore, regardless of the detection environment, TPBD-TA COF can realize color and fluorescence dual-response to acid with the detection limit as low as 0.4 μmol/L and 58 nmol/L, respectively, due to the protonation of the nitrogen atoms on imine bonds of the COF.
- 30 March 2023
- Published by MDPI AG in Chemosensors
- Vol. 11 (4) , 214
Open AccessDual-Response Photofunctional Covalent Organic Framework for Acid Detection in Various Solutions
The detection of acid in different solution environments plays a significant role in chemical, environmental and biological fields. However, reducing the constraints of detecting environment, such as aqueous, organic solvents and mixed phases of aqueous and organic phases, remains a challenge. Herein, by combining N, N, N′, N′-tetrakis(4-aminophenyl)-1,4-phenylenediamine (TPBD) and terephthalaldehyde (TA) via Shiff-base condensation, we constructed a covalent organic framework (COF) TPBD-TA COF. The COF exhibits color change from red to dark red as well as fluorescence quenching with the increase of acid contents in either aqueous or organic solvents, or a mixture of aqueous and organic solvents, due to the weak donor-acceptor interactions within the COF as well as the weak proton ionization ability of the solutions. Therefore, regardless of the detection environment, TPBD-TA COF can realize color and fluorescence dual-response to acid with the detection limit as low as 0.4 μmol/L and 58 nmol/L, respectively, due to the protonation of the nitrogen atoms on imine bonds of the COF.
- Open Access
Polymorphic Covalent Organic Frameworks: Molecularly Defined Pore Structures and Iodine Adsorption Property
Radioactive iodine-capturing materials are urgently needed for the emerging challenges in nuclear waste disposal. The various pore structures of covalent organic frameworks (COFs) render them promising candidates for efficient iodine adsorption. However, the detailed structure–property relationship of COFs in iodine adsorption remains elusive. Herein, two polymorphic COFs with significantly different crystalline structures are obtained based on the same building blocks with varied molecular ratios. The two COFs both have high crystallinity, high specific surface area, and excellent chemical and thermal stability. Compared with the [C4+C4] topology (PyT-2) with an AA stacking form, the [C4+C2] topology (PyT-1) with an AB stacking form has more twisted pore channels and complex ink-bottle pores. At ambient conditions, PyT-1 and PyT-2 both exhibit good adsorption properties for iodine capture either in a gaseous or liquid medium. Remarkably, PyT-1 presents an excellent maximum adsorption capacity (0.635 g g−1), and the adsorption limit of PyT-2 is 0.445 g g−1 in an n-hexane solution with an iodine concentration of 400 mg L−1, which is highly comparable to the state-of-the-art iodine absorption performance. This study provides a guide for the future molecular design strategy toward novel iodine adsorbents.
Open AccessPolymorphic Covalent Organic Frameworks: Molecularly Defined Pore Structures and Iodine Adsorption Property
Radioactive iodine-capturing materials are urgently needed for the emerging challenges in nuclear waste disposal. The various pore structures of covalent organic frameworks (COFs) render them promising candidates for efficient iodine adsorption. However, the detailed structure–property relationship of COFs in iodine adsorption remains elusive. Herein, two polymorphic COFs with significantly different crystalline structures are obtained based on the same building blocks with varied molecular ratios. The two COFs both have high crystallinity, high specific surface area, and excellent chemical and thermal stability. Compared with the [C4+C4] topology (PyT-2) with an AA stacking form, the [C4+C2] topology (PyT-1) with an AB stacking form has more twisted pore channels and complex ink-bottle pores. At ambient conditions, PyT-1 and PyT-2 both exhibit good adsorption properties for iodine capture either in a gaseous or liquid medium. Remarkably, PyT-1 presents an excellent maximum adsorption capacity (0.635 g g−1), and the adsorption limit of PyT-2 is 0.445 g g−1 in an n-hexane solution with an iodine concentration of 400 mg L−1, which is highly comparable to the state-of-the-art iodine absorption performance. This study provides a guide for the future molecular design strategy toward novel iodine adsorbents.
- 15 December 2021
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 10 (7) , 2807-2813
A covalent organic polymer for turn-on fluorescence sensing of hydrazine
It is very important to detect hydrazine sensitively, efficiently, and selectively since hydrazine is a highly toxic organic molecule which will bring great threat to the health of human beings. Herein, a covalent organic polymer, COP-Ta, containing ynone reaction sites has been designed and successfully synthesized via the Sonogashira coupling reaction by using tetrakis(4-ethynylphenyl)ethene (TPE-Al) and terephthaloyl chloride (TPC). COP-Ta exhibits weak fluorescence in the solid state and uniform dispersion of ethanol. But when hydrazine is added into the uniform dispersion of ethanol, the fluorescence of the dispersion is significantly enhanced due to the chemical reaction between the ynone structure in COP-Ta and hydrazine, in which the ynone structure cyclizes to pyrazole, leading to the restriction of the intramolecular charge transfer effect, and the obvious increase of fluorescence from COP-Ta. As a turn-on fluorescence sensor for the detection of hydrazine, COP-Ta shows a high sensitivity (detection limit: 0.16 μM), a wide linear range (0–50 μM), and a high selectivity. COP-Ta can detect hydrazine under weakly acidic, neutral, and weakly alkaline conditions in aqueous solutions. In addition, COP-Ta has been applied to detect hydrazine in real water samples. More importantly, we have successfully applied this sensor for the detection of hydrazine in human blood serum, and achieved satisfactory detection performance. This demonstrates that the fluorescent covalent organic polymer containing the ynone structure can be used for the detection of hydrazine effectively and applied in the field of environmental protection.
- 15 December 2021
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 10 (7) , 2807-2813
A covalent organic polymer for turn-on fluorescence sensing of hydrazine
It is very important to detect hydrazine sensitively, efficiently, and selectively since hydrazine is a highly toxic organic molecule which will bring great threat to the health of human beings. Herein, a covalent organic polymer, COP-Ta, containing ynone reaction sites has been designed and successfully synthesized via the Sonogashira coupling reaction by using tetrakis(4-ethynylphenyl)ethene (TPE-Al) and terephthaloyl chloride (TPC). COP-Ta exhibits weak fluorescence in the solid state and uniform dispersion of ethanol. But when hydrazine is added into the uniform dispersion of ethanol, the fluorescence of the dispersion is significantly enhanced due to the chemical reaction between the ynone structure in COP-Ta and hydrazine, in which the ynone structure cyclizes to pyrazole, leading to the restriction of the intramolecular charge transfer effect, and the obvious increase of fluorescence from COP-Ta. As a turn-on fluorescence sensor for the detection of hydrazine, COP-Ta shows a high sensitivity (detection limit: 0.16 μM), a wide linear range (0–50 μM), and a high selectivity. COP-Ta can detect hydrazine under weakly acidic, neutral, and weakly alkaline conditions in aqueous solutions. In addition, COP-Ta has been applied to detect hydrazine in real water samples. More importantly, we have successfully applied this sensor for the detection of hydrazine in human blood serum, and achieved satisfactory detection performance. This demonstrates that the fluorescent covalent organic polymer containing the ynone structure can be used for the detection of hydrazine effectively and applied in the field of environmental protection.
- 7 October 2021
- Published by Wiley in Advanced Materials
- Vol. 33 (48) , 2105466
Organic Single Crystals with High Photoluminescence Quantum Yields Close to 100% and High Mobility for Optoelectronic Devices
Organic single crystals with excellent optical and electrical properties are critical for the development of organic optoelectronics. Herein, two compounds 9,10‐bis([N,N‐diphenyl]‐4′‐phenylethynyl)anthracene (TPA‐An) and 9,10‐bis([1′,3′‐diphenyl]‐5′‐phenylethynyl)anthracene (TBA‐An) are synthesized by introducing two different luminescent groups, triphenylamine and 1,3‐diphenylbenzene, at the 9,10 positions of anthracene via triple bond connection. Single crystals based on TPA‐An and TBA‐An with a ribbon morphology obtained through the slow solvent‐evaporation method exhibit high photoluminescence quantum yields (PLQYs) of 98% and 99% at room temperature, and remarkable hole mobilities of 0.45 and 0.15 cm2 V−1 s−1 in single‐crystal organic field‐effect transistors (SC‐OFETs). Furthermore, UV phototransistors based on the two single crystals obtain photosensitivities of 1.03 × 103 and 3.45 × 104, ultrahigh photoresponsivities of 7.19 × 105 and 1.50 × 105 A W−1, and the detectivities exceeding 1.40 × 1016 and 1.60 × 1017 Jones.
- 7 October 2021
- Published by Wiley in Advanced Materials
- Vol. 33 (48) , 2105466
Organic Single Crystals with High Photoluminescence Quantum Yields Close to 100% and High Mobility for Optoelectronic Devices
Organic single crystals with excellent optical and electrical properties are critical for the development of organic optoelectronics. Herein, two compounds 9,10‐bis([N,N‐diphenyl]‐4′‐phenylethynyl)anthracene (TPA‐An) and 9,10‐bis([1′,3′‐diphenyl]‐5′‐phenylethynyl)anthracene (TBA‐An) are synthesized by introducing two different luminescent groups, triphenylamine and 1,3‐diphenylbenzene, at the 9,10 positions of anthracene via triple bond connection. Single crystals based on TPA‐An and TBA‐An with a ribbon morphology obtained through the slow solvent‐evaporation method exhibit high photoluminescence quantum yields (PLQYs) of 98% and 99% at room temperature, and remarkable hole mobilities of 0.45 and 0.15 cm2 V−1 s−1 in single‐crystal organic field‐effect transistors (SC‐OFETs). Furthermore, UV phototransistors based on the two single crystals obtain photosensitivities of 1.03 × 103 and 3.45 × 104, ultrahigh photoresponsivities of 7.19 × 105 and 1.50 × 105 A W−1, and the detectivities exceeding 1.40 × 1016 and 1.60 × 1017 Jones.
- 24 March 2021
- Published by Royal Society of Chemistry (RSC) in Materials Chemistry Frontiers
- Vol. 5 (11) , 4193-4201
Dual-functional two-dimensional covalent organic frameworks for water sensing and harvesting
Two-dimensional covalent organic frameworks (2D COFs) with both water detection and adsorption properties are highly attractive for both basic research and applied research. Herein, we constructed hydrazone-linked Pythz-COF and urea-linked Pyurea-COF based on the building block 1,3,6,8-tetrakis(p-formylphenyl)pyrene (Py). The COFs presented high surface area and good chemical/thermal stabilities, as well as a significant fluorescence quenching response to trace water in organic solvents. The detection limit of water sensing in acetonitrile was as low as 0.09% for Pythz-COF and 0.02% for Pyurea-COF, and the COFs maintained good crystallinity and detection efficiency after at least five cycles. In addition, the COFs showed high atmospheric water harvesting capacity with the maximum water uptake of 83.2 wt% at RH = 90% for Pythz-COF. Both COFs are moisture-stable and easily regenerated. The outstanding sensing behavior and water storage capacity of the COFs give them great prospects in future applications for efficient water detection and adsorption.
- 24 March 2021
- Published by Royal Society of Chemistry (RSC) in Materials Chemistry Frontiers
- Vol. 5 (11) , 4193-4201
Dual-functional two-dimensional covalent organic frameworks for water sensing and harvesting
Two-dimensional covalent organic frameworks (2D COFs) with both water detection and adsorption properties are highly attractive for both basic research and applied research. Herein, we constructed hydrazone-linked Pythz-COF and urea-linked Pyurea-COF based on the building block 1,3,6,8-tetrakis(p-formylphenyl)pyrene (Py). The COFs presented high surface area and good chemical/thermal stabilities, as well as a significant fluorescence quenching response to trace water in organic solvents. The detection limit of water sensing in acetonitrile was as low as 0.09% for Pythz-COF and 0.02% for Pyurea-COF, and the COFs maintained good crystallinity and detection efficiency after at least five cycles. In addition, the COFs showed high atmospheric water harvesting capacity with the maximum water uptake of 83.2 wt% at RH = 90% for Pythz-COF. Both COFs are moisture-stable and easily regenerated. The outstanding sensing behavior and water storage capacity of the COFs give them great prospects in future applications for efficient water detection and adsorption.
- 20 January 2021
- Published by Springer Nature in Chemical Research in Chinese Universities
- Vol. 37 (1) , 100-109
Recent Advances in Mechanism of AIE Mechanochromic Materials
- 20 January 2021
- Published by Springer Nature in Chemical Research in Chinese Universities
- Vol. 37 (1) , 100-109
Recent Advances in Mechanism of AIE Mechanochromic Materials
- Open Access
- 9 October 2018
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 3 (10) , 12886-12892
Label-Free Aptamer-Based Biosensor for Specific Detection of Chloramphenicol Using AIE Probe and Graphene Oxide
A facile, sensitive, and label-free aptamer-based fluorescent biosensor (aptasensor) for chloramphenicol (CAP) detection was successfully developed based on an aggregation-induced emission (AIE) probe and graphene oxide (GO). In this aptasensor, the specific aptamer of CAP (C-Apt) is used as the recognition part, an AIE molecule, 9,10-distyrylanthracene (DSA) derivative with short alkyl chains (9,10-bis{4-[2-(N,N,N-trimethylammonium)-ethoxy]styrene}anthracene dibromide, DSAC2N), as the fluorescent probe, and GO with a low oxidation degree as the fluorescent quencher. Initially, the AIE probe DSAC2N and C-Apt could be adsorbed on GO through π-stacking interactions, and the fluorescence of DSAC2N could be efficiently quenched due to the energy transfer between DSAC2N and GO. When CAP is added, C-Apt can preferentially bind with CAP and the newly formed complex (C-Apt–CAP) can be released from GO, resulting in the recovery of the fluorescence signal of DSAC2N. Thus, with the aid of GO, turn-on detection of CAP can be readily realized by monitoring the fluorescence signal of DSAC2N from “off” to “on”. Under the optimized conditions, the aptasensor exhibits a high sensitivity toward CAP with a limit of detection of 1.26 pg/mL. Besides, we have successfully applied this aptasensor to the detection of CAP in spiked milk.
- 9 October 2018
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 3 (10) , 12886-12892
Open AccessLabel-Free Aptamer-Based Biosensor for Specific Detection of Chloramphenicol Using AIE Probe and Graphene Oxide
A facile, sensitive, and label-free aptamer-based fluorescent biosensor (aptasensor) for chloramphenicol (CAP) detection was successfully developed based on an aggregation-induced emission (AIE) probe and graphene oxide (GO). In this aptasensor, the specific aptamer of CAP (C-Apt) is used as the recognition part, an AIE molecule, 9,10-distyrylanthracene (DSA) derivative with short alkyl chains (9,10-bis{4-[2-(N,N,N-trimethylammonium)-ethoxy]styrene}anthracene dibromide, DSAC2N), as the fluorescent probe, and GO with a low oxidation degree as the fluorescent quencher. Initially, the AIE probe DSAC2N and C-Apt could be adsorbed on GO through π-stacking interactions, and the fluorescence of DSAC2N could be efficiently quenched due to the energy transfer between DSAC2N and GO. When CAP is added, C-Apt can preferentially bind with CAP and the newly formed complex (C-Apt–CAP) can be released from GO, resulting in the recovery of the fluorescence signal of DSAC2N. Thus, with the aid of GO, turn-on detection of CAP can be readily realized by monitoring the fluorescence signal of DSAC2N from “off” to “on”. Under the optimized conditions, the aptasensor exhibits a high sensitivity toward CAP with a limit of detection of 1.26 pg/mL. Besides, we have successfully applied this aptasensor to the detection of CAP in spiked milk.
- 8 May 2018
- Published by Springer Nature in Chemical Research in Chinese Universities
- Vol. 34 (3) , 363-368
A Label-free Fluorescent Aptasensor for Turn-on Monitoring Ochratoxin A Based on AIE-active Probe and Graphene Oxide
- 8 May 2018
- Published by Springer Nature in Chemical Research in Chinese Universities
- Vol. 34 (3) , 363-368
A Label-free Fluorescent Aptasensor for Turn-on Monitoring Ochratoxin A Based on AIE-active Probe and Graphene Oxide