SGSamuel Guillemin

Samuel Guillemin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Samuel Guillemin has a total of 52 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    PROCESS OF CREATING AND COMPARING 4D MODELS OF RHENISH CASTLES IN DIFFERENT MODELING ENVIRONMENTS

    by M. Koehl, J. E. Heitz, D. Rigaud, S. Guillemin

    Alsace is renowned for its rich castle heritage. With more than 500 listed castles, it is one of Europe's most densely fortified areas (Châteaux forts Alsace, 2013). Some of them date back to the 11th century, and most of them are in ruins. It was against this backdrop that these studies were carried out as part of the Châteaux Rhénans - Burgen am Oberrhein project, funded by the European Interreg VI programme. More specifically, within the animation and promotion strands carried out by INSA Strasbourg and Tourismus Südliche Weinstraße. These actions focus on the digitisation and digital promotion of the Rhine castral heritage. Two projects are described and compared in this paper. The Oedenbourg castle is a little-known site. Tucked away behind its famous neighbour (Haut-Koenigsbourg castle, Orschwiller, Alsace, France), this ruined remains from the 15th century houses a Gothic dwelling dating from the 13th century. The Oedenbourg, with its architectural elements from different historical periods, was now the subject of new excavations to shed light on its history. The ruins of Wasenbourg castle, which dominates the commune of Niederbronn-les-Bains in Alsace (France), are the second site to be studied. Historians agree that it was built in the 13th century, but the precise date is around 1272–1275. In 1592, the castle is mentioned as being in ruins. This paper presents the different processes undertaken for the digitisation, 3D modelling and 4D restitution of the two sites, using two different modellers, namely Autodesk Maya for the Oedenbourg and Blender for the Wasenbourg.


  • Open Access

    3D AND HBIM MODELS: DIGITAL TOOLS FOR THE DIAGNOSTIC STUDY OF THE STAIR TURRET OF THE SOUTH-EAST CORNER OF THE MAIN TOWER OF STRASBOURG CATHEDRAL

    by M. Koehl, V. Steiner, S. Guillemin, F. Degenève, A. Zabollone, I. Bignon, C. Taufflieb, L. Tisserand, L. Hedtmann

    During the construction of Strasbourg Cathedral, men aspired to see it radiate eternally. However, like any monument, it experiences structural weakening due to the effects of time, but also to the many external aggressions that damage the materials. Regular interventions therefore make it possible to preserve this building over time. It is in this context of conservation that the cathedral lives to the rhythm of a major restoration campaign since 2014. The objective of this project was to carry out a modeling and a BIM model of the stair turret in the south-east corner of the main tower built entirely of sandstone. This work was part of the preparatory phase of the restoration work on the south-east stair turret of the high tower scheduled for 2024–2025. The objective was to carry out a diagnosis of the turret (35 m high, 168 steps) with the help of a 3D and BIM model. This study could be understood as the beginning of a more global work of 3D representation extendable to the entire monument. In addition, in the spirit of gathering information and building knowledge base, it could be interesting to develop a complete BIM model of the entire building later.


  • COMBINING PHOTOGRAMMETRIC AND BATHYMETRIC DATA TO BUILD A 3D MODEL OF A CANAL TUNNEL

    by Emmanuel Moisan, Christophe Heinkelé, Philippe Foucher, Pierre Charbonnier, Pierre Grussenmeyer, Samuel Guillemin, Mathieu Koehl


  • Open Access

    3D INDOOR DOCUMENTATION OF THE WINTER GARDEN IN THE EARTHENWARE MUSEUM AT SARREGUEMINES (FRANCE)

    by V. Girardet, P. Grussenmeyer, O. Reis, J. Kieffer, S. Guillemin, E. Moisan

    This paper presents the work accomplished in order to digitize and model the Winter Garden of the Earthenware Museum at Sarreguemines (Moselle, France). The objectives were to create a digital archive of this cultural heritage place and to find appropriate ways of promoting it. Topographic, photogrammetric and lasergrammetric methods were used to model the Winter Garden. Different virtual reality tools enabled us to spotlight some of its parts and to offer an immersive visualization. Several challenges had to be taken up during this project. We first had to find out the best processing workflow to model earthenware, which is a highly reflecting material. Image processing was also needed for aesthetic reasons and we finally had to find methods to reduce the size of the models.


  • Open Access

    Evaluating a Static Multibeam Sonar Scanner for 3D Surveys in Confined Underwater Environments

    by Emmanuel Moisan, Pierre Charbonnier, Philippe Foucher, Pierre Grussenmeyer, Samuel Guillemin

    Mechanical Sonar Scanning (MSS) is a recent technology that allows sonar to be used for static measurements in the same way as Terrestrial Laser Scanners (TLS), which makes it an attractive tool for underwater infrastructure surveys. Nevertheless, the metrological capabilities of this type of device have been little explored in the literature, particularly in narrow and shallow environments. In this paper, we report on the experimental assessment of a recent MSS, the BlueView BV5000, in a lock. The 3D sonar scans performed with the system suspended from the surface are registered using an innovative algorithm that exploits external measurements from a total station and the symmetry of the structure. We review the different errors that impair sonar data, and compare the resulting point cloud to a TLS model that was acquired the day before, while the lock was completely emptied for maintenance. After correcting a tilt angle calibration error, the maximum difference is less than 10 cm, and the standard deviation is about 3 cm. Visual inspection shows that coarse defects of the masonry, such as stone lacks or cavities, can be detected in the MSS point cloud, while details smaller than 4 cm, e.g., damaged joints, are harder to notice.


  • Open Access

    DIGITIZATION OF BLOCKS AND VIRTUAL ANASTYLOSIS OF AN ANTIQUE FACADE IN PONT-SAINTE-MAXENCE (FRANCE)

    by E. Alby, P. Grussenmeyer, L. Bitard, S. Guillemin, V. Brunet-Gaston, C. Gaston, R. Rougier

    Keywords: Close Range Photogrammetry, Laser Scanning, Archaeology, Anastylosis, Simulation This paper is dedicated to the digitization of blocks and virtual anastylosis of an antique façade in Pont-Sainte-Maxence (France). In 2014 during the construction of a shopping center, the National Institute for Preventive Archaeological Research (INRAP) discovered a Gallo-Roman site from the 2nd century AD. The most interesting part of the site for the study is a façade of 70 meters long by nearly 10 meters high. The state of the conservation of the blocks of the façade makes them exceptional due to the question raised by the collapse. Representative and symbolic blocks of this building have been selected for a virtual anastylosis study. The blocks discovered belong to different types: decorated architectural blocks, monumental statuary elements and details of very fine decorations. The digital reproduction of the façade will facilitate the formulation of hypothesis for the collapse of the structure. The Photogrammetry and Geomatics Group from INSA Strasbourg is in charge of the digitization, the anastylosis and the development of exploratory methods for understanding the ruin of the façade. To develop the three-dimensional model of the facade, approximately 70 blocks of various dimensions were chosen by the archaeologists. The choice of the digitization technique is made according to the following pragmatic criterion: the movable objects are acquired with a scan-arm or a hand-held scanner in the laboratory and the largest blocks are recorded by photogrammetry at the repository near Paris. The expected types of deliverables are multiple: very accurate 3D models with the most faithful representation to document the objects in the best way and with optimized size model allowing easy handling during anastylosis tests. The visual aspect of the models is also a very important issue. Indeed, textures from photos are an excellent way to bring about the realism of the virtual model, but fine details of the object are sometimes blurred by the uniformity of the color of the original material. Acquisition by hand-held scanner does not provide the textures (they must be acquired according to a complementary process). The data types are therefore different depending on the acquisition. The type of rendering of the models depends therefore on precise choices to be defined optimally. After the acquisition, hypothesis for the construction of the façade must be validated and / or adapted by the anastylosis of the digitized blocks. Different cases must be taken into account. First, the reconstruction of broken blocks is done by adjusting the recovered fragments. If all the fragments discovered are close to the initial shape of the block, the process is assimilated to a puzzle of complex surfaces. If the fragments have no contact but are an integral part of the block, the proportion of hypotheses in relation to the contact pieces is changed. And finally, if the blocks are to be assembled together by superposition and thanks to a common plan, as assumed during the construction, the restitution could be based on the positions of discoveries and hypotheses based on the architectural knowledge of this period. Each of these three methods of reconstruction involves different processes. The three-dimensional model will be validated by the positioning of the blocks and extended according to the actual dimensions of the façade. Different collapse scenarios will result from this study.


  • Open Access

    3D RECORDING AND MODELLING OF MIDDLE-AGE FORTRESS IN DENSE VEGETATION ENVIRONMENT

    by M. Koehl, Y. Courtois, S. Guillemin

    Keywords: Cultural Heritage, TLS, UAV, dense vegetation, 3D modelling, point cloud segmentation, DTM extraction The Schwartzenbourg castle is a Middle-Ages fortress which was built in 1261. It is situated above the valley of Munster in Alsace, France. It was mainly used as a fortified place and a jail. In the early 15th century, the structure has deteriorated. Even after some repairs, it fell into ruins during the Thirty Years’ war (1618-1648) and stayed uninhabited. During World War I, the German army used the place as a vantage point and also built a blockhouse inside the ruins. Nowadays, the ruins are gradually collapsing and the remains of the old walls are completely covered by thick plants. The goal of this project was to create a 3D-model of the site before closing its access, which became too dangerous for people. This modelling is divided into two elements: on one hand, a digital terrain model (DTM) of the site in order to replace the castle and to analyze the background of its original environment; on the other hand, a 3D modelling of the ruins of the castle invaded by the vegetation. Indeed, the main difficulty of the measurement is obviously the dense vegetation which hides the castle. Held back for years outside the castle, it has now become an integral part of the ruins. This vegetation is finally today usually the first threat of heritage buildings. After a preliminary inspection of the site as well as difficulties of the project, the first step consisted of the survey of the whole environment of the site. We will therefore describe the different phases of the survey with the initial implementation of a georeferenced network on site. We will present the terrestrial laser scanning (TLS) surveys, then complementary surveys carried out by aerial photogrammetry. To be implemented, we had to wait for an advanced autumn in order to have as few leaves on trees as possible. The major step of processing of point clouds described in this paper is then the extraction of a DTM by using techniques to pass through the vegetation, or better to segment the points into different classes, one of these that would be the soil i.e. DTM, another consists into wall parts of the ruins.

  • Open Access

    DYNAMIC 3D MODELING OF A CANAL-TUNNEL USING PHOTOGRAMMETRIC AND BATHYMETRIC DATA

    by E. Moisan, C. Heinkele, P. Charbonnier, P. Foucher, P. Grussenmeyer, S. Guillemin, M. Koehl

    Keywords: 3D modeling, multibeam echosounder, photogrammetry, inspection, underwater This contribution introduces an original method for dynamically surveying the vault and underwater parts of a canal-tunnel for 3D modeling. The recording system, embedded on a barge, is composed of cameras that provide images of the above-water part of the tunnel, and a sonar that acquires underwater 3D profiles. In this contribution we propose to fully exploit the capacities of photogrammetry to deal with the issue of geo-referencing data in the absence of global positioning system (GPS) data. More specifically, we use it both for reconstructing the vault and side walls of the tunnel in 3D and for estimating the trajectory of the boat, which is necessary to rearrange sonar profiles to form the 3D model of the canal. We report on a first experimentation carried out inside a canal-tunnel and show promising preliminary results that illustrate the potentialities of the proposed approach.


  • Open Access

    Adjustment of Sonar and Laser Acquisition Data for Building the 3D Reference Model of a Canal Tunnel

    by Emmanuel Moisan, Pierre Charbonnier, Philippe Foucher, Pierre Grussenmeyer, Samuel Guillemin, Mathieu Koehl

    In this paper, we focus on the construction of a full 3D model of a canal tunnel by combining terrestrial laser (for its above-water part) and sonar (for its underwater part) scans collected from static acquisitions. The modeling of such a structure is challenging because the sonar device is used in a narrow environment that induces many artifacts. Moreover, the location and the orientation of the sonar device are unknown. In our approach, sonar data are first simultaneously denoised and meshed. Then, above- and under-water point clouds are co-registered to generate directly the full 3D model of the canal tunnel. Faced with the lack of overlap between both models, we introduce a robust algorithm that relies on geometrical entities and partially-immersed targets, which are visible in both the laser and sonar point clouds. A full 3D model, visually promising, of the entrance of a canal tunnel is obtained. The analysis of the method raises several improvement directions that will help with obtaining more accurate models, in a more automated way, in the limits of the involved technology.


  • An Image-Based Inspection System for Canal Tunnel Heritage

    by P. Charbonnier, P. Foucher, P. Chavant, V. Muzet, D. Prybyla, T. Perrin, J.-L. Albert, P. Grussenmeyer, S. Guillemin, M. Koehl

    Nowadays, 33 canal tunnels, mainly bored during the 19th and 20th centuries, are still used in France for commercial navigation and boating. The preservation of...