Rashmi A. Keswani
Rashmi A. Keswani has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Hiralal Muralidhar Suryawanshi
Department of Electrical Engineering, Visvesvaraya National Institute of Technology, Nagpur, India
2 shared publications Makarand Sudhakar Ballal
Department of Electrical Engineering Visvesvaraya National Institute of Technology Nagpur Maharashtra India
1 shared publicationMohan M. Renge
Department of Electrical Engineering, Shri Ramdeobaba College of Engineering and Management, Nagpur, Maharashtra, India
1 shared publication
Latest Publications
- Open Access
- 1 May 2015
- Published by Institution of Engineering and Technology (IET) in IET Power Electronics
- Vol. 8 (5) , 783-792
Multi‐resolution analysis for converter switch faults identification
Multilevel inverters (MLI) are extensively used in various fields and industrial applications. This study proposes a simple algorithm for detection and identification of switch faults in insulated gate bipolar transistors (IGBTs) of multilevel inverter feeding an induction motor drive. The effects on the system for switch shorted are more severe than the switch opened if no protective action is taken in time. A fast and novel fault identifier designed in this study is used not only for switch short fault but also for switch open fault by analysing the performance of MLI drive system using wavelet based multi‐resolution analysis (MRA). On occurrence of switch fault in inverter, the fault information appears in the signals in frequency region resulting in variation in the details of level of wavelet transform (WT). The instant of variation in the WT is correlated with the instant of fault. The voltage and current signals from the experimental setup were used as input for wavelet analysis to develop suitable feature vector that will act as signature to discriminate faulty system from healthy one. The experimental prototype of five level diode clamped multilevel inverter feeding an induction motor has been implemented to validate the fault analysis with simulated result.
- 1 May 2015
- Published by Institution of Engineering and Technology (IET) in IET Power Electronics
- Vol. 8 (5) , 783-792
Open AccessMulti‐resolution analysis for converter switch faults identification
Multilevel inverters (MLI) are extensively used in various fields and industrial applications. This study proposes a simple algorithm for detection and identification of switch faults in insulated gate bipolar transistors (IGBTs) of multilevel inverter feeding an induction motor drive. The effects on the system for switch shorted are more severe than the switch opened if no protective action is taken in time. A fast and novel fault identifier designed in this study is used not only for switch short fault but also for switch open fault by analysing the performance of MLI drive system using wavelet based multi‐resolution analysis (MRA). On occurrence of switch fault in inverter, the fault information appears in the signals in frequency region resulting in variation in the details of level of wavelet transform (WT). The instant of variation in the WT is correlated with the instant of fault. The voltage and current signals from the experimental setup were used as input for wavelet analysis to develop suitable feature vector that will act as signature to discriminate faulty system from healthy one. The experimental prototype of five level diode clamped multilevel inverter feeding an induction motor has been implemented to validate the fault analysis with simulated result.
- 28 May 2014
- Published by Taylor & Francis in Electric Power Components and Systems
- Vol. 42 (9) , 889-900
Wavelet Modulus Maxima for Single Switch Open Fault in Multi-level Inverter
The multi-level inverter is widely used in high-power and high-voltage applications. Multi-level inverters use a large number of switches for high power conversion, resulting in increased system's fault probability. To ensure stable operation of the system, several fault diagnosis methods have been carried out by researchers. In this article, a fault diagnostic system in a multi-level inverter using wavelet modulus maxima is developed. The working situation of the power devices of a five-level diode-clamped multi-level inverter drive system under an open-circuit fault is analyzed through MATLAB (The MathWorks, Natick, Massachusetts, USA) simulation. The wavelet modulus maxima of output phase voltages are used to detect faulty phase (leg), and wavelet modulus maxima of DC bus currents are used to detect fault type and fault switch. Wavelet analysis is used for feature extraction, which can be used as input to the expert system to develop a fault identifier. The open-circuit fault on the five-level diode-clamped multi-level inverter of power devices is carried out experimentally. The experimental prototype is developed to validate the fault analysis with simulation results.
- 28 May 2014
- Published by Taylor & Francis in Electric Power Components and Systems
- Vol. 42 (9) , 889-900
Wavelet Modulus Maxima for Single Switch Open Fault in Multi-level Inverter
The multi-level inverter is widely used in high-power and high-voltage applications. Multi-level inverters use a large number of switches for high power conversion, resulting in increased system's fault probability. To ensure stable operation of the system, several fault diagnosis methods have been carried out by researchers. In this article, a fault diagnostic system in a multi-level inverter using wavelet modulus maxima is developed. The working situation of the power devices of a five-level diode-clamped multi-level inverter drive system under an open-circuit fault is analyzed through MATLAB (The MathWorks, Natick, Massachusetts, USA) simulation. The wavelet modulus maxima of output phase voltages are used to detect faulty phase (leg), and wavelet modulus maxima of DC bus currents are used to detect fault type and fault switch. Wavelet analysis is used for feature extraction, which can be used as input to the expert system to develop a fault identifier. The open-circuit fault on the five-level diode-clamped multi-level inverter of power devices is carried out experimentally. The experimental prototype is developed to validate the fault analysis with simulation results.