Katsuhiro Hirata
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Katsuhiro Hirata has a total of 89 co-authors. Here are the top co-authors by number of shared publications:
- Noboru Niguchi
Osaka University
28 shared publications Noboru Niguchi
Hirata Labs., Department of Adaptive Machine Systems, Graduate School of Engineering, Osaka University
14 shared publications- Akira Heya
Nagoya University
10 shared publications - Masayuki Kato
Department of Electrical and Electronics Engineering, Ibaraki University, Hitachi, Japan
10 shared publications - Kazuaki Takahara
Department of Adaptive Machine Systems, Graduate School of Engineering, Osaka University, Osaka 5650871, Japan
6 shared publications Sanggook Lee
4 shared publications
Latest Publications
- 12 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 39 (2) , 795-804
Experimental Verification and Analysis of Six-Degree-of-Freedom Electromagnetic Actuator With Short-Stroke
Multiple-degree-of-freedom (DOF) positioning mechanisms and active damping devices are required six-DOF (6DOF) motion generation with 3DOF linear and 3DOF rotational motion. The conventional mechanisms consist of many linear and rotary actuators. This simple combination mechanisms make the structure more complex and increase in size. Then, a multi-DOF actuator that can be driven in 6DOF is expected to be realized. However, it is difficult due to the complexity of 6DOF support mechanism. To solve this problem, we propose a short-stroke 6DOF electromagnetic actuator by integrating a 6DOF elastic support mechanism using coil springs and an electromagnetic force generation mechanism. The proposed actuator that can generate 6DOF motion by only one actuator. This article describes a design and operating principle of the proposed actuator. The thrust and torque characteristics are investigated through a three-dimensional finite element method and experiments. It is clarified that the proposed actuator can generate torque and thrust. The dynamics is calculated using a dynamic model and are verified by experiments. The simulated and experimental results are compared, and the validity of the derived model is confirmed. The proposed 6ODF actuator has a simple structure, it is expected to contribute to the downsizing and simplification of multi-DOF mechanisms.
- 12 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 39 (2) , 795-804
Experimental Verification and Analysis of Six-Degree-of-Freedom Electromagnetic Actuator With Short-Stroke
Multiple-degree-of-freedom (DOF) positioning mechanisms and active damping devices are required six-DOF (6DOF) motion generation with 3DOF linear and 3DOF rotational motion. The conventional mechanisms consist of many linear and rotary actuators. This simple combination mechanisms make the structure more complex and increase in size. Then, a multi-DOF actuator that can be driven in 6DOF is expected to be realized. However, it is difficult due to the complexity of 6DOF support mechanism. To solve this problem, we propose a short-stroke 6DOF electromagnetic actuator by integrating a 6DOF elastic support mechanism using coil springs and an electromagnetic force generation mechanism. The proposed actuator that can generate 6DOF motion by only one actuator. This article describes a design and operating principle of the proposed actuator. The thrust and torque characteristics are investigated through a three-dimensional finite element method and experiments. It is clarified that the proposed actuator can generate torque and thrust. The dynamics is calculated using a dynamic model and are verified by experiments. The simulated and experimental results are compared, and the validity of the derived model is confirmed. The proposed 6ODF actuator has a simple structure, it is expected to contribute to the downsizing and simplification of multi-DOF mechanisms.
- Open Access
- 1 January 2022
- Published by Japan Society of Applied Electromagnetics and Mechanics in Journal of the Japan Society of Applied Electromagnetics and Mechanics
- Vol. 30 (2) , 191-196
Sensorless Position Control of Linear Electromagnetic Actuator for Gear Shift Unit
Conventional manual transmissions suffer from deterioration due to wear and reduced responsiveness. Therefore, a linear electromagnetic actuator (LEA) for gear shifting has been developed. Since the LEA is a direct drive, it prevents deterioration due to wear and has high responsiveness. In addition, this LEA has a high holding force by detent force at three points. In this paper, sensorless position estimation is performed to simplify the system. Since one coil is not energized during driving in this LEA, so the back-EMF of the unenergized phase can be measured. We propose a sensorless position estimation method that focuses on the variation of the magnetic flux linkage characteristics in the position change. The simulation results show that the sensorless position control is possible.
- 1 January 2022
- Published by Japan Society of Applied Electromagnetics and Mechanics in Journal of the Japan Society of Applied Electromagnetics and Mechanics
- Vol. 30 (2) , 191-196
Open AccessSensorless Position Control of Linear Electromagnetic Actuator for Gear Shift Unit
Conventional manual transmissions suffer from deterioration due to wear and reduced responsiveness. Therefore, a linear electromagnetic actuator (LEA) for gear shifting has been developed. Since the LEA is a direct drive, it prevents deterioration due to wear and has high responsiveness. In addition, this LEA has a high holding force by detent force at three points. In this paper, sensorless position estimation is performed to simplify the system. Since one coil is not energized during driving in this LEA, so the back-EMF of the unenergized phase can be measured. We propose a sensorless position estimation method that focuses on the variation of the magnetic flux linkage characteristics in the position change. The simulation results show that the sensorless position control is possible.
- Open Access
- 1 January 2022
- Published by Japan Society of Applied Electromagnetics and Mechanics in Journal of the Japan Society of Applied Electromagnetics and Mechanics
- Vol. 30 (2) , 111-116
Application of injection molding process coupled analysis of bonded magnet to cylindrical mold model
A bonded magnet is a permanent magnet molded by mixing magnetic powder and resin. Injection molding, one of the molding methods, has the advantage of greater freedom of shape than other molding methods, but it is difficult to understand the behavior of the resin during molding, resulting in variations in the density and magnetic properties of the molded product. Therefore, a coupled analysis method of the particle method and the magnetic moment method has been proposed to understand the resin behavior. In this study, we used this coupled analysis method to evaluate the behavior of resin during injection molding of bonded magnets in a cylindrical mold model with multiple injection ports placed at equal intervals.
- 1 January 2022
- Published by Japan Society of Applied Electromagnetics and Mechanics in Journal of the Japan Society of Applied Electromagnetics and Mechanics
- Vol. 30 (2) , 111-116
Open AccessApplication of injection molding process coupled analysis of bonded magnet to cylindrical mold model
A bonded magnet is a permanent magnet molded by mixing magnetic powder and resin. Injection molding, one of the molding methods, has the advantage of greater freedom of shape than other molding methods, but it is difficult to understand the behavior of the resin during molding, resulting in variations in the density and magnetic properties of the molded product. Therefore, a coupled analysis method of the particle method and the magnetic moment method has been proposed to understand the resin behavior. In this study, we used this coupled analysis method to evaluate the behavior of resin during injection molding of bonded magnets in a cylindrical mold model with multiple injection ports placed at equal intervals.
- Open Access
- 1 January 2022
- Published by Japan Society of Applied Electromagnetics and Mechanics in Journal of the Japan Society of Applied Electromagnetics and Mechanics
- Vol. 30 (2) , 185-190
Study on Reward Multidimensionality in Deep Reinforcement Learning of Spherical Synchronous Actuators
The spherical synchronous actuator can be driven in multiple-degrees-of-freedom by a single unit. This simplifies the mechanism and is expected to be applied to industrial robots. The position of the actuator is controlled using a torque map which is a torque data at each posture. However, there is a problem that the positional accuracy is degraded by measurement errors in the torque map and friction. To solve this problem, we propose a novel attitude control system for the spherical actuator using a deep reinforcement learning algorithm. The simulation results showed that the control system was successfully implemented without a torque map. The system was able to follow the step response within 0.1 seconds, and the steady-state deviation was less than 0.1 degrees.
- 1 January 2022
- Published by Japan Society of Applied Electromagnetics and Mechanics in Journal of the Japan Society of Applied Electromagnetics and Mechanics
- Vol. 30 (2) , 185-190
Open AccessStudy on Reward Multidimensionality in Deep Reinforcement Learning of Spherical Synchronous Actuators
The spherical synchronous actuator can be driven in multiple-degrees-of-freedom by a single unit. This simplifies the mechanism and is expected to be applied to industrial robots. The position of the actuator is controlled using a torque map which is a torque data at each posture. However, there is a problem that the positional accuracy is degraded by measurement errors in the torque map and friction. To solve this problem, we propose a novel attitude control system for the spherical actuator using a deep reinforcement learning algorithm. The simulation results showed that the control system was successfully implemented without a torque map. The system was able to follow the step response within 0.1 seconds, and the steady-state deviation was less than 0.1 degrees.
- Open Access
- 1 January 2022
- Published by Japan Society of Applied Electromagnetics and Mechanics in Journal of the Japan Society of Applied Electromagnetics and Mechanics
- Vol. 30 (2) , 203-209
Study of Deep Reinforcement Learning for Robust Control of Multi-Degree-of-Freedom Spherical Actuator
Multi-degree-of-freedom (multi-DOF) spherical actuators have been developed for the fields of robotics and industrial machines. We have proposed an outer rotor type three-DOF spherical actuator that can realize a high torque density. Each coil input current is calculated using a torque generating equation based on the torque constant matrix. The permanent magnet type actuators have a problem with generating unexpected cogging torque due to various manufacturing errors. Manufacturing errors mainly mean differences between the ideal dimensions at the motor design stage and the actual dimensions in mass production. In this case, the actuator would exceed the limitations of classical proportional-integral-differential (PID) controllers. Therefore, we propose a current compensator using reinforcement learning by introducing a deep neural network that is expected to improve the robustness of spherical actuators. This current compensator was applied to uncertainty problems such as manufacturing fluctuations of cogging torque.
- 1 January 2022
- Published by Japan Society of Applied Electromagnetics and Mechanics in Journal of the Japan Society of Applied Electromagnetics and Mechanics
- Vol. 30 (2) , 203-209
Open AccessStudy of Deep Reinforcement Learning for Robust Control of Multi-Degree-of-Freedom Spherical Actuator
Multi-degree-of-freedom (multi-DOF) spherical actuators have been developed for the fields of robotics and industrial machines. We have proposed an outer rotor type three-DOF spherical actuator that can realize a high torque density. Each coil input current is calculated using a torque generating equation based on the torque constant matrix. The permanent magnet type actuators have a problem with generating unexpected cogging torque due to various manufacturing errors. Manufacturing errors mainly mean differences between the ideal dimensions at the motor design stage and the actual dimensions in mass production. In this case, the actuator would exceed the limitations of classical proportional-integral-differential (PID) controllers. Therefore, we propose a current compensator using reinforcement learning by introducing a deep neural network that is expected to improve the robustness of spherical actuators. This current compensator was applied to uncertainty problems such as manufacturing fluctuations of cogging torque.
- Open Access
- 1 January 2022
- Published by Japan Society of Applied Electromagnetics and Mechanics in Journal of the Japan Society of Applied Electromagnetics and Mechanics
- Vol. 30 (2) , 179-184
Basic Study on AC Motor Drive Using Rotating Magnetic Field Excited on LC Ladder Circuit
In three-phase AC motors, three-phase AC voltage system is essential to generate a rotating magnetic field. Three-phase AC motors also require a three-phase inverter for variable speed and torque operation. In general, the number of switching devices used in three-phase inverter is not less than six and decreasing its number is difficult. This paper focuses on an LC ladder circuit consisting of linear inductors and capacitors. This paper presents a new operating method of the AC motor based on a propagating magnetic field. It is successfully excited by connecting one single-phase AC power supply to the end of the LC ladder circuit. The induction motor operated by the presented method produces torque as in general induction motors.
- 1 January 2022
- Published by Japan Society of Applied Electromagnetics and Mechanics in Journal of the Japan Society of Applied Electromagnetics and Mechanics
- Vol. 30 (2) , 179-184
Open AccessBasic Study on AC Motor Drive Using Rotating Magnetic Field Excited on LC Ladder Circuit
In three-phase AC motors, three-phase AC voltage system is essential to generate a rotating magnetic field. Three-phase AC motors also require a three-phase inverter for variable speed and torque operation. In general, the number of switching devices used in three-phase inverter is not less than six and decreasing its number is difficult. This paper focuses on an LC ladder circuit consisting of linear inductors and capacitors. This paper presents a new operating method of the AC motor based on a propagating magnetic field. It is successfully excited by connecting one single-phase AC power supply to the end of the LC ladder circuit. The induction motor operated by the presented method produces torque as in general induction motors.
- 16 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 57 (5) , 4675-4685
Triaxial Active Control Magnetic Bearing With Asymmetric Structure
A standard magnetic levitation system has several magnetic bearings (MBs) to levitate its rotor. However, the combined structure of MBs increases the systems axial length and size. To solve these problems, we propose a triaxial active control magnetic bearing (AMB) with an asymmetric structure. This study demonstrates the development of the proposed AMB using a prototype. Radial and thrust suspension force characteristics are shown and compared with analysis and measured results. Furthermore, a magnetic levitation test is conducted, and it shows that the rotor can levitate. In addition, stability against disturbances is evaluated using a sensitivity function, and loss characteristics when the rotor is rotated are measured and discussed.
- 16 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 57 (5) , 4675-4685
Triaxial Active Control Magnetic Bearing With Asymmetric Structure
A standard magnetic levitation system has several magnetic bearings (MBs) to levitate its rotor. However, the combined structure of MBs increases the systems axial length and size. To solve these problems, we propose a triaxial active control magnetic bearing (AMB) with an asymmetric structure. This study demonstrates the development of the proposed AMB using a prototype. Radial and thrust suspension force characteristics are shown and compared with analysis and measured results. Furthermore, a magnetic levitation test is conducted, and it shows that the rotor can levitate. In addition, stability against disturbances is evaluated using a sensitivity function, and loss characteristics when the rotor is rotated are measured and discussed.
- 3 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 58 (2) , 1-5
Numerical Analysis of Magnetic Soliton Excited on Nonlinear LC Ladder Circuit Array Using Permanent Magnet Flux Biased Inductor
A soliton is a unique wave that maintains its shape and constant velocity. It has been observed widely in natural nonlinear systems. In particular, a magnetic soliton has been observed experimentally on a nonlinear LC ladder circuit array. The aim of this article is to excite a magnetic soliton on the LC ladder circuit array using a permanent-magnet-flux-biased (PMFB) inductor. Electromagnetic analysis reveals that the PMFB inductor has exponential inductance characteristics due to the effective use of magnetic saturation in the stator core. Four PMFB inductors with different magnetic circuit topologies are analyzed and compared, to decrease the inductor current. Finally, this article numerically solves the loop equation for the LC ladder circuit array and shows that the magnetic soliton is successfully excited and propagates without changing its shape and velocity. This technique is equivalent to a rotating magnetic field and has a great potential in developing new ac motors or actuators.
- 3 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 58 (2) , 1-5
Numerical Analysis of Magnetic Soliton Excited on Nonlinear LC Ladder Circuit Array Using Permanent Magnet Flux Biased Inductor
A soliton is a unique wave that maintains its shape and constant velocity. It has been observed widely in natural nonlinear systems. In particular, a magnetic soliton has been observed experimentally on a nonlinear LC ladder circuit array. The aim of this article is to excite a magnetic soliton on the LC ladder circuit array using a permanent-magnet-flux-biased (PMFB) inductor. Electromagnetic analysis reveals that the PMFB inductor has exponential inductance characteristics due to the effective use of magnetic saturation in the stator core. Four PMFB inductors with different magnetic circuit topologies are analyzed and compared, to decrease the inductor current. Finally, this article numerically solves the loop equation for the LC ladder circuit array and shows that the magnetic soliton is successfully excited and propagates without changing its shape and velocity. This technique is equivalent to a rotating magnetic field and has a great potential in developing new ac motors or actuators.
- Open Access
- 22 March 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (6) , 2818
Improvement of Torque Performance and Energy Density of PM-Type Vernier Motor Utilizing Saddle Coil and Salient Pole
In electric motors, the use of rare-earth magnets has been increasing rapidly. A stronger magnet force of the magnet enables the motor’s higher performance, resulting in the most high-performance motors generally using rare-earth magnets. However, these magnets have two crucial disadvantages: the potential restrictions on the supply of rare-earth magnetic materials and the sharp fluctuation in price. Thus, many recent researches focus on developing high-performance electric motors and reducing the use of critical rare-earth magnets. By increasing the torque density of the motor, we can reduce the use of permanent magnets. Focusing on this point, and we presented a double half permanent magnet (DHPM)-type vernier motor. This paper proposed a new saddle coil permanent magnet vernier motor with improved performance compared to its predecessor. The main feature of the proposed motor is that the permanent magnet and coil in the stator of a DHPM-type vernier motor is replaced by salient poles and saddle coils, respectively. We also investigate its characteristics through various simulations.
- 22 March 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (6) , 2818
Open AccessImprovement of Torque Performance and Energy Density of PM-Type Vernier Motor Utilizing Saddle Coil and Salient Pole
In electric motors, the use of rare-earth magnets has been increasing rapidly. A stronger magnet force of the magnet enables the motor’s higher performance, resulting in the most high-performance motors generally using rare-earth magnets. However, these magnets have two crucial disadvantages: the potential restrictions on the supply of rare-earth magnetic materials and the sharp fluctuation in price. Thus, many recent researches focus on developing high-performance electric motors and reducing the use of critical rare-earth magnets. By increasing the torque density of the motor, we can reduce the use of permanent magnets. Focusing on this point, and we presented a double half permanent magnet (DHPM)-type vernier motor. This paper proposed a new saddle coil permanent magnet vernier motor with improved performance compared to its predecessor. The main feature of the proposed motor is that the permanent magnet and coil in the stator of a DHPM-type vernier motor is replaced by salient poles and saddle coils, respectively. We also investigate its characteristics through various simulations.
- 19 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 57 (6) , 1-4
Analysis Accuracy in Positioning Calculation for Three-Degree-of-Freedom Spherical Actuator
Multi-degree-of-freedom (multi-DOF) spherical actuators have been developed for the fields of robotics and industrial machinery. We have proposed an outer rotor type three-DOF spherical actuator that can realize a high torque density. Each coil input current is calculated using a torque generating equation based on the torque constant matrix. Although a control method to calculate the current has already been proposed, the analysis accuracy of the torque model is not sufficiently examined for a precision robot that requires a positioning accuracy of 1 mm or less. In order to apply our three-DOF spherical actuator to such a precision robot, we have developed a dynamic analysis method that directly positions the robot. In this paper, we report on the factors that affect the analysis accuracy and accuracy improvement.
- 19 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 57 (6) , 1-4
Analysis Accuracy in Positioning Calculation for Three-Degree-of-Freedom Spherical Actuator
Multi-degree-of-freedom (multi-DOF) spherical actuators have been developed for the fields of robotics and industrial machinery. We have proposed an outer rotor type three-DOF spherical actuator that can realize a high torque density. Each coil input current is calculated using a torque generating equation based on the torque constant matrix. Although a control method to calculate the current has already been proposed, the analysis accuracy of the torque model is not sufficiently examined for a precision robot that requires a positioning accuracy of 1 mm or less. In order to apply our three-DOF spherical actuator to such a precision robot, we have developed a dynamic analysis method that directly positions the robot. In this paper, we report on the factors that affect the analysis accuracy and accuracy improvement.