Achour Ouslimani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Achour Ouslimani has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Abed-Elhak Kasbari
Quartz Laboratory, Department of Electrical and Electronic Engineering, Ecole Nationale Supérieure de l’Electronique et de ses Applications, 95014 Cergy, France
3 shared publications - Chemseddine Benkalfate
Quartz Laboratory, Department of Electrical and Electronic Engineering, Ecole Nationale Supérieure de l’Electronique et de ses Applications, 95014 Cergy, France
2 shared publications - Mohammed Feham
STIC Laboratory, Department of Telecommunications, Faculty of Technology, University Abou Bekr Belkaid, Tlemcen BP 230 13000, Algeria
2 shared publications - A. Mesloub
Laboratoire Traitement du signal, École Militaire Polytechnique, Algiers, Algeria
1 shared publication - Abdallah Al Ghazi
Quartz Laboratory, Department of Electrical and Electronic Engineering, Ecole Nationale Supérieure de l’Electronique et de ses Applications, Ensea, 6 Avenue du Ponceau, 95014 Cergy, France
1 shared publication - Abdelkader Senouci
Northumbria University
1 shared publication
Latest Publications
- Open Access
Advances in Interface Circuits for Self-Powered Piezoelectric Energy Harvesting Systems: A Comprehensive Review
This paper presents a comprehensive summary of recent advances in circuit topologies for piezoelectric energy harvesting, leading to self-powered systems (SPSs), covering the full-bridge rectifier (FBR) and half-bridge rectifier (HBR), AC-DC converters, and maximum power point tracking (MPPT) techniques. These approaches are analyzed with respect to their advantages, limitations, and overall impact on energy harvesting efficiency. Th work explores alternative methods that leverage phase shifting between voltage and current waveform components to enhance conversion performance. Additionally, it provides detailed insights into advanced design strategies, including adaptive power management algorithms, low-power control techniques, and complex impedance matching. The paper also addresses the fundamental principles and challenges of converting mechanical vibrations into electrical energy. Experimental results and performance metrics are reviewed, particularly in relation to hybrid approaches, load impedance, vibration frequency, and power conditioning requirements in energy harvesting systems. This review aims to provide researchers and engineers with a critical understanding of the current state of the art, key challenges, and emerging opportunities in piezoelectric energy harvesting. By examining recent developments, it offers valuable insights into optimizing interface circuit design for the development of efficient and self-sustaining piezoelectric energy harvesting systems.
Open AccessAdvances in Interface Circuits for Self-Powered Piezoelectric Energy Harvesting Systems: A Comprehensive Review
This paper presents a comprehensive summary of recent advances in circuit topologies for piezoelectric energy harvesting, leading to self-powered systems (SPSs), covering the full-bridge rectifier (FBR) and half-bridge rectifier (HBR), AC-DC converters, and maximum power point tracking (MPPT) techniques. These approaches are analyzed with respect to their advantages, limitations, and overall impact on energy harvesting efficiency. Th work explores alternative methods that leverage phase shifting between voltage and current waveform components to enhance conversion performance. Additionally, it provides detailed insights into advanced design strategies, including adaptive power management algorithms, low-power control techniques, and complex impedance matching. The paper also addresses the fundamental principles and challenges of converting mechanical vibrations into electrical energy. Experimental results and performance metrics are reviewed, particularly in relation to hybrid approaches, load impedance, vibration frequency, and power conditioning requirements in energy harvesting systems. This review aims to provide researchers and engineers with a critical understanding of the current state of the art, key challenges, and emerging opportunities in piezoelectric energy harvesting. By examining recent developments, it offers valuable insights into optimizing interface circuit design for the development of efficient and self-sustaining piezoelectric energy harvesting systems.
- 1 August 2023
- Published by Pleiades Publishing Ltd in Journal of Communications Technology and Electronics
- Vol. 68 (8) , 903-909
Modeling and Analysis of a Novel Chaotic Oscillator up to 7.5 GHz
In this paper, we present a novel chaotic oscillator based mainly on two identical improved Colpitts oscillator coupled to each other. The mathematical model of this proposed chaotic circuit as solved under MATLAB simulator to observe chaotic behavior. For confirm this mathematical model, the oscillator circuit was simulated under ADS simulator, where the results also showed that the proposed chaotic oscillator can generate chaotic oscillation up to 7.5 GHz with a maximal value of the fundamental frequency equal to 0.28fT.
- 1 August 2023
- Published by Pleiades Publishing Ltd in Journal of Communications Technology and Electronics
- Vol. 68 (8) , 903-909
Modeling and Analysis of a Novel Chaotic Oscillator up to 7.5 GHz
In this paper, we present a novel chaotic oscillator based mainly on two identical improved Colpitts oscillator coupled to each other. The mathematical model of this proposed chaotic circuit as solved under MATLAB simulator to observe chaotic behavior. For confirm this mathematical model, the oscillator circuit was simulated under ADS simulator, where the results also showed that the proposed chaotic oscillator can generate chaotic oscillation up to 7.5 GHz with a maximal value of the fundamental frequency equal to 0.28fT.
- Open Access
A New Compact Triple-Band Triangular Patch Antenna for RF Energy Harvesting Applications in IoT Devices
This work proposes a new compact triple-band triangular patch antenna for RF energy harvesting applications in IoT devices. It is realized on Teflon glass substrate with a thickness of 0.67 mm and a relative permittivity of 2.1. Four versions of this antenna have been designed and realized with inclinations of 0°, 30°, 60° and 90° to study the impact of the tilting on their characteristics (S11 parameter, radiation pattern, gain) and to explore the possibilities of their implementation in the architectures of electronic equipment according to the available space. The antenna is also realized on waterproof paper with a thickness of 0.1 mm and a relative permittivity of 1.4 for biomedical domain. All the antennas (vertical antenna, tilted antennas and antenna realized on waterproof paper) have a size of 39 × 9 mm2 and cover the 2.45 GHz and 5.2 GHz Wi-Fi bands and the 8.2 GHz band. A good agreement is obtained between measured and simulated results. Radiation patterns show that all the antennas are omnidirectional for 2.45 GHz and pseudo-omnidirectional for 5.2 GHz and 8.2 GHz with maximum measured gains of 2.6 dBi, 4.55 dBi and 6 dBi, respectively. The maximum measured radiation efficiencies for the three antenna configurations are, respectively, of 75%, 70% and 72%. The Specific Absorption Rate (SAR) for the antenna bound on the human body is of 1.1 W/kg, 0.71 W/kg and 0.45 W/kg, respectively, for the three frequencies 2.45 GHz, 5.2 GHz and 8.2 GHz. All these antennas are then applied to realize RF energy harvesting systems. These systems are designed, realized and tested for the frequency 2.45 GHz, −20 dBm input power and 2 kΩ resistance load. The maximum measured output DC power is of 7.68 µW with a maximum RF-to-DC conversion efficiency of 77%.
Open AccessA New Compact Triple-Band Triangular Patch Antenna for RF Energy Harvesting Applications in IoT Devices
This work proposes a new compact triple-band triangular patch antenna for RF energy harvesting applications in IoT devices. It is realized on Teflon glass substrate with a thickness of 0.67 mm and a relative permittivity of 2.1. Four versions of this antenna have been designed and realized with inclinations of 0°, 30°, 60° and 90° to study the impact of the tilting on their characteristics (S11 parameter, radiation pattern, gain) and to explore the possibilities of their implementation in the architectures of electronic equipment according to the available space. The antenna is also realized on waterproof paper with a thickness of 0.1 mm and a relative permittivity of 1.4 for biomedical domain. All the antennas (vertical antenna, tilted antennas and antenna realized on waterproof paper) have a size of 39 × 9 mm2 and cover the 2.45 GHz and 5.2 GHz Wi-Fi bands and the 8.2 GHz band. A good agreement is obtained between measured and simulated results. Radiation patterns show that all the antennas are omnidirectional for 2.45 GHz and pseudo-omnidirectional for 5.2 GHz and 8.2 GHz with maximum measured gains of 2.6 dBi, 4.55 dBi and 6 dBi, respectively. The maximum measured radiation efficiencies for the three antenna configurations are, respectively, of 75%, 70% and 72%. The Specific Absorption Rate (SAR) for the antenna bound on the human body is of 1.1 W/kg, 0.71 W/kg and 0.45 W/kg, respectively, for the three frequencies 2.45 GHz, 5.2 GHz and 8.2 GHz. All these antennas are then applied to realize RF energy harvesting systems. These systems are designed, realized and tested for the frequency 2.45 GHz, −20 dBm input power and 2 kΩ resistance load. The maximum measured output DC power is of 7.68 µW with a maximum RF-to-DC conversion efficiency of 77%.
- Open Access
A New RF Energy Harvesting System Based on Two Architectures to Enhance the DC Output Voltage for WSN Feeding
In this paper, a new RF Energy Harvesting (RF-EH) system for Wireless Sensor Network (WSN) feeding is proposed. It is based on two different monitored architectures using switch circuits controlled by the input powers. One architecture is more adapted to high input powers and the other to low input powers. The two different architectures and the system are designed and realized on Teflon glass substrate with a relative permittivity of 2.1 and thickness of 0.67 mm. They are tested separately as a function of the distance from the relay antenna. A new multiband antenna with a size of 40 × 30 mm2 is used for both architectures and the system. The measured antenna gains are 2.7 dB, 2.9 dB, and 2.55 dB for the frequencies of 1.8 GHz, 2.1 GHz, and 2.66 GHz corresponding to the mobile communication networks, respectively. The rectifier consists of two Schottky diodes forming a full-wave rectifier and voltage doubler. The maximum measured RF-to-DC conversion efficiency is 71.5%. The proposed RF-EH system provides a maximum DC output voltage of 5.6 V and 3.15 V for an open and 2 kΩ resistance load, respectively.
Open AccessA New RF Energy Harvesting System Based on Two Architectures to Enhance the DC Output Voltage for WSN Feeding
In this paper, a new RF Energy Harvesting (RF-EH) system for Wireless Sensor Network (WSN) feeding is proposed. It is based on two different monitored architectures using switch circuits controlled by the input powers. One architecture is more adapted to high input powers and the other to low input powers. The two different architectures and the system are designed and realized on Teflon glass substrate with a relative permittivity of 2.1 and thickness of 0.67 mm. They are tested separately as a function of the distance from the relay antenna. A new multiband antenna with a size of 40 × 30 mm2 is used for both architectures and the system. The measured antenna gains are 2.7 dB, 2.9 dB, and 2.55 dB for the frequencies of 1.8 GHz, 2.1 GHz, and 2.66 GHz corresponding to the mobile communication networks, respectively. The rectifier consists of two Schottky diodes forming a full-wave rectifier and voltage doubler. The maximum measured RF-to-DC conversion efficiency is 71.5%. The proposed RF-EH system provides a maximum DC output voltage of 5.6 V and 3.15 V for an open and 2 kΩ resistance load, respectively.
- 1 December 2021
- Published by Pleiades Publishing Ltd in Journal of Communications Technology and Electronics
- Vol. 66 (S2) , S194-S200
GoF Based Chaotic On-Off Keying: A New Non-Coherent Modulation for Direct Chaotic Communication
The present paper proposes a new non coherent modulation scheme, called GoF based Chaotic On-off Keying (GoF-COOK). The proposed method deals with the “Nonzero threshold problem” caused by the bit energy variation of the chaotic signals. The main originality of the proposed method, consists of transforming the non-coherent demodulation problem to a classical binary hypothesis test, then applying the Goodness of Fit algorithms to solve the binary detection problem. Analytical expression for the theoretical error probability is derived and simulation results highlights the effectiveness of the proposed GoF-COOK.
- 1 December 2021
- Published by Pleiades Publishing Ltd in Journal of Communications Technology and Electronics
- Vol. 66 (S2) , S194-S200
GoF Based Chaotic On-Off Keying: A New Non-Coherent Modulation for Direct Chaotic Communication
The present paper proposes a new non coherent modulation scheme, called GoF based Chaotic On-off Keying (GoF-COOK). The proposed method deals with the “Nonzero threshold problem” caused by the bit energy variation of the chaotic signals. The main originality of the proposed method, consists of transforming the non-coherent demodulation problem to a classical binary hypothesis test, then applying the Goodness of Fit algorithms to solve the binary detection problem. Analytical expression for the theoretical error probability is derived and simulation results highlights the effectiveness of the proposed GoF-COOK.
- 23 July 2014
- Published by Springer Nature in Circuits, Systems, and Signal Processing
- Vol. 34 (2) , 393-418
Robust Chaotic Communication Based on Indirect Coupling Synchronization
- 23 July 2014
- Published by Springer Nature in Circuits, Systems, and Signal Processing
- Vol. 34 (2) , 393-418
Robust Chaotic Communication Based on Indirect Coupling Synchronization
- 14 March 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 55 (2) , 614-624
Feasibility of Analog Realization of a Sliding-Mode Observer: Application to Data Transmission
One of the main contributions of this paper is to highlight the feasibility of analog realization of a chaotic observer-based communication system. The system is composed of a chaotic Colpitts oscillator considered as transmitter and a sliding-mode observer used as receiver. The method used in this realization is based on the synchronization of two chaotic systems (transmitter-receiver). Moreover, another originality of this work is the application of a sliding-mode observer to a Colpitts oscillator, which has a totally different structure with respect to it. Nevertheless, the proposed structure of the observer is designed particularly for this type of oscillator. Only one of the states of the transmitter (chosen according to theoretical criteria) is sent to the receiver which is designed to reconstruct all of the states of the transmitter knowing only the transmitted state. In order to show an application of this work, a message signal is injected into the transmitter using the so-called inclusion method. The message is then recovered by the receiver once all of the transmitter states are reconstructed. Thus, the so-called left inversion problem is resolved experimentally. The whole system (transmitter-observer) is realized using simple and standard analog components, and practical results close to simulations are obtained.
- 14 March 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 55 (2) , 614-624
Feasibility of Analog Realization of a Sliding-Mode Observer: Application to Data Transmission
One of the main contributions of this paper is to highlight the feasibility of analog realization of a chaotic observer-based communication system. The system is composed of a chaotic Colpitts oscillator considered as transmitter and a sliding-mode observer used as receiver. The method used in this realization is based on the synchronization of two chaotic systems (transmitter-receiver). Moreover, another originality of this work is the application of a sliding-mode observer to a Colpitts oscillator, which has a totally different structure with respect to it. Nevertheless, the proposed structure of the observer is designed particularly for this type of oscillator. Only one of the states of the transmitter (chosen according to theoretical criteria) is sent to the receiver which is designed to reconstruct all of the states of the transmitter knowing only the transmitted state. In order to show an application of this work, a message signal is injected into the transmitter using the so-called inclusion method. The message is then recovered by the receiver once all of the transmitter states are reconstructed. Thus, the so-called left inversion problem is resolved experimentally. The whole system (transmitter-observer) is realized using simple and standard analog components, and practical results close to simulations are obtained.