Duraisamy Jeyakumar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Duraisamy Jeyakumar has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Veeman Sannasi
Functional Materials Division CSIR-Central Electrochemical Research Institute Karaikudi- 630 006 India
5 shared publications - P. Anandha Ganesh
State Key Laboratory for Mechanical Behavior of Materials, School of Materials Science and Engineering, Xi'an Jiaotong University, Xi'an, China
2 shared publications Avaninathan Sivanantha Raja
Alagappa Chettiar College of Engineering and Technology Karaikudi Tamilnadu India
1 shared publicationChinnappanadar Sanjeeviraja
Alagappa Chettiar College of Engineering and Technology Karaikudi Tamilnadu India
1 shared publication- Govindhan Maduraiveeran
Research Institute and Department of Chemistry SRM Institute of Science and Technology 603 203 Chennai Tamil Nadu India
1 shared publication - Manickam Sasidharan
SRM Institute of Science and Technology
1 shared publication
Latest Publications
- 12 August 2018
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 2018 (35) , 3978-3984
Surface‐Roughened Pt‐Decorated Pd Nanoparticles as Efficient Electrocatalysts for Direct Alcohol Fuel Cells
Platinum‐decorated Pd nanoparticles (NPs) of Pd100–xPtx (x = 30, 40 and 50) are synthesised by galvanic replacement of Ag by Pt using a Pd@Ag core–shell structure as a template. The Pd@Ag core–shell material is prepared by chemical reduction of Ag+ over Pd NPs, with further Ag being galvanically replaced by Pt to form Pd100–xPtx NPs. The Pd100–xPtx NPs are characterised using optical absorption spectroscopy with surface plasmon resonance (SPR), transmission electron microscopy (TEM) and high resolution TEM (HRTEM). The NPs are adsorbed onto vulcan carbon (Pd100–xPtx/C) for further characterisation and electrochemical studies. The materials are characterised using powder X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV) studies. The CV studies indicate the absence of silver in the synthesised materials. The electrochemical oxidation of methanol and ethanol are carried out by cyclic voltammetry studies. The results show that Pd100–xPtx/C materials are good catalysts for methanol oxidation reactions (MORs) and ethanol oxidation reactions (EORs), with lower oxidation potentials and higher mass activities than commercial Pt/C catalysts. Among these materials, Pd50Pt50/C has a methanol oxidation potential of 0.18 V, with good mass activity, and the Pd70Pt30/C material is an efficient EOR catalyst, with higher mass activity than commercial Pt/C catalysts.
- 12 August 2018
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 2018 (35) , 3978-3984
Surface‐Roughened Pt‐Decorated Pd Nanoparticles as Efficient Electrocatalysts for Direct Alcohol Fuel Cells
Platinum‐decorated Pd nanoparticles (NPs) of Pd100–xPtx (x = 30, 40 and 50) are synthesised by galvanic replacement of Ag by Pt using a Pd@Ag core–shell structure as a template. The Pd@Ag core–shell material is prepared by chemical reduction of Ag+ over Pd NPs, with further Ag being galvanically replaced by Pt to form Pd100–xPtx NPs. The Pd100–xPtx NPs are characterised using optical absorption spectroscopy with surface plasmon resonance (SPR), transmission electron microscopy (TEM) and high resolution TEM (HRTEM). The NPs are adsorbed onto vulcan carbon (Pd100–xPtx/C) for further characterisation and electrochemical studies. The materials are characterised using powder X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV) studies. The CV studies indicate the absence of silver in the synthesised materials. The electrochemical oxidation of methanol and ethanol are carried out by cyclic voltammetry studies. The results show that Pd100–xPtx/C materials are good catalysts for methanol oxidation reactions (MORs) and ethanol oxidation reactions (EORs), with lower oxidation potentials and higher mass activities than commercial Pt/C catalysts. Among these materials, Pd50Pt50/C has a methanol oxidation potential of 0.18 V, with good mass activity, and the Pd70Pt30/C material is an efficient EOR catalyst, with higher mass activity than commercial Pt/C catalysts.
- 29 September 2017
- Published by Wiley in ChemistrySelect
- Vol. 2 (28) , 9130-9135
Synthesis of Aziridinofullerene‐Porphyrin Mediated by Triethyl Phosphite: Physicochemical and Electrochemical Properties
Aziridinofullerene‐porphyrin (C 60 ‐TPP) dyad was synthesized using triethyl phosphite mediated [2+1] cycloaddition reaction. Structural elucidation of the compound was carried out using NMR and FT‐IR spectroscopic methods. The synthesized C 60 ‐TPP was further characterized using UV‐Vis absorption and photoluminescence emission studies. An optical study of the synthesized compound shows absorption maxima at 424 nm, around 516, 550, and 593 nm with small broad absorption peaks at 360 and at 480 nm. Photoluminescence studies of the compound shows emission maxima at around 597, 652 and 717 nm. Electrochemical studies of the compound shows oxidation potentials at 0.30, 0.52, 0.74 V and reduction potentials at−1.69,−2.07 and−2.42 V with respect to internal Fc/Fc + reference corresponding to porphyrin and fullerene C 60 moiety in the compound and the formation of C 60 ‐TPP. Furthermore, the absence of obtain XPS peaks corresponding to nitro group in C 60 ‐TPP confirms the conversion of nitro group to aziridine group.
- 29 September 2017
- Published by Wiley in ChemistrySelect
- Vol. 2 (28) , 9130-9135
Synthesis of Aziridinofullerene‐Porphyrin Mediated by Triethyl Phosphite: Physicochemical and Electrochemical Properties
Aziridinofullerene‐porphyrin (C 60 ‐TPP) dyad was synthesized using triethyl phosphite mediated [2+1] cycloaddition reaction. Structural elucidation of the compound was carried out using NMR and FT‐IR spectroscopic methods. The synthesized C 60 ‐TPP was further characterized using UV‐Vis absorption and photoluminescence emission studies. An optical study of the synthesized compound shows absorption maxima at 424 nm, around 516, 550, and 593 nm with small broad absorption peaks at 360 and at 480 nm. Photoluminescence studies of the compound shows emission maxima at around 597, 652 and 717 nm. Electrochemical studies of the compound shows oxidation potentials at 0.30, 0.52, 0.74 V and reduction potentials at−1.69,−2.07 and−2.42 V with respect to internal Fc/Fc + reference corresponding to porphyrin and fullerene C 60 moiety in the compound and the formation of C 60 ‐TPP. Furthermore, the absence of obtain XPS peaks corresponding to nitro group in C 60 ‐TPP confirms the conversion of nitro group to aziridine group.
- 7 September 2017
- Published by Springer Nature in Polymer Bulletin
- Vol. 75 (6) , 2687-2705
Effect of appended porphyrin in poly(fluorene-alt-benzothiadiazole): synthesis, characterization, physico-chemical and electrochemical studies
- 7 September 2017
- Published by Springer Nature in Polymer Bulletin
- Vol. 75 (6) , 2687-2705
Effect of appended porphyrin in poly(fluorene-alt-benzothiadiazole): synthesis, characterization, physico-chemical and electrochemical studies
- 24 April 2017
- Published by Wiley in ChemistrySelect
- Vol. 2 (12) , 3562-3571
Intriguing Catalytic Activity of Surface Active Gold‐Platinum Islands on Nano‐Porous Au in Determining Efficient Direct Formic Acid Oxidation Pathway
Gold‐platinum nano‐porous structures (Au 100‐x Pt x NPoS) with unique surface enriched Au−Pt islands are synthesised through a galvanic replacement strategy from Au 100‐x Ag 2x nano‐alloys with ultra‐low platinum loading (x=1.25, 2.5 and 5). Formic acid oxidation reaction (FAOR) on Au 100‐x Pt x /C NPoS shows a distinct peak at around 0.5 V related to CO 2 formation. A characteristic peak at around 1.5 V increases with increasing FA concentration owing to the direct FAOR by nano‐porous Au centers. FAOR peaks and I f /I b peak current ratios indicates that, Au 100‐x Pt x /C NPoS facilitates direct FAOR pathway unlike HiSPEC Pt/C (dehydration pathway). Based on the enhanced chrono‐amperometric response, Tafel behaviour and mass activity values, Au 97.5 Pt 2.5 /C NPoS (5.5 A/mg Pt ) reflects as the optimal catalyst for efficient FAOR. The intriguing catalytic role of surface enriched Au−Pt islands present on nano‐porous Au greatly helps in determining the superior FAOR activity in Au 97.5 Pt 2.5 /C NPoS towards direct dehydrogenation pathway at ultra‐low Pt content compared to other NPoS and HiSPEC Pt/C catalysts.
- 24 April 2017
- Published by Wiley in ChemistrySelect
- Vol. 2 (12) , 3562-3571
Intriguing Catalytic Activity of Surface Active Gold‐Platinum Islands on Nano‐Porous Au in Determining Efficient Direct Formic Acid Oxidation Pathway
Gold‐platinum nano‐porous structures (Au 100‐x Pt x NPoS) with unique surface enriched Au−Pt islands are synthesised through a galvanic replacement strategy from Au 100‐x Ag 2x nano‐alloys with ultra‐low platinum loading (x=1.25, 2.5 and 5). Formic acid oxidation reaction (FAOR) on Au 100‐x Pt x /C NPoS shows a distinct peak at around 0.5 V related to CO 2 formation. A characteristic peak at around 1.5 V increases with increasing FA concentration owing to the direct FAOR by nano‐porous Au centers. FAOR peaks and I f /I b peak current ratios indicates that, Au 100‐x Pt x /C NPoS facilitates direct FAOR pathway unlike HiSPEC Pt/C (dehydration pathway). Based on the enhanced chrono‐amperometric response, Tafel behaviour and mass activity values, Au 97.5 Pt 2.5 /C NPoS (5.5 A/mg Pt ) reflects as the optimal catalyst for efficient FAOR. The intriguing catalytic role of surface enriched Au−Pt islands present on nano‐porous Au greatly helps in determining the superior FAOR activity in Au 97.5 Pt 2.5 /C NPoS towards direct dehydrogenation pathway at ultra‐low Pt content compared to other NPoS and HiSPEC Pt/C catalysts.
- 13 February 2017
- Published by Wiley in ChemistrySelect
- Vol. 2 (5) , 1992-1998
Effect of Co–monomers on Triphenylamine‐Thiazolothiazole‐Based Donor‐Acceptor Copolymers: Synthesis and their Optical Properties
Donor‐Acceptor type copolymer, poly(9,9‐di‐n‐hexylfluorene‐ alt ‐2,5‐bis( N,N ‐diphenylaniline)‐thiazolo[5,4‐ d ]thiazole) (P1) and random copolymers of P2‐P4 have been synthesized using Suzuki polymerization reaction. For random copolymers, dicyanomethane derivative of triphenylamine, dithienothiophene and thienothiophene were used as co‐monomers, respectively to P2‐P4 along fluorene and 2,5‐bis( N,N ‐diphenylaniline)‐thiazolo[5,4‐ d ]thiazole). Studies on the optical, thermal and electrochemical properties of these copolymers (P1‐P4) were carried out. By incorporating different aromatic moiety as co‐monomer, optical properties of the polymers were tuned which exhibited significant changes in UV‐Vis absorption as well as emission characteristics. All these copolymers were thermally stable upto 300 °C and soluble in common organic solvents. Electrochemical studies of these polymers indicate that they have deep HOMO energy levels. Photoluminescence emission studies of the synthesized polymers as thin film showed that polymer (P2) with dicyanomethane derivative of triphenylamine was red shifted when compared with other polymers. Weight average moleular weights of the polymers were in the range of 6.457 KDa to 12.000 KDa.
- 13 February 2017
- Published by Wiley in ChemistrySelect
- Vol. 2 (5) , 1992-1998
Effect of Co–monomers on Triphenylamine‐Thiazolothiazole‐Based Donor‐Acceptor Copolymers: Synthesis and their Optical Properties
Donor‐Acceptor type copolymer, poly(9,9‐di‐n‐hexylfluorene‐ alt ‐2,5‐bis( N,N ‐diphenylaniline)‐thiazolo[5,4‐ d ]thiazole) (P1) and random copolymers of P2‐P4 have been synthesized using Suzuki polymerization reaction. For random copolymers, dicyanomethane derivative of triphenylamine, dithienothiophene and thienothiophene were used as co‐monomers, respectively to P2‐P4 along fluorene and 2,5‐bis( N,N ‐diphenylaniline)‐thiazolo[5,4‐ d ]thiazole). Studies on the optical, thermal and electrochemical properties of these copolymers (P1‐P4) were carried out. By incorporating different aromatic moiety as co‐monomer, optical properties of the polymers were tuned which exhibited significant changes in UV‐Vis absorption as well as emission characteristics. All these copolymers were thermally stable upto 300 °C and soluble in common organic solvents. Electrochemical studies of these polymers indicate that they have deep HOMO energy levels. Photoluminescence emission studies of the synthesized polymers as thin film showed that polymer (P2) with dicyanomethane derivative of triphenylamine was red shifted when compared with other polymers. Weight average moleular weights of the polymers were in the range of 6.457 KDa to 12.000 KDa.
- 23 January 2017
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 53 (14) , 2245-2248
Electrochemical cycling and beyond: unrevealed activation of MoO3 for electrochemical hydrogen evolution reactions
Electrochemical cycling-induced reduction of α-MoO3 to monoclinic molybdenum dioxide and molybdenum sub-oxides with excellent electrochemical HER activity has been demonstrated.
- 23 January 2017
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 53 (14) , 2245-2248
Electrochemical cycling and beyond: unrevealed activation of MoO3 for electrochemical hydrogen evolution reactions
Electrochemical cycling-induced reduction of α-MoO3 to monoclinic molybdenum dioxide and molybdenum sub-oxides with excellent electrochemical HER activity has been demonstrated.
- 1 September 2016
- Published by Springer Nature in Iranian Polymer Journal
- Vol. 25 (10) , 831-840
Synthesis and characterization of polyphenylene vinylenes having m-terphenyl group: comparison of their optical properties
- 1 September 2016
- Published by Springer Nature in Iranian Polymer Journal
- Vol. 25 (10) , 831-840
Synthesis and characterization of polyphenylene vinylenes having m-terphenyl group: comparison of their optical properties
- Open Access
- 21 July 2016
- Published by Taylor & Francis in Designed Monomers and Polymers
- Vol. 19 (8) , 719-729
Synthesis of porphyrin-appended poly(fluorene-alt-carbazole): photoluminescent and electrochemical studies
Poly(fluorene-alt-carbazole) appended with meso-tetraphenylporphyrin (MTPPC) linked through oxyethylene spacer and the parent poly(N-hexyl-2,7-carbazole-alt-9,9-di-n-hexyl fluorene) (P1) were synthesized and characterized. Optical absorption properties of the polymers containing 5% of MTPPC (P2) and 10% of MTPPC (P3) in the polymer backbone show extended optical absorption toward long wavelength compared to the parent polymer P1. Optical absorption studies of the polymers showed that polymer P1 has absorption at 384 nm in solution, whereas polymers P2 and P3 have absorption at 384 nm corresponding to polymer backbone and soret band at 421 nm with Q bands at around 518 and 554 nm in solution. P1 shows photoluminescence emission around 417 nm, whereas P2 and P3 fall around 656 nm. Thermal, electrochemical, and quenching studies of the polymers have been studied and the details are reported.
- 21 July 2016
- Published by Taylor & Francis in Designed Monomers and Polymers
- Vol. 19 (8) , 719-729
Open AccessSynthesis of porphyrin-appended poly(fluorene-alt-carbazole): photoluminescent and electrochemical studies
Poly(fluorene-alt-carbazole) appended with meso-tetraphenylporphyrin (MTPPC) linked through oxyethylene spacer and the parent poly(N-hexyl-2,7-carbazole-alt-9,9-di-n-hexyl fluorene) (P1) were synthesized and characterized. Optical absorption properties of the polymers containing 5% of MTPPC (P2) and 10% of MTPPC (P3) in the polymer backbone show extended optical absorption toward long wavelength compared to the parent polymer P1. Optical absorption studies of the polymers showed that polymer P1 has absorption at 384 nm in solution, whereas polymers P2 and P3 have absorption at 384 nm corresponding to polymer backbone and soret band at 421 nm with Q bands at around 518 and 554 nm in solution. P1 shows photoluminescence emission around 417 nm, whereas P2 and P3 fall around 656 nm. Thermal, electrochemical, and quenching studies of the polymers have been studied and the details are reported.
- 5 February 2016
- Published by Wiley in Polymer International
- Vol. 65 (5) , 535-543
Highly transparent flexible polydimethylsiloxane films – a promising candidate for optoelectronic devices
In the present work, a siloxane based flexible substrate for optoelectronic applications with improved flexibility and high temperature withstanding capacity has been fabricated and the details are reported. The structural and optical properties of the substrate were characterized and the optical transparency is found to be about 90% − 95% in the visible region. The substrate withstands temperatures up to 300 °C without significant degradation and has a low thermal coefficient of expansion. Fourier transform infrared spectral data show the materials in the prepared substrate and SEM studies show the surface and cross‐sectional characteristics of the substrate. It has good mechanical strength, can withstand a high breaking load of 7 N, has a average tensile strength of 48.86 MPa and high average tensile modulus of 127.32 and also possesses excellent surface smoothness and resistance to both chemical and moisture with better rigidity; it will be a long lasting alternative for flexible plastic substrates. The optical characteristics such as refractive index (n) and extinction coefficient (k) are also reported. © 2016 Society of Chemical Industry
- 5 February 2016
- Published by Wiley in Polymer International
- Vol. 65 (5) , 535-543
Highly transparent flexible polydimethylsiloxane films – a promising candidate for optoelectronic devices
In the present work, a siloxane based flexible substrate for optoelectronic applications with improved flexibility and high temperature withstanding capacity has been fabricated and the details are reported. The structural and optical properties of the substrate were characterized and the optical transparency is found to be about 90% − 95% in the visible region. The substrate withstands temperatures up to 300 °C without significant degradation and has a low thermal coefficient of expansion. Fourier transform infrared spectral data show the materials in the prepared substrate and SEM studies show the surface and cross‐sectional characteristics of the substrate. It has good mechanical strength, can withstand a high breaking load of 7 N, has a average tensile strength of 48.86 MPa and high average tensile modulus of 127.32 and also possesses excellent surface smoothness and resistance to both chemical and moisture with better rigidity; it will be a long lasting alternative for flexible plastic substrates. The optical characteristics such as refractive index (n) and extinction coefficient (k) are also reported. © 2016 Society of Chemical Industry
- 28 August 2014
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 6 (21) , 13012-13021
One pot aqueous synthesis of nanoporous Au 85 Pt 15 material with surface bound Pt islands: an efficient methanol tolerant ORR catalyst
Au 85 Pt 15 /C nanoporous material with surface Pt islands synthesized by galvanic replacement reaction (GRR) act as efficient methanol-tolerant ORR catalyst with high figure of merit, mass and specific activities, performing well in full cell studies.
- 28 August 2014
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 6 (21) , 13012-13021
One pot aqueous synthesis of nanoporous Au 85 Pt 15 material with surface bound Pt islands: an efficient methanol tolerant ORR catalyst
Au 85 Pt 15 /C nanoporous material with surface Pt islands synthesized by galvanic replacement reaction (GRR) act as efficient methanol-tolerant ORR catalyst with high figure of merit, mass and specific activities, performing well in full cell studies.