AFAndré Itman Filho

André Itman Filho

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


André Itman Filho has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Influence of Niobium and Molybdenum on Mechanical Strength and Wear Resistance of Microalloyed Steels

    by André Itman Filho, Rosana Vilarim da Silva, Pedro Gabriel Bonella de Oliveira, João Batista Ribeiro Martins, Waldek Wladimir Bose Filho, Martin Strangwood

    The HSLA (High-Strength Low Alloy) steels are used in the production of pipes, flanges and connectors to build ducts for ore, oil and gas transport. The conventional processes are the rolling or forging. In the transport of ore and heavy oil, the abrasive particles impair the surfaces and reduce the pipelines lifetime. Therefore, besides the mechanical properties as API 5L, it is important to verify the wear resistance of these steels. In this context, two microalloyed steels were forged in the form of square bars. Thereafter, specimens of these bars were annealed at 930 ºC, quenched at 900 ºC and tempered at 600 ºC. Tensile and wear tests were performed. The results show that molybdenum and niobium present similar effects on phase transformation of steels, promoting a desired acicular ferrite/bainite microstructure and fulfill the mechanical strength of API 5L-X70 standard. The molybdenum has dominating effect in the hardenability when in solid solution, however, after tempering, thermodynamic simulation by FactSage software indicates that niobium probably promotes secondary hardening.


  • Open Access

    Características de um aço microligado forjado API 5L

    by André Itman Filho, Suzana Souza Silva Scardua, Rosana Vilarim Da Silva, João Batista Ribeiro Martins

    RESUMO Nos aços microligados da série API (American Petroleum Institute) utilizados na fabricação de dutos de grande diâmetro, a resistência mecânica deve ser suficiente para suportar as elevadas pressões do fluido transportado na indústria petroquímica. O aumento da resistência mecânica e da tenacidade para permitir a operação da linha em pressões mais elevadas, sem a ocorrência de colapso da estrutura, é o principal requisito para os aços utilizados nestes dutos. No Brasil, as empresas produzem estes aços por meio da laminação de tiras a quente ou chapas grossas, com adição de nióbio, titânio e vanádio, conforme os requisitos da norma API 5L. Considerando a complexidade geométrica dos componentes utilizados na indústria petroquímica, tais como flanges e centralizadores de tubos, é importante desenvolver um processo alternativo para fabricação de acessórios com as exigências desta norma. Dentro deste contexto e com o objetivo de avaliar novas técnicas de processamento, foi elaborado um aço com composição química similar à de um API 5L X70. O metal líquido foi vazado em uma lingoteira e forjado em barras com secção quadrada. As barras foram recozidas e amostras foram cortadas para confecção de corpos de prova que foram submetidos à têmpera e revenimento em diferentes temperaturas. As análises microestruturais e propriedades mecânicas de dureza e tração, após os tratamentos térmicos, foram comparadas às existentes na literatura para tubos de aços laminados. Os resultados mostram que as condições dos tratamentos térmicos são importantes para desenvolver uma rota alternativa de forjamento controlado, para aços com características da norma API 5L.

  • Open Access

    Effect of niobium in the phase transformation and corrosion resistance of one austenitic-ferritic stainless steel

    by André Itman Filho, Rosana Vilarim Silva, Wandercleiton da Silva Cardoso, Luiz Carlos Casteletti

    Austenitic-ferritic stainless steels containing 0.2% and 0.5% niobium were evaluated with respect to the microstructures, microhardness, pitting potential resistance, electrochemical impedance and wearing tests. Niobium is an alphagenic element and has a great influence on phase transformation of duplex stainless steels. In the present investigation, the samples were annealed at 1050 ºC and aged at 850 ºC to promote the formation of sigma phase. The pitting potential resistance and electrochemical impedance were evaluated in 3.5 % sodium chloride solution. The wear coefficients were calculated by micro-wear tests conducted using a fixed ball machine and aluminum oxide as abrasive. The results show that the niobium content lead to increase on Laves phase formation. This phase, in association with the sigma phase, causes a significant increase in the hardness and wear resistance with a decrease on corrosion resistance of the austenitic-ferritic stainless steels.


  • Open Access

    Austenitic-ferritic stainless steel containing niobium

    by André Itman Filho, Wandercleiton da Silva Cardoso, Leonardo Cabral Gontijo, Rosana Vilarim da Silva, Luiz Carlos Casteletti

    The austenitic-ferritic stainless steels present a better combination of mechanical properties and stress corrosion resistance than the ferritic or austenitic ones. The microstructures of these steels depend on the chemical compositions and heat treatments. In these steels, solidification starts at about 1450ºC with the formation of ferrite, austenite at about 1300ºC and sigma phase in the range of 600 to 950ºC.The latter undertakes the corrosion resistance and the toughness of these steels. According to literature, niobium has a great influence in the transformation phase of austenitic-ferritic stainless steels. This study evaluated the effect of niobium in the microstructure, microhardness and charge transfer resistance of one austenitic-ferritic stainless steel. The samples were annealed at 1050ºC and aged at 850ºC to promote formation of the sigma phase. The corrosion testes were carried out in artificial saliva solution. The addition of 0.5% Nb in the steel led to the formation of the Laves phase.This phase, associated with the sigma phase, increases the hardness of the steel, although with a reduction in the values of the charge transfer resistance.


  • Open Access

    EFEITOS DO NIÓBIO NA TRANSFORMAÇÃO DA FASE SIGMA NO AÇO INOXIDÁVEL AUSTENO-FERRÍTICO SEW 410 NR. 14517

    by Wandercleiton da Silva Cardoso, Pedro Gabriel Bonella de Oliveira, Andre Itman Filho

    PDF | Os aços inoxidáveis duplex apresentam predominância das estruturas ferrítica e austenítica com características singulares para aplicações na indústria petroquímica, onde resistência à corrosão e mecânica são importantes. Conforme a literatura o nióbio tem uma grande influência na transformação das fases ferríticas e austeníticas dos aços duplex, além de o refino de grão da microestrutura. A fase sigma, rica em cromo e molibdênio, é formada principalmente durante aquecimento na faixa de temperatura entre 600 a 900oC. A proposta deste estudo é avaliar a influência do nióbio no aço inoxidável austeno-ferrítico SEW 410 Nr 14517 na formação de fase sigma após tratamentos térmicos em temperaturas próximas a 850oC. Testes galvanostáticos foram realizados para observar a influência das quantidades de fases no potencial de pite deste aço em solução salina com 3,5% de cloreto de sódio. Os resultados mostraram que o aumento da fase sigma proporcionou um acréscimo da dureza e redução do potencial de pite.